mirror/freebsd
1
0
Fork 0
mirror of https://git.FreeBSD.org/src.git synced 2025-01-17 15:27:36 +00:00
Code Issues Releases Activity

Removed all `vector xxxintr' specifications. Interrupt handlers are now

Browse Source 
configured in drivers.
This commit is contained in:
Bruce Evans 1998-10-22 15:39:35 +00:00
parent 291adf9b21
commit 43a2c34c47
Notes: svn2git 2020-12-20 02:59:44 +00:00 
svn path=/head/; revision=40587
5 changed files with 20 additions and 21 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

4
sys/i386/isa/README.le
View File

@ -1,4 +1,4 @@
$Id$
$Id: README.le,v 1.4 1997/02/22 09:35:49 peter Exp $
----------------
@ -38,7 +38,7 @@ i386/conf/files.i386 file.
After that is done you will need to edit your config file (in
i386/conf) and a line similar to:
device le0 at isa? port 0x300 net irq 5 iomem 0xd0000 vector le_intr
device le0 at isa? port 0x300 net irq 5 iomem 0xd0000
[The above line assumes the board is still at the factory defaults.]
Change the port, irq, and iomem value if needed to your configuration.

2
sys/i386/isa/README.stl
View File

@ -328,7 +328,7 @@ i386/isa/stallion.c optional stl device-driver
- enter a line for each board that you want to use. For stallion.c
boards entries should look like:
device stl0 at isa? port 0x2a0 tty irq 10 vector stlintr
device stl0 at isa? port 0x2a0 tty irq 10
For istallion.c boards, the entries should look like:

15
sys/i386/isa/snd/README
View File

@ -69,7 +69,7 @@ APPLICATIONS:
controller pnp0 # this is required for PnP support
device pcm0 at isa ? port? tty irq N drq D flags F vector pcmintr
device pcm0 at isa ? port? tty irq N drq D flags F
where
@ -95,13 +95,13 @@ APPLICATIONS:
You can use multiple sound cards, in which case you need more
lines like
device pcm1 at isa ? port? tty irq N drq D flags F vector pcmintr
device pcm2 at isa ? port? tty irq N drq D flags F vector pcmintr
device pcm1 at isa ? port? tty irq N drq D flags F
device pcm2 at isa ? port? tty irq N drq D flags F
...
EXAMPLES: a typical "device" line for the SB16 (full duplex) is
device pcm0 at isa ? port? tty irq 5 drq 1 flags 0x15 vector pcmintr
device pcm0 at isa ? port? tty irq 5 drq 1 flags 0x15
The driver will check at the default addresses (or the one you
specify) which type of SoundBlaster you have (1.5, 2.0, 3.X
@ -113,7 +113,7 @@ APPLICATIONS:
For a WSS-compatible codec (non PnP) working in full duplex using
dma channels 1 and 3, you can specify:
device pcm0 at isa ? port 0x530 tty irq 7 drq 1 flags 0x13 vector pcmintr
device pcm0 at isa ? port 0x530 tty irq 7 drq 1 flags 0x13
(0x530 is a default if no port address is specified). The
"flags 0x13" specifies that you have a dual dma board with
@ -130,10 +130,9 @@ APPLICATIONS:
For PnP cards, only the line for "pcm0" is needed (the code
will allocate entries for more cards if found), but IT MUST
INCLUDE ALL FIELDS, including "vector pcmintr". You can use
the following line:
INCLUDE ALL FIELDS. You can use the following line:
device pcm0 at isa ? port? tty irq 7 drq 1 vector pcmintr
device pcm0 at isa ? port? tty irq 7 drq 1
NOTE that:
- the parameters for the PnP device(s) will be read from the

6
sys/i386/isa/sound/README.FREEBSD
View File

@ -90,7 +90,7 @@ Lugi also has Sujal's PnP driver .
This is my kernel configuration for my SB16 PnP:
controller snd0
device sb0 at isa? port 0x220 irq 10 conflicts drq 3 vector sbintr
device sb0 at isa? port 0x220 irq 10 conflicts drq 3
device sbxvi0 at isa? port? irq? drq 5 conflicts
device opl0 at isa? port 0x388 conflicts
device sbmidi0 at isa? port 0x300 irq? conflicts
@ -123,13 +123,13 @@ To configure your guspnp PRO if you have a motherboard which supports
PnP:
controller snd0
device gus0 at isa? vector gusintr
device gus0 at isa?
NONPNP CONFIGURATION
To configure your guspnp PRO if your motherboard does NOT support
PnP:
device gus0 at isa? port 0x220 irq 11 drq 1 flags 0x3 vector gusintr
device gus0 at isa? port 0x220 irq 11 drq 1 flags 0x3
the gus pnp is fully software configurable and the above configuration

14
sys/i386/isa/sound/sound.doc
View File

@ -1,4 +1,4 @@
$Id$
$Id: sound.doc,v 1.8 1997/02/22 09:38:15 peter Exp $
Instructions on using audio on a FreeBSD 2.1 (or 2.0-current) system.
See also /sys/i386/conf/LINT.
@ -14,10 +14,10 @@ Uncomment one or more of these device entries, depending on what type of
sound card you have:
# ProAudioSpectrum PCM and Midi - for PAS
#device pas0 at isa? port 0x388 irq 10 drq 6 vector pasintr
#device pas0 at isa? port 0x388 irq 10 drq 6
# SoundBlaster DSP driver - for SB, SB Pro, SB16, PAS(emulating SB)
#device sb0 at isa? port 0x220 irq 7 drq 1 vector sbintr
#device sb0 at isa? port 0x220 irq 7 drq 1
# SoundBlaster 16 DSP driver - for SB16 - requires sb0 device
#device sbxvi0 at isa? drq 5
@ -28,13 +28,13 @@ sound card you have:
# Gravis UltraSound - for GUS, GUS16, GUSMAX
# For cards that use 2 DMA Channels:
# drq = Write DMA Channel, flags = Read DMA Channel
#device gus0 at isa? port 0x220 irq 11 drq 1 flags 0x3 vector gusintr
#device gus0 at isa? port 0x220 irq 11 drq 1 flags 0x3
# Gravis UltraSound 16 bit option - for GUS16 - requires gus0
#device gusxvi0 at isa? port 0x530 irq 7 drq 3 vector adintr
#device gusxvi0 at isa? port 0x530 irq 7 drq 3
# MS Sound System (AD1848 Based Boards)
#device mss0 at isa? port 0x530 irq 10 drq 1 vector adintr
#device mss0 at isa? port 0x530 irq 10 drq 1
# Yamaha OPL-2/OPL-3 FM - for SB, SB Pro, SB16, PAS
#device opl0 at isa? port 0x388
@ -43,7 +43,7 @@ sound card you have:
#device mpu0 at isa? port 0x330 irq 6 drq 0
# 6850 UART Midi
#device uart0 at isa? port 0x330 irq 5 vector "m6850intr"
#device uart0 at isa? port 0x330 irq 5
You may add one or more of the following depending on what you do and don't
want compiled into your kernel. Note: Excluding things with EXCLUDE_...