mirror/freebsd
1
0
Fork 0
mirror of https://git.FreeBSD.org/src.git synced 2024-12-20 11:11:24 +00:00
Code Issues Releases Activity

Add initial 11n support to if_rsu.

Browse Source 
* Add a tunable to enable 11n if it's available, so to not anger people
  who upgrade.

  kenv hw.usb.rsu.enable_11n=1 before inserting the device.

* Add initial 11n htconfig bits;
* Enable 40MHz mode if it's available;
* Add 11n channels;
* Set 11n bits in the firmware.

It works for RX; I haven't tested TX aggregation just yet.
However the firmware doesn't do RX re-ordering, so I have to tie it into
the net80211 A-MPDU RX reorder path before I flip this on by default.

I've verified that I'm indeed actually seeing MCS 0->7 rates being received.
I haven't dug into whether it's actually transmitting 11n rates; I'll dig into
that later.
This commit is contained in:
Adrian Chadd 2015-09-18 04:12:11 +00:00
parent 4eadefc260
commit 4b9d9eee03
Notes: svn2git 2020-12-20 02:59:44 +00:00 
svn path=/head/; revision=287947
1 changed files with 41 additions and 21 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

62
sys/dev/usb/wlan/if_rsu.c
View File

@ -84,6 +84,9 @@ SYSCTL_INT(_hw_usb_rsu, OID_AUTO, debug, CTLFLAG_RWTUN, &rsu_debug, 0,
#define RSU_DPRINTF(_sc, _flg, ...)
#endif
static int rsu_enable_11n = 0;
TUNABLE_INT("hw.usb.rsu.enable_11n", &rsu_enable_11n);
#define RSU_DEBUG_ANY 0xffffffff
#define RSU_DEBUG_TX 0x00000001
#define RSU_DEBUG_RX 0x00000002
@ -357,7 +360,8 @@ rsu_attach(device_t self)
device_set_usb_desc(self);
sc->sc_udev = uaa->device;
sc->sc_dev = self;
sc->sc_ht = !! (USB_GET_DRIVER_INFO(uaa) & RSU_HT_SUPPORTED);
if (rsu_enable_11n)
sc->sc_ht = !! (USB_GET_DRIVER_INFO(uaa) & RSU_HT_SUPPORTED);
/* Get number of endpoints */
iface = usbd_get_iface(sc->sc_udev, 0);
@ -429,23 +433,30 @@ rsu_attach(device_t self)
IEEE80211_C_SHSLOT | /* Short slot time supported. */
IEEE80211_C_WPA; /* WPA/RSN. */
#if 0
/* Check if HT support is present. */
if (usb_lookup(rsu_devs_noht, uaa->vendor, uaa->product) == NULL) {
/* Set HT capabilities. */
ic->ic_htcaps =
IEEE80211_HTCAP_CBW20_40 |
IEEE80211_HTCAP_DSSSCCK40;
/* Set supported HT rates. */
for (i = 0; i < 2; i++)
ic->ic_sup_mcs[i] = 0xff;
if (sc->sc_ht) {
device_printf(sc->sc_dev, "%s: enabling 11n\n", __func__);
/* Enable basic HT */
ic->ic_htcaps = IEEE80211_HTC_HT |
IEEE80211_HTC_AMPDU |
IEEE80211_HTC_AMSDU |
IEEE80211_HTCAP_MAXAMSDU_3839 |
IEEE80211_HTCAP_SMPS_OFF;
ic->ic_htcaps |= IEEE80211_HTCAP_CHWIDTH40;
/* set number of spatial streams */
ic->ic_txstream = 1;
ic->ic_rxstream = 1;
}
#endif
/* Set supported .11b and .11g rates. */
bands = 0;
setbit(&bands, IEEE80211_MODE_11B);
setbit(&bands, IEEE80211_MODE_11G);
if (sc->sc_ht)
setbit(&bands, IEEE80211_MODE_11NG);
ieee80211_init_channels(ic, NULL, &bands);
ieee80211_ifattach(ic);
@ -1180,6 +1191,9 @@ rsu_join_bss(struct rsu_softc *sc, struct ieee80211_node *ni)
frm = ieee80211_add_rsn(frm, vap);
frm = ieee80211_add_wpa(frm, vap);
frm = ieee80211_add_qos(frm, ni);
if ((ic->ic_flags & IEEE80211_F_WME) &&
(ni->ni_ies.wme_ie != NULL))
frm = ieee80211_add_wme_info(frm, &ic->ic_wme);
if (ni->ni_flags & IEEE80211_NODE_HT)
frm = ieee80211_add_htcap(frm, ni);
bss->ieslen = htole32(frm - (uint8_t *)fixed);
@ -1314,8 +1328,7 @@ rsu_rx_event(struct rsu_softc *sc, uint8_t code, uint8_t *buf, int len)
"%s: Rx event code=%d len=%d\n", __func__, code, len);
switch (code) {
case R92S_EVT_SURVEY:
if (vap->iv_state == IEEE80211_S_SCAN)
rsu_event_survey(sc, buf, len);
rsu_event_survey(sc, buf, len);
break;
case R92S_EVT_SURVEY_DONE:
RSU_DPRINTF(sc, RSU_DEBUG_SCAN,
@ -1325,6 +1338,7 @@ rsu_rx_event(struct rsu_softc *sc, uint8_t code, uint8_t *buf, int len)
break; /* Ignore if not scanning. */
if (sc->sc_scan_pass == 0 && vap->iv_des_nssid != 0) {
/* Schedule a directed scan for hidden APs. */
/* XXX bad! */
sc->sc_scan_pass = 1;
RSU_UNLOCK(sc);
ieee80211_new_state(vap, IEEE80211_S_SCAN, -1);
@ -1806,6 +1820,13 @@ rsu_tx_start(struct rsu_softc *sc, struct ieee80211_node *ni,
}
hasqos = 0;
#endif
RSU_DPRINTF(sc, RSU_DEBUG_TX, "%s: pri=%d, which=%d, hasqos=%d\n",
__func__,
prio,
which,
hasqos);
/* Fill Tx descriptor. */
txd = (struct r92s_tx_desc *)data->buf;
memset(txd, 0, sizeof(*txd));
@ -1839,6 +1860,7 @@ rsu_tx_start(struct rsu_softc *sc, struct ieee80211_node *ni,
SM(R92S_TXDW1_KEYIDX, k->k_id));
}
#endif
/* XXX todo: set AGGEN bit if appropriate? */
txd->txdw2 |= htole32(R92S_TXDW2_BK);
if (IEEE80211_IS_MULTICAST(wh->i_addr1))
txd->txdw2 |= htole32(R92S_TXDW2_BMCAST);
@ -2212,6 +2234,7 @@ rsu_load_firmware(struct rsu_softc *sc)
{
const struct r92s_fw_hdr *hdr;
struct r92s_fw_priv *dmem;
struct ieee80211com *ic = &sc->sc_ic;
const uint8_t *imem, *emem;
int imemsz, ememsz;
const struct firmware *fw;
@ -2348,10 +2371,11 @@ rsu_load_firmware(struct rsu_softc *sc)
dmem->rf_config = 0x11; /* 1T1R */
dmem->vcs_type = R92S_VCS_TYPE_AUTO;
dmem->vcs_mode = R92S_VCS_MODE_RTS_CTS;
#ifdef notyet
dmem->bw40_en = (ic->ic_htcaps & IEEE80211_HTCAP_CBW20_40) != 0;
#endif
dmem->turbo_mode = 0;
dmem->bw40_en = !! (ic->ic_htcaps & IEEE80211_HTCAP_CHWIDTH40);
dmem->amsdu2ampdu_en = !! (sc->sc_ht);
dmem->ampdu_en = !! (sc->sc_ht);
dmem->agg_offload = !! (sc->sc_ht);
dmem->qos_en = 1;
/* Load DMEM section. */
error = rsu_fw_loadsection(sc, (uint8_t *)dmem, sizeof(*dmem));
@ -2504,8 +2528,7 @@ rsu_init(struct rsu_softc *sc)
goto fail;
}
#if 0
if (ic->ic_htcaps & IEEE80211_HTCAP_CBW20_40) {
if (ic->ic_htcaps & IEEE80211_HTCAP_CHWIDTH40) {
/* Enable 40MHz mode. */
error = rsu_fw_iocmd(sc,
SM(R92S_IOCMD_CLASS, 0xf4) |
@ -2518,9 +2541,6 @@ rsu_init(struct rsu_softc *sc)
}
}
/* Set default channel. */
ic->ic_bss->ni_chan = ic->ic_ibss_chan;
#endif
sc->sc_scan_pass = 0;
usbd_transfer_start(sc->sc_xfer[RSU_BULK_RX]);