mirror of
https://git.FreeBSD.org/src.git
synced 2024-12-24 11:29:10 +00:00
- Loop up to 3 seconds when waiting for a device to get ready. [1]
- Make the device description match the driver name. - Identify the chip variant based on the JEDEC and use that information to use the proper values for page count, offset and size instead of hardcoding a AT45DB642x with 2^N byte page support disabled. - Take advantage of bioq_takefirst(). - Given that CONTINUOUS_ARRAY_READ_HF (0x0b) command isn't even mentioned in Atmel's DataFlash Application Note, as suggested by the previous comment may not work on all all devices and actually doesn't properly on at least AT45DB321D (JEDEC 0x1f2701), rewrite at45d_task() to use CONTINUOUS_ARRAY_READ (0xe8) for reading instead. This rewrite is laid out in a way allowing to easily add support for BIO_DELETE later on. - Add support for reads and writes not starting on a page boundary. - Verify the flash content after writing. - Let at45d_task() gracefully handle errors on SPI transfers and the device not becoming ready afterwards again. [1] - Use DEVMETHOD_END. [1] - Use NULL instead of 0 for pointers. [1] Additional testing by: Ian Lepore Submitted by: Ian Lepore [1] MFC after: 1 week
This commit is contained in:
Marius Strobl
parent
31a2c906d7
commit
7f2107d400
Notes:
svn2git
2020-12-20 02:59:44 +00:00
svn path=/head/; revision=236496
@ -1,5 +1,8 @@
|
||||
/*-
|
||||
* Copyright (c) 2006 M. Warner Losh. All rights reserved.
|
||||
* Copyright (c) 2006 M. Warner Losh
|
||||
* Copyright (c) 2011-2012 Ian Lepore
|
||||
* Copyright (c) 2012 Marius Strobl <marius@FreeBSD.org>
|
||||
* All rights reserved.
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted provided that the following conditions
|
||||
@ -42,44 +45,82 @@ __FBSDID("$FreeBSD$");
|
||||
#include <dev/spibus/spi.h>
|
||||
#include "spibus_if.h"
|
||||
|
||||
struct at45d_softc
|
||||
struct at45d_flash_ident
|
||||
{
|
||||
struct intr_config_hook config_intrhook;
|
||||
device_t dev;
|
||||
struct mtx sc_mtx;
|
||||
struct disk *disk;
|
||||
struct proc *p;
|
||||
struct bio_queue_head bio_queue;
|
||||
const char *name;
|
||||
uint32_t jedec;
|
||||
uint16_t pagecount;
|
||||
uint16_t pageoffset;
|
||||
uint16_t pagesize;
|
||||
uint16_t pagesize2n;
|
||||
};
|
||||
|
||||
#define AT45D_LOCK(_sc) mtx_lock(&(_sc)->sc_mtx)
|
||||
struct at45d_softc
|
||||
{
|
||||
struct bio_queue_head bio_queue;
|
||||
struct mtx sc_mtx;
|
||||
struct disk *disk;
|
||||
struct proc *p;
|
||||
struct intr_config_hook config_intrhook;
|
||||
device_t dev;
|
||||
uint16_t pagecount;
|
||||
uint16_t pageoffset;
|
||||
uint16_t pagesize;
|
||||
};
|
||||
|
||||
#define AT45D_LOCK(_sc) mtx_lock(&(_sc)->sc_mtx)
|
||||
#define AT45D_UNLOCK(_sc) mtx_unlock(&(_sc)->sc_mtx)
|
||||
#define AT45D_LOCK_INIT(_sc) \
|
||||
#define AT45D_LOCK_INIT(_sc) \
|
||||
mtx_init(&_sc->sc_mtx, device_get_nameunit(_sc->dev), \
|
||||
"at45d", MTX_DEF)
|
||||
#define AT45D_LOCK_DESTROY(_sc) mtx_destroy(&_sc->sc_mtx);
|
||||
#define AT45D_ASSERT_LOCKED(_sc) mtx_assert(&_sc->sc_mtx, MA_OWNED);
|
||||
#define AT45D_ASSERT_UNLOCKED(_sc) mtx_assert(&_sc->sc_mtx, MA_NOTOWNED);
|
||||
#define AT45D_LOCK_DESTROY(_sc) mtx_destroy(&_sc->sc_mtx);
|
||||
#define AT45D_ASSERT_LOCKED(_sc) mtx_assert(&_sc->sc_mtx, MA_OWNED);
|
||||
#define AT45D_ASSERT_UNLOCKED(_sc) mtx_assert(&_sc->sc_mtx, MA_NOTOWNED);
|
||||
|
||||
static void at45d_delayed_attach(void *xsc);
|
||||
/* bus entry points */
|
||||
static device_attach_t at45d_attach;
|
||||
static device_detach_t at45d_detach;
|
||||
static device_probe_t at45d_probe;
|
||||
|
||||
/* disk routines */
|
||||
static int at45d_open(struct disk *dp);
|
||||
static int at45d_close(struct disk *dp);
|
||||
static int at45d_open(struct disk *dp);
|
||||
static void at45d_strategy(struct bio *bp);
|
||||
static void at45d_task(void *arg);
|
||||
|
||||
#define CONTINUOUS_ARRAY_READ 0xE8
|
||||
#define CONTINUOUS_ARRAY_READ_HF 0x0B
|
||||
#define CONTINUOUS_ARRAY_READ_LF 0x03
|
||||
#define STATUS_REGISTER_READ 0xD7
|
||||
#define PROGRAM_THROUGH_BUFFER 0x82
|
||||
#define MANUFACTURER_ID 0x9F
|
||||
/* helper routines */
|
||||
static void at45d_delayed_attach(void *xsc);
|
||||
static int at45d_get_mfg_info(device_t dev, uint8_t *resp);
|
||||
static int at45d_get_status(device_t dev, uint8_t *status);
|
||||
static int at45d_wait_ready(device_t dev, uint8_t *status);
|
||||
|
||||
static uint8_t
|
||||
at45d_get_status(device_t dev)
|
||||
#define BUFFER_TRANSFER 0x53
|
||||
#define BUFFER_COMPARE 0x60
|
||||
#define PROGRAM_THROUGH_BUFFER 0x82
|
||||
#define MANUFACTURER_ID 0x9f
|
||||
#define STATUS_REGISTER_READ 0xd7
|
||||
#define CONTINUOUS_ARRAY_READ 0xe8
|
||||
|
||||
/*
|
||||
* A sectorsize2n != 0 is used to indicate that a device optionally supports
|
||||
* 2^N byte pages. If support for the latter is enabled, the sector offset
|
||||
* has to be reduced by one.
|
||||
*/
|
||||
static const struct at45d_flash_ident const at45d_flash_devices[] = {
|
||||
{ "AT45DB011B", 0x1f2200, 512, 9, 264, 256 },
|
||||
{ "AT45DB021B", 0x1f2300, 1024, 9, 264, 256 },
|
||||
{ "AT45DB041x", 0x1f2400, 2028, 9, 264, 256 },
|
||||
{ "AT45DB081B", 0x1f2500, 4096, 9, 264, 256 },
|
||||
{ "AT45DB161x", 0x1f2600, 4096, 10, 528, 512 },
|
||||
{ "AT45DB321x", 0x1f2700, 8192, 10, 528, 0 },
|
||||
{ "AT45DB321x", 0x1f2701, 8192, 10, 528, 512 },
|
||||
{ "AT45DB642x", 0x1f2800, 8192, 11, 1056, 1024 }
|
||||
};
|
||||
|
||||
static int
|
||||
at45d_get_status(device_t dev, uint8_t *status)
|
||||
{
|
||||
uint8_t txBuf[8], rxBuf[8];
|
||||
uint8_t rxBuf[8], txBuf[8];
|
||||
struct spi_command cmd;
|
||||
int err;
|
||||
|
||||
@ -90,23 +131,16 @@ at45d_get_status(device_t dev)
|
||||
txBuf[0] = STATUS_REGISTER_READ;
|
||||
cmd.tx_cmd = txBuf;
|
||||
cmd.rx_cmd = rxBuf;
|
||||
cmd.rx_cmd_sz = 2;
|
||||
cmd.tx_cmd_sz = 2;
|
||||
cmd.rx_cmd_sz = cmd.tx_cmd_sz = 2;
|
||||
err = SPIBUS_TRANSFER(device_get_parent(dev), dev, &cmd);
|
||||
return (rxBuf[1]);
|
||||
}
|
||||
|
||||
static void
|
||||
at45d_wait_for_device_ready(device_t dev)
|
||||
{
|
||||
while (!(at45d_get_status(dev) & 0x80))
|
||||
continue;
|
||||
*status = rxBuf[1];
|
||||
return (err);
|
||||
}
|
||||
|
||||
static int
|
||||
at45d_get_mfg_info(device_t dev, uint8_t *resp)
|
||||
{
|
||||
uint8_t txBuf[8], rxBuf[8];
|
||||
uint8_t rxBuf[8], txBuf[8];
|
||||
struct spi_command cmd;
|
||||
int err;
|
||||
|
||||
@ -117,22 +151,37 @@ at45d_get_mfg_info(device_t dev, uint8_t *resp)
|
||||
txBuf[0] = MANUFACTURER_ID;
|
||||
cmd.tx_cmd = &txBuf;
|
||||
cmd.rx_cmd = &rxBuf;
|
||||
cmd.tx_cmd_sz = 5;
|
||||
cmd.rx_cmd_sz = 5;
|
||||
cmd.tx_cmd_sz = cmd.rx_cmd_sz = 5;
|
||||
err = SPIBUS_TRANSFER(device_get_parent(dev), dev, &cmd);
|
||||
if (err)
|
||||
return (err);
|
||||
memcpy(resp, rxBuf + 1, 4);
|
||||
// XXX We really should 'decode' the reply into some kind of
|
||||
// XXX structure. To be generic (and not just for atmel parts)
|
||||
// XXX we'd have to loop until we got a full reply.
|
||||
return (0);
|
||||
}
|
||||
|
||||
static int
|
||||
at45d_wait_ready(device_t dev, uint8_t *status)
|
||||
{
|
||||
struct timeval now, tout;
|
||||
int err;
|
||||
|
||||
getmicrouptime(&tout);
|
||||
tout.tv_sec += 3;
|
||||
do {
|
||||
getmicrouptime(&now);
|
||||
if (now.tv_sec > tout.tv_sec)
|
||||
err = ETIMEDOUT;
|
||||
else
|
||||
err = at45d_get_status(dev, status);
|
||||
} while (err == 0 && (*status & 0x80) == 0);
|
||||
return (err);
|
||||
}
|
||||
|
||||
static int
|
||||
at45d_probe(device_t dev)
|
||||
{
|
||||
device_set_desc(dev, "AT45 Flash Family");
|
||||
|
||||
device_set_desc(dev, "AT45D Flash Family");
|
||||
return (0);
|
||||
}
|
||||
|
||||
@ -156,31 +205,66 @@ at45d_attach(device_t dev)
|
||||
static int
|
||||
at45d_detach(device_t dev)
|
||||
{
|
||||
return EIO;
|
||||
|
||||
return (EBUSY) /* XXX */;
|
||||
}
|
||||
|
||||
static void
|
||||
at45d_delayed_attach(void *xsc)
|
||||
{
|
||||
struct at45d_softc *sc = xsc;
|
||||
uint8_t buf[4];
|
||||
|
||||
at45d_get_mfg_info(sc->dev, buf);
|
||||
at45d_wait_for_device_ready(sc->dev);
|
||||
struct at45d_softc *sc;
|
||||
const struct at45d_flash_ident *ident;
|
||||
u_int i;
|
||||
uint32_t jedec;
|
||||
uint16_t pagesize;
|
||||
uint8_t buf[4], status;
|
||||
|
||||
sc->disk = disk_alloc();
|
||||
sc->disk->d_open = at45d_open;
|
||||
sc->disk->d_close = at45d_close;
|
||||
sc->disk->d_strategy = at45d_strategy;
|
||||
sc->disk->d_name = "flash/spi";
|
||||
sc->disk->d_drv1 = sc;
|
||||
sc->disk->d_maxsize = DFLTPHYS;
|
||||
sc->disk->d_sectorsize = 1056; /* XXX */
|
||||
sc->disk->d_mediasize = 8192 * 1056; /* XXX */
|
||||
sc->disk->d_unit = device_get_unit(sc->dev);
|
||||
disk_create(sc->disk, DISK_VERSION);
|
||||
bioq_init(&sc->bio_queue);
|
||||
kproc_create(&at45d_task, sc, &sc->p, 0, 0, "task: at45d flash");
|
||||
sc = xsc;
|
||||
ident = NULL;
|
||||
jedec = 0;
|
||||
|
||||
if (at45d_wait_ready(sc->dev, &status) != 0)
|
||||
device_printf(sc->dev, "Error waiting for device-ready.\n");
|
||||
else if (at45d_get_mfg_info(sc->dev, buf) != 0)
|
||||
device_printf(sc->dev, "Failed to get ID.\n");
|
||||
else {
|
||||
jedec = buf[0] << 16 | buf[1] << 8 | buf[2];
|
||||
for (i = 0; i < nitems(at45d_flash_devices); i++) {
|
||||
if (at45d_flash_devices[i].jedec == jedec) {
|
||||
ident = &at45d_flash_devices[i];
|
||||
break;
|
||||
}
|
||||
}
|
||||
}
|
||||
if (ident == NULL)
|
||||
device_printf(sc->dev, "JEDEC 0x%x not in list.\n", jedec);
|
||||
else {
|
||||
sc->pagecount = ident->pagecount;
|
||||
sc->pageoffset = ident->pageoffset;
|
||||
if (ident->pagesize2n != 0 && (status & 0x01) != 0) {
|
||||
sc->pageoffset -= 1;
|
||||
pagesize = ident->pagesize2n;
|
||||
} else
|
||||
pagesize = ident->pagesize;
|
||||
sc->pagesize = pagesize;
|
||||
|
||||
sc->disk = disk_alloc();
|
||||
sc->disk->d_open = at45d_open;
|
||||
sc->disk->d_close = at45d_close;
|
||||
sc->disk->d_strategy = at45d_strategy;
|
||||
sc->disk->d_name = "flash/spi";
|
||||
sc->disk->d_drv1 = sc;
|
||||
sc->disk->d_maxsize = DFLTPHYS;
|
||||
sc->disk->d_sectorsize = pagesize;
|
||||
sc->disk->d_mediasize = pagesize * ident->pagecount;
|
||||
sc->disk->d_unit = device_get_unit(sc->dev);
|
||||
disk_create(sc->disk, DISK_VERSION);
|
||||
bioq_init(&sc->bio_queue);
|
||||
kproc_create(&at45d_task, sc, &sc->p, 0, 0,
|
||||
"task: at45d flash");
|
||||
device_printf(sc->dev, "%s, %d bytes per page, %d pages\n",
|
||||
ident->name, pagesize, ident->pagecount);
|
||||
}
|
||||
|
||||
config_intrhook_disestablish(&sc->config_intrhook);
|
||||
}
|
||||
@ -188,13 +272,15 @@ at45d_delayed_attach(void *xsc)
|
||||
static int
|
||||
at45d_open(struct disk *dp)
|
||||
{
|
||||
return 0;
|
||||
|
||||
return (0);
|
||||
}
|
||||
|
||||
static int
|
||||
at45d_close(struct disk *dp)
|
||||
{
|
||||
return 0;
|
||||
|
||||
return (0);
|
||||
}
|
||||
|
||||
static void
|
||||
@ -212,53 +298,132 @@ at45d_strategy(struct bio *bp)
|
||||
static void
|
||||
at45d_task(void *arg)
|
||||
{
|
||||
struct at45d_softc *sc = (struct at45d_softc*)arg;
|
||||
uint8_t rxBuf[8], txBuf[8];
|
||||
struct at45d_softc *sc;
|
||||
struct bio *bp;
|
||||
uint8_t txBuf[8], rxBuf[8];
|
||||
struct spi_command cmd;
|
||||
int sz;
|
||||
daddr_t block, end;
|
||||
device_t dev, pdev;
|
||||
int err;
|
||||
caddr_t buf;
|
||||
u_long len, resid;
|
||||
u_int addr, berr, err, offset, page;
|
||||
uint8_t status;
|
||||
|
||||
sc = (struct at45d_softc*)arg;
|
||||
dev = sc->dev;
|
||||
pdev = device_get_parent(dev);
|
||||
memset(&cmd, 0, sizeof(cmd));
|
||||
memset(txBuf, 0, sizeof(txBuf));
|
||||
memset(rxBuf, 0, sizeof(rxBuf));
|
||||
cmd.tx_cmd = txBuf;
|
||||
cmd.rx_cmd = rxBuf;
|
||||
|
||||
for (;;) {
|
||||
dev = sc->dev;
|
||||
pdev = device_get_parent(dev);
|
||||
AT45D_LOCK(sc);
|
||||
do {
|
||||
bp = bioq_first(&sc->bio_queue);
|
||||
bp = bioq_takefirst(&sc->bio_queue);
|
||||
if (bp == NULL)
|
||||
msleep(sc, &sc->sc_mtx, PRIBIO, "jobqueue", 0);
|
||||
} while (bp == NULL);
|
||||
bioq_remove(&sc->bio_queue, bp);
|
||||
AT45D_UNLOCK(sc);
|
||||
sz = sc->disk->d_sectorsize;
|
||||
end = bp->bio_pblkno + (bp->bio_bcount / sz);
|
||||
for (block = bp->bio_pblkno; block < end; block++) {
|
||||
char *vaddr = bp->bio_data + (block - bp->bio_pblkno) * sz;
|
||||
if (bp->bio_cmd == BIO_READ) {
|
||||
txBuf[0] = CONTINUOUS_ARRAY_READ_HF;
|
||||
cmd.tx_cmd_sz = 5;
|
||||
cmd.rx_cmd_sz = 5;
|
||||
} else {
|
||||
txBuf[0] = PROGRAM_THROUGH_BUFFER;
|
||||
cmd.tx_cmd_sz = 4;
|
||||
cmd.rx_cmd_sz = 4;
|
||||
}
|
||||
// XXX only works on certain devices... Fixme
|
||||
txBuf[1] = ((block >> 5) & 0xFF);
|
||||
txBuf[2] = ((block << 3) & 0xF8);
|
||||
txBuf[3] = 0;
|
||||
txBuf[4] = 0;
|
||||
cmd.tx_cmd = txBuf;
|
||||
cmd.rx_cmd = rxBuf;
|
||||
cmd.tx_data = vaddr;
|
||||
cmd.tx_data_sz = sz;
|
||||
cmd.rx_data = vaddr;
|
||||
cmd.rx_data_sz = sz;
|
||||
err = SPIBUS_TRANSFER(pdev, dev, &cmd);
|
||||
// XXX err check?
|
||||
|
||||
berr = 0;
|
||||
buf = bp->bio_data;
|
||||
len = resid = bp->bio_bcount;
|
||||
page = bp->bio_offset / sc->pagesize;
|
||||
offset = bp->bio_offset % sc->pagesize;
|
||||
|
||||
switch (bp->bio_cmd) {
|
||||
case BIO_READ:
|
||||
txBuf[0] = CONTINUOUS_ARRAY_READ;
|
||||
cmd.tx_cmd_sz = cmd.rx_cmd_sz = 8;
|
||||
cmd.tx_data = cmd.rx_data = buf;
|
||||
break;
|
||||
case BIO_WRITE:
|
||||
cmd.tx_cmd_sz = cmd.rx_cmd_sz = 4;
|
||||
cmd.tx_data = cmd.rx_data = buf;
|
||||
if (resid + offset > sc->pagesize)
|
||||
len = sc->pagesize - offset;
|
||||
break;
|
||||
default:
|
||||
berr = EINVAL;
|
||||
goto out;
|
||||
}
|
||||
|
||||
/*
|
||||
* NB: for BIO_READ, this loop is only traversed once.
|
||||
*/
|
||||
while (resid > 0) {
|
||||
if (page > sc->pagecount) {
|
||||
berr = EINVAL;
|
||||
goto out;
|
||||
}
|
||||
addr = page << sc->pageoffset;
|
||||
if (bp->bio_cmd == BIO_WRITE) {
|
||||
if (len != sc->pagesize) {
|
||||
txBuf[0] = BUFFER_TRANSFER;
|
||||
txBuf[1] = ((addr >> 16) & 0xff);
|
||||
txBuf[2] = ((addr >> 8) & 0xff);
|
||||
txBuf[3] = 0;
|
||||
cmd.tx_data_sz = cmd.rx_data_sz = 0;
|
||||
err = SPIBUS_TRANSFER(pdev, dev,
|
||||
&cmd);
|
||||
if (err == 0)
|
||||
err = at45d_wait_ready(dev,
|
||||
&status);
|
||||
if (err != 0) {
|
||||
berr = EIO;
|
||||
goto out;
|
||||
}
|
||||
}
|
||||
txBuf[0] = PROGRAM_THROUGH_BUFFER;
|
||||
}
|
||||
|
||||
addr += offset;
|
||||
txBuf[1] = ((addr >> 16) & 0xff);
|
||||
txBuf[2] = ((addr >> 8) & 0xff);
|
||||
txBuf[3] = (addr & 0xff);
|
||||
cmd.tx_data_sz = cmd.rx_data_sz = len;
|
||||
err = SPIBUS_TRANSFER(pdev, dev, &cmd);
|
||||
if (err == 0 && bp->bio_cmd != BIO_READ)
|
||||
err = at45d_wait_ready(dev, &status);
|
||||
if (err != 0) {
|
||||
berr = EIO;
|
||||
goto out;
|
||||
}
|
||||
if (bp->bio_cmd == BIO_WRITE) {
|
||||
addr = page << sc->pageoffset;
|
||||
txBuf[0] = BUFFER_COMPARE;
|
||||
txBuf[1] = ((addr >> 16) & 0xff);
|
||||
txBuf[2] = ((addr >> 8) & 0xff);
|
||||
txBuf[3] = 0;
|
||||
cmd.tx_data_sz = cmd.rx_data_sz = 0;
|
||||
err = SPIBUS_TRANSFER(pdev, dev, &cmd);
|
||||
if (err == 0)
|
||||
err = at45d_wait_ready(dev, &status);
|
||||
if (err != 0 || (status & 0x40) != 0) {
|
||||
device_printf(dev, "comparing page "
|
||||
"%d failed (status=0x%x)\n", addr,
|
||||
status);
|
||||
berr = EIO;
|
||||
goto out;
|
||||
}
|
||||
}
|
||||
page++;
|
||||
buf += len;
|
||||
offset = 0;
|
||||
resid -= len;
|
||||
if (resid > sc->pagesize)
|
||||
len = sc->pagesize;
|
||||
else
|
||||
len = resid;
|
||||
cmd.tx_data = cmd.rx_data = buf;
|
||||
}
|
||||
out:
|
||||
if (berr != 0) {
|
||||
bp->bio_flags |= BIO_ERROR;
|
||||
bp->bio_error = berr;
|
||||
}
|
||||
bp->bio_resid = resid;
|
||||
biodone(bp);
|
||||
}
|
||||
}
|
||||
@ -271,7 +436,7 @@ static device_method_t at45d_methods[] = {
|
||||
DEVMETHOD(device_attach, at45d_attach),
|
||||
DEVMETHOD(device_detach, at45d_detach),
|
||||
|
||||
{ 0, 0 }
|
||||
DEVMETHOD_END
|
||||
};
|
||||
|
||||
static driver_t at45d_driver = {
|
||||
@ -280,4 +445,4 @@ static driver_t at45d_driver = {
|
||||
sizeof(struct at45d_softc),
|
||||
};
|
||||
|
||||
DRIVER_MODULE(at45d, spibus, at45d_driver, at45d_devclass, 0, 0);
|
||||
DRIVER_MODULE(at45d, spibus, at45d_driver, at45d_devclass, NULL, NULL);
|
||||
|
||||
Loading…
Reference in New Issue
Block a user