1
0
mirror of https://git.FreeBSD.org/src.git synced 2024-12-23 11:18:54 +00:00

- Add quirk handling for Sun Fire V1280. The firmware of these machines

provides no ino-bitmap properties so forge them using the default set
  of controller interrupts and let schizo_setup_intr() take care of the
  children, hoping for non-fancy routing.
- Add quirk handling for Sun Fire V890. When booting these machines from
  disk a Schizo comes up with PCI error residing which triggers as soon
  as we register schizo_pci_bus() even when clearing it from all involved
  registers (it's no longer indicated once we're in schizo_pci_bus()
  though). Thus make PCI bus errors non-fatal until we actually touch the
  bus. With this change schizo_pci_bus() typically triggers once during
  attach in this case. Obviously this approach isn't exactly race free
  but it's about the best we can do about this problem as we're not
  guaranteed that the interrupt will actually trigger on V890 either, as
  it certainly doesn't when for example netbooting them.
This commit is contained in:
Marius Strobl 2010-03-17 20:01:01 +00:00
parent 07c5b1686e
commit cb2f0c8ce1
Notes: svn2git 2020-12-20 02:59:44 +00:00
svn path=/head/; revision=205254
2 changed files with 29 additions and 5 deletions

View File

@ -402,9 +402,22 @@ schizo_attach(device_t dev)
*/
i = OF_getprop(node, "ino-bitmap", (void *)prop_array,
sizeof(prop_array));
if (i == -1)
panic("%s: could not get ino-bitmap", __func__);
ino_bitmap = ((uint64_t)prop_array[1] << 32) | prop_array[0];
if (i != -1)
ino_bitmap = ((uint64_t)prop_array[1] << 32) | prop_array[0];
else {
/*
* If the ino-bitmap property is missing, just provide the
* default set of interrupts for this controller and let
* schizo_setup_intr() take care of child interrupts.
*/
if (sc->sc_half == 0)
ino_bitmap = (1ULL << STX_UE_INO) |
(1ULL << STX_CE_INO) |
(1ULL << STX_PCIERR_A_INO) |
(1ULL << STX_BUS_INO);
else
ino_bitmap = 1ULL << STX_PCIERR_B_INO;
}
for (i = 0; i <= STX_MAX_INO; i++) {
if ((ino_bitmap & (1ULL << i)) == 0)
continue;
@ -684,6 +697,14 @@ schizo_attach(device_t dev)
ofw_bus_setup_iinfo(node, &sc->sc_pci_iinfo, sizeof(ofw_pci_intr_t));
/*
* At least when booting Fire V890 from disk a Schizo comes up with
* a PCI bus error residing which triggers as soon as we register
* schizo_pci_bus() even when clearing it from all involved registers
* beforehand (but is quiet once it has fired). Thus we make PCI bus
* errors non-fatal until we actually touch the bus.
*/
sc->sc_flags |= SCHIZO_FLAGS_ARMED;
device_add_child(dev, "pci", -1);
return (bus_generic_attach(dev));
}
@ -787,6 +808,8 @@ schizo_pci_bus(void *arg)
iommu = SCHIZO_PCI_READ_8(sc, STX_PCI_IOMMU);
status = PCIB_READ_CONFIG(sc->sc_dev, sc->sc_pci_secbus,
STX_CS_DEVICE, STX_CS_FUNC, PCIR_STATUS, 2);
if ((sc->sc_flags & SCHIZO_FLAGS_ARMED) == 0)
goto clear_error;
if ((csr & STX_PCI_CTRL_MMU_ERR) != 0) {
if ((iommu & TOM_PCI_IOMMU_ERR) == 0)
goto clear_error;

View File

@ -44,8 +44,9 @@ struct schizo_softc {
#define SCHIZO_MODE_XMS 2
u_int sc_flags;
#define SCHIZO_FLAGS_BSWAR (1 << 0)
#define SCHIZO_FLAGS_CDMA (1 << 1)
#define SCHIZO_FLAGS_ARMED (1 << 0)
#define SCHIZO_FLAGS_BSWAR (1 << 1)
#define SCHIZO_FLAGS_CDMA (1 << 2)
bus_addr_t sc_cdma_clr;
uint32_t sc_cdma_state;