1
0
mirror of https://git.FreeBSD.org/src.git synced 2024-12-23 11:18:54 +00:00

A number of small changes to make the 'save choice to disk' safer,

and re-enable it as default.

In particular:

+ re-enable the 'update' flag in the Makefile (of course!);

+ commit Warner's patch "orb $NOUPDATE,_FLAGS(%bp)"
  to avoid writing to disk in case of a timeout/default choice;

+ fix an off-by-one count in the partition scan code that would
  print the wrong name for unknown partitions;

+ unconditionally change the boot prompt to 'Boot:' instead of 'Default:'
  to make room for the extra code/checks/messages. Some of the changes
  listed below are also made to save space;

+ rearrange and fix comments for known partition types. Right now we
  explicitly recognise *BSD, Linux, FAT16 (type 6, used on many USB keys),
  NTFS (type 7), FAT32 (type 11).
  Depending on other options we also recognise Extended (type 5),
  FAT12 (type 1) and FAT16 < 32MB (type 4).

+ Add an entry "F6 PXE" when the code is built with -DPXE (which is
  a default now). Technically, F6 boots through INT18, so the prompt 'PXE'
  is a bit misleading. Unfortunately the name INT18
  is too long and does not fit in - we could use ROM perhaps.
  The reason I picked 'PXE' is that on many (I believe) new systems
  INT18 calls PXE.

Apart from the choice of the name for PXE/ROM/INT18, this should close
pending issues on the 1-sector boot0 code and we should be able to
move the code to RELENG_7 when it reopens.

No boot0cfg changes are necessary.

MFC after:	3 weeks
This commit is contained in:
Luigi Rizzo 2008-12-30 09:40:50 +00:00
parent a26b1f3d06
commit df52a87993
Notes: svn2git 2020-12-20 02:59:44 +00:00
svn path=/head/; revision=186598
2 changed files with 27 additions and 28 deletions

View File

@ -30,7 +30,7 @@ CFLAGS += ${OPTS}
# with the one in the boot sector.
# Default boot flags:
BOOT_BOOT0_FLAGS?= 0xcf
BOOT_BOOT0_FLAGS?= 0x8f
# The number of timer ticks to wait for a keypress before assuming the default
# selection. Since there are 18.2 ticks per second, the default value of

View File

@ -22,6 +22,7 @@
#endif
#ifdef PXE /* enable PXE/INT18 booting with F6 */
#define SAVE_MORE_MEMORY
#endif
#ifdef CHECK_DRIVE /* make sure we boot from a HD. */
@ -274,10 +275,11 @@ read_entry: movb %ch,-0x4(%bx) # Zero active flag (ch == 0)
* Scan the table of bootable ids, which starts at %di and has
* length TLEN. On a match, %di points to the element following the
* match; the corresponding offset to the description is $(TLEN-1)
* bytes ahead. If we don't find a match, we hit the 'unknown' entry.
* bytes ahead. We use a count of TLEN+1 so if we don't find a match
* within the first TLEN entries, we hit the 'unknown' entry.
*/
movw $bootable_ids,%di # Lookup tables
movb $(TLEN),%cl # Number of entries
movb $(TLEN+1),%cl # Number of entries
repne # Locate
scasb # type
/*
@ -324,7 +326,7 @@ print_drive: addb $'0'|0x80,%al # Save next
callw putx # item
/*
* Menu is complete, display a prompt followed by current selection.
* 'decw %si' makes the register point to the space after 'Default: '
* 'decw %si' makes the register point to the space after 'Boot: '
* so we do not see an extra CRLF on the screen.
*/
print_prompt: movw $prompt,%si # Display
@ -371,6 +373,7 @@ read_key:
* Timed out or default selection
*/
use_default: movb _OPT(%bp),%al # Load default
orb $NOUPDATE,_FLAGS(%bp) # Disable updates
jmp check_selection # Join common code
/*
@ -585,13 +588,12 @@ intx13: # Prepare CHS parameters
* Various menu strings. 'item' goes after 'prompt' to save space.
* Also use shorter versions to make room for the PXE/INT18 code.
*/
prompt:
#ifdef PXE
prompt: .ascii "\nBoot:"
item: .ascii " "; .byte ' '|0x80
#else
prompt: .ascii "\nDefault:"
item: .ascii " "; .byte ' '|0x80
.ascii "\nF6 PXE\r"
#endif
.ascii "\nBoot:"
item: .ascii " "; .byte ' '|0x80
crlf: .ascii "\r"; .byte '\n'|0x80
/* Partition type tables */
@ -602,13 +604,13 @@ bootable_ids:
* Corresponding descriptions are at desc_ofs:
* Entries don't need to be sorted.
*/
.byte 0x1, 0x6, 0x7, 0xb, 0xc
#ifndef SAVE_MEMORY
.byte 0xe
#endif
.byte 0x83, 0xa5, 0xa6, 0xa9, 0x4
.byte 0x83, 0xa5, 0xa6, 0xa9, 0x06, 0x07, 0x0b
#ifndef SAVE_MORE_MEMORY
.byte 0x5, 0xf
.byte 0x05 # extended partition
#endif
#ifndef SAVE_MEMORY /* other DOS partitions */
.byte 0x01 # FAT12
.byte 0x04 # FAT16 < 32M
#endif
desc_ofs:
@ -617,24 +619,21 @@ desc_ofs:
* actual partition name. The last entry must point to os_misc,
* which is used for non-matching names.
*/
.byte os_dos-. # 1, FAT12 DOS
.byte os_dos-. # 6, FAT16 <32M, DOS/WIN
.byte os_win-. # 7, FAT16 >=32M Windows
.byte os_win-. # 11, FAT32
.byte os_win-. # 12, FAT32-LBA
#ifndef SAVE_MEMORY
.byte os_win-. # 14, FAT16-LBA
#endif
.byte os_linux-. # 131, Linux
.byte os_freebsd-. # 165, FreeBSD
.byte os_bsd-. # 166, OpenBSD
.byte os_bsd-. # 169, NetBSD
.byte os_dos-. # 4, FAT16 < 32M
.byte os_dos-. # 6, FAT16 >= 32M
.byte os_win-. # 7, NTFS
.byte os_win-. # 11, FAT32
#ifndef SAVE_MORE_MEMORY
.byte os_ext-. # 5, DOS Ext
.byte os_ext-. # 15, DOS Ext-LBA
#endif
#ifndef SAVE_MEMORY
.byte os_dos-. # 1, FAT12 DOS
.byte os_dos-. # 4, FAT16 <32M
#endif
.byte os_misc-. # Unknown
/*
@ -643,10 +642,10 @@ desc_ofs:
*/
os_misc: .byte '?'|0x80
os_dos:
#ifndef SAVE_MEMORY /* DOS string only if room */
#ifndef SAVE_MORE_MEMORY /* 'DOS' remapped to 'WIN' if no room */
.ascii "DO"; .byte 'S'|0x80
#endif
os_win: .ascii "WI"; .byte 'N'|0x80
os_win: .ascii "Wi"; .byte 'n'|0x80
os_linux: .ascii "Linu"; .byte 'x'|0x80
os_freebsd: .ascii "Free"
os_bsd: .ascii "BS"; .byte 'D'|0x80