This creates a skeleton ISA device driver.
I don't pretend that it's fully correct or even opitimal
but it at least creates (and compiles) a 'clean' ISA driver.
Hopefully PCI/PCCARD/etc. support will be added when I understand it.
Unlike the old version this just creates a module. The old one tried to
create a new kernel with the driver to be tested.
Instead of:
foo = malloc(sizeof(foo), M_WAIT);
bzero(foo, sizeof(foo));
You can now (and please do) use:
foo = malloc(sizeof(foo), M_WAIT | M_ZERO);
In the future this will enable us to do idle-time pre-zeroing of
malloc-space.
Approved by: rwatson
Obtained from: NetBSD source tree
Second part of the fsck wrappers commit. This commit enables the new fsck
code (removing the fsck/* code and replacing it with the netbsd fsck
wrapper code), and enabling some FFS-based utilities to compile.
Details:
* quotacheck, fsdb required modification to use the fsck_ffs/ code rather
than fsck/ . This might change later since quotacheck requires preen.c
which should exist in fsck/ rather than fsck_ffs/
* src/Makefile has fsck_ffs added to it so it it built as part of the tree
now
* share/doc/smm/03.fsck/ uses the SMM.doc/ stuff from fsck_ffs, not fsck.
I've tested this, and it shouldn't require any changes on your machine.
The fsck wrapper reads /etc/fsck and is command-line-compatible enough
to not require rc changes (well, most changes unless you want to do
anything nifty by specifying the fs types explicityly, read the man page
if you want further details on what it can do.)
This now allows us to support multiple filesystem types during bootup.
Replace all in-tree uses with <sys/mouse.h> which repo-copied a few
moments ago from src/sys/i386/include/mouse.h by peter.
This is also the appropriate fix for exo-tree sources.
Put warnings in <machine/mouse.h> to discourage use.
November 15th 2000 the warnings will be converted to errors.
January 15th 2001 the <machine/mouse.h> files will be removed.
Replace all in-tree uses with necessary subset of <sys/{fb,kb,cons}io.h>.
This is also the appropriate fix for exo-tree sources.
Put warnings in <machine/console.h> to discourage use.
November 15th 2000 the warnings will be converted to errors.
January 15th 2001 the <machine/console.h> files will be removed.
the appropriate documentation added to rc.conf(5). If all goes well
with this over the next few weeks, the PR will be closed with the
pullup of patches back to 4-STABLE.
PR: 20202
Submitted by: Gerhard Sittig <Gerhard.Sittig@gmx.net>
Reviewed by: Darren Reed <darrenr@freebsd.org>
Approved by: Darren Reed <darrenr@freebsd.org>
Obtained from: Gerhard Sittig <Gerhard.Sittig@gmx.net>
of the Am79c973 with "AlertIT Technology," whatever that is. Also mention
support for the PCnet/FAST III cards in the documentation. The
PCnet/FAST III chips have integrated 10/100 PHYs.
this just involves adding the chip ID to the supported list: the PCnet/PRO
is compatible with the PCnet/FAST+ and friends and should "just work"
with this driver.
Also try to handle mbuf allocation failures in the receive handler
more gracefully.
${LIB} library". "standard" tends to imply the one that is normally
used... but by default it is not the case - the .so would be the
"standard" library. Therefore, change this to 'static'. Another option
might be "conventional ${LIB} library".
Remove the entire copy of ip_fw.h and just point readers at it as it
gets out of date..
Add mentions of dummynet and the fwd actions.
Still to do: Whoever did the 'stateful' stuff might mention it..
sync with the implementation. Vnode locks *are* required for these
operations, as some underlying implementations will require them.
Obtained from: TrustedBSD Project
Previously, these cards were supported by the lnc driver (and they
still are, but the pcn driver will claim them first), which is fine
except the lnc driver runs them in 16-bit LANCE compatibility mode.
The pcn driver runs these chips in 32-bit mode and uses the RX alignment
feature to achieve zero-copy receive. (Which puts it in the same
class as the xl, fxp and tl chipsets.) This driver is also MI, so it
will work on the x86 and alpha platforms. (The lnc driver is still
needed to support non-PCI cards. At some point, I'll need to newbusify
it so that it too will me MI.)
The Am79c978 HomePNA adapter is also supported.
All periodic sub-scripts <larf> now have their return codes interpreted
by periodic(8). Output may be masked based on variable values in
periodic.conf.
It's also now possible to email periodic output to arbitrary addresses,
or to send it to a log file, examples of which can be found in
newsyslog.conf.
The upshot of it all should be no discernable changes to the default
behaviour of periodic(8).
PR: 21250
include:
* Mutual exclusion is used instead of spl*(). See mutex(9). (Note: The
alpha port is still in transition and currently uses both.)
* Per-CPU idle processes.
* Interrupts are run in their own separate kernel threads and can be
preempted (i386 only).
Partially contributed by: BSDi (BSD/OS)
Submissions by (at least): cp, dfr, dillon, grog, jake, jhb, sheldonh
-- Unknown
Now that the RSA algorithm is released into the public domain, build
librsaintl by default unless NO_RSAINTL is set in make.conf.
The native OpenSSL implementation of RSA is much faster, doesn't have
an artificial keysize limitation, has 30% fewer calories and tastes great!
configure FreeBSD so that various databases such as passwd and group can be
looked up using flat files, NIS, or Hesiod.
= Hesiod has been added to libc (see hesiod(3)).
= A library routine for parsing nsswitch.conf and invoking callback
functions as specified has been added to libc (see nsdispatch(3)).
= The following C library functions have been modified to use nsdispatch:
. getgrent, getgrnam, getgrgid
. getpwent, getpwnam, getpwuid
. getusershell
. getaddrinfo
. gethostbyname, gethostbyname2, gethostbyaddr
. getnetbyname, getnetbyaddr
. getipnodebyname, getipnodebyaddr, getnodebyname, getnodebyaddr
= host.conf has been removed from src/etc. rc.network has been modified
to warn that host.conf is no longer used at boot time. In addition, if
there is a host.conf but no nsswitch.conf, the latter is created at boot
time from the former.
Obtained from: NetBSD
stay broken for months without anyone noticing.
The boot-conf command was changed as to reproduce the behavior of builtin
loader words precisely. As a result, it now always need an argument, possibly
0 indicating that no other arguments are being passed. This broke in a
non-deterministic way (ie, it could go on working as if everything was fine).
* Clear extraneous argument to the Os macro.
* Place the name description on the Nd line.
* Mark sub-sections up with Ss, not Sh.
* Don't double-quote "Login" when "login prompt" is perfectly
good English.
by -n is nonexistant, then the following -d was misinterpreted with
a strange error. By putting double quotes (") around the argument,
we can be sure there is _something_ there that we can check a zero
length against.
cause the working directory to be used. Make it so.
When we're more convinced that it'll work, we might try this
to avoid a shell invocation:
.if defined(MAKEOBJDIRPREFIX) && !empty(MAKEOBJDIRPREFIX) &&
exists(${CANONICALOBJDIR}/)
Reported by: bde
Bump the MRU by 4 bytes to make room for the MP header
Down the autoload threshold to a practical value
Don't specify the ISDN bandwidth as 65536 (ahem!)
Don't specifiy a carrier period (the default of 6 seconds is fine)
SUPFLAGS when a 'make update' is run. This means that the supfile
doesn't need to be edited because the -h will override the
CHANGE_THIS.FreeBSD.org host.
Beyond changes to the build system, this includes fixing up the sample
freebsd.mc configuration for changes in defaults and syntax, removing
outdated documentation, and updating the release notes.
mostly unrelated to the attributed PR, and the attributed submitter
wasn't so much suggesting the patch for inclusion as providing it
for clarity.
PR: 9869
Submitted by: bde
related patches. These include:
* Mode page editting can be scripted. This involves two
things: first, if stdin is not a tty, changes are read from
stdin rather than invoking $EDITOR. Second, and more
importantly, not all modepage entries must be included in the
change set. This means that camcontrol can now gracefully handle
more intrusive editting from the $EDITOR, including removal or
rearrangement of lines. It also means that you can do stuff
like:
# echo "WCE: 1" | camcontrol modepage da3 -m 8 -e
# newfs /dev/da3
# echo "WCE: 0" | camcontrol modepage da3 -m 8 -e
* Range-checking on user-supplied input values. modeedit.c now
uses the field width specifiers to determine the maximum
allowable value for a field. If the user enters a value larger
than the maximum, it clips the value to the max and warns the
user. This also involved patching cam_cmdparse.c to be more
consistent with regards to the "count" parameter to arg_put
(previously is was the length of strings and 1 for all integral
types). The cam_cdbparse(3) man page was also updated to reflect
the revised semantics.
* In the process, I removed the 64 entry limit on mode pages (not
that we were even close to hitting that limit). This was a nice
side-effect of the other changes.
* Technically, the new mode editting functionality allows editting
of character array entries in mode pages (type 'c' or 'z'),
however since buff_encode doesn't grok them it is currently
useless.
* Camcontrol gained two new options related to mode pages: -l and
-b. The former lists all available mode pages for a given
device. The latter forces mode page display in binary format
(the default when no mode page definition was found in
scsi_modes).
* Added support for mode page names to scsi_modes. Allows names to
be displayed alongside mode numbers in the mode page
listing. Updated scsi_modes to use the new functionality. This
also adds the semicolon into the scsi_modes syntax as an
optional mode page definition terminator. This is needed to name
pages without providing a page format definition.
* Updated scsi_all.h to include a structure describing mode page
headers.
* Added $FreeBSD$ line to scsi_modes.
Inspired by: dwhite
Reviewed by: ken
explanations into a new file "refuse.README". Some users are simply
copying these files and expecting them to work -- without even
reading them. I don't want to spend any more time closing bogus
PRs from that.
Also correct an error or two in the patterns.
Simplify "rs" (\Ec will be fixed later in syscons, so this is intermedia step)
Remove "mh" - termcap must describe what device _actually_ have end left
emulation upon upper level program. "mh" is also conflicting with colors.
Don't remove "md" for mono consoles
dosansi:
Wrong "mh" -> good "mr"
cards. This basically involves switching to the 12.4.13 firmware, plus
a couple of minor tweaks to the driver.
Also changed the jumbo buffer allocation scheme just a little to avoid
'failed to allocate jumbo buffer' conditions in certain cases.
The tap driver is used to present a virtual Ethernet interface to the
system. Packets presented by the network stack to the interface are
made available to a character device in /dev. With tap and the bridge
code, you can make remote bridge configurations where both sides of
the bridge are separated by userland daemons.
This driver also has a special naming hack to allow it to serve a similar
purpose to the vmware port.
Submitted by: myevmenkin@att.com, vsilyaev@mindspring.com
whitespace changes, which should not be a problem because this
is only the second revision of the file and translators are
unlikely to have gotten started yet.
Reviewed by: abial
whitespace changes, which should not be a problem because this
is only the second revision of the file and translators are
unlikely to have gotten started yet.
Reviewed by: abial
up cam_fill_ctio usage to passed atio flags. Clear periph_priv area
of new ctio so if the kernel is dumb enough to look at them (this is
a SECURITY hole) the panic will be obvious instead of subtle.
3.3volt PCI/cardbus chipsets similar to the 98715 (and they have
512-bit hash tables). Also update the man page to mention the 98727/98732
and the SOHOware SFA110A Rev B4 card with the 98715AEC-C chip.
PR: 19894
Submitted by: Tony Finch <dot@dotat.at>
2. "brackets" -> "angle brackets" when referring to < and >.
3. Clean up the bit about creating the usage() message. After clarifying a
couple of points the sentence became rather long, and rather poor English, so
it was converted to a enumerated list instead.
parts 1, 2, 3:
Reviewed by: sheldonh
and remove sysctl oids at will during runtime - they don't rely on
linker sets. Also, the node oids can be referenced by more than
one kernel user, which means that it's possible to create partially
overlapping trees.
Add sysctl contexts to help programmers manage multiple dynamic
oids in convenient way.
Please see the manpages for detailed discussion, and example module
for typical use.
This work is based on ideas and code snippets coming from many
people, among them: Arun Sharma, Jonathan Lemon, Doug Rabson,
Brian Feldman, Kelly Yancey, Poul-Henning Kamp and others. I'd like
to specially thank Brian Feldman for detailed review and style
fixes.
PR: kern/16928
Reviewed by: dfr, green, phk
