that causes a machine to panic when the kernel PPP / DEFLATE code is used.
1.11 moved a ZFREE to a point after the structural members were clobbered
by stores into a union'd structure.
This commit fixes the bug and adds a big whopping comment to make sure
the code isn't 'cleaned up' again :-)
Ian Dowse came up with the same patch independantly 68 seconds before I
did, talk about Karma!
I would also like to thank Eugene Grosbein for marathon work in tracking the
problem down by udpating his -stable based on date over and over again
to close in on the commit that caused his crashes.
PR: kern/35969
Reviewed by: Ian Dowse <iedowse@maths.tcd.ie>
X-MFC after: immediately
# sysctl net.link.ether.bdg_ipf=1
To enable. Just like ipfw(8) bridging, only input packets are filtered
in the bridge. Filtering works just like in the IP layer, ipf(8)
first, then ipfw(8). And just like in the IP layer, both are
independent, one need not be run to use the other. (Note: This will
not work in, but doesn't break, the bridge.ko module. The ipl.ko
module would need to be fixed before that is worth worrying about.)
Reviewed by: luigi
unit allocation with a bitmap in the generic layer. This
allows us to get rid of the duplicated rman code in every
clonable interface.
Reviewed by: brooks
Approved by: phk
pseudo-devices when an interface goes away. Otherwise, an open /dev/net/foo0
when the interface is removed can cause a crash.
Not objected to by: jlemon
active-filter in pppd(8).
PR: kern/12281
Submitted by: Tim Moore <moore@bricoworks.com>
Not objected by: peter
Reviewed by: ru
Approved by: ru
MFC after: 1 week
header and push it up any attached bpf devices on the parent interface.
This makes hardware vlan decoding more like the normal software path.
Tested by: cjtt@employees.org
MFC after: 2 weeks
via sysctl's. The old #defines, MAX_GIF_NEST and XBONEHACK are
currently supported for backwards compatability, but will probably be
removed at some point in the future.
New locks are:
- pgrpsess_lock which locks the whole pgrps and sessions,
- pg_mtx which protects the pgrp members, and
- s_mtx which protects the session members.
Please refer to sys/proc.h for the coverage of these locks.
Changes on the pgrp/session interface:
- pgfind() needs the pgrpsess_lock held.
- The caller of enterpgrp() is responsible to allocate a new pgrp and
session.
- Call enterthispgrp() in order to enter an existing pgrp.
- pgsignal() requires a pgrp lock held.
Reviewed by: jhb, alfred
Tested on: cvsup.jp.FreeBSD.org
(which is a quad-CPU machine running -current)
to notify other nodes about the address change. Otherwise, they
might try and keep using the old address until their arp table
entry times out and the address is refreshed.
Maybe this ought to be done for INET6 addresses as well but i have
no idea how to do it. It should be pretty straightforward though.
MFC-after: 10 days
deprecated in favor of the POSIX-defined lowercase variants.
o Change all occurrences of NTOHL() and associated marcros in the
source tree to use the lowercase function variants.
o Add missing license bits to sparc64's <machine/endian.h>.
Approved by: jake
o Clean up <machine/endian.h> files.
o Remove unused __uint16_swap_uint32() from i386's <machine/endian.h>.
o Remove prototypes for non-existent bswapXX() functions.
o Include <machine/endian.h> in <arpa/inet.h> to define the
POSIX-required ntohl() family of functions.
o Do similar things to expose the ntohl() family in libstand, <netinet/in.h>,
and <sys/param.h>.
o Prepend underscores to the ntohl() family to help deal with
complexities associated with having MD (asm and inline) versions, and
having to prevent exposure of these functions in other headers that
happen to make use of endian-specific defines.
o Create weak aliases to the canonical function name to help deal with
third-party software forgetting to include an appropriate header.
o Remove some now unneeded pollution from <sys/types.h>.
o Add missing <arpa/inet.h> includes in userland.
Tested on: alpha, i386
Reviewed by: bde, jake, tmm
In order of importance:
+ each cluster now uses private data structures (filtering and
local address tables) so you can treat them as fully independent
switches. This part of the work was supported by:
Cisco Systems, Inc. - NSITE lab, RTP, NC.
+ cleaned up the handling of configuration, so the system will behave
much better when real or pseudo devices are dynamically attached
or detached. It should also not panic anymore on systems with large
number of devices, closing a few existings PRs on the topic.
+ while at it, add support for VLAN. This means that a FreeBSD box
can now work as a real VLAN switch, with trunk interfaces etc.
As an example:
ifconfig vlan0 vlan 3 vlandev dc0
ifconfig vlan1 vlan 4 vlandev dc0
net.link.ether.bridge_cfg="vlan0:3,dc1:3,vlan1:4,dc1:4"
uses dc0 as a trunk interface, and dc1 and dc3 as ports on vlans 3 and 4
You get the idea...
NOTA BENE: by default bridge_cfg is initialised to "" so even if
you enable bridging, no packets will be bridged until you set the
list of interfaces on which you want this to happen.
+ large restructuring of the code, moving private vars and types from
bridge.h to bridge.c.
+ added a lot of comments to the code to explain how to use it.
64-bit platforms. The unaligned access is caused by struct ifa_msghdr
not being a multiple of 8-bytes in size. If an interface has an odd
number of addresses, this causes the next interface to generate an
unaligned access in the user-level app walking the interfaces (ifconfig).
Submitted by: Bernd Walter <ticso@cicely8.cicely.de>
socket so that routing daemons and other interested parties
know when an interface is attached/detached.
PR: kern/33747
Obtained from: NetBSD
MFC after: 2 weeks
are checked on the way in even if they were not calculated on the
way out.
This fixes rwhod
PR: 31954
Submitted by: fenner
Approved by: fenner
MFC after: 1 week
IPv6 on an sppp interface. In an IPv6-enabled kernel, every IPv6
interface automatically gets an IPv6 address assigned (and IPv6
multicast packets sent at initialization time). For sppp links where
we know our remote peer wouldn't support IPv6 at all, there's no point
in attempting to negotiate IPV6CP (or to even dial out for an IPv6
packet at all for dial-on-demand interfaces).
I wish there were a more generic way to administratively disable IPv6
on an interface instead. ume told me there isn't.
While i was at it, converted both, enable_vj and enable_ipv6 into flag
bits in struct sppp (enable_vj used to be an int of its own).
MFC after: 1 month
it again when going from INITIAL to STARTING. This has been done for
passive or auto-conecting interfaces always, but not for permanent
ones.
Obtained from: NetBSD (rev 1.32)
& and && has been botched. This was likely the cause for some havoc
with various negotiation cases of sppp in the past.
Obtained from: NetBSD (rev 1.13)
MFC after: 1 week
makes the implied assumption there were another 128 bytes of space in
front of the packet handed off to it... which is not the case for
sppp. This could easily end up in corrupting random memory.
This fix is about the same as revs 1.6, 1.8, and 1.9 from our
i4b_ispppsubr.c.
Also fixed IPCP option negotiation to zero out the options when
starting IPCP. Otherwise, if negotiation parameters change between
various IPCP startups, it could happen that old options would still be
requested (this happened if VJ was turned off, and ended up in half
off the link still negotiating for VJ compression).
IMHO, the base system's sppp is now feature-wise up to date with the
one in the i4b part of the tree, so the latter can be disabled.
MFC after: 1 month
inclusion of VJ compression into sppp.
Now, instead of the need to include this and that and everything plus
the kitchensink in each of those drivers, struct sppp uses struct
slcompress as an opaque structure only referenced by a pointer. The
actual structure is then malloced at initialization time.
While i was at it, also fixed a bug where received VJ packets would only
be recognized if INET6 was defined.
time from the PPP packets sent. This effectively merges rev 1.2 of
the old i4b_ispppsubr.c, with the exception that i eventually ended up
in debugging and fixing it so the idle time is now really
detected. ;-) (The version in i4b simply doesn't work right since it
still accounts for incoming LCP echo packets which it is supposed to
ignore for idle time considerations...)
Obtained from: i4b
MFC after: 1 month
sppp_parms that are needed for the SPPPIO[GS]DEFS ioctl commands.
This allows it to keep struct sppp inside #ifdef _KERNEL (where it
belongs), and prevents userland programs that wish to include
<net/if_sppp.h> from including the earth, the hell, and the universe
before the are able to resolve all the kernel-internal stuff that's in
struct sppp.
Discussed with: hm
MFC after: 1 month
This (effectively) merges rev 1.36 of i4b's old if_spppsubr.c, albeit
in a slightly different manner (we export the timer in millisecond
values as exposed to tick values from/to userland).
Obtained from: i4b
MFC after: 1 month
This is the logical merge of rev 1.32 of i4b's old if_spppsubr.c (which
was based on PR misc/11767), plus (i4b) rev 1.6 of i4b's if_ispppsubr.c,
albeit with numerous stylistic and cosmetic changes.
PR: misc/11767
Submitted by: i4b, Joachim Kuebart
MFC after: 1 month
Character-Map. RFC 1662 demands it for the sake of async to sync
PPP protocol converters (like Win9* :).
This merges rev 1.26/1.27 of the old i4b sppp changes.
route to the destination twice. Now that brian has fixed route.c to no
longer accept this second route, this long-standing nuisance became a
showstopper bug for sppp users.
In retrospect, this is the same fix as the one in rev 1.78 of if_sl.c;
most likely the original version of sppp has been cloned from SLIP. ;-)
if we've been given an RTA_IFP or changed RTA_IFA sockaddr.
This fixes the following bug:
>/dev/tun100
>/dev/tun101
ifconfig tun100 1.2.3.4 5.6.7.8
ifconfig tun101 1.2.3.4 6.7.8.9
route change 6.7.8.9 -ifa 1.2.3.4 -iface -mtu 500
which erroneously changed tun101's host route to have an ifp of tun100
(rt_getifa() sets the ifp after calling ifa_ifwithnet(1.2.3.4))
This incarnation submitted by: ru
select/poll, and therefore with pthreads. I doubt there is any way
to make this 100% semantically identical to the way it behaves in
unthreaded programs with blocking reads, but the solution here
should do the right thing for all reasonable usage patterns.
The basic idea is to schedule a callout for the read timeout when a
select/poll is done. When the callout fires, it ends the select if
it is still in progress, or marks the state as "timed out" if the
select has already ended for some other reason. Additional logic in
bpfread then does the right thing in the case where the timeout has
fired.
Note, I co-opted the bd_state member of the bpf_d structure. It has
been present in the structure since the initial import of 4.4-lite,
but as far as I can tell it has never been used.
PR: kern/22063 and bin/31649
MFC after: 3 days
Non-SMP, i386-only, no polling in the idle loop at the moment.
To use this code you must compile a kernel with
options DEVICE_POLLING
and at runtime enable polling with
sysctl kern.polling.enable=1
The percentage of CPU reserved to userland can be set with
sysctl kern.polling.user_frac=NN (default is 50)
while the remainder is used by polling device drivers and netisr's.
These are the only two variables that you should need to touch. There
are a few more parameters in kern.polling but the default values
are adequate for all purposes. See the code in kern_poll.c for
more details on them.
Polling in the idle loop will be implemented shortly by introducing
a kernel thread which does the job. Until then, the amount of CPU
dedicated to polling will never exceed (100-user_frac).
The equivalent (actually, better) code for -stable is at
http://info.iet.unipi.it/~luigi/polling/
and also supports polling in the idle loop.
NOTE to Alpha developers:
There is really nothing in this code that is i386-specific.
If you move the 2 lines supporting the new option from
sys/conf/{files,options}.i386 to sys/conf/{files,options} I am
pretty sure that this should work on the Alpha as well, just that
I do not have a suitable test box to try it. If someone feels like
trying it, I would appreciate it.
NOTE to other developers:
sure some things could be done better, and as always I am open to
constructive criticism, which a few of you have already given and
I greatly appreciated.
However, before proposing radical architectural changes, please
take some time to possibly try out this code, or at the very least
read the comments in kern_poll.c, especially re. the reason why I
am using a soft netisr and cannot (I believe) replace it with a
simple timeout.
Quick description of files touched by this commit:
sys/conf/files.i386
new file kern/kern_poll.c
sys/conf/options.i386
new option
sys/i386/i386/trap.c
poll in trap (disabled by default)
sys/kern/kern_clock.c
initialization and hardclock hooks.
sys/kern/kern_intr.c
minor swi_net changes
sys/kern/kern_poll.c
the bulk of the code.
sys/net/if.h
new flag
sys/net/if_var.h
declaration for functions used in device drivers.
sys/net/netisr.h
NETISR_POLL
sys/dev/fxp/if_fxp.c
sys/dev/fxp/if_fxpvar.h
sys/pci/if_dc.c
sys/pci/if_dcreg.h
sys/pci/if_sis.c
sys/pci/if_sisreg.h
device driver modifications
vnodes. This will hopefully serve as a base from which we can
expand the MP code. We currently do not attempt to obtain any
mutex or SX locks, but the door is open to add them when we nail
down exactly how that part of it is going to work.
"[...] and removes the hostcache code from standard kernels---the
code that depends on it is not going to happen any time soon,
I'm afraid."
Time to clean up.
Have sys/net/route.c:rtrequest1(), which takes ``rt_addrinfo *''
as the argument. Pass rt_addrinfo all the way down to rtrequest1
and ifa->ifa_rtrequest. 3rd argument of ifa->ifa_rtrequest is now
``rt_addrinfo *'' instead of ``sockaddr *'' (almost noone is
using it anyways).
Benefit: the following command now works. Previously we needed
two route(8) invocations, "add" then "change".
# route add -inet6 default ::1 -ifp gif0
Remove unsafe typecast in rtrequest(), from ``rtentry *'' to
``sockaddr *''. It was introduced by 4.3BSD-Reno and never
corrected.
Obtained from: BSD/OS, NetBSD
MFC after: 1 month
PR: kern/28360
- Report destination address of a P2P link when servicing
routing socket messages.
- Report interface name, address, and destination address
of a P2P link when servicing NET_RT_{DUMP,FLAGS} sysctls.
Part of CSRG revision 8.6 coresponds to revision 1.12.
CSRG revision 8.7 corresponds to revision 1.15.
existing devices (e.g.: tunX). This may need a little more thought.
Create a /dev/netX alias for devices. net0 is reserved.
Allow wiring of net aliases in /boot/device.hints of the form:
hint.net.1.dev="lo0"
hint.net.12.ether="00:a0:c9:c9:9d:63"
This fixes the panic when receiving a packet with an unknown tag, and
also allows reception of packets with known tags.
- Allow overlapping tag number spaces when using multiple hardware-assisted
VLAN parent devices (by comparing the parent interface in
vlan_input_tag() just as in vlan_input() ).
- fix typo in comment
MFC after: 1 week
appear in /dev. Interface hardware ioctls (not protocol or routing) can
be performed on the descriptor. The SIOCGIFCONF ioctl may be performed
on the special /dev/network node.
+ implement "limit" rules, which permit to limit the number of sessions
between certain host pairs (according to masks). These are a special
type of stateful rules, which might be of interest in some cases.
See the ipfw manpage for details.
+ merge the list pointers and ipfw rule descriptors in the kernel, so
the code is smaller, faster and more readable. This patch basically
consists in replacing "foo->rule->bar" with "rule->bar" all over
the place.
I have been willing to do this for ages!
MFC after: 1 week
Yes this really is rather silly and the implementation is overkill given
that you are only allowed one of them, but NetBSD implements cloning on
this device and it's a less cluttered example of cloning then most.
Note ALL MODULES MUST BE RECOMPILED
make the kernel aware that there are smaller units of scheduling than the
process. (but only allow one thread per process at this time).
This is functionally equivalent to teh previousl -current except
that there is a thread associated with each process.
Sorry john! (your next MFC will be a doosie!)
Reviewed by: peter@freebsd.org, dillon@freebsd.org
X-MFC after: ha ha ha ha
Allow non-superuser to open, listen to, and send safe commands on the
routing socket. Superuser priviledge is required for all commands
but RTM_GET.
Lose `setuid root' bit of route(8).
Reviewed by: wollman, dd
into sadb_x_sa2_sequence from sadb_x_sa2_reserved3 in the sadb_x_sa2
structure. Also the output of setkey is changed. sequence number
of the sadb is replaced to the end of the output.
Obtained from: KAME
particularly nice that IPSEC inserts a zero-length mbuf into the
chain, and that bug should be fixed too, but interfaces should be
robust to bad input.
Print the interface name when TUNDEBUG()ing about dropping an mbuf.
This is to be friendly with non-IPv6 peer (If the peer complains due to
lack of IPv6CP, drop IPv6CP). This basically implements "RXJ+" state
transition in the RFC.
Obtained from: NetBSD
effect, which would cause unnecessary route deletion:
* Unfortunately, this has the obnoxious
* property of also triggering for insertion /above/ a pre-existing network
* route and clones. Sigh. This may be fixed some day.
The effect has been even worse, because recent versions of route.c set
the parent rtentry for cloned routes from an interface-direct route.
For example, suppose that we have an interface "ne0" that has an IPv4
subnet "10.0.0.0/24". Then we may have a cloned route like 10.0.0.1
on the interface, whose parent route is 10.0.0.0/24 (to the interface
ne0). Now, when we add the default route (i.e. 0.0.0.0/0),
rt_fixchange() will remove the cloned route 10.0.0.1. The (bad) effect
also prevents rt_setgate from configuring rt_gwroute, which would not
be an intended behavior.
As suggested in the comments to rt_fixchange(), we need stricter check
in the function, to prevent unintentional route deletion.
This fix also solve the "IPV6 panic?" problem in nd6_timer().
Submitted by: JINMEI Tatuya <jinmei@isl.rdc.toshiba.co.jp>
MFC after: 4 days
vlan_unconfig()-ing an interface on which multicast groups have been
joined. Instead, keep the list of groups around (and, in fact, allow
changing of the membership list) and re-join them when the vlan interface
is reassociated with a lower level interface.
of tunclose() rather than the end, and tunopen() grabbed that unit
before tunclose() finished (one process is allocating it while another
is freeing it!).
It may be worth hanging some sort of rw mutex around all specinfo
calls where d_close and the detach handler get a write lock and all
other functions get a read lock. This would guarantee certain levels
of ``atomicity'' (is that a word?) that people may expect (I believe
Solaris does something like this).
requirements(RFC1573, interface MIB). This change for 4.4BSD was
first introduced in if_ethersubr.c:1.17->1.18.
BTW, iflastchange on all of IFs are inconsistent. e.g.
ether, tun: update
fddi, tokenring, ppp: not update
I'll make patch later.
Obtained from: KAME
MFC after: 2 weeks
This work was based on kame-20010528-freebsd43-snap.tgz and some
critical problem after the snap was out were fixed.
There are many many changes since last KAME merge.
TODO:
- The definitions of SADB_* in sys/net/pfkeyv2.h are still different
from RFC2407/IANA assignment because of binary compatibility
issue. It should be fixed under 5-CURRENT.
- ip6po_m member of struct ip6_pktopts is no longer used. But, it
is still there because of binary compatibility issue. It should
be removed under 5-CURRENT.
Reviewed by: itojun
Obtained from: KAME
MFC after: 3 weeks
around, use a common function for looking up and extracting the tunables
from the kernel environment. This saves duplicating the same function
over and over again. This way typically has an overhead of 8 bytes + the
path string, versus about 26 bytes + the path string.
route in ifa_ifwithroute(), as the last resort, look up the route to
the gateway, not destination (to derive the interface from).
PR: kern/27852
Submitted by: Iasen Kostoff <tbyte@tbyte.org>
MFC after: 2 weeks
if_up() must be called at splnet or higher.
Second, set the IFF_RUNNING flag on an interface after its
resources (i.e. tunnel source and destination addresses)
have been set. Note that we don't set IFF_UP because it is
if_up()'s job to do that.
PR: kern/27851
Submitted by: Horacio J. PeÓa <horape@compendium.com.ar>
Only tun0 -> tun32767 may now be opened as struct ifnet's if_unit
is a short.
It's now possible to open /dev/tun and get a handle back for an available
tun device (use devname to find out what you got).
The implementation uses rman by popular demand (and against my judgement)
to track opened devices and uses the new dev_depends() to ensure that
all make_dev()d devices go away before the module is unloaded.
Reviewed by: phk
despite the fact that most people want to set exactly the same settings
regardless of which card they have. It has been repeatidly suggested
that this configuration should be done via ifconfig. This patch
implements the required functionality in ifconfig and add support to the
wi and an drivers. It also provides partial, untested support for the
awi driver.
PR: 25577
Submitted by: Brooks Davis <brooks@one-eyed-alien.net>
- Allocate zeroed memory in ether_resolvemulti() to prevent equal() from
comparing garbage and determining that two otherwise-equal sockaddr_dls
are different.
- Fill in all required fields of the sockaddr_dl
- Actually copy the multicast address into the sockaddr_dl when calling
if_addmulti()
- Don't claim that we don't have a way to resolve layer 3 addresses into
layer 2 addresses; use the ethernet way.
other "system" header files.
Also help the deprecation of lockmgr.h by making it a sub-include of
sys/lock.h and removing sys/lockmgr.h form kernel .c files.
Sort sys/*.h includes where possible in affected files.
OK'ed by: bde (with reservations)
peer out from sppp_lcp_open() to sppp_lcp_up(). For one, this makes
things look more symmetrical to sppp_lcp_close(), and somehow it also
just occurred to me that an Up event following the open caused the
value of the authentication option to be clobbered.
* Set the CSRG SCCS ID to the revision this file is actually based on
(the file itself has been updated to Lite2 in rev. 1.4).
* Fix some typos in comments.
* Add a comment to the trailing #endif according to style(9)
failures in MOD_LOAD.
Dodge duplicate make_dev() calls by (ab)using dev->si_drv2 to
remember if we created the device node via a dev_clone callback
before the d_open call.
Without this, ifpromisc() always fails (after setting the IFF_PROMISC
bit in ifp->if_flags) and bpf never bothers to turn promiscuous mode off.
PR: 20188
* Initialize the "struct sockaddr_dl sdl" correctly in vlan_setmulti().
PR: kern/22181
* The driver used to call malloc(..., M_NOWAIT), but to not check the
return value. Change malloc(..., M_NOWAIT) to malloc(..., M_WAITOK)
because the corresponding part of code is called from the upper
half of the kernel only.
PR: kern/22181
* Make sure a parent interface is up and running before invoking
its if_start() routine in order to avoid system panic.
PR: kern/22179 kern/24741 i386/25478
* Do not copy all the flags from a parent mindlessly.
PR: kern/22179
* Do not call if_down() on a parent interface if it's already down.
Call if_down() at splimp because if_down() needs that.
PR: kern/22179
Reviewed by: wollman
Fix a serious bug in sppp where anyone could obtain a successful PAP
authentication by supplying a null password. I've only stumpled across
the PR while browsing for all sppp-related PRs.
Should we also file a security advisory for this?
PR: 21592
Submitted by: <dli@3bc.de> Dirk Liebke
When we get an Open event in stopped state, experience shows that this
is usually means we've somehow missed a previous Down event. This has
occasionally bitten people for the IPCP layer with ISDN, apparently a
previously aborted IPCP negotiation must have caused this. As a
bandaid, we quickly pretent a Down event by advancing to starting
state; this effectively implements the `restart' option mentioned in
RFC 1663.
While i'm not yet fully convinced this is the best thing to do (and is
fully compliant with RFC 1661), i've seen a number of reports here on
the German mailing lists where people have been bitten by the previous
behaviour which usually causes quickly looping ISDN reconnects (thus
loss of money...), and where just this patch fixes the problem.
For this, i'd even like to see it MFC'd if possible.
Submitted by: Helmut Kreft <kreft@zeus.ai-lab.fh-furtwangen.de>
- Use explicit sizes for header structure fields.
- Use __attribute__ ((__packed__)) for header structures.
- Define struct iso88025_rif; for future use.
- Prototype upcoming iso88025_ifdetach()
- Get rid of __P() constructs in prototypes.
A route generated from an RTF_CLONING route had the RTF_WASCLONED flag
set but did not have a reference to the parent route, as documented in
the rtentry(9) manpage. This prevented such routes from being deleted
when their parent route is deleted.
Now, for example, if you delete an IP address from a network interface,
all ARP entries that were cloned from this interface route are flushed.
This also has an impact on netstat(1) output. Previously, dynamically
created ARP cache entries (RTF_STATIC flag is unset) were displayed as
part of the routing table display (-r). Now, they are only printed if
the -a option is given.
netinet/in.c, netinet/in_rmx.c:
When address is removed from an interface, also delete all routes that
point to this interface and address. Previously, for example, if you
changed the address on an interface, outgoing IP datagrams might still
use the old address. The only solution was to delete and re-add some
routes. (The problem is easily observed with the route(8) command.)
Note, that if the socket was already bound to the local address before
this address is removed, new datagrams generated from this socket will
still be sent from the old address.
PR: kern/20785, kern/21914
Reviewed by: wollman (the idea)
Since we know there's always an upper bound we force that bound,
otherwise users can cause a panic via malloc getting hit with a
odd (huge or negative) amount of memory to allocate.
Tested by: kris
Pointed out by: Andrey Valyaev <dron@infosec.ru>
credential structure, ucred (cr->cr_prison).
o Allow jail inheritence to be a function of credential inheritence.
o Abstract prison structure reference counting behind pr_hold() and
pr_free(), invoked by the similarly named credential reference
management functions, removing this code from per-ABI fork/exit code.
o Modify various jail() functions to use struct ucred arguments instead
of struct proc arguments.
o Introduce jailed() function to determine if a credential is jailed,
rather than directly checking pointers all over the place.
o Convert PRISON_CHECK() macro to prison_check() function.
o Move jail() function prototypes to jail.h.
o Emulate the P_JAILED flag in fill_kinfo_proc() and no longer set the
flag in the process flags field itself.
o Eliminate that "const" qualifier from suser/p_can/etc to reflect
mutex use.
Notes:
o Some further cleanup of the linux/jail code is still required.
o It's now possible to consider resolving some of the process vs
credential based permission checking confusion in the socket code.
o Mutex protection of struct prison is still not present, and is
required to protect the reference count plus some fields in the
structure.
Reviewed by: freebsd-arch
Obtained from: TrustedBSD Project
mtx_enter(lock, type) becomes:
mtx_lock(lock) for sleep locks (MTX_DEF-initialized locks)
mtx_lock_spin(lock) for spin locks (MTX_SPIN-initialized)
similarily, for releasing a lock, we now have:
mtx_unlock(lock) for MTX_DEF and mtx_unlock_spin(lock) for MTX_SPIN.
We change the caller interface for the two different types of locks
because the semantics are entirely different for each case, and this
makes it explicitly clear and, at the same time, it rids us of the
extra `type' argument.
The enter->lock and exit->unlock change has been made with the idea
that we're "locking data" and not "entering locked code" in mind.
Further, remove all additional "flags" previously passed to the
lock acquire/release routines with the exception of two:
MTX_QUIET and MTX_NOSWITCH
The functionality of these flags is preserved and they can be passed
to the lock/unlock routines by calling the corresponding wrappers:
mtx_{lock, unlock}_flags(lock, flag(s)) and
mtx_{lock, unlock}_spin_flags(lock, flag(s)) for MTX_DEF and MTX_SPIN
locks, respectively.
Re-inline some lock acq/rel code; in the sleep lock case, we only
inline the _obtain_lock()s in order to ensure that the inlined code
fits into a cache line. In the spin lock case, we inline recursion and
actually only perform a function call if we need to spin. This change
has been made with the idea that we generally tend to avoid spin locks
and that also the spin locks that we do have and are heavily used
(i.e. sched_lock) do recurse, and therefore in an effort to reduce
function call overhead for some architectures (such as alpha), we
inline recursion for this case.
Create a new malloc type for the witness code and retire from using
the M_DEV type. The new type is called M_WITNESS and is only declared
if WITNESS is enabled.
Begin cleaning up some machdep/mutex.h code - specifically updated the
"optimized" inlined code in alpha/mutex.h and wrote MTX_LOCK_SPIN
and MTX_UNLOCK_SPIN asm macros for the i386/mutex.h as we presently
need those.
Finally, caught up to the interface changes in all sys code.
Contributors: jake, jhb, jasone (in no particular order)
different hardware address, we should drop it (this should only
happen in promiscuous mode). Relocate the code for this check
from before ng_ether(4) processing to after ng_ether(4) processing.
Also fix a compiler warning.
PR: kern/24465
There are two 3rd party code chunks using this still - the IPv6 stuff and
i4b. Give them a private copy as an alternative to changing them too much.
XXX sys/kernel.h still has a #include <sys/module.h> in it. I will be
taking this out shortly - this affects a number of drivers.
in tunopen())
o Change the default device permissions to 0600 root:wheel
(were uucp:dialer)
o Only let root (suser()) change the MTU
This makes it possible for an administrator to open up the
permissions on /dev/tun*, letting non-root programs service
a tun interface. Co-operation is still required with a
priviledged program that will configure the interface side
of things.
valid) if BPF is missing.
The netgraph_bpf node forced bpf to be present, reflect that in the
options.
Stop doing a 'count bpf' - we provide stubs.
Since a handful of drivers still refer to "bpf.h", provide a more accurate
indication that the API is present always. (eg: netinet6)
would *want* to is a different story, but it used to be able to be done
statically. Get rid of #include "loop.h" and struct ifnet loif[NLOOP];
This could be used as an example of how to do this in other drivers,
for example: ccd.
+ configuration: make sure that the NUL at the end of the config
string is properly detected and handled, and the stats passed
up via sysctl properly reflect which interfaces do bridging.
(The whole config support might make good use of some cleanup
in the future).
+ fixed some bugs related to the corruption of multicast and
broadcast packets: make sure that for those packets the entire
IP + ethernet header is in the mbuf, not in a cluster, so
that writes performed in that area by the upper layers do
not affect us.
+ performance: when calling m_pullup, make room for the ethernet header
as well, we are going to add it in right after. Also, change an m_dup
back to m_copypacket. The former is not necessary anymore now, and
it did not help, anyways.
I will do a fast MFC because 95% of this patch is fixing bad bugs
and i doubt anyone would test the fix in CURRENT. Plus the last
two items mostly bring back some code which was already there in 4.0
times.
inline functions non-inlined. Hide parts of the mutex implementation that
should not be exposed.
Make sure that WITNESS code is not executed during boot until the mutexes
are fully initialized by SI_SUB_MUTEX (the original motivation for this
commit).
Submitted by: peter
This is because calls with M_WAIT (now M_TRYWAIT) may not wait
forever when nothing is available for allocation, and may end up
returning NULL. Hopefully we now communicate more of the right thing
to developers and make it very clear that it's necessary to check whether
calls with M_(TRY)WAIT also resulted in a failed allocation.
M_TRYWAIT basically means "try harder, block if necessary, but don't
necessarily wait forever." The time spent blocking is tunable with
the kern.ipc.mbuf_wait sysctl.
M_WAIT is now deprecated but still defined for the next little while.
* Fix a typo in a comment in mbuf.h
* Fix some code that was actually passing the mbuf subsystem's M_WAIT to
malloc(). Made it pass M_WAITOK instead. If we were ever to redefine the
value of the M_WAIT flag, this could have became a big problem.
to negotiate from scratch. Make leased lines survive being put into
loopback mode. Bits and pieces and ideas taken from PRs 11238 and 21771.
Make it a module so that it can be kldloaded. Whitespace cleanup. (Can be
ignored with "cvs diff -b".)
PR: 11238 and 21771 (bits and pieces)
and had no data available returned 0. Now it returns -1 with errno
set to EWOULDBLOCK (== EAGAIN) as it should. This fix makes the bpf
device usable in threaded programs.
Reviewed by: bde
a tunstart function, which is called when a packet is sucessfully
placed on the queue. This allows us to properly do output byte accounting
within the handoff routine.
spending, which was unused now that all software interrupts have
their own thread. Make the legacy schednetisr use an atomic op
for setting bits in the netisr mask.
Reviewed by: jhb
before adding/removing packets from the queue. Also, the if_obytes and
if_omcasts fields should only be manipulated under protection of the mutex.
IF_ENQUEUE, IF_PREPEND, and IF_DEQUEUE perform all necessary locking on
the queue. An IF_LOCK macro is provided, as well as the old (mutex-less)
versions of the macros in the form _IF_ENQUEUE, _IF_QFULL, for code which
needs them, but their use is discouraged.
Two new macros are introduced: IF_DRAIN() to drain a queue, and IF_HANDOFF,
which takes care of locking/enqueue, and also statistics updating/start
if necessary.
* Some dummynet code incorrectly handled a malloc()-allocated pseudo-mbuf
header structure, called "pkt," and could consequently pollute the mbuf
free list if it was ever passed to m_freem(). The fix involved passing not
pkt, but essentially pkt->m_next (which is a real mbuf) to the mbuf
utility routines.
* Also, for dummynet, in bdg_forward(), made the code copy the ethernet header
back into the mbuf (prepended) because the dummynet code that follows expects
it to be there but it is, unfortunately for dummynet, passed to bdg_forward
as a seperate argument.
PRs: kern/19551 ; misc/21534 ; kern/23010
Submitted by: Thomas Moestl <tmoestl@gmx.net>
Reviewed by: bmilekic
Approved by: luigi
