1
0
mirror of https://git.FreeBSD.org/src.git synced 2024-12-25 11:37:56 +00:00
Commit Graph

35545 Commits

Author SHA1 Message Date
KATO Takenori
28791bce44 Sync with sys/i386/i386/machdep.c revision 1.325. 1999-02-12 09:15:33 +00:00
Alexander Langer
43d1df332e Removed occurrences of consecutive repeated words (such as "the the"). 1999-02-12 02:12:08 +00:00
Brian Somers
a8103305cb When executing a command as part of a dial/login/hangup
script, expand words in the same way as !bg does.
1999-02-12 00:52:30 +00:00
Jordan K. Hubbard
115077bdcb Allow both old and new rc.conf syntax. 1999-02-12 00:17:12 +00:00
Bill Paul
021f8bcb89 Do not issue RX and TX reset commands in xl_stop() and xl_init(). On the
3c905B, the RX and TX reset commands also reset the cyclone chip's internal
PHY, which causes it to restart its autonegotiation session. This takes a
second or two to complete, which makes the interface seem to stop responding
for a few seconds every time you do something that reinitializes it.

Issuing the RX and TX resets on the older 3c905 boomerang adapters doesn't
cause any delay because the boomerang chip requires an external PHY.

This should fix the problem where people doing network installs via 3c905B
cards experience a delay after the interface is first initialized, among
other things.
1999-02-11 23:59:29 +00:00
Julian Elischer
da15ec8bf7 Define more registers and fix incorrect (but unused) register bit definitions. 1999-02-11 23:41:21 +00:00
Julian Elischer
f1bf08c22e Define more registers in the PHY unit and use them to report back
the result of the media auto negotiation.

Reviewed by: David Greenman <dg@freebsd.org>
1999-02-11 21:47:10 +00:00
Garrett Wollman
48ee93d6f3 Add a note about the insecurity of MD4 and potential vulnerability of
MD5 to similar attacks.
1999-02-11 20:31:49 +00:00
John Polstra
e9f9010839 Use the fictional server "CHANGE_THIS.FreeBSD.org". Add comments
telling the user to (duh) change it.
1999-02-11 18:14:03 +00:00
John Polstra
3ad4e7ecb3 RELENG_3 is now "the" stable branch. 1999-02-11 18:04:17 +00:00
John Polstra
a0636b3652 Replace the out-of-date list of mirror sites with a reference to the
list in the FreeBSD Handbook.
1999-02-11 17:56:11 +00:00
Wolfram Schneider
c426ed4003 $Id$ misspelled as $Id
Submitted by: bde
1999-02-11 17:09:27 +00:00
Brian Somers
00b001185c /etc/ppp/ppp.*.sample -> /usr/share/examples/ppp/ppp.*.sample 1999-02-11 16:34:15 +00:00
Brian Somers
9e1d50b60f Add ppp example files. 1999-02-11 16:33:14 +00:00
Brian Somers
2e92443c15 Add /usr/share/examples/ppp directory
Don't install /etc/ppp/ppp.*.example
Remove ppp/ppp.{conf,linkup,linkdown,secret}.sample
1999-02-11 16:30:56 +00:00
Jordan K. Hubbard
fc8353317d This tries to install rc.diskless, but there is no such file.
I don't know which of the two to install in its place so just
remove it for now and get the release build working again.
1999-02-11 15:46:22 +00:00
Jordan K. Hubbard
ef56f6db5d Add spanish mirrors to FTP menu. 1999-02-11 14:42:39 +00:00
Jordan K. Hubbard
edc2bcee4d List diamond fireport cards under Symbios section.
Submitted by:		Stephen McKay <syssgm@detir.qld.gov.au>
1999-02-11 14:00:14 +00:00
David E. O'Brien
e34d6163df fix conflicts 1999-02-11 12:49:40 +00:00
David E. O'Brien
53e0b08ae5 This commit was generated by cvs2svn to compensate for changes in r43892,
which included commits to RCS files with non-trunk default branches.
1999-02-11 12:40:22 +00:00
David E. O'Brien
b02401bdd6 Virgin import of ISC-DHCP v2.0b1pl11 1999-02-11 12:40:22 +00:00
David E. O'Brien
b84c1cc993 update for latest import 1999-02-11 12:39:45 +00:00
Roger Hardiman
f02529f9b2 Added ioctl REMOTE_GETKEY for Hauppauge Infra-Red Remote Control.
Submitted by Roger Hardiman.

Added ioctl TVTUNER_GETCHANSET to discover which regions the bktr driver
supports. Submitted by Vsevolod Lobko <seva@alex-ua.com>

Added BT848_GPIO_SET_EN,BT848_GPIO_SET_DATA (and GETs) to allow user land
control of the GPIO pins. This allows a Radio module on the GPIO port
to be controlled. Submitted by Vsevolod Lobko <seva@alex-ua.com>
The kernel option BKTR_GPIO_ACCESS must be used to enable the GPIO ioctls.

Submitted by:	Roger Hardiman and Vsevolod Lobko <seva@alex-ua.com>
1999-02-11 10:22:30 +00:00
Roger Hardiman
29122ece3e Added new ioctls for Hauppage Infra-Red Remote Control support,
Obtaining the supported channel sets and Controlling the GPIO port.

Submitted by:	Roger Hardiman and Vsevolod Lobko <seva@alex-ua.com>
1999-02-11 10:18:04 +00:00
Brian Somers
58330d7bfa When resending chap challenges, resend the same challenge
each time rather than making up a new one.

Increase the authname/authkey max sizes to 100 characters.

Allow ``authkey'' specifications beginning with ``!''.
When a challenge is received, the text following the
``!'' is executed as a program (expanding stuff in the same
way that ``sh'' and ``!bg'' do).  The program is passed the
peer name, peer challenge and local ``authname'' on standard
input and is expected to output the name/key combination that
should be used to build the CHAP response.

This provides support for Secure ID cards (guess what I was
given at work recently!) using CHAP.

Examples will follow.
1999-02-11 10:14:08 +00:00
Mike Smith
e4a5d947a3 Zero p->retval[1] when starting a process. This value ends up in %edx
when the process starts, and having it nonzero causes statically-linked
Linux binaries to fail.

PR:		i386/10015
Submitted by:	Marcel Moolenaar <marcel@scc.nl>
1999-02-11 07:53:28 +00:00
Justin T. Gibbs
957fea92f0 Set the ultra enable bits in the adaptor's scratch ram area only after
we finish modifying our in kernel version during seeprom configuration.
1999-02-11 07:12:16 +00:00
Justin T. Gibbs
ef3c268fde Make the ahc_eisa file also optional on 'eisa'. 1999-02-11 07:11:00 +00:00
Justin T. Gibbs
03c4f58aa3 Ensure that the ACK from the last information transfer phase has been
de-asserted by the initiator before changing phase or releasing the bus.
Corrects a SCSI specification violation in target mode.
1999-02-11 07:10:20 +00:00
Justin T. Gibbs
11eaafb1f1 Completely set information in the transaction description before performing
a selwakeup for it.  Cosmetic.
1999-02-11 07:08:58 +00:00
Justin T. Gibbs
922b8593e6 Correct a race condition where a target mode SCB dma could occur
before we finished setting the pending phase information.

Use the ALL_TARGETS_MASK #define instead of 0xffff for the default
ultraenb mask.
1999-02-11 07:07:27 +00:00
Greg Lehey
9e0aa8e9b8 Correct some indentation
Implicitly-desired-by: bde

update_plex_state:  Handle empty RAID-5 plexes correctly
1999-02-11 06:44:46 +00:00
Greg Lehey
e8b3affb8e build_write_request: correct logic for handling writes to volumes with
failed plexes.

allocrqg: Remove dead code
1999-02-11 06:44:12 +00:00
Greg Lehey
8093cf90f1 check_drive: Make sure that we don't open two different drives with
the same name.  Silently return EEXIST if this happens.

vinum_scandisk: Collect drive numbers, not pointers, to avoid problems
of relocated drives.

Tripped-over-by:  Bernd Walter <ticso@cicely.de>
1999-02-11 06:43:15 +00:00
Greg Lehey
cc902735df In some cases, it's possible that I/O errors will cause the daemon to
time out on an operation.  Under these circumstances, vinum(8) will
automatically start another daemon.  Add a pid for the daemon, so that
an overtaken daemon will discover that it's no longer in favour, and
will crawl into a corner and die.
1999-02-11 06:42:39 +00:00
Greg Lehey
3628210aa7 Modify example configuration file to show more optimum stripe size of
256 kB instead of 16 kB.

Pointed-out-by: Steve Taylor <staylor@cybernet.com>

Modify description of start command to include 'start' with no
parameters, which reads the config from all drives found on the
system.
1999-02-11 06:14:49 +00:00
Greg Lehey
f2c4d303d7 Extend 'start' command: if used without any parameters, vinum scans
all disks known to devstat for vinum drives and reads their
configuration.
1999-02-11 06:14:15 +00:00
Greg Lehey
730ed31899 Check for both kinds of Vinum module (with and without RAID-5). Using
the wrong module can cause confusion, including loading both versions
(which conflict with each other) and incorrect ioctls, which cause
unintelligible error messages.

Extend 'start' command: if used without any parameters, vinum scans
all disks known to devstat for vinum drives and reads their
configuration.
1999-02-11 06:13:44 +00:00
Greg Lehey
77a14d66b8 Include libdevstat in executable, for extended start command. 1999-02-11 06:12:06 +00:00
Joseph Koshy
04e83575bc Fix typos 1999-02-11 06:07:27 +00:00
David E. O'Brien
d2c596b2e7 add -1 option: Try once, if we fail, EXIT
Obtained from:	OpenBSD
1999-02-10 23:51:25 +00:00
David E. O'Brien
ddb444e895 remove cruft I meant to remove 1999-02-10 21:23:48 +00:00
David E. O'Brien
8d7e75d826 hook in dhclient 1999-02-10 21:09:48 +00:00
David E. O'Brien
0bd4ba38d5 * fix paths in manpages
* sort references
1999-02-10 21:02:32 +00:00
David E. O'Brien
7fb45d4f5c This commit was generated by cvs2svn to compensate for changes in r43855,
which included commits to RCS files with non-trunk default branches.
1999-02-10 20:51:22 +00:00
David E. O'Brien
914345e310 bmake framework for ISC-DHCP client 1999-02-10 20:51:22 +00:00
Bill Paul
5a21993c2d The ypbind_setdom_2 procedure returns NULL in the success case. This is
incorrect; returning NULL here means that the dispatcher won't send any
response back to the caller, which means the caller will sit there waiting
until it times out. I don't know how this ever worked before. The effect
is that using 'ypset foo' to get the local ypbind to change servers would
work, but would sit there hanging for a long time for no reason.
1999-02-10 20:04:22 +00:00
David E. O'Brien
71b785ff18 Our default /etc/dhclient.conf. 1999-02-10 18:30:01 +00:00
Dag-Erling Smørgrav
f89801f3c3 Don't use an arbitrary hardcoded value for nfds in select() calls.
PR:		bin/9986
1999-02-10 18:08:51 +00:00
Jordan K. Hubbard
9c63624e6f Use /etc/defaults/rc.conf everywhere, falling back to /etc/rc.conf
as necessary (for half-assed upgrades).
1999-02-10 18:08:16 +00:00