Currently when we map the hca_core_clock page to the user space,
there are vulnerable registers, one of which is semaphore, on
this page as well. If user read the wrong offset, it can modify the
above semaphore and hang the device.
Hence, mapping the hca_core_clock page to the user space only when
user required it specifically.
After this patch, mlx4 core_clock won't be mapped to user space by
default. Oppose to current state, where mlx4 core_clock is always mapped
to user space.
MFC after: 1 week
Reviewed by: kib
Sponsored by: Mellanox Technologies // NVIDIA Networking
IB spec says that a lid should be ignored when link layer is Ethernet,
for example when building or parsing a CM request message (CA17-34).
However, since ib_lid_be16() and ib_lid_cpu16() validates the slid,
not only when link layer is IB, we set the slid to zero to prevent
false warnings in the kernel log.
Linux commit:
65389322b28f81cc137b60a41044c2d958a7b950
MFC after: 1 week
Reviewed by: kib
Sponsored by: Mellanox Technologies // NVIDIA Networking
Since neither ib_post_send() nor ib_post_recv() modify the data structure
their second argument points at, declare that argument const. This change
makes it necessary to declare the 'bad_wr' argument const too and also to
modify all ULPs that call ib_post_send(), ib_post_recv() or
ib_post_srq_recv(). This patch does not change any functionality but makes
it possible for the compiler to verify whether the
ib_post_(send|recv|srq_recv) really do not modify the posted work request.
Linux commit:
f696bf6d64b195b83ca1bdb7cd33c999c9dcf514
7bb1fafc2f163ad03a2007295bb2f57cfdbfb630
d34ac5cd3a73aacd11009c4fc3ba15d7ea62c411
MFC after: 1 week
Reviewed by: kib
Sponsored by: Mellanox Technologies // NVIDIA Networking
All callers to ib_modify_qp_is_ok() provides enum ib_qp_state makes the
checks of out-of-scope redundant. Let's remove them together with updating
function signature to return boolean result.
While at it remove unused "ll" parameter from ib_modify_qp_is_ok().
Linux commit:
19b1f54099b6ee334acbfbcfbdffd1d1f057216d
d31131bba5a1630304c55ea775c48cc84912ab59
MFC after: 1 week
Reviewed by: kib
Sponsored by: Mellanox Technologies // NVIDIA Networking
In order to improve readability, add ib_port_phys_state enum to replace
the use of magic numbers.
Linux commit:
72a7720fca37fec0daf295923f17ac5d88a613e1
MFC after: 1 week
Reviewed by: kib
Sponsored by: Mellanox Technologies // NVIDIA Networking
Given all the code does operate on struct ifnet, the last step in this
longer series of changes now is to rename struct net_device to
struct ifnet (that is what it was defined to in the LinuxKPi code).
While mlx4 and OFED are "shared" code the decision was made years ago
to not write it based on the netdevice KPI but the native ifnet KPI
for most of it. This commit simply spells this out and with that
frees "struct netdevice" to be re-done on LinuxKPI to become a more
native/mixed implementation over time as needed by, e.g., wireless
drivers.
Sponsored by: The FreeBSD Foundation
MFC after: 10 days
Reviewed by: hselasky
Differential Revision: https://reviews.freebsd.org/D30515
The LinuxKPI net_device actually is an ifnet; in order to further
clean that up so we can extend "net_device" replace the few macros
inline in mlx4.
Sponsored by: The FreeBSD Foundation
MFC after: 12 days
Reviewed by: kib
Differential Revision: https://reviews.freebsd.org/D30476
This removes all unused bits from linux/netdevice.h and migrates two
inline functions into the mlx4 and ofed code respectively.
This gets the mlx4/ofed (struct ifnet) specific bits down to 7 lines
in netdevice.h.
Sponsored by: The FreeBSD Foundation
MFC after: 13 days
Reviewed by: hselasky, kib
Differential Revision: https://reviews.freebsd.org/D30461
Remove linux/inetdevice.h as neither of the two inline functions there
are used here.
Sposored-by: The FreeBSD Foundation
MFC-after: 2 weeks
Reviewed-by: hselasky
X-D-R: D29366 (extracted as further cleanup)
Differential Revision: https://reviews.freebsd.org/D29428
Since commit 8fa6abb6f4 ("Expose clang's alignment builtins and use
them for roundup2/rounddown2"), clang emits warnings for several
alignment operations in these drivers because the operation is a no-op.
The compiler is arguably being too strict here, but in the meantime
let's silence the warnings by conditionally compiling the alignment
operations.
Reviewed by: arichardson, hselasky
MFC after: 3 days
Differential Revision: https://reviews.freebsd.org/D28576
-pci_get_class : This function search for a matching pci device based on
the class/subclass and returns a newly created pci_dev.
- pci_{save,restore}_state : This is analogous to ours with the same name
- pci_is_root_bus : Return true if this is the root bus
- pci_get_domain_bus_and_slot : This function search for a matching pci
device based on domain, bus and slot/function concat into a single
unsigned int (devfn) and returns a newly created pci_dev
- pci_bus_{read,write}_config* : Read/Write to the config space.
While here add some helper function to alloc and fill the pci_dev struct.
Reviewed by: hselasky, bz (older version)
Differential Revision: https://reviews.freebsd.org/D27550
Refer to the Linux commit mentioned below for a more detailed description.
Linux commit:
a18177925c252da7801149abe217c05b80884798
Requested by: Isilon
MFC after: 1 week
Sponsored by: Mellanox Technologies // NVIDIA Networking
Currently the linking order of the infiniband, IB, modules decide in which
order the clients are attached and detached. For example one IB client may
use resources from another IB client. This can lead to a potential deadlock
at shutdown. For example if the ipoib is unregistered after the ib_multicast
client is detached, then if ipoib is using multicast addresses a deadlock may
happen, because ib_multicast will wait for all its resources to be freed before
returning from the remove method.
Fix this by using module_xxx_order() instead of module_xxx().
Differential Revision: https://reviews.freebsd.org/D23973
MFC after: 1 week
Sponsored by: Mellanox Technologies
Make sure we disable the multicast filter in promiscious mode aswell as when
the all multicast flag is set.
MFC after: 1 week
Found by: Tycho Nightingale <tychon@freebsd.org>
Sponsored by: Mellanox Technologies
Remove TSO from the toggle mask when automatically disabled by TXCKSUM* in
various NIC drivers.
Reviewed by: hselasky, np, gallatin, jpaetzel
Approved by: mav (mentor)
MFC after: 1 week
Sponsored by: iXsystems, Inc.
Differential Revision: https://reviews.freebsd.org/D25120
r357614 added CTLFLAG_NEEDGIANT to make it easier to find nodes that are
still not MPSAFE (or already are but aren’t properly marked).
Use it in preparation for a general review of all nodes.
This is non-functional change that adds annotations to SYSCTL_NODE and
SYSCTL_PROC nodes using one of the soon-to-be-required flags.
Mark all obvious cases as MPSAFE. All entries that haven't been marked
as MPSAFE before are by default marked as NEEDGIANT
Approved by: kib (mentor, blanket)
Commented by: kib, gallatin, melifaro
Differential Revision: https://reviews.freebsd.org/D23718
Make sure all receive completion callbacks are covered by the network
EPOCH(9), because this is required when calling if_input() and
ether_input() after r357012.
Convert some spaces to tabs while at it.
Sponsored by: Mellanox Technologies
Debugnet is a simplistic and specialized panic- or debug-time reliable
datagram transport. It can drive a single connection at a time and is
currently unidirectional (debug/panic machine transmit to remote server
only).
It is mostly a verbatim code lift from netdump(4). Netdump(4) remains
the only consumer (until the rest of this patch series lands).
The INET-specific logic has been extracted somewhat more thoroughly than
previously in netdump(4), into debugnet_inet.c. UDP-layer logic and up, as
much as possible as is protocol-independent, remains in debugnet.c. The
separation is not perfect and future improvement is welcome. Supporting
INET6 is a long-term goal.
Much of the diff is "gratuitous" renaming from 'netdump_' or 'nd_' to
'debugnet_' or 'dn_' -- sorry. I thought keeping the netdump name on the
generic module would be more confusing than the refactoring.
The only functional change here is the mbuf allocation / tracking. Instead
of initiating solely on netdump-configured interface(s) at dumpon(8)
configuration time, we watch for any debugnet-enabled NIC for link
activation and query it for mbuf parameters at that time. If they exceed
the existing high-water mark allocation, we re-allocate and track the new
high-water mark. Otherwise, we leave the pre-panic mbuf allocation alone.
In a future patch in this series, this will allow initiating netdump from
panic ddb(4) without pre-panic configuration.
No other functional change intended.
Reviewed by: markj (earlier version)
Some discussion with: emaste, jhb
Objection from: marius
Differential Revision: https://reviews.freebsd.org/D21421
This was enumerated with exhaustive search for sys/eventhandler.h includes,
cross-referenced against EVENTHANDLER_* usage with the comm(1) utility. Manual
checking was performed to avoid redundant includes in some drivers where a
common os_bsd.h (for example) included sys/eventhandler.h indirectly, but it is
possible some of these are redundant with driver-specific headers in ways I
didn't notice.
(These CUs did not show up as missing eventhandler.h in tinderbox.)
X-MFC-With: r347984
Make sure the enter and leave polling routines can be called multiple times
with same setting. Ignore setting polling or event mode twice. This fixes a
deadlock during shutdown if polling mode was already selected.
MFC after: 1 week
Sponsored by: Mellanox Technologies
mlx4_en_stop_port() calls mlx4_en_put_qp() which can refer the link level
address of the network interface, which in turn will be freed by the
network interface detach function. Make sure the port is stopped
before detaching the network interface.
MFC after: 1 week
Sponsored by: Mellanox Technologies
It can happen during shutdown that the lock will recurse when the mlx4en(4)
instance is part of a lagg interface. Call ether_ifdetach() unlocked.
Backtrace:
panic(): _sx_xlock_hard: recursed on non-recursive sx &mdev->state_lock
_sx_xlock_hard()
_sx_xlock()
mlx4_en_ioctl()
if_setlladdr()
lagg_port_destroy()
lagg_port_ifdetach()
if_detach()
mlx4_en_destroy_netdev()
mlx4_en_remove()
mlx4_remove_device()
mlx4_unregister_device()
mlx4_unload_one()
mlx4_shutdown()
linux_pci_shutdown()
bus_generic_shutdown()
MFC after: 1 week
Sponsored by: Mellanox Technologies
Copy small packets like TCP ACKs into a new mbuf
reusing the existing mbuf to receive a new ethernet
frame. This avoids wasting buffer space for
small sized packets.
Submitted by: hselasky@
Approved by: hselasky (mentor)
MFC after: 1 week
Sponsored by: Mellanox Technologies
Adding an interface might be done outside the device_attach() routine
and will then cause a panic, due to the VNET not being defined.
Submitted by: hselasky@
Approved by: hselasky (mentor)
MFC after: 1 week
Sponsored by: Mellanox Technologies
The "priv->pkstats.rx_dropped" is written twice in a row.
Submitted by: hselasky@
Approved by: hselasky (mentor)
MFC after: 1 week
Sponsored by: Mellanox Technologies
Also when the MTU is greater than MCLBYTES.
Submitted by: hselasky@
Approved by: hselasky (mentor)
MFC after: 1 week
Sponsored by: Mellanox Technologies
The hardware queues are deep enough currently and using the DRBR and associated
callbacks only leads to more task switching in the TX path. The is also a race
setting the queue_state which can lead to hung TX rings.
Submitted by: hselasky@
Approved by: hselasky (mentor)
MFC after: 1 week
Sponsored by: Mellanox Technologies
In last mlx4 update (r325841) we lost the sysctl to show the
firmware version for mlx4 devices.
Add both board identifier and firmware version under:
sys.device.mlx4_core0.hw sysctl node.
Approved by: hselasky (mentor)
MFC after: 1 week
Sponsored by: Mellanox Technologies
When acting as a VF it is required to add steering rules for all unicast
addresses. Even if promiscious mode is selected. Else incoming data packets
will be dropped.
MFC after: 3 days
Approved by: re (gjb)
Sponsored by: Mellanox Technologies
When receiving a PCP change all GID entries are reloaded.
This ensures the relevant GID entries use prio tagging,
by setting VLAN present and VLAN ID to zero.
The priority for prio tagged traffic is set using the regular
rdma_set_service_type() function.
Fake the real network device to have a VLAN ID of zero
when prio tagging is enabled. This is logic is hidden inside
the rdma_vlan_dev_vlan_id() function which must always be used
to retrieve the VLAN ID throughout all of ibcore and the
infiniband network drivers.
The VLAN presence information then propagates through all
of ibcore and so incoming connections will have the VLAN
bit set. The incoming VLAN ID is then checked against the
return value of rdma_vlan_dev_vlan_id().
MFC after: 1 week
Sponsored by: Mellanox Technologies
This fixes 32-bit compat (no ioctl command defintions are required
as struct ifreq is the same size). This is believed to be sufficent to
fully support ifconfig on 32-bit systems.
Reviewed by: kib
Obtained from: CheriBSD
MFC after: 1 week
Relnotes: yes
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D14900
Creating a UD address handle from user-space or from the kernel-space,
when the link layer is ethernet, requires resolving the remote L3
address into a L2 address. Doing this from the kernel is easy because
the required ARP(IPv4) and ND6(IPv6) address resolving APIs are readily
available. In userspace such an interface does not exist and kernel
help is required.
It should be noted that in an IP-based GID environment, the GID itself
does not contain all the information needed to resolve the destination
IP address. For example information like VLAN ID and SCOPE ID, is not
part of the GID and must be fetched from the GID attributes. Therefore
a source GID should always be referred to as a GID index. Instead of
going through various racy steps to obtain information about the
GID attributes from user-space, this is now all done by the kernel.
This patch optimises the L3 to L2 address resolving using the existing
create address handle uverbs interface, retrieving back the L2 address
as an additional user-space information structure.
This commit combines the following Linux upstream commits:
IB/core: Let create_ah return extended response to user
IB/core: Change ib_resolve_eth_dmac to use it in create AH
IB/mlx5: Make create/destroy_ah available to userspace
IB/mlx5: Use kernel driver to help userspace create ah
IB/mlx5: Report that device has udata response in create_ah
MFC after: 1 week
Sponsored by: Mellanox Technologies
