primary object type, and then by secondarily by method name. This sorts
entry points relating to particular objects, such as pipes, sockets, and
vnodes together.
Sponsored by: SPARTA (original patches against Mac OS X)
Obtained from: TrustedBSD Project, Apple Computer
the PS/2 mouse controller. Thus, when acpi_ibm(4) claimed the mouse
device, the mouse would stop working. The one ACPI dump of an R40 that
I've looked at includes an HKEY device with the proper "IBM0068" ID, so
I'm not sure how the "IBM0057" ID could have helped at all.
MFC after: 1 week
Approved by: njl
Rework the read/write support in the bios disk driver some to cut down
on duplicated code.
- All of the bounce buffer and retry logic duplicated in bd_read() and
bd_write() are merged into a single bd_io() routine that takes an
extra direction argument. bd_read() and bd_write() are now simple
wrappers around bd_io().
from mac_vfs.c to mac_process.c to join other functions that setup up
process labels for specific purposes. Unlike the two proc create calls,
this call is intended to run after creation when a process registers as
the NFS daemon, so remains an _associate_ call..
Obtained from: TrustedBSD Project
than mac_<policy>_whatever, as this shortens the names and makes the code
a bit easier to read.
When dealing with label structures, name variables 'mb', 'ml', 'mm rather
than the longer 'mac_biba', 'mac_lomac', and 'mac_mls', likewise making
the code a little easier to read.
Obtained from: TrustedBSD Project
order. The kernel used to shuffle them around to get things right,
but that was recently fixed. This makes our boot loader match the
behavior of most other boot loaders for the atmel parts. This bug was
inherited from the Kwikbyte loader that we started from.
This bug was discovered by Bj.ANvrn KNvnig back in June, but fell on the
floor. He provided patches to the kernel, include backwards
compatibility options that were similar to Olivier's if_ate.c commit.
in the same order as it's set in ate_set_mac.
I remember a discussion about this on -arm, but apparently nothing was done.
Warner, is this wrong ?
X-MFC After: proper review
on i386 and amd64 machines. The overall process is that /boot/pmbr lives
in the PMBR (similar to /boot/mbr for MBR disks) and is responsible for
locating and loading /boot/gptboot. /boot/gptboot is similar to /boot/boot
except that it groks GPT rather than MBR + bsdlabel. Unlike /boot/boot,
/boot/gptboot lives in its own dedicated GPT partition with a new
"FreeBSD boot" type. This partition does not have a fixed size in that
/boot/pmbr will load the entire partition into the lower 640k. However,
it is limited in that it can only be 545k. That's still a lot better than
the current 7.5k limit for boot2 on MBR. gptboot mostly acts just like
boot2 in that it reads /boot.config and loads up /boot/loader. Some more
details:
- Include uuid_equal() and uuid_is_nil() in libstand.
- Add a new 'boot' command to gpt(8) which makes a GPT disk bootable using
/boot/pmbr and /boot/gptboot. Note that the disk must have some free
space for the boot partition.
- This required exposing the backend of the 'add' function as a
gpt_add_part() function to the rest of gpt(8). 'boot' uses this to
create a boot partition if needed.
- Don't cripple cgbase() in the UFS boot code for /boot/gptboot so that
it can handle a filesystem > 1.5 TB.
- /boot/gptboot has a simple loader (gptldr) that doesn't do any I/O
unlike boot1 since /boot/pmbr loads all of gptboot up front. The
C portion of gptboot (gptboot.c) has been repocopied from boot2.c.
The primary changes are to parse the GPT to find a root filesystem
and to use 64-bit disk addresses. Currently gptboot assumes that the
first UFS partition on the disk is the / filesystem, but this algorithm
will likely be improved in the future.
- Teach the biosdisk driver in /boot/loader to understand GPT tables.
GPT partitions are identified as 'disk0pX:' (e.g. disk0p2:) which is
similar to the /dev names the kernel uses (e.g. /dev/ad0p2).
- Add a new "freebsd-boot" alias to g_part() for the new boot UUID.
MFC after: 1 month
Discussed with: marcel (some things might still change, but am committing
what I have so far)
the PCIOCGETCONF, PCIOCREAD and PCIOCWRITE IOCTLs, which was broken
with the introduction of PCI domain support.
As the size of struct pci_conf_io wasn't changed with that commit,
this unfortunately requires the ABI of PCIOCGETCONF to be broken
again in order to be able to provide backwards compatibility to
the old version of that IOCTL.
Requested by: imp
Discussed with: re (kensmith)
Reviewed by: PCI maintainers (imp, jhb)
MFC after: 5 days
from Mac OS X Leopard--rationalize naming for entry points to
the following general forms:
mac_<object>_<method/action>
mac_<object>_check_<method/action>
The previous naming scheme was inconsistent and mostly
reversed from the new scheme. Also, make object types more
consistent and remove spaces from object types that contain
multiple parts ("posix_sem" -> "posixsem") to make mechanical
parsing easier. Introduce a new "netinet" object type for
certain IPv4/IPv6-related methods. Also simplify, slightly,
some entry point names.
All MAC policy modules will need to be recompiled, and modules
not updates as part of this commit will need to be modified to
conform to the new KPI.
Sponsored by: SPARTA (original patches against Mac OS X)
Obtained from: TrustedBSD Project, Apple Computer
on duplicated code and support 64-bit LBAs for GPT.
- The code to manage an EDD or C/H/S I/O request are now in their own
routines. The EDD routine now handles a full 64-bit LBA instead of
truncating LBAs to the lower 32-bits. (MBRs and BSD labels only
have 32-bit LBAs anyway, so the only LBAs ever passed down were 32-bit).
- All of the bounce buffer and retry logic duplicated in bd_read() and
bd_write() are merged into a single bd_io() routine that takes an
extra direction argument. bd_read() and bd_write() are now simple
wrappers around bd_io().
- If a disk supports EDD then always use it rather than only using it if
the cylinder is > 1023. Other parts of the boot code already do
something similar to this. Also, GPT just uses LBAs, so for a GPT disk
it's probably best to ignore C/H/S completely. Always using EDD when
it is supported by a disk is an easy way to accomplish this.
MFC after: 1 week
Slightly cleanup the 'bootdev' concept on x86 by changing the various
macros to treat the 'slice' field as a real part of the bootdev instead
of as hack that spans two other fields (adaptor (sic) and controller)
that are not used in any modern FreeBSD boot code.
macros to treat the 'slice' field as a real part of the bootdev instead
of as hack that spans two other fields (adaptor (sic) and controller)
that are not used in any modern FreeBSD boot code.
MFC after: 1 week
own line. We made this change in traceroute(8) some time ago. This
is particularly useful when you are not resolving hostnames since ip6
addresses can be quite long, and lines wrap fairly easily in the
multi-path router case.
Discussed with: bz
MFC after: 1 month
audit it at the beginning of the syscall. This fixes a problem
where the user supplies an invalid process ID which is > 0 which
results in the PID argument not being audited.
Obtained from: TrustedBSD Project
MFC after: 1 week
state is stored in an extended subject token now. Make sure
that we are using the extended data. This fixes the termID
for process tokens.
Obtained from: TrustedBSD Project
Discussed with: rwatson
MFC after: 1 week
After discussions with jeff, alc, (various Ironport people), david Xu,
and mostly Alfred (who found the problem) it has been demonstrated that this
is not needed for our implementations of threads and represents a real
(as in we've seen it happen a lot) deadlock danger.
Several points:
Since forking multiple threads is not allowed, and posix states that
any mutexes owned by othre threads wilol be owned in the child by
phantom threads, and therads shouldn't ba accessing shared structures without
protection, It can be proved that if this leads to the child process accessing
inconsistent data, it's a programming error.
The mode of thread_single() being used in fork() is the wrong one.
It is using SINGLE_NO_EXIT when it should be using SINGLE_BOUNDARY.
Even if this we used, System processes have no need to do it as they have
no userland to get inconsistent.
This commmit first fixes the above bugs to get tehm correct in CVS.
then removes them with #ifdef.
This is so that history contains the corrected version should it
be needed in the future.
This code may be needed if we implement the forkall() syscall from
Solaris. It may be needed for other non-posix thread libraries
at some time in the future, so let the code sit for a short while
while I do some work on it anyhow.
This removes a reproducible lockup in NFS.
It may be argued that maybe doing a fork while holding a vnode lock may
not be the best idea in th efirst place but it shouldn't cause a deadlock.
The removal has been running under soak test for several days now.
This removal should be seriously considered for 7.0 and RELENG_6.
Note. There is code in the core-dumping code that may have a similar problem
with coredumping threaded processes
MFC After: 4 days
the ones mentioned in its log message:
For mount-update from rw to ro:
- don't misuse the MNT_FORCE flag to break error handling for mark volume
to clean.
- mark volume back to dirty if g_access() failed (not just if mark volume
to clean failed).
- clear pm_fmod on success. pm_fmod is bogus, since it is only used to
cause a panic in unreachable code when we forgot to clear it here, but
something like it will be needed.
For mount-update from rw to ro and from ro to rw:
- don't forget to lock mp when changing mp->mnt_flag. Giant locking
may make this unnecessary, but it is simpler to copy what ffs does.
Most of the style changes are near here, to copy ffs's cleaner code.
For unmount:
- don't misuse the MNT_FORCE flag to break error handling for mark volume
to clean. Failure of markvoldirty() is similar to failure of
ffs_subupdate() in ffs, and ffs has never used MNT_FORCE to ignore
the corresponding error. MNT_FORCE for unmount _should_ force the
unmount to succeed, but forcing away of write errors has never been
supported.
- explicitly return 0 instead of `error' in msdosfs_unmount() after
committing to success. This is now just a style fix. With errors from
markvoldirty() ignored in the MNT_FORCE case, any error in markvoldirty()
caused a nonzero `error' to be returned despite committing to success.
Upper layers soon paniced trying to back out of the committed unmount.
This bug used to be present in another form in most file systems.
VOP_CLOSE() was called after committing to success, so it was necessary
to force the VOP_CLOSE() to succeed. This was not done; instead,
VOP_CLOSE()'s error code was returned to upper layers so upper layers
soon paniced if VOP_CLOSE() failed. I saw this panic only with a buggy
device driver with a missing close method, but VOP_CLOSE() can easily
fail in theory, with errors like EDQUOT and EIO for unwriteable output.
Now the bug has moved. g_vfs_close() is called instead of VOP_CLOSE(),
and it returns void so unmount vops cannot even detect errors in it.
Hopefully, errors in it only occur when there are other bugs. E.g.,
with the MNT_FORCE bug in msdosfs_close(), when markvoldirty() in
umount failed due to the bugs in mount-update, and when this was the
only write error, g_vfs_close() was reached despite the write error
being detected earlier; it found one unwriteable buffer which it can
only report via printf; then after fixing the panic, umount(2)
"succeeded" but the unwriteable buffer was left in the buffer cache
and/or VMIO object to spam the console with printfs about failed
write attempts, until the next rw mount when the write succeeds,
possibly clobbering different media.
