The work in r258233 hardcoded the assumption that tests was the last component
of the tests tree by pushing tests as an explicit prefix for the paths in
BSD.tests.dist and /usr was the prefix for all tests, per BSD.usr.dist and all
of the mtree calls used in Makefile.inc1. This assumption breaks if/when one
provides a custom TESTSBASE "prefix", e.g. TESTSBASE=/mytests .
One thing that r258233 did properly though was remove "/usr/tests" creation
from BSD.usr.dist -- that should have not been there in the first place. That
was an "oops" on my part for the work that was originally committed in r241823
MFC after: 2 weeks
Phabric: D1301
Reviewed by: imp
Sponsored by: EMC / Isilon Storage Division
initgroups(3) was called, what isn't quite enough. This brings jail(8)
in line with jexec(8), which was already doing the right thing.
PR: 195984
MFC after: 1 week
function parameters, the card has to be in transfer state. If it is in
the idle state, the commands are ignored. This caused us not to set
the proper parameters that we later assume to be present, leading to
downstream failures of the card / interface as our state machine
mismatches the card's.
Submitted by: Svatopluk Kraus <onwahe at gmail.com>, Michal Meloun
<meloun at miracle.cz>
we import it along with utilities in elftoolchain.
Differential Revision: https://reviews.freebsd.org/D1330
Reviewed by: emaste
Sponsored by: The FreeBSD Foundation
into namecache, to avoid cache trashing when doing large operations.
E.g., tar archive extraction is not usually followed by access to many
of the files created.
Right now, each VOP_LOOKUP() implementation explicitely knowns about
this quirk and tests for both MAKEENTRY flag presence and op != CREATE
to make the call to cache_enter(). Centralize the handling of the
quirk into VFS, by deciding to cache only by MAKEENTRY flag in VOP.
VFS now sets NOCACHE flag for CREATE namei() calls.
Note that the change in semantic is backward-compatible and could be
merged to the stable branch, and is compatible with non-changed
third-party filesystems which correctly handle MAKEENTRY.
Suggested by: Chris Torek <torek@pi-coral.com>
Reviewed by: mckusick
Tested by: pho
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
it's not just 11b/11g.
The following was happening, and it's quite .. annoyingly grr-y.
* create vap, setup wpa_supplicant with no bgscanning, etc - there's
no call to ieee80211_media_change, so vap->iv_des_mode is
IEEE80211_MODE_AUTO;
* do ifconfig wlan0 scan - same thing, media_change doesn't get called,
iv_des_mode stays as auto.
* But then, run wpa_cli and do 'scan' - it'll do a media change.
* if you're on 11ng, vap->iv_des_mode gets changed to IEEE80211_MODE_11NG
* Then makescanlist() is called. There's a block of code that gets
called if iv_des_mode != IEEE80211_MODE_AUTO, and it does this:
if (vap->iv_des_mode != IEEE80211_MODE_11G ||
mode != IEEE80211_MODE_11B)
continue;
mode = IEEE80211_MODE_11G; /* upgrade */
* .. now, iv_des_mode is not IEEE80211_MODE_11G, so it always runs
'continue'
* .. and thus the scan list stays empty and no further channel
scans occur. Ever.(1)
If you then disassociate and try associating to something, your
scan table has likely been purged / aged out and you'll never
see anything in the scan list.
(1) You need to do 'ifconfig wlan0 mode auto' or just destroy/re-create
the VAP to get working wireless again.
Tested:
* iwn(4) - intel 5300 wifi; STA mode; using wpa_supplicant; bgscan
enabled -and- wpa_supplicant scanning.
Thanks to:
* Everyone who kept poking me about this and wondering why the hell
their wifi would eventually stop seeing scan lists. Grr.
I eventually snapped this evening and dug back into this code.
new dpv(3) wrapper to dialog(3) dialog_gauge(). The dpv(3) library provides
a more flexible and refined interface similar to dialog_mixedgauge() however
is implemented atop the more generalized dialog_gauge() for portability.
Noticeable improvements in bsdinstall's distextract will be a status line
showing data rate information (with support for localeconv(3) to format
numbers according to $LANG or $LC_ALL conversion information), i18n support,
improved auto-sizing of gauge widget, a ``wheel barrow'' to keep the user
informed that things are moving (even if status/progress has not changed),
improved color support (mini-progress bars use the same color, if enabled,
as the main gauge bar), and several other improvements (some not visible).
dpv stands for "dialog progress view" (dpv was introduced in SVN r274116).
Differential Revision: https://reviews.freebsd.org/D714
Discussed on: -current
Reviewed by: julian
MFC after: 3 days
X-MFC-to: stable/10
Relnotes: Improved installer feedback from bsdinstall distextract
Corresponds to 727fc41e077139570ea8b8ddfd6c546b2a55627c.
This allows us to use -no-integrated-as with clang, if we prefer.
Obtained from: binutils-gdb (Relicensed from Alan Modra as GPLv2)
MFC after: 2 weeks
X-MFC-with: r275718
when strip gets replaced at install time by adding it to ITOOLS for the
default usr.bin/xinstall STRIP_CMD
This will fix the failure noted in this Jenkins build step:
https://jenkins.freebsd.org/job/Build-UFS-image/688/
This will also fix the issue reported by alfred@ dealing with installing on
targets that differ from build hosts (e.g. installing on i386/i386 when built
on amd64/amd64)
MFC after: 1 week
Sponsored by: EMC / Isilon Storage Division
This speeds up building the directory from the bootstrap-tools stage in
buildworld as well as building from the subdirectory
Based on a patch submitted via -arch:
https://lists.freebsd.org/pipermail/freebsd-arch/2014-December/016493.html
MFC after: 1 week
Submitted by: Jia-Shiun Li <jiashiun@gmail.com>
Sponsored by: EMC / Isilon Storage Division
While in most cases CTL should correctly fetch those values from backing
storages, there are some initiators (like MS SQL), that may not like large
physical block sizes, even if they are true. For such cases allow override
fetched values with supported ones (like 4K).
MFC after: 1 week
While we don't support MCS, hole in received sequence numbers may mean
only PDU loss. While we don't support lost PDU recovery, terminate the
connection to avoid stuck commands.
While there, improve handling of sequence numbers wrap after 2^32 PDUs.
MFC after: 2 weeks
When requested to strip specific symbols (-N flag) the default should be
to strip nothing (other than the requested symbols). This is consistent
with binutils strip(1).
PR: 196038
Reviewed by: imp
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D1327
Initialize the 8259 such that IRQ7 is the lowest priority.
Reviewed by: tychon
Differential Revision: https://reviews.freebsd.org/D1322
MFC after: 1 week
dlinfo() is a weak reference that may not be initialized at the time of
execution. The default implementation (in lib/libc/gen/dlfcn.c) neither
modifies the address pointed to by the third argument nor returns an error.
Differential Revision: https://reviews.freebsd.org/D1326
Reviewed by: markj
MFC after: 1 week
When returning to usermode, the handler for that exceptions is also
executed with wrong gs base. Handle all three possible faults in the
same way, checking for iret fault, and performing full iret.
Sponsored by: The FreeBSD Foundation
MFC after: 3 days
Summary:
This change converts NanoBSD into a two-script bundle.
- defaults.sh contains all non-CLI code. Most NanoBSD code is moved into
this file.
- nanobsd.sh now consists just of a command line interface that calls into
functions in defaults.sh.
Test Plan: Run NanoBSD using a previously-working configuration.
Reviewers: imp
Reviewed By: imp
Differential Revision: https://reviews.freebsd.org/D1321
The C11 standard introduced a set of macros (CMPLX, CMPLXF, CMPLXL) that
can be used to construct complex numbers from a pair of real and
imaginary numbers. Unfortunately, they require some compiler support,
which is why we only define them for Clang and GCC>=4.7.
The cpack() function in libm performs the same task as CMPLX(), but
cannot be used to generate compile-time constants. This means that all
invocations of cpack() can safely be replaced by C11's CMPLX(). To keep
the code building with GCC 4.2, provide copies of CMPLX() that can at
least be used to generate run-time complex numbers.
This makes it easier to build some of the functions outside of libm.
is deasserted. Prior to this change each assertion on a level triggered irq
pin resulted in two interrupts being delivered to the CPU.
Differential Revision: https://reviews.freebsd.org/D1310
Reviewed by: tychon
MFC after: 1 week
sheet, RX filter should be disabled before programming.
Previously it was clearing wrong bits so RX filter was not
disabled in RX filter configuration.
Reported by: brad@OpenBSD.org
Plug a memory leak in libzfs. In zfs_iter_bookmarks, an nvlist is allocated
before calling lzc_get_bookmarks, which allocates the nvlist again (and
overwrites the pointer to previously allocated list).
Illumos issue:
5427 memory leak in libzfs when doing rollback
MFC after: 2 weeks
Convert ARC flags to use enum. Previously, public flags are defined in
arc.h and private flags are defined in arc.c which can lead to confusion
and programming errors.
Consistently use 'hdr' (when referencing arc_buf_hdr_t) instead of 'buf'
or 'ab' because arc_buf_t are often named 'buf' as well.
Illumos issue:
5369 arc flags should be an enum
5370 consistent arc_buf_hdr_t naming scheme
MFC after: 2 weeks
