- cleanups,
- whiteout support
- bug fixes (chflags missing on a few file types etc)
The dump/restore folks would want to have a closer look at this, the
change is pretty big.
- use new getvfsbyname() interface and mount(2) interface
**DANGER WILL ROBINSON!!** You must be running a -current kernel
from within a week or so in order for this to work!
2578 from Julian A. Likely not strictly needed, but it doesn't hurt
and protects ping against possible buffer overflows if the resolver
were to return large IP addresses.
used spaces to align the second line under the program name.
2) Cache uid after call to setuid(getuid()) so we don't waste a system call
for each packet with a call to getuid for the -v case.
3) Update manual to reflect new restriction on -l from last delta.
Suggested by: bde, Bill Fenner
2) Must be root to run preload (OpenBSD ping.c 1.8)
3) Don't print all replies unless verbose and root (from idea in
OpenBSD ping.c 1.10 and 1.11) to avoid leaking information available
only to root.
4) Remove unused h: from option string to getopt.
5) Make the compiler happy with exit(0) (Lite-2?)
Reviewed by: Dan Cross <tenser@spitfire.ecsel.psu.edu>
Good candidate for 2.2 and 2.1 (as are many of the 1.17 changes).
Do a better job of argument parsing.
Don't permit ping -f to a multicast address (very antisocial).
Don't permit -L, -I, -T options with unicast addresses.
Ensure that we ask for only AF_INET addresses (should close PR#2584).
Return <sysexits.h> error codes for failures. Document this.
Fix man page to identify the author and put sections in correct order.
buffer (so more difficult to exploit but better safe than sorry). Found
by comparing FreeBSD & OpenBSD sources/logs for the auditing process.
Reviewed by: Warner Losh
Obtained from: OpenBSD
Submitted by: Bruce Murphy <packrat@iinet.net.au>
Add '-a' audible flag, so terminal will beep upon receipt of a reply
packet. Useful for debugging ethernet runs, among other things.
/etc/rc started with "daemon" settings.
"window=" started with "default" settings
gettys started with "default" settings.
This should open the way to junk kernel options MAX_{OPEN,CHILD}
and the corresponding sysctl vars.
- Use MAP_FAILED instead of the constant -1 to indicate
failure (required by POSIX).
- Removed flag arguments of '0' (required by POSIX).
- Fixed code which expected an error return of 0.
- Fixed code which thought any address with the high bit set
was an error.
- Check for failure where no checks were present.
Discussed with: bde
This will make a number of things easier in the future, as well as (finally!)
avoiding the Id-smashing problem which has plagued developers for so long.
Boy, I'm glad we're not using sup anymore. This update would have been
insane otherwise.
ftp.sgi.com:sgi/src/routed.tar.Z has a fix that has been cooking for a week
or so and that fixes a problem in the new hash tables for zillions of
interface aliases. The bug was that interfaces that come and go, such
as for SLIP and PPP, would get permanently lost.
Submitted by: Vernon J. Schryver <vjs@mica.denver.sgi.com>
dirs.c:
From OpenBSD 1.2, 1.3, 1.5, 1.8, 1.10, 1.11, 1.12
1.2:
use unique temporary files; netbsd pr#2544;
lukem@supp.cpr.itg.telecom.com.au
1.3:
updated patch from lukem@supp.cpr.itg.telecom.com.au
to also make -r and -R work again
1.5:
mktemp open & fdopen
1.8:
/tmp// -> /tmp/
1.10:
Fix strncpy usage and correct strncat length field,
from Theo. Also change some occurrence of MAXPATHLEN
with sizeof(foo).
1.11:
does noone know how to use strncat correctly?
1.12:
use mkstemp()
From NetBSD:
Use open rather than create so we can specify
exclusive open mode.
main.c:
From OpenBSD 1.2, 1.5
1.2:
From NetBSD: support $TAPE.
1.5
Set umask to be read only by owner until we set real
file permissions.
tape.c:
From NetBSD:
Use open rather than create so we can specify
exclusive open mode.
refer the reader to the detailed information in section 5,
remove the mount_* man pages for those file system. mount_std(8)
to cover all of the file systems it is currently being used
to mount.
mount_{devfs, fdesc, kernfs, procfs}.8 are now
MLINKS to mount_std.
some MD5 fixes, better tracing, configurable redirect processing,
and a fix to split-horizon/poisoned-reverse treatment.
Submitted by: Vernon J. Schryver <vjs@mica.denver.sgi.com>
do it themselves. (Some of these programs actually depended on this
beyond compiling the definition of struct ifinfo!) Also fix up some
other #include messes while we're at it.
Simplified average calculations. This also fixes potential overflow errors
and minor rounding inconsistencies (always round to nearest now).
Don't lose more SIGINFOs than necessary.
Print \r at the start of the status message. This clears the dots that
are sometimes left by ping -f.
Reviewed by: sef
the sd & od drivers. There is also slight changes to fdisk & newfs
in order to comply with different sectorsizes.
Currently sectors of size 512, 1024 & 2048 are supported, the only
restriction beeing in fdisk, which hunts for the sectorsize of
the device.
This is based on patches to od.c and the other system files by
John Gumb & Barry Scott, minor changes and the sd.c patches by
me.
There also exist some patches for the msdos filesys code, but I
havn't been able to test those (yet).
John Gumb (john@talisker.demon.co.uk)
Barry Scott (barry@scottb.demon.co.uk)
- Don't link against libkvm and don't uselessly include <kvm.h>.
- Declare constant objects as const.
- Declare functions with the correct types.
- Call functions with the correct parameters.
Not fixed:
- The sysctl parsing remains ugly (but it may be the best we can do).
- atnetrange() should use strtoul() rather than sscanf() for better
error checking.
that is stored in the hints file. If that search path contained
a non-existent directory (one, say, that had been removed), and
"ldconfig -m /a/perfectly/good/directory" was run, ldconfig returned
an error status without printing an error message. This caused
some confusing bombs when installing ports, in particular.
I changed it so that non-existent directories from the stored search
path are silently ignored. Only non-existent directories named
explicitly on the command line are treated as errors. Also, a
diagnostic is printed if and only if an error status is returned.
In an unrelated fix, ldconfig now silently ignores any directories
named on the command line when the "-r" option is given. Formerly,
these directories incorrectly made their way into the "search
directories" line of the listing. It really should be an error to
specify directories together with "-r", but I don't have time to
fix the manual page in that way right now.
2.2 Candidate.
utility for front-ending its operation more of a possibility.
2.2-RELEASE candiate. Closes PR#1960
Submitted-By: Darryl Okahata <darrylo@hpnmhjw.sr.hp.com>
setsockopt()'s on a -1 file descriptor.
Remove attempt to decrease TCP MSS; it makes no sense.
Set the IP TOS to IPTOS_THROUGHPUT as an indication that this is an
application sending large blocks of data, as recommended by RFC1700.
Opening the socket is the only privileged operation route requires.
Make a couple of static buffers bigger, and use strncpy() and snprintf() where
there's a chance of overflow.
Fixes PR bin/1903
Partially Submitted by: Ollivier Robert <roberto@keltia.freenix.fr>
Don't look up the network number if we're being asked to add a host route.
Fixes PR bin/1900
Submitted by: Bruce A. Mah <bmah@cs.berkeley.edu> (pr bin/1900)
but Bill has beaten me on this. ;-)
However, he missed the part to compute the kernelsize in kilobytes,
so the minfree consideration was now overcautious. (I've also
changed the return type of dump_size() to void since int was useless.)
Being here, the fact that `vmcore' was written world-readable was just
a plain security hole: everybody who was able to crash a kernel could
later read any confidential information out of it at his will. Create
it with umask 077 instead.
of the partition. Only if the size is 0 should the
special handling of 0 as first argument be triggered.
[This bug caused offset 0 to give C/H/S = 0/0/0 instead of 0/0/1.]
The init_sector0 function needs to decrease the first argument
to the second call to dos() by one to be consistent with the
calls to dos() in change_part().
[This bug caused fdisk -i to create bogus partition tables with
the ending C/H/S value 1 too high. This usually gives S = 1
instead of S = maximum, so the geometry guessing in the slice
code and perhaps in SCSI BIOSes was defeated.]
Submitted by: Tor Egge <tegge@itea.ntnu.no>
- make minfree work by getting the dump size before checking to see
if the dump will fit on the filesystem
- also fail to dump if no minfree is specified but there are not enough
free blocks.
Fix a typo in the man page.
Fixes PR bin/1322
Submitted by: "Philippe C." <charnier@lirmm.fr>
ldconfig path (from NetBSD). I added code to make sure there were no
duplicates in the path when multiple ldconfig -m's were used.
Reviewed by: nate, jdp
Obtained from: NetBSD (partly)
by sysctl and never can be in their documented form (kern.name_max would
have to become fs.filesystemname.name_max, etc.).
Added missing references to user.stream_max and user.tzname_max. These
seem to misnamed. <sys/sysconf.h> says that they correspond to POSIX2
names, but the sysconf names don't have POSIX2 or "posix2" like all the
other POSIX2 names.
in order to create sparse directory files that caused a panic of a
filesystem where fsck would not find anything. A fix for fsck is in the
make but still has to be reviewed by Kirk McKusick.
Fixed the following bugs:
- the buffer was reprinted endlessly when msg.bufx == 0 and (for a
different reason) when msg.bufx == 1.
- the last byte of the buffer wasn't printed except in the the infinite
loop cases.
- the comment about walking the buffer didn't match the (correct) code.
- minor -Wall and style bugs.
Not fixed:
- excessive newline processing which hid the non-printing of the last
byte of the buffer.
for gcc >= 2.5 and no-ops for gcc >= 2.6. Converted to use __dead2
or __pure2 where it wasn't already done, except in math.h where use
of __pure was mostly wrong.
it stopped us from removing or setting loopback address
on lo0:
also make use of the fact the athe sockaddre_at struct now has a "netrange"
field.
CVS ----------------------------------------------------------------------
the file access time update on reads and can be useful in reducing
filesystem overhead in cases where the access time is not important (like
Usenet news spools).
firewalls are remote, and this command will kill the network connection
to them), prompt the user for confirmation of this command.
Also, add the '-f' flag which ignores the need for confirmation the
command, and if there is no controlling tty (isatty(STDIN_FILENO) !=0)
assume '-f'.
If anyone is using ipfw flush in scripts it shouldn't affect them, but you
may want to change the script to use a 'ipfw -f flush'.
Reviewed by: alex
hostname/IP twice on same line in /etc/exports' fix from dumping core
due to bogus /etc/exports entries.
Submitted by: Toshihiro Kanda <candy@fct.kgc.co.jp>
Turn this behavior off using '-Q'. This makes '-v' useless other than as
an ICMP-sniffer, which tcpdump is better at anyway.
Print out another couple of ICMP messages, and fix the printing of the
original packet (mostly byte order problems).
now completely consistent across all IP protocols and should be quite a
bit faster.
Use getprotoname() extensively, performed minor cleanups of admin utility.
The admin utility could use a good kick in the pants.
Basicly, these were the minimal changes I could make to the code
to get it up to tollerable shape. There will be some future commits
to clean up the basic architecture of the firewall code, and if
I'm feeling ambitious, I may pull in changes like NAT from Linux
and make the firewall hooks comletely generic so that a user can
either load the ipfw module or the ipfilter module (cf Darren Reed).
Discussed with: fenner & alex
Submitted by: archie@whistle.com
This patch allows true interface routing to be controlled
from the command line..
you can now do:
route add default -interface ppp0
even if you have no clue what the address at the other end is..
this is part of a set of changes that allow true "unnumbered links"
such as netcom run between their sites..
In practice you should assign the address from one of your ethernet
interfaces to the local side of the P2P link so that IP doesn't
say that the packet comes from 255.255.255.255, but
there is no need whatsoever to assign an address of any kind
to the remote end of the link.. useful for frame relay links etc also.
Note, this is not really a security risk, because the buffer in question
is a static variable in the data segment and not on the stack, and hence
cannot subert the flow of execution in any way. About the worst case was
that if you pinged a long hostname, ping could coredump.
Pointed out on: bugtraq (listserv@netspace.org)
the obsolete() function to convert dump-style args to getopt-style
args doesn't check to see that 'f' really has an argument following
the option string in argv[1].
Submitted-By: jmacd
inspired by SunOS version of mount which uses option -p to
indicate that the mount information should be printed in fstab
format.
This is a neat way to create a new fstab file to use later when
one has modified the mount points or mount options or added or
removed mount some mount points. You just type
mount -p > /etc/fstab.new
and there is your new fstab file ready to be used though you
will of course have to add any necessary noauto flags manually.
[Committers note: This also seems to do the wrong thing for AMD
mounts, but in the more average case this is a nifty feature nonetheless
and one can always edit the bogus entries out]
Submitted-By: Jukka Ukkonen <jau@jau.csc.fi>
This stuff should not be too destructive if the IPDIVERT is not compiled in..
be aware that this changes the size of the ip_fw struct
so ipfw needs to be recompiled to use it.. more changes coming to clean this up.
control program to control the facility of the bootblocks
to fetch a default bootstring from a fixed location on the disk.
See the manpage for more info.
Prevent ALL protocol from being used with port specifications.
Allow 'via' keyword at any point in the options list. Disallow
multiple 'via' specifications.
of /0 to have the desired effect. Normalize IP addresses that
won't match a given mask (i.e. 1.2.3.4/24 becomes 1.2.3.0/24).
Submitted by R. Bezuidenhout <rbezuide@mikom.csir.co.za>
Code formatting and "frag" display fixes.
if statements, #if 0 some unused code, use off_t in calls to read/
write_disk, fix a printf format, remove unused variables, and
#include necessary files.
disklabel(8) to the kernel (dsopen()). Drivers should initialize the
hardware values (rpm, interleave, skews). Drivers currently don't do
this, but it usually doesn't matter since rotational position stuff is
normally disabled.
- Filter based on ICMP types.
- Accept interface wildcards (e.g. ppp*).
- Resolve service names with the -N option.
- Accept host names in 'from' and 'to' specifications
- Display chain entry time stamps with the -t option.
- Added URG to tcpflags.
- Print usage if an unknown tcpflag is used.
- Ability to zero individual accounting entries.
- Clarify usage of port ranges.
- Misc code cleanup.
Closes PRs: 1193, 1220, and 1266.
This covers the security problem descibed in SA-96:10 and Jeff says that
when we upgrade to Lite2 (which fixes this problem), mount no longer needs
to be setuid, so we'll never be going back.
Submitted by: hsu
Reviewed by: pst
mount_* programs. While we're at it, collapse the four now-identical
mount programs for devfs, fdesc, kernfs, and procfs into links to
a new mount_std(8) which can mount any really generic filesystem
such as these when called with the appropriate argv[0].
Also, convert the mount programs to use sysexits.h.
Subject: Fix for annoying fsck bug
Date: Wed, 24 Jan 1996 13:33:29 -0700 (MST)
The following small diff fixes the annoying fsck bug that causes it to
need to be run twice to end up with correct reference counts for inodes
for directories that had subdirectories relocated into the lost+found
directory.
I found the need to rerun *extremely* annoying. This fix causes the
count to be correctly adjusted later in pass 4 by correctly stating
the parent reference count.
Note that the parent reference count is incremented when the directory
entry is made (for ".."), but is not really there in the case of a
directory that does not make an entry in its parent dir.
This can be tested by waiting for the inode sync after cd'ing from a
shell into a test fs. Then you "mkdir xxx yyy zzz", wait a second,
and hit the machine reset button.
Reviewed by: nate (Tested lots of crashes :)
Submitted by: Terry Lambert <terry@lambert.org>
