other "system" header files.
Also help the deprecation of lockmgr.h by making it a sub-include of
sys/lock.h and removing sys/lockmgr.h form kernel .c files.
Sort sys/*.h includes where possible in affected files.
OK'ed by: bde (with reservations)
could not compress into clusters. This could result in lots of
wasted clusters while recieving small packets from an interface
that uses clusters for all it's packets.
Patch is partially from BSDi (limiting the size of the copy) and
based on a patch for 4.1 by Ian Dowse <iedowse@maths.tcd.ie> and
myself.
Reviewed by: bmilekic
Obtained From: BSDi
Submitted by: iedowse
chgsbsize(), which are called rather frequently and may be called from an
interrupt context in the case of chgsbsize(). Instead, do the hash table
lookup and maintenance when credentials are changed, which is a lot less
frequent. Add pointers to the uidinfo structures to the ucred and pcred
structures for fast access. Pass a pointer to the credential to chgproccnt()
and chgsbsize() instead of passing the uid. Add a reference count to the
uidinfo structure and use it to decide when to free the structure rather
than freeing the structure when the resource consumption drops to zero.
Move the resource tracking code from kern_proc.c to kern_resource.c. Move
some duplicate code sequences in kern_prot.c to separate helper functions.
Change KASSERTs in this code to unconditional tests and calls to panic().
the chgsbsize() call to use a "subject" pointer (&sb.sb_hiwat) and
a u_long target to set it to. The whole thing is splnet().
This fixes a problem that jdp has been able to provoke.
1) while allocating a uidinfo struct malloc is called with M_WAITOK,
it's possible that while asleep another process by the same user
could have woken up earlier and inserted an entry into the uid
hash table. Having redundant entries causes inconsistancies that
we can't handle.
fix: do a non-waiting malloc, and if that fails then do a blocking
malloc, after waking up check that no one else has inserted an entry
for us already.
2) Because many checks for sbsize were done as "test then set" in a non
atomic manner it was possible to exceed the limits put up via races.
fix: instead of querying the count then setting, we just attempt to
set the count and leave it up to the function to return success or
failure.
3) The uidinfo code was inlining and repeating, lookups and insertions
and deletions needed to be in their own functions for clarity.
Reviewed by: green
accept filters are now loadable as well as able to be compiled into
the kernel.
two accept filters are provided, one that returns sockets when data
arrives the other when an http request is completed (doesn't work
with 0.9 requests)
Reviewed by: jmg
until the incoming connection has either data waiting or what looks like a
HTTP request header already in the socketbuffer. This ought to reduce
the context switch time and overhead for processing requests.
The initial idea and code for HTTPACCEPT came from Yahoo engineers and has
been cleaned up and a more lightweight DELAYACCEPT for non-http servers
has been added
Reviewed by: silence on hackers.
Now this check is necessary because IPv6 source routing might use
control data bigger than MLEN. (e.g. 16bytes IPv6 addr x 23 hops)
Actually mbuf cluster should be used in uipc_socket.c:sbcreatecontrol()
and uipc_syscalls.c:sockargs() when data size is bigger then MLEN,
and such patches were already in KAME environment and have been
confirmed to work well. I just forgot to merge them into 4.0, sorry.
For safety, I'll postpone such patches until after 4.0 release.
The effect of postponement is followings.
-Ping6 source routing hops are limitted to around 6 or so.
-If some apps do setsockopt IPV6_RTHDR and try to receive
incoming IPv6 source routing info, it can't receive more
than 6 hops source routing info.
(But currently, no apps seems to be doing it.)
Approved by: jkh
Make gratuitous style(9) fixes (me, not the submitter) to make the aio
code more readable.
PR: kern/12053
Submitted by: Chris Sedore <cmsedore@maxwell.syr.edu>
an empty mbuf to stay in the queue, then causing a needless panic
because sb_cc == 0 and sb_mbcnt != 0.
But we still need to panic rather than endlessly looping if, for
some reason, sb_cc == 0 and there are non-empty mbufs in the queue.
PR: kern/11988
Reviewed by: fenner
Make a sonewconn3() which takes an extra argument (proc) so new sockets created
with sonewconn() from a user's system call get the correct credentials, not
just the parent's credentials.
into uipc_mbuf.c. This reduces three sets of identical tunable code to
one set, and puts the initialisation with the mbuf code proper.
Make NMBUFs tunable as well.
Move the nmbclusters sysctl here as well.
Move the initialisation of maxsockets from param.c to uipc_socket2.c,
next to its corresponding sysctl.
Use the new tunable macros for the kern.vm.kmem.size tunable (this should have
been in a separate commit, whoops).
This is the change to struct sockets that gets rid of so_uid and replaces
it with a much more useful struct pcred *so_cred. This is here to be able
to do socket-level credential checks (i.e. IPFW uid/gid support, to be added
to HEAD soon). Along with this comes an update to pidentd which greatly
simplifies the code necessary to get a uid from a socket. Soon to come:
a sysctl() interface to finding individual sockets' credentials.
where select(2) can return that a listening socket has a connected socket
queued, the connection is broken, and the user calls accept(2), which then
blocks because there are no connections queued.
Reviewed by: wollman
Obtained from: NetBSD
(ftp://ftp.NetBSD.ORG/pub/NetBSD/misc/security/patches/19990120-accept)
from an interrupt context and fsetown() wants to peek at curproc, call
malloc(..., M_WAITOK), and fiddle with various unprotected data structures.
The fix is to move the code that duplicates the F_SETOWN/FIOSETOWN state
of the original socket to the new socket from sonewconn() to accept1(),
since accept1() runs in the correct context. Deferring this until the
process calls accept() is harmless since the process can't do anything
useful with SIGIO on the new socket until it has the descriptor for that
socket.
One could make the case for not bothering to duplicate the
F_SETOWN/FIOSETOWN state and requiring the process to explicitly make the
fcntl() or ioctl() call on the new socket, but this would be incompatible
with the previous implementation and might break programs which rely on
the old semantics.
This bug was discovered by Andrew Gallatin <gallatin@cs.duke.edu>.
by bde, a few other tweaks to get the patch to apply cleanly again and
some improvements to the comments.
This change closes some fairly minor security holes associated with
F_SETOWN, fixes a few bugs, and removes some limitations that F_SETOWN
had on tty devices. For more details, see the description on the PR.
Because this patch increases the size of the proc and pgrp structures,
it is necessary to re-install the includes and recompile libkvm,
the vinum lkm, fstat, gcore, gdb, ipfilter, ps, top, and w.
PR: kern/7899
Reviewed by: bde, elvind
Also fix data types and printf formats while I'm here.
PR: misc/8494
Panic instead of looping forever in sbflush(). If sb_mbcnt counts
more mbufs than sb_cc counts bytes, the original code can turn into an
infinite loop of removing 0 bytes from the socket buffer until it's empty.
FreeBSD/alpha. The most significant item is to change the command
argument to ioctl functions from int to u_long. This change brings us
inline with various other BSD versions. Driver writers may like to
use (__FreeBSD_version == 300003) to detect this change.
The prototype FreeBSD/alpha machdep will follow in a couple of days
time.
Define a parameter which indicates the maximum number of sockets in a
system, and use this to size the zone allocators used for sockets and
for certain PCBs.
Convert PF_LOCAL PCB structures to be type-stable and add a version number.
Define an external format for infomation about socket structures and use
it in several places.
Define a mechanism to get all PF_LOCAL and PF_INET PCB lists through
sysctl(3) without blocking network interrupts for an unreasonable
length of time. This probably still has some bugs and/or race
conditions, but it seems to work well enough on my machines.
It is now possible for `netstat' to get almost all of its information
via the sysctl(3) interface rather than reading kmem (changes to follow).
* Figure out UTC relative to boottime. Four new functions provide
time relative to boottime.
* move "runtime" into struct proc. This helps fix the calcru()
problem in SMP.
* kill mono_time.
* add timespec{add|sub|cmp} macros to time.h. (XXX: These may change!)
* nanosleep, select & poll takes long sleeps one day at a time
Reviewed by: bde
Tested by: ache and others
declaration macros so that a semicolon can be added when the macros
are invoked without giving a (pedantic) syntax error. Invocations
need to be followed by a semicolon so that programs like indent and
gtags don't get confused.
Fixed the one invocation that wasn't followed by a trailing semicolon.
since that might cause in_pcballoc to call MALLOC with M_WAITOK during
a software interrupt.
Reviewed by: Garrett Wollman <wollman@khavrinen.lcs.mit.edu>
socket addresses in mbufs. (Socket buffers are the one exception.) A number
of kernel APIs needed to get fixed in order to make this happen. Also,
fix three protocol families which kept PCBs in mbufs to not malloc them
instead. Delete some old compatibility cruft while we're at it, and add
some new routines in the in_cksum family.
switch. I needed 'LINT' to compile for other reasons so I kinda got the
blood on my hands. Note: I don't know how to test this, I don't know if
it works correctly.
This commit includes the following changes:
1) Old-style (pr_usrreq()) protocols are no longer supported, the compatibility
glue for them is deleted, and the kernel will panic on boot if any are compiled
in.
2) Certain protocol entry points are modified to take a process structure,
so they they can easily tell whether or not it is possible to sleep, and
also to access credentials.
3) SS_PRIV is no more, and with it goes the SO_PRIVSTATE setsockopt()
call. Protocols should use the process pointer they are now passed.
4) The PF_LOCAL and PF_ROUTE families have been updated to use the new
style, as has the `raw' skeleton family.
5) PF_LOCAL sockets now obey the process's umask when creating a socket
in the filesystem.
As a result, LINT is now broken. I'm hoping that some enterprising hacker
with a bit more time will either make the broken bits work (should be
easy for netipx) or dike them out.
to removing the connection from the queue. The problem here is that
falloc() may block and this would allow another process to accept the
connection instead. If this happens to leave the queue empty, then the
system will panic with an "accept: nothing queued".
Also changed a wakeup() to a wakeup_one() to avoid the "thundering herd"
problem on new connections in Apache (or any other application that has
multiple processes blocked in accept() for the same socket).
all of the configurables and instrumentation related to
inter-process communication mechanisms. Some variables,
like mbuf statistics, are instrumented here for the first
time.
For mbuf statistics: also keep track of m_copym() and
m_pullup() failures, and provide for the user's inspection
the compiled-in values of MSIZE, MHLEN, MCLBYTES, and MINCLSIZE.
sb_max * MCLBYTES / (MSIZE + MCLBYTES)
used in sbreserve() to overflow, causing all socket creation attempts
to fail. Force the calculation to use u_quad_t's, which makes overflow
less likely.
This will make a number of things easier in the future, as well as (finally!)
avoiding the Id-smashing problem which has plagued developers for so long.
Boy, I'm glad we're not using sup anymore. This update would have been
insane otherwise.
