Replace all in-tree uses with <sys/mouse.h> which repo-copied a few
moments ago from src/sys/i386/include/mouse.h by peter.
This is also the appropriate fix for exo-tree sources.
Put warnings in <machine/mouse.h> to discourage use.
November 15th 2000 the warnings will be converted to errors.
January 15th 2001 the <machine/mouse.h> files will be removed.
Replace all in-tree uses with necessary subset of <sys/{fb,kb,cons}io.h>.
This is also the appropriate fix for exo-tree sources.
Put warnings in <machine/console.h> to discourage use.
November 15th 2000 the warnings will be converted to errors.
January 15th 2001 the <machine/console.h> files will be removed.
Approved by: jkh
Write kern_securelevel_enable variable to rc.conf if user selects
medium or low security in sysinstall. This overrides the case where a
user selects fascist security and then tries to go back to a lower
setting.
of the Am79c973 with "AlertIT Technology," whatever that is. Also mention
support for the PCnet/FAST III cards in the documentation. The
PCnet/FAST III chips have integrated 10/100 PHYs.
a default. This should prevent people from whacking return at
the Distributions menu and getting nothing selected as a result
(a minimal "standard" system will at least install).
Flagged as big tech support headache by: Chris Shumway <cshumway@osd.bsdi.com>
support which use National Semiconductor DP8393X (SONIC) as ethernet
controller. Currently, this driver is used on only PC-98.
Submitted by: Motomichi Matsuzaki <mzaki@e-mail.ne.jp>
Obtained from: NetBSD/pc98
appropriate(?) defaults for "low", "medium" and "high" security
environments. Medium is basically what we currently have with a little
seat-belt tightening where it made sense. Low is the same as medium but
without the tightening. High is positively fascist with nothing turned
on by default and an automatic call to 911 if it can find a modem.
really doesn't make any sense, what was I smoking) and allow
the more canonical usage of "any" for either side of the comparison
for release name or architecture (meaning you can also set CD_VERSION=any
in a cdrom.inf file to cause sysinstall to always match it and likewise
with the architecture, if specified).
Sensibly suggested by: Makoto MATSUSHITA <matusita@jp.FreeBSD.org>
Previously, these cards were supported by the lnc driver (and they
still are, but the pcn driver will claim them first), which is fine
except the lnc driver runs them in 16-bit LANCE compatibility mode.
The pcn driver runs these chips in 32-bit mode and uses the RX alignment
feature to achieve zero-copy receive. (Which puts it in the same
class as the xl, fxp and tl chipsets.) This driver is also MI, so it
will work on the x86 and alpha platforms. (The lnc driver is still
needed to support non-PCI cards. At some point, I'll need to newbusify
it so that it too will me MI.)
The Am79c978 HomePNA adapter is also supported.
configure FreeBSD so that various databases such as passwd and group can be
looked up using flat files, NIS, or Hesiod.
= Hesiod has been added to libc (see hesiod(3)).
= A library routine for parsing nsswitch.conf and invoking callback
functions as specified has been added to libc (see nsdispatch(3)).
= The following C library functions have been modified to use nsdispatch:
. getgrent, getgrnam, getgrgid
. getpwent, getpwnam, getpwuid
. getusershell
. getaddrinfo
. gethostbyname, gethostbyname2, gethostbyaddr
. getnetbyname, getnetbyaddr
. getipnodebyname, getipnodebyaddr, getnodebyname, getnodebyaddr
= host.conf has been removed from src/etc. rc.network has been modified
to warn that host.conf is no longer used at boot time. In addition, if
there is a host.conf but no nsswitch.conf, the latter is created at boot
time from the former.
Obtained from: NetBSD
on Alpha, primarily in the storage adapter area. Things like
Soundblaster-attached CDs, WD7000 etc for example. Try to get RELNOTES
for alpha to reflect reality a bit more.
When we use PC-Card as install media, it is a patch
to tell with beep about whether we were able to
recognize it well.
Reviewed by: jkh, imp
Tested by: Kenji Yamada <kyamada@ISI.EDU>
alpha: tap driver, accept_filters, ata support for ATA100,
routed update to 2.22, truncate(1), syslogd(8) -n option, kenv(1),
periodic(8) controlled by periodic.conf, logger(1) support for
remote syslogs.
i386: tap driver, accept_filters, ata support for ATA100,
routed update to 2.22, truncate(1), syslogd(8) -n option, kenv(1),
periodic(8) controlled by periodic.conf, boot98cfg(8),
logger(1) support for remote syslogs.
PR: 20628
Submitted by: bmah@cisco.com (Bruce A. Mah)
Reviewed by: nik
Beyond changes to the build system, this includes fixing up the sample
freebsd.mc configuration for changes in defaults and syntax, removing
outdated documentation, and updating the release notes.
Make sysinstall override this on install, so the effective behavioural
change for a newly installed system is null. Overall, this makes a system
with an empty /etc/rc.conf not run any network services, and makes the
FreeBSD-provided network services that are running visible in /etc/rc.conf
(instead of making people look through /etc/defaults/rc.conf to find the
things they need to disable to secure the system.)
Reviewed by: jhb
Discussed with: The usual cabal
3.3.6 base distribution, some of the packing lists needed hacking so that
they would pack up everything in the right place. As a result, go ahead and
just add a directory for the packing lists. These are the i386 packing lists.
corresponding tarball from it. It uses the packing list name to determine
the tarball name. If the tarball name ends in 'gz', it will be gzipped, if
it ends in 'bz', it will be bzip2'd.
XFree86 3.3.6 into a scratch directory. The patch file patches the XFree86
port to not ask any questions and to actually be able to install some things
like the i810 server link kit bits. If you want XF86Setup to build, you
should have tk80 (not tk82) installed. If you want to XF86Setup_jp to build
you need to have ja-tk80 installed.
Now, if a release is specified, instead of just looking for a directory
with the same name as the release, try several possible directories (each
suffixed with the release name) relative to the base directory including
".", "releases/MACHINE", "snapshots/MACHINE", and each of those prefixed
with "pub/FreeBSD/". This will allow us to remove the evil symlinks under
pub/FreeBSD/releases/MACHINE/ to the snapshots on the ftp site.
does bad things to /etc/make.conf in certain situations. Also
soften the "don't install crypto from the USA!" messages since,
except for RSA (which is still noted), that's not so true anymore.
build process in too many cases. Adding mtree to bootstrap-tools
to solve this breaks the upgrade path because mtree needs a
libc that has strtofflags and fflagstostr.
kernel config file.
- Add WORLD_FLAGS and KERNEL_FLAGS so you can build world and kernel with
extra make options such as -jX to speed up release builds.
- When building kernels, allow their hints to tag along, and use this to
install hints onto the boot floppy. Since the boot floppy doesn't load
loader.4th, we have to change device.hints to strip comments and change
each line to an explicit set command.
