1
0
mirror of https://git.FreeBSD.org/src.git synced 2024-12-23 11:18:54 +00:00
Commit Graph

9015 Commits

Author SHA1 Message Date
Søren Schmidt
0c4b980607 Fix ATA_DEBUG case breakage. 2003-03-30 09:27:59 +00:00
Matthew N. Dodd
d938c3689d Revert 1.21; this was local code that should not have been
committed.
2003-03-30 08:13:47 +00:00
Jake Burkholder
a271c2ed7f - Temporary fix so this compiles with 64 bit bus_addr_t.
Sponsored by:	DARPA, Network Associates Laboratories
Approved by:	scottl
2003-03-30 05:26:01 +00:00
Matthew N. Dodd
672fc9ebf6 - Free interrupt handler in ep_free().
- Move ep_pccard_detach() to if_ep.c and rename to ep_detach()
- Specify detach methods for all bus frontends.
2003-03-29 22:27:41 +00:00
Poul-Henning Kamp
67ffbc63f3 remove a blank line. 2003-03-29 22:13:32 +00:00
Matthew N. Dodd
18e03d5e08 Checksum the configuration EEPROM. 2003-03-29 21:57:32 +00:00
Matthew N. Dodd
bb25efadc4 - Return error status instead of value in get_e().
- Modify ep_get_macaddr() to return an error status.
- Reverse the return value logic of eeprom_rdy().
2003-03-29 21:44:46 +00:00
Mike Silbersack
63b9b38eb8 Switch vr_encap over to using m_defrag instead of its own version
of the function.

No functional change, this driver already handled long mbuf chains
correctly.

MFC after:	2 weeks
2003-03-29 21:39:49 +00:00
Mike Silbersack
cda97c506e Update if_dc to use m_defrag, removing the semi-duplicate dc_coal
function.

Also, use m_defrag where appropriate to defrag long mbuf chains
in the same fashion as was done in if_sis.c.  Before this change,
if_dc would blow up and take down the interface if fed a really long
mbuf chain.

MFC after:	2 weeks
2003-03-29 21:27:07 +00:00
Matthew N. Dodd
370f7f7c05 - Deal with netisr changes.
- Wrap idt_atm_harpconn() in conditional define T_ATM_BUFQUEUE
2003-03-29 15:55:04 +00:00
Matthew N. Dodd
20fae1ba5b - Declare ex_devclass in if_ex.c
- Rename module datastructures in if_ex_isa.c to be more standard.
2003-03-29 15:38:53 +00:00
Matthew N. Dodd
c0a71ab74a - Move ex_pccard_detach() to if_ex.c and rename it to ex_detach().
- Add detach method to ISA front end.
2003-03-29 15:34:26 +00:00
Matthew N. Dodd
ece0c30b62 Reformat for readability. 2003-03-29 15:33:04 +00:00
Matthew N. Dodd
dfcf25920b Remove useless code. 2003-03-29 14:51:50 +00:00
Matthew N. Dodd
21e2098cc9 Don't compile the identify method yet. 2003-03-29 14:50:14 +00:00
Matthew N. Dodd
b26809608c Register dependency on the elink module. 2003-03-29 13:45:17 +00:00
Søren Schmidt
566cf07a7c Second round of updates to the ATA driver.
Clean up the DMA interface too much unneeded stuff crept in with
the busdma code back when.

Modify the ATA_IN* / ATA_OUT* macros so that resource and offset
are gotten from a table. That allows for new chipsets that doesn't
nessesarily have things ordered the good old way. This also removes
the need for the wierd PC98 resource functions.

Tested on: i386, PC98, Alpha, Sparc64
2003-03-29 13:37:09 +00:00
Matthew N. Dodd
50e960d918 - Move driver to newbus.
- Provide identify methods for EtherExpress and 3c507 cards; this
  means these cards no longer need wired configs.
- Provide a detach method.
2003-03-29 13:36:41 +00:00
Matthew N. Dodd
d0859c8567 Clear the IFF_OACTIVE flag at the end of ieinit(). This prevents
the adapter from becoming wedged when when the interface is
is brought up by ether_ioctl() (when you set an IP address for example.)

Confirmed this "fix" from NetBSD's i82586 backend.  It seems hackish
to me but whatever.
2003-03-29 12:42:01 +00:00
Matthew N. Dodd
14b2046d29 Adjust shared memory allocation to work on cards with only 8 KB of RAM. 2003-03-29 09:49:22 +00:00
Matthew N. Dodd
563d4d8656 Clean up argument comments for bus_dma_tag_create() calls. 2003-03-29 09:46:10 +00:00
Matthew N. Dodd
4ada039b14 - Track resources in our softc.
- Sanitize dpt_alloc().
- Add helper functions for resource alloc/release.
- Add detach method.
- Relocate definition of devclass_t.
- Move some debugging output behind bootverbose.
- Implement an identify method for ISA devices
  but don't use it right now.
2003-03-29 08:30:45 +00:00
Matthew N. Dodd
d1b27132c9 Text formatting changes. 2003-03-29 01:53:13 +00:00
Matthew N. Dodd
c040a3e16e Don't panic if we aren't plugged into a hub. 2003-03-29 01:40:42 +00:00
Orion Hodson
6084370fe4 Perform warm reset if codec reports ready on attach.
Move AC97 link control power up poke so it is always performed on attach.
2003-03-28 16:33:15 +00:00
Warner Losh
129edde443 pccarddevs_data.h no longer generated 2003-03-28 06:44:57 +00:00
Warner Losh
2983138955 MFp4:
Don't generate the data file.
Use 0xffffffff rather than -1 for sign safety as these fields are uint32_t.
2003-03-28 06:43:50 +00:00
Matthew N. Dodd
0e91b7d532 - Clean up function calling conventions.
- Be consistent about what we call our softc.
- Minor formatting.
- Add some register definitions gleaned from NetBSD/Linux.
2003-03-28 06:27:08 +00:00
Matthew N. Dodd
c591e5ebee Multicast support, gleaned from NetBSD's if_iy driver.
Submitted by:	 Craig Boston <craig@xfoil.gank.org>
2003-03-28 02:15:01 +00:00
Matthew N. Dodd
aa5d693129 - Rely on ether_ifattach() to initialize part of our struct ifnet
rather than doing it ourself.
- Set ifq_maxlen.
- Include the size of the ethernet header when we allocate
  our mbuf chain in ieget().
2003-03-27 20:38:00 +00:00
Søren Schmidt
c7f547fde8 Biofinish the request if we cannot malloc in ad_start. 2003-03-27 10:48:21 +00:00
Poul-Henning Kamp
83e13864c3 Allocate the toplevel indir with M_WAITOK to avoid complicating things
needlessly.

Detected by:	rwatsons EvilMalloc(9)
2003-03-27 10:14:36 +00:00
Matthew N. Dodd
618095ccef Catch up with recent events. 2003-03-27 07:37:02 +00:00
Matthew N. Dodd
7736233b36 Add missing COMPAT_ISA_DRIVER().
Oops.
2003-03-27 05:40:40 +00:00
Scott Long
a6d35632f5 Begin support for 64-bit address support and workarounds for newer cards:
- Add data structuress for doing 64-bit scatter/gather
	- Move busdma tag creations around so that only the parent is
	  created in aac_pci.c.
	- Retrieve the capabilities word from the firmware before setting
	  up command structures and tags. This allows the driver to decide
	  whether to do 64-bit commands, and if work-arounds are needed for
	  systems with >2GB of RAM.
	- Only enable the SCSI passthrough if it's enabled in the capabilities
	  word in the firmware.

This should fix problems with the 2120S and 2200S cards in systems with more
than 2GB of RAM.  Full 64-bit support is forthcoming.

MFC-After:	1 week
2003-03-26 17:50:11 +00:00
Orion Hodson
abe88fc972 Re-work ac97 initialization to match cold reset described in AC97r.23
and be prepared to wait much longer for codec to become ready.

Credit to Hugo D. Valentim <hvalentim@gmx.net> for reporting the
problem, providing useful pointers, and repeated diff testing.
2003-03-26 06:11:36 +00:00
Orion Hodson
8f832fd0ba For the VIA8233A use multi-sgd register set for primary playback
channel and disable DXS3.  Several users have reported DXS3 as playing
at half speed on the 8233A revision of the chipset.  This implicitly
means no SPDIF for VIA8233A users.
2003-03-26 05:51:13 +00:00
Orion Hodson
78a248c1db Add defines for low power and second codec ready. 2003-03-26 05:35:38 +00:00
Scott Long
43dac090dc aic79xx.reg:
Correct default precompensation value for RevA hardware.
2003-03-25 22:16:27 +00:00
Nate Lawson
f8ee56571c Add code to implement two new USB quirk types: NO_INQUIRY and NO_INQUIRY_EVPD
The former fakes a valid response to an inquiry command.  (I am completely
blown away that there are devices which hang upon receiving inquiry).  The
latter returns "invalid request" to any inquiry commands with EVPD set.
NO_INQUIRY implies NO_INQUIRY_EVPD but not vice versa.  Both quirks have been
tested separately on my USB key although it didn't require either of them.

While I'm here, fix wildcarding so that any/all of vendor, product, revision
can be wildcarded.

Idea from:	Linux
MFC after:	2 weeks
2003-03-25 16:21:09 +00:00
Matt Jacob
3aa9119309 Add an explanatory comment about what operational modes in xfwopt are. 2003-03-25 07:02:45 +00:00
Jake Burkholder
07515f29ce Fix 2 vm_offset_t -> vm_paddr_t missed in previous commit.
Sponsored by:	DARPA, Network Associates Laboratories
2003-03-25 01:47:29 +00:00
Jake Burkholder
227f9a1c58 - Add vm_paddr_t, a physical address type. This is required for systems
where physical addresses larger than virtual addresses, such as i386s
  with PAE.
- Use this to represent physical addresses in the MI vm system and in the
  i386 pmap code.  This also changes the paddr parameter to d_mmap_t.
- Fix printf formats to handle physical addresses >4G in the i386 memory
  detection code, and due to kvtop returning vm_paddr_t instead of u_long.

Note that this is a name change only; vm_paddr_t is still the same as
vm_offset_t on all currently supported platforms.

Sponsored by:	DARPA, Network Associates Laboratories
Discussed with:	re, phk (cdevsw change)
2003-03-25 00:07:06 +00:00
Matthew N. Dodd
257427efe3 Retire sys/pc98/pc98/spkr.c 2003-03-24 21:01:54 +00:00
Poul-Henning Kamp
5d445dcb4e Change g_class initialization to sparse format. 2003-03-24 19:46:26 +00:00
Matthew N. Dodd
b7b5ae3edb Use repo-copied files in sys/i386/bios. 2003-03-24 19:14:46 +00:00
John Baldwin
c2fae87169 Don't call sysbeep() in sc_bell() if either duration or pitch is zero.
Otherwise sysbeep() makes an annoying clicking sound on some systems.
'kbdcontrol -b off' just sets the duration and pitch to zero, it doesn't
set the QUIET_BELL flag.

Tested by:	SorAlx <soralx@cydem.zp.ua>
PR:		misc/41772
MFC after:	1 week
2003-03-24 15:56:00 +00:00
Hidetoshi Shimokawa
f34e847dce - The payload of Write Request Quad must be network byte order. 2003-03-24 04:11:21 +00:00
Hidetoshi Shimokawa
73aa55ba0a - The payload of Write Request Quad and Read Response Quad must be
network byte order.
- Set ATRetries register after each bus reset because the value is 'undef'
	in OHCI spec.
2003-03-24 04:06:21 +00:00
Hidetoshi Shimokawa
a84fda13bb Safe PCI configuration.
- Clear PCIM_CMD_MWRICEN:
	some chips seem to have problem with write invalidate.
	clearing this bit fixes SBP timeout problem.

Tested by: Michael Reifenberger <Michael.Reifenberger@Plaut.de>

- Set PCIM_CMD_SERRESPEN and PCIM_CMD_PERRESPEN
- Moderate value for latency timer.
2003-03-24 03:47:36 +00:00