load of _l suffixed versions of various standard library functions that use
the global locale, making them take an explicit locale parameter. Also
adds support for per-thread locales. This work was funded by the FreeBSD
Foundation.
Please test any code you have that uses the C standard locale functions!
Reviewed by: das (gdtoa changes)
Approved by: dim (mentor)
{readline,history}.h are in /usr/include/edit so as to not conflict with
the GNU libreadline versions. To use the libedit readline(3) one should
add "-I/usr/include/edit" to their Makefile
(spelled "-I${DESTDIR}/${INCLUDEDIR}/edit" within the FreeBSD source tree).
* Enable its use in the BSD licensed utilities that support readline(3).
* To make it easier to sync libedit development with NetBSD, histedit.h
is moved into libedit's directory as history shows shown we keep merging
it into that location.
Obtained from: NetBSD
Sponsored by: Juniper Networks
Add new RAID GEOM class, that is going to replace ataraid(4) in supporting
various BIOS-based software RAIDs. Unlike ataraid(4) this implementation
does not depend on legacy ata(4) subsystem and can be used with any disk
drivers, including new CAM-based ones (ahci(4), siis(4), mvs(4), ata(4)
with `options ATA_CAM`). To make code more readable and extensible, this
implementation follows modular design, including core part and two sets
of modules, implementing support for different metadata formats and RAID
levels.
Support for such popular metadata formats is now implemented:
Intel, JMicron, NVIDIA, Promise (also used by AMD/ATI) and SiliconImage.
Such RAID levels are now supported:
RAID0, RAID1, RAID1E, RAID10, SINGLE, CONCAT.
For any all of these RAID levels and metadata formats this class supports
full cycle of volume operations: reading, writing, creation, deletion,
disk removal and insertion, rebuilding, dirty shutdown detection
and resynchronization, bad sector recovery, faulty disks tracking,
hot-spare disks. For Intel and Promise formats there is support multiple
volumes per disk set.
Look graid(8) manual page for additional details.
Co-authored by: imp
Sponsored by: Cisco Systems, Inc. and iXsystems, Inc.
setting. It can be built by setting the WITH_ICONV knob. While this
knob is unset, the library part, the binaries, the header file and
the metadata files will not be built or installed so it makes no impact
on the system if left turned off.
This work is based on the iconv implementation in NetBSD but a great
number of improvements and feature additions have been included:
- Some utilities have been added. There is a conversion table generator,
which can compare conversion tables to reference data generated by
GNU libiconv. This helps ensuring conversion compatibility.
- UTF-16 surrogate support and some endianness issues have been fixed.
- The rather chaotic Makefiles to build metadata have been refactored
and cleaned up, now it is easy to read and it is also easier to add
support for new encodings.
- A bunch of new encodings and encoding aliases have been added.
- Support for 1->2, 1->3 and 1->4 mappings, which is needed for
transliterating with flying accents as GNU does, like "u.
- Lots of warnings have been fixed, the major part of the code is
now WARNS=6 clean.
- New section 1 and section 5 manual pages have been added.
- Some GNU-specific calls have been implemented:
iconvlist(), iconvctl(), iconv_canonicalize(), iconv_open_into()
- Support for GNU's //IGNORE suffix has been added.
- The "-" argument for stdin is now recognized in iconv(1) as per POSIX.
- The Big5 conversion module has been fixed.
- The iconv.h header files is supposed to be compatible with the
GNU version, i.e. sources should build with base iconv.h and
GNU libiconv. It also includes a macro magic to deal with the
char ** and const char ** incompatibility.
- GNU compatibility: "" or "char" means the current local
encoding in use
- Various cleanups and style(9) fixes.
Approved by: delphij (mentor)
Obtained from: The NetBSD Project
Sponsored by: Google Summer of Code 2009
to amd64, i386, and pc98. The headers are installed to /usr/include/x86
during an installworld, and an 'x86' symlink is created for kernel builds
similar to 'machine' so that the headers can be included as <x86/foo.h>.
Reviewed by: imp
Erwin ran an exp-run with libcompat and <regexp.h> removed. It turns out
the regexp library is almost entirely unused. In fact, it looks like it
is sometimes used by accident. Because these function names clash with
libc's <regex.h>, some application use both <regex.h> and libcompat,
which means they link against the wrong regex library.
This commit removes the regexp library and reimplements re_comp() and
re_exec() using <regex.h>. It seems the grammar of the regular
expressions accepted by these functions is similar to POSIX EREs.
After this commit, 1 low-profile port will be broken, but the maintainer
already has a patch for it sitting in his mailbox.
Note that due to e.g. write throttling ('wdrain'), it can stall all the disk
I/O instead of just the device it's configured for. Using it for removable
media is therefore not a good idea.
Reviewed by: pjd (earlier version)
The utmpx interface is the standardized interface of the user accounting
database. The standard only defines a subset of the functions that were
present in System V-like systems.
I'd like to highlight some of the traits my implementation has:
- The standard allows the on-disk format to be different than the
in-memory representation (struct utmpx). Most operating systems don't
do this, but we do. This allows us to keep our ABI more stable, while
giving us the opportunity to modify the on-disk format. It also allows
us to use a common file format across different architectures (i.e.
byte ordering).
- Our implementation of pututxline() also updates wtmp and lastlog (now
called utx.log and utx.lastlogin). This means the databases are more
likely to be in sync.
- Care must be taken that our implementation discard any fields that are
not applicable. For example, our DEAD_PROCESS records do not hold a
TTY name. Just a time stamp, a record identifier and a process
identifier. It also guarantees that strings (ut_host, ut_line and
ut_user) are null terminated. ut_id is obviously not null terminated,
because it's not a string.
- The API and its behaviour should be conformant to POSIX, but there may
be things that slightly deviate from the standard. This implementation
uses separate file descriptors when writing to the log files. It also
doesn't use getutxid() to search for a field to overwrite. It uses an
allocation strategy similar to getutxid(), but prevents DEAD_PROCESS
records from accumulating.
Make sure libulog doesn't overwrite the manpages shipped with our C
library. Also keep the symbol list in Symbol.map sorted.
I'll bump __FreeBSD_version later this evening. I first want to convert
everything to <utmpx.h> and get rid of <utmp.h>.
now type sema_t is a structure which can be put in a shared memory area,
and multiple processes can operate it concurrently.
User can either use mmap(MAP_SHARED) + sem_init(pshared=1) or use sem_open()
to initialize a shared semaphore.
Named semaphore uses file system and is located in /tmp directory, and its
file name is prefixed with 'SEMD', so now it is chroot or jail friendly.
In simplist cases, both for named and un-named semaphore, userland code
does not have to enter kernel to reduce/increase semaphore's count.
The semaphore is designed to be crash-safe, it means even if an application
is crashed in the middle of operating semaphore, the semaphore state is
still safely recovered by later use, there is no waiter counter maintained
by userland code.
The main semaphore code is in libc and libthr only has some necessary stubs,
this makes it possible that a non-threaded application can use semaphore
without linking to thread library.
Old semaphore implementation is kept libc to maintain binary compatibility.
The kernel ksem API is no longer used in the new implemenation.
Discussed on: threads@
The <sys/termios.h> header file is hardlinked to <termios.h>. It
contains both the structures and the flag definitions, but also the C
library interface that's implemented by the C library.
This header file has the typical problem of including too many random
things and being badly ordered. Instead of trying to fix this, decompose
it into two header files:
- <sys/_termios.h>, which contains struct termios and the flags.
- <termios.h>, which includes <sys/_termios.h> and contains the C
library interface.
This means userspace has to include <termios.h> for struct termios,
while kernelspace code has to include <sys/tty.h>. Also add a
<sys/termios.h>, which prints a warning message before including
<termios.h>. I am aware that there are some applications that use this
header file as well.
controllers. Controller, array, and drive status can be checked, basic
attributes can be changed, and arrays and spares can be created and deleted.
Controller firmware can also be flashed.
This does not replace MegaCLI, found in ports, as that is officially sanctioned
and supported by LSI and includes vastly more functionality. However, mfiutil
is open source and guaranteed to provide basic functionality, which can be
especially useful if you have a problem and can't get MegaCLI to work.
Approved by: re
Obtained from: Yahoo! Inc.
modularize it so that new transports can be created.
Add a transport for SATA
Add a periph+protocol layer for ATA
Add a driver for AHCI-compliant hardware.
Add a maxio field to CAM so that drivers can advertise their max
I/O capability. Modify various drivers so that they are insulated
from the value of MAXPHYS.
The new ATA/SATA code supports AHCI-compliant hardware, and will override
the classic ATA driver if it is loaded as a module at boot time or compiled
into the kernel. The stack now support NCQ (tagged queueing) for increased
performance on modern SATA drives. It also supports port multipliers.
ATA drives are accessed via 'ada' device nodes. ATAPI drives are
accessed via 'cd' device nodes. They can all be enumerated and manipulated
via camcontrol, just like SCSI drives. SCSI commands are not translated to
their ATA equivalents; ATA native commands are used throughout the entire
stack, including camcontrol. See the camcontrol manpage for further
details. Testing this code may require that you update your fstab, and
possibly modify your BIOS to enable AHCI functionality, if available.
This code is very experimental at the moment. The userland ABI/API has
changed, so applications will need to be recompiled. It may change
further in the near future. The 'ada' device name may also change as
more infrastructure is completed in this project. The goal is to
eventually put all CAM busses and devices until newbus, allowing for
interesting topology and management options.
Few functional changes will be seen with existing SCSI/SAS/FC drivers,
though the userland ABI has still changed. In the future, transports
specific modules for SAS and FC may appear in order to better support
the topologies and capabilities of these technologies.
The modularization of CAM and the addition of the ATA/SATA modules is
meant to break CAM out of the mold of being specific to SCSI, letting it
grow to be a framework for arbitrary transports and protocols. It also
allows drivers to be written to support discrete hardware without
jeopardizing the stability of non-related hardware. While only an AHCI
driver is provided now, a Silicon Image driver is also in the works.
Drivers for ICH1-4, ICH5-6, PIIX, classic IDE, and any other hardware
is possible and encouraged. Help with new transports is also encouraged.
Submitted by: scottl, mav
Approved by: re
so that the .h files in src/sys/fs/nfs will be installed under
/usr/include/fs/nfs. This will allow the following utilities to
build, once additions and changes for the experimental nfs subsystem
are committed:
usr.sbin/mountd - Once modified to add support for the
experimental nfs subsystem.
ur.sbin/nfsstat - Once modified to add support for the
experimental nfs subsystem.
usr.sbin/nfscbd - The client side callback daemon for NFSv4.
usr.sbin/nfsuserd - The NFSv4 user/group name<->uid/gid mapping daemon.
usr.sbin/nfsdumpstate - The NFSv4 utility for dumping open/lock state.
usr.sbin/nfsrevoke - The sysadmin command for revoking NFSv4 state.
Approved by: kib (mentor)
src/sys/dev/usb2/core/usbdevs
src/sys/dev/usb2/include/urio2_ioctl.h
src/sys/dev/usb2/storage/ustorage2_fs.h
These files are not used any more.
src/usr.sbin/Makefile
src/etc/mtree/BSD.include.dist
src/include/Makefile
src/lib/Makefile
src/share/man/man7/hier.7
src/share/mk/bsd.libnames.mk
src/etc/mtree/BSD.include.dist
Make "usbconfig" and "libusb20" a part of the default build.
src/sys/dev/usb/rio500_usb.h
src/sys/dev/usb2/storage/urio2.c
Use common include file.
src/sys/dev/usb2/bluetooth/ng_ubt2.c
Make USB bluetooth depend on "ng_hci" module.
src/sys/dev/usb2/controller/ehci2.c
src/sys/dev/usb2/controller/ehci2.h
Patches for Marvell EHCI.
src/sys/dev/usb2/core/usb2_busdma.c
Bugfix for 64-bit platforms. Need to unload the previously loaded DMA
map and some cleanup regarding some corner cases.
src/sys/dev/usb2/core/usb2_core.h
src/sys/dev/usb2/core/usb2_dev.c
src/sys/dev/usb2/core/usb2_dev.h
Bugfix for libusb filesystem interface.
New feature: Add support for filtering device data at the expense of the
userland process.
Add some more comments.
Some minor code styling.
Remove unused function, usb2_fifo_get_data_next().
Fix an issue about "fifo_index" being used instead of "ep_index".
src/sys/dev/usb2/core/usb2_device.c
src/sys/dev/usb2/core/usb2_generic.c
Bugfix for Linux USB compat layer. Do not free non-generic FIFOs when
doing an alternate setting.
Cleanup USB IOCTL and USB reference handling.
Fix a corner case where USB-FS was left initialised after
setting a new configuration or alternate setting.
src/sys/dev/usb2/core/usb2_hub.c
Improvement: Check all USB HUB ports by default at least one time.
src/sys/dev/usb2/core/usb2_request.c
Bugfix: Make sure destination ASCII string is properly zero terminated
in all cases.
Improvement: Skip invalid characters instead of replacing with a dot.
src/sys/dev/usb2/core/usb2_util.c
src/sys/dev/usb2/image/uscanner2.c
Spelling.
src/sys/dev/usb2/include/Makefile
Share "usbdevs" with the old USB stack.
src/sys/dev/usb2/include/usb2_devid.h
src/sys/dev/usb2/include/usb2_devtable.h
Regenerate files.
Alfred: Please fix the RCS tag at the top.
src/sys/dev/usb2/include/usb2_ioctl.h
Fix compilation of "kdump".
src/sys/dev/usb2/serial/ubsa2.c
src/sys/dev/usb2/serial/ugensa2.c
Remove device ID's which will end up in a new 3G driver.
src/sys/dev/usb2/sound/uaudio2.c
Correct a debug printout.
src/sys/dev/usb2/storage/umass2.c
Sync with old USB stack.
src/lib/libusb20/libusb20.3
Add more documentation.
src/lib/libusb20/libusb20.c
Various bugfixes and improvements.
src/usr.sbin/usbconfig/dump.c
src/usr.sbin/usbconfig/usbconfig.c
New commands for dumping strings and doing custom USB requests from
the command line.
Remove keyword requirements from generated files:
"head/sys/dev/usb2/include/usb2_devid.h"
"head/sys/dev/usb2/include/usb2_devtable.h"
for quite some time now. While I'm not sure if it'll break IA64 again,
this way doesn't cause problems with my builds of XFree86/Xorg and the way
they #include <osreldate.h> via cpp in the imake system.
When I turned sgtty into a binary-only interface (last month), I added
this explicit #error to the header file, to make sure nobody forgot to
remove the header file after updating world.
I think it is now a good moment to remove this header file.
Approved by: philip (mentor)
can be used as replacements for exec/fork in a lot of cases. This
change also added execvpe() which allows environment variable
PATH to be used for searching executable file, it is used for
implementing posix_spawnp().
PR: standards/122051
parts relied on the now removed NET_NEEDS_GIANT.
Most of I4B has been disconnected from the build
since July 2007 in HEAD/RELENG_7.
This is what was removed:
- configuration in /etc/isdn
- examples
- man pages
- kernel configuration
- sys/i4b (drivers, layers, include files)
- user space tools
- i4b support from ppp
- further documentation
Discussed with: rwatson, re
NET_NEEDS_GIANT. netatm has been disconnected from the build for ten
months in HEAD/RELENG_7. Specifics:
- netatm include files
- netatm command line management tools
- libatm
- ATM parts in rescue and sysinstall
- sample configuration files and documents
- kernel support as a module or in NOTES
- netgraph wrapper nodes for netatm
- ctags data for netatm.
- netatm-specific device drivers.
MFC after: 3 weeks
Reviewed by: bz
Discussed with: bms, bz, harti
providers with limited physical storage and add physical storage as
needed.
Submitted by: Ivan Voras
Sponsored by: Google Summer of Code 2006
Approved by: re (kensmith)
NET_NEEDS_GIANT, which will shortly be removed. This is done in a
away that it may be easily reattached to the build before 7.1 if
appropriate locking is added. Specifics:
- Don't install netatm include files
- Disconnect netatm command line management tools
- Don't build libatm
- Don't include ATM parts in rescue or sysinstall
- Don't install sample configuration files and documents
- Don't build kernel support as a module or in NOTES
- Don't build netgraph wrapper nodes for netatm
This removes the last remaining consumer of NET_NEEDS_GIANT.
Reviewed by: harti
Discussed with: bz, bms
Approved by: re (kensmith)
sys/i4b/include/ so they will be available to all architectures
once I4B compiles on those.
I4B header files are now installed in include/i4b/ and no longer
in include/machine/.
For now we still install the headers for i386 only.
Approved by: re (kensmith)
read requests to its consumer. It has been developed to address
the problem of a horrible read performance of a 64k blocksize FS
residing on a RAID3 array with 8 data components, where a single
disk component would only get 8k read requests, thus effectively
killing disk performance under high load. Documentation will be
provided later. I'd like to thank Vsevolod Lobko for his bright
ideas, and Pawel Jakub Dawidek for helping me fix the nasty bug.
PowerPC-based Apple's machines and small utility to do it from
userland modelled after the similar utility in Darwin/OSX.
Only tested on 1.25GHz G4 Mac Mini.
MFC after: 1 month
uses them.
Now, we have res_nupdate and res_nmkupdate as well, but they are
still based on our old resolver for binary backward compatibility.
So, they don't provide new features such as TSIG support.
Reported by: pointyhat via kris
- <netipx> headers [1]
- IPX library (libipx)
- IPX support in ifconfig(8)
- IPXrouted(8)
- new MK_NCP option
New MK_NCP build option controls:
- <netncp> and <fs/nwfs> headers
- NCP library (libncp)
- ncplist(1) and ncplogin(1)
- mount_nwfs(8)
- ncp and nwfs kernel modules
User knobs: WITHOUT_IPX, WITHOUT_IPX_SUPPORT, WITHOUT_NCP.
[1] <netsmb/netbios.h> unconditionally uses <netipx> headers
so they are still installed. This needs to be dealt with.
Do install sys/security/audit include files. It would be nice just
to install audit_ioctl.h, but we seem only to support installing
directories, so we get them all. The two not intended for extra-
kernel use have !_KERNEL #error's, which should help.
Obtained from: TrustedBSD Project
