The way Secure RPC is set up, the ecb_crypt() routine is expected to
be able to encrypt a buffer of any size up to 8192 bytes. However, the
des_ecb_encrypt() routine in libdes only encrypts 8 bytes (64 bits) at a
time. The rpc_enc.c module should compensate for this by calling
des_ecb_encrypt() repeatedly until it has encrypted the entire supplied
buffer, but it does not do this.
As a workaround, keyserv now handles this itself: if we're using DES
encryption, and the caller requested ECB mode, keyserv will do the right
thing.
Also changed all references to 'rc4' into 'arcfour' just in case some
litigious bastard from RSA is watching.
Note that I discovered and fixed this problem while trying to get
a part of NIS+ working: rpc.nisd signs directory objects with a 16-byte
MD5 digest that is encrypted with ecb_crypt(). Previously, only the
first 8 bytes of the digest were being properly encrypted, which caused
the Sun nis_cachemgr to reject the signatures as invalid. I failed to
notice this before since Secure RPC usually never has to encrypt more
than 8 bytes of data during normal operations.
Submitted by: Forgotten
Passed on by: Terry Dwyer 61 8 9491 5161 <tdwyer@io.telstra.com.au>
Also remove extraneous setuid(0) - it's only undone by
the subsequent call to SelectSystem().
o Allow "set var" with no args to blank var (don't req "").
o Zero VarTerm ASAP if not in interactive mode.
o Never print anything to stdout in -direct mode.
o Count redial when failing to open modem.
o Increase device size to 40 characters (for host:port).
o Remove missed "if (fd == 0) fd = 1;".
o Don't give up on incoming non-terminal connections.
o Use syslog
o Remove references to stdout/stderr (incl perror())
o Introduce VarTerm - the interactive terminal or zero
o Allow "set timeout" to affect current session
o Change "set debug" to "set log"
o Allow "set log [+|-]flag"
o Make MSEXT and PASSWDAUTH stuff the default
o Move all #ifdef DEBUG stuff into the code - this
shouldn't be too much overhead. It's now controlled
with "set log +debug"
o Add "set log command, debug, tun, warn, error, alert"
o Remove cdefs.h, and assume an ansi compiler.
o Improve all diagnostic output
o Don't trap SIGSEGV
o SIGHUP now terminates again (log files are controlled
by syslog)
o Call CloseModem() when changing devices
o Fix parsing of third arg of "delete"
I think this fixes the "magic is same" problems that some
people have been experiencing.
The man page is being rewritten. It'll follow soon.
will break compilation if DESTDIR is not set. The update.c module is
actually from the Sun RPC distribution so this is really their bogon, but
I should have noticed it when I integrated the code into rpc.ypupdated.
Sung to me by: Satoshi
received and after the TerminateAck is sent (as
per rfc1661) rather than to ST_STOPPING. Going
to ST_STOPPING will leave us in a state where
we're waiting for the other side to do something -
not a good idea, especially as the client side sends
a TerminateReq then exits on idle timeout.
This version supports both the keyserv v1 and v2 protocols. It uses the
new AF_LOCAL transport so that only local processes can use it for
storing/retrieving keys, and it uses the SCM_CREDS kernel hack for
authentication. With these two modifications, we don't need the keyenvoy
program normally used with RPC 4.0.
Note that if libdes.so.3.x is present on the system when keyserv
is started, Secure RPC will run with normal DES encryption. If not,
everything falls back to RC4 with a 40 bit key.
alias commands simply won't work. Only root may specify the
location of the alias lib (otherwise, it's hard-coded).
Make logprintf silently fail if LogOpen hasn't been called.
Suggested by: eivind
The standard SunOS ypbind(8) (and, until now, the FreeBSD ypbind)
only selects servers based on whether or not they respond to clnt_broadcast().
Ypbind(8) broadcasts to the YPPROC_DOMAIN_NONACK procedure and waits
for answers; whichever server answers first is the one ypbind uses
for the local client binding.
This mechanism fails when binding across subnets is desired. In order
for a client on one subnet to bind to a server on another subnet, the
gateway(s) between the client and server must be configured to forward
broadcasts. If this is not possible, then a slave server must be
installed on the remote subnet. If this is also not possible, you
have to force the client to bind to the remote server with ypset(8).
Unfortunately, this last option is less than ideal. If the remote
server becomes unavailable, ypbind(8) will lose its binding and
revert to its broadcast-based search behavior. Even if there are
other servers available, or even if the original server comes back
up, ypbind(8) will not be able to create a new binding since all
the servers are on remote subnets where its broadcasts won't be heard.
If the administrator isn't around to run ypset(8) again, the system
is hosed.
In some Linux NIS implementations, there exists a yp.conf file where
you can explicitly specify a server address and avoid the use of
ypbind altogether. This is not desireable since it removes the
possibility of binding to an alternate server in the event that the
one specified in yp.conf crashes.
Some people have mentioned to me how they though the 'restricted mode'
operation (using the -S flag) could be used as a solution for this
problem since it allows one to specify a list of servers. In fact,
this is not the case: the -S flag just tells ypbind(8) that when it
listens for replies to its broadcasts, it should only honor them if
the replying hosts appear in the specified restricted list.
This behavior has now been changed. If you use the -m flag in conjunction
with the -S flag, ypbind(8) will use a 'many-cast' instead of a broadcast
for choosing a server. In many-cast mode, ypbind(8) will transmit directly
to the YPPROC_DOMAIN_NONACK procedure of all the servers specified in
the restricted mode list and then wait for a reply. As with the broadcast
method, whichever server from the list answers first is used for the
local binding. All other behavior is the same: ypbind(8) continues
to ping its bound server every 60 seconds to insure it's still alive
and will many-cast again if the server fails to respond. The code used
to achieve this is in yp_ping.c; it includes a couple of modified RPC
library routines.
Note that it is not possible to use this mechanism without using
the restricted list since we need to know the addresses of the available
NIS servers ahead of time in order to transmit to them.
Most-recently-requested by: Tom Samplonius
of reconnect & -background.
o Fix reconnect anomolies.
o Make reconnect apply to failed LQR hangups (& mention in man page).
o Make reconnect effective in -background mode.
o Listen on socket in -background mode.
o Try all phone numbers in -background mode.
o Insist on system arg in -background mode.
o Make a control-connection close command exit in -background mode.
o Output status message to stdout on exit of parent in -background mode.
o Don't notify parent of success too soon.
o Describe termination EX_* code.
o Miscelaneous diagnostic corrections.
o Remove redundant connect_time from modem.c.
o Don't repeatedly DownConnection().
to FTS_LOGICAL (follow symlinks and return their targets)
Because
1) In the real system there is a lot of symlinks nowdays over
/var, /spool, etc. Mtree can't do anything for them, i.e. change
permissions/owner. I.e. if you have /var/mail -> /somewhere
it will never be changed to group "mail" 775 like -current does now,
symlink totally confuses mtree.
2) Mtree can't deal with symlinks properly in any case (they are created
separately in other places now), so we lost no functionality by making
them invisible for mtree.
