Clean up the ttys files shipped with PicoBSD, NanoBSD and TinyBSD. While
there, it seems one of them still had references to sio(4). Make it in
sync with what we do in the base system.
Right now syscons(4) uses a cons25-style terminal emulator. The
disadvantages of that are:
- Little compatibility with embedded devices with serial interfaces.
- Bad bandwidth efficiency, mainly because of the lack of scrolling
regions.
- A very hard transition path to support for modern character sets like
UTF-8.
Our terminal emulation library, libteken, has been supporting
xterm-style terminal emulation for months, so flip the switch and make
everyone use an xterm-style console driver.
I still have to enable this on i386. Right now pc98 and i386 share the
same /etc/ttys file. I'm not going to switch pc98, because it uses its
own Kanji-capable cons25 emulator.
IMPORTANT: What to do if things go wrong (i.e. graphical artifacts):
- Run the application inside script(1), try to reduce the problem and
send me the log file.
- In the mean time, you can run `vidcontrol -T cons25' and `export
TERM=cons25' so you can run applications the same way you did before.
You can also build your kernel with `options TEKEN_CONS25' to make all
virtual terminals use the cons25 emulator by default.
Discussed on: current@
This seems more useful and will likely be in the next POSIX standard.
Also document more precisely in the man page what set -u does (note that
$@, $* and $! are the only special parameters that can ever be unset, all
the others are always set, although they may be empty).
* retry various system calls on EINTR
* retry the rest after a short read (common if there is more than about 1K
of output)
* block SIGCHLD like system(3) does (note that this does not and cannot
work fully in threaded programs, they will need to be careful with wait
functions)
PR: 90580
MFC after: 1 month
netsend 127.0.0.1 6666-7777 [payloadsize] [packet_rate] [duration]
This is useful to test the behaviour of systems that do some kind
of flow classifications and so exhibit different behaviour depending
on the number of flows that hit them.
I plan to add a similar extension to sweep on a range of IP addresses,
so we can issue a single command to flood (obviously, for testing
purposes!) a number of different destinations.
When there is only one destination, we do a preliminary connect()
of the socket so we can use send() instead of sendto().
When we have multiple ports, the socket is not connect()'ed and we
do a sendto() instead. There is a performance hit in this case,
as the throughput on the loopback interface (with a firewall rule
that blocks the transmission) goes down from 900kpps to 490kpps on
my test machine.
If the number of different destinations is limited, one option to
explore is to have multiple connect()ed sockets.
MFC after: 1 month
(hardwired to once every 20us at most).
I found out that on many machines round here, i could only get
300-400kpps with netsend even on loopback and a 'deny' rule in
the firewall, while reducing the number of calls to gettimeofday()
brings the value to 900kpps and more.
This code is just a quick fix for the problem. Of course it could be
done better, with proper getopt() parsing and the like, but since
this applies to the entire program i'll postpone that to when i have
more time.
Reviewed by: rwatson
MFC after: 1 month
- slightly adjust code for style, sort headers.
- in sigqtest2, print received signals, to make it easy to see why test
failed.
- in sigqtest2, job_control_test(), cover a race by adding sleep after
child stopped itself to allow for SIGCHLD due to stop and exit to not
be coalesced.
MFC after: 2 weeks
This also fixes that trying to execute a non-regular file with a command
name without '/' returns 127 instead of 126.
The fix is rather simplistic: treat CMDUNKNOWN as if the command were found
as an external program. The resulting fork is a bit wasteful but executing
unknown commands should not be very frequent.
PR: bin/137659
Due to the amount of code removed by this, it seems that allowing unmatched
quotes was a deliberate imitation of System V sh and real ksh. Most other
shells do not allow unmatched quotes (e.g. bash, zsh, pdksh, NetBSD /bin/sh,
dash).
PR: bin/137657
The most important test is the mapping fixed at address 0 depending on the
new sysctl.
Things will be updated and possibly converted to m4/.t style once the
details about the kernel patch will be shaken out.
Submitted by: simon (initial version)
handler to make it more clear why we are 'suddenly' running df,
umount, and mdconfig.
- Remove trap handler again after we have unconfigured the memory
device etc. Before we could end up running the trap handler if a
later stage failed, which was a bit confusing and not really useful.
MFC after: 2 weeks
"The escape sequence '\n' shall match a <newline> embedded in
the pattern space."
It is unclear whether this also applies to a \n embedded in a
character class. Disable the existing handling of \n in a character
class following Mac OS X, GNU sed version 4.1.5 with --posix, and
SunOS 5.10 /usr/bin/sed.
Pointed by: Marius Strobl
Obtained from: Mac OS X
of the y (translate) command.
"If a backslash character is immediately followed by a backslash
character in string1 or string2, the two backslash characters shall
be counted as a single literal backslash character"
Pointed by: Marius Strobl
Obtained from: Mac OS X
Empty pairs of braces are represented by a NULL node pointer, just like
empty lines at the top level.
Support for empty pairs of braces may be removed later. They make the code
more complex, have inconsistent behaviour (may or may not change $?), are
not specified by POSIX and are not allowed by some other shells like bash,
dash and ksh93.
Reported by: kan
- Add linprocfs and linsysfs to the linuxulator dox.
- Take the generated includes from the .m files from a subdirectory
instead of putting everything into $(.OBJDIR). This imporves the
human readbility of the source directory contents a lot, if you do not
create a separate OBJDIR.
- Assume UTF-8 encoding for every input file.
- Strip the source and dest path from the output, we are not interested
in the absolute location on the machine where the docs are created,
relative the the root of the FreeBSD source is what interests us.
- Exclude .svn directories.
- Switch to alphabetic index.
- Use one line per INCLUDE_PATH member in the common dox-config.
- Bump the __FreeBSD__ version to 9. [MFC: to 8]
- Switch from hardcoded .m files to an run-time generated one. Takes
a little bit more time to get started with actual work, but at least
is more future-proof. If you generate dox for all subsystems, the
time to find all .m files in the source is magnitutes lower than
producing the docs.
- Make the *DEST_PATH overidable from the environment. This allows to
produce the output directly in the docroot of a webserver.
- Fix the path when telling the user where he can find the API docs.
MFC after: 1 month (after 8.0)
Add a reference count to function definitions.
Memory may leak if multiple SIGINTs arrive in interactive mode,
this will be fixed later by changing SIGINT handling.
PR: bin/137640
reported as failures, even if the actual library / system call
would succeed, because error message would be reported if the return
value from jail_setv() call was >= 0, and if not, then if that same
value was < 0, i.e. always. The correct behavior is to abort (only)
if jail_setv() returns < 0.
Approved by: re (rwatson), julian (mentor)
network stack instances, which is provided for compatibility with
older applications. This change brings it back to life in a followup
to the initial conversion of vimage to use the new jail(4)
userland-kernel API:
- when creating vimages via "vimage -c", by default turn on a few
options expected by legacy applications, such as allow operations on
raw sockets, FS mounts etc, and allow jail-related parameters to be
optionally configured.
- introduce the "-m" modifier which allows for configuring jail
parameters of existing vimages / vnet-jails.
- make "vimage name command ..." actually work.
- when reassigning ifnets to vnets using "vimage -i", attempt to rename
the ifnet as "ethXXX" on arrival in the target vnet. Several legacy
applications are known to depend heavily on such behavior.
- vimage -l lists only jails associated with vnets. The output is
sorted using vimage / jail names as keys.
- vimage -l by default searches only the current level in the jail
hierarchy. Recursive listing can be requested via -r switch.
- vimage -l by default prints only jail names on each line, making
such output suitable for pipelining to other commands. More verbose
output can be obtained via -v switch, and even more jail specific
information will be displayed if -j switch is turned on.
- there's no need to build vimage as statically linked, so update the
Makefile accordingly.
- update the vimage.8 man page.
Approved by: re (rwatson), julian (mentor)
MFC after: immediately
Make regression/priv compile again after the multi-IP jail
changes. Note that we are still using the legacy jail(2)
rather than the jail_set(2)/jail(3) syscall.
Add an IPv4, and an IPv6 loopback address in case we compile
with INET6 enabled.
Make the priv_vfs_extattr_system compile on amd64 as well using the
proper length modifier to printf(3) for ssize_t.
Reviewed by: rwatson
Approved by: re (kib)