* ACL storage is no longer erased before a group of entries are added.
* ACL text creation no longer tries to skip over non-existent text.
* UTF8 encoder no longer blows up on invalid wide characters.
* Fixed ACL state management for default ACLs.
Also, publicize function for obtaining text-format ACL in various
formats. The interface is now extensible through a "flags" argument
that allows you to select a variant format.
with 'star' ACL handling, though there's still a
bit more work needed in this area.
Added 'write_open_fd' and 'read_open_fd' to simplify, e.g.,
tar's u and r modes. Eliminated old 'write_open_file_position'
as a bad idea. (It required closing/reopening files to
do updates, which led to unpleasant implications.)
Various other minor fixes, API tweaks, etc.
on temporary nameserver failure. This is necessary to get
getipnodebyname(3) to correctly return h_errno=TRY_AGAIN instead
of HOST_NOT_FOUND.
Reviewed by: green, thomas
MFC after: 1 week
case where an /etc/nsswitch.conf file was present, but could not
be opened (e.g. due to permissions). Previously, the open failure
condition was suppressed, and the built-in defaults were used. In
revision 1.11, however, propagated the open failure causing all
nsdispatch() invocations to return NS_UNAVAIL, and thus many APIs
including getpwnam and gethostbyname unconditionally failed.
This commit restores the previous behavior.
Pointy hat: nectar (+1 for obstinance; ache had to use clue bat)
Reported by: ache
solved by a simple 'make world'. The signalcontext function was going
to the trouble of generating an even 16 byte alignment, but in fact it
needed to be odd aligned to simulate the 8-byte return address having
been pushed by the caller. This fixes yet another group of crashes in
applications using libpthread. And yet again, it was my fault all along.
While here, rename the duplicate internal ctx_wrapper() functions to
makectx_wrapper() and sigctx_wrapper() so that traces aren't ambiguous.
library, it may pull in that thread library at run time. If the
process started out single-threaded, this could cause attempts to
release locks that do not exist. Guard against this possibility by
checking __isthreaded before invoking thread primitives.
A similar problem remains if the process is linked against one thread
library, but the NSS module is linked against another. This can only
be avoided by careful design of the NSS module.
Submitted by: Sean McNeil <sean@mcneil.com> (mostly; bugs are mine)
functionality spelled out in SUSv3.
o Signal of 0 means do everything except send the signal
o Check that the signal is not invalid
o Check that the target thread is not dead/invalid
sigprocmask no longer needs to be wrapped.
o raise(3) is applied to the calling thread in a threaded program.
o In the sigaction wrapper reference the correct structure.
o Don't treat SIGTHR especially anymore (infact it won't exist in
a little while).
we still have to DTRT when an asynchronously cancellable thread is
cancelled while waiting for a mutex.
o While dequeueing a waiting mutex don't skip a thread if it has
a cancel pending. Only skip it if it is also async cancellable.
the cause of any bugs because it is *always* indirectly set
in the for...loop, but better to be explicit about it.
o Check the magic number of the passed in thread only after it has
been found in the active thread list. Otherwise, if the check is done
at the very beginning we may end up pointing to garbage if the
thread was once a valid thread, but has now been destroyed.
* Disabled shared-library building, as some API breakage is
still likely. (I didn't realize it was turned on by default.) If
you have an existing /usr/lib/libarchive.so.2, I recommend deleting it.
* Pax interchange format now correctly stores and reads UTF8
for extended attributes. In particular, pax format can portably
handle arbitrarily long pathnames containing arbitrary characters.
* Library compiles cleanly at -O2, -O3, and WARNS=6 on all
FreeBSD-CURRENT platforms.
* Minor portability improvements inspired by Juergen Lock
and Greg Lewis. (Less reliance on stdint.h, isolating of
various portability-challenged constructs.)
* archive_entry transparently converts multi-byte <-> wide character
strings, allowing clients and format handlers to deal with either
one, as appropriate.
* Support for reading 'L' and 'K' entries in standard tar archives
for star compatibility.
* Recognize (but don't yet handle) ACL entries from Solaris tar.
* Pushed format-specific data for format readers down into
format-specific storage and out of library-global storage. This
should make it easier to maintain individual formats without mucking
with the core library management.
* Documentation updates to track the above changes.
* Updates to tar.5 to correct a few mistakes and add some additional
information about GNU tar and Solaris tar formats.
Notes:
* The basic 'tar' reader is getting more general; there's not much
point in keeping the 'gnutar' reader separate. Merging the two
would lose a bunch of duplicate code.
* The libc ACL support is looking increasingly inadequate for my needs
here. I might need to assemble some fairly significant code for
parsing and building ACLs. <sigh>
ferror(), fileno() and clearerr(), using the value of __isthreaded to
decide between the fast inline single-threaded code and the more
general function equivalent. This gives most of the performance
benefits of the old unsafe macros while preserving thread safety.
addresses. For arch's with 64-bit longs, this is a nop, but for i386 this
allows sysinstall to properly handle disks and filesystems > 1 TB.
Changes from the original patch include:
- Use d_addr_t rather than inventing a blkcnt type based on int64_t.
- Use strtoimax() rather than strtoull() to parse d_addr_t's from config
files.
- Use intmax_t casts and %jd rather than %llu to printf d_addr_t values.
Tested on: i386
Tested by: kuriyama
Submitted by: julian
MFC after: 1 month
MATH_ERREXCEPTION and math_errhandling, so that C99 applications at
least have the possibility of determining that errno is not set for
math functions. Set math_errhandling to the non-standard-conforming
value of 0 for now to indicate that we don't support either method
of reporting errors. We intentionally don't support MATH_ERRNO
because errno is a mistake, and we are missing support for
MATH_ERREXCEPTION (<fenv.h>, compiler support for <fenv.h>, and
actually setting the exception flags correctly).
- Add DECL wrappers to libgeom.h.
- Rename structure members in libgeom.h to use a lg_ prefix for member
names. This is required because a few structures had members named
'class' which made g++ very unhappy.
- Catch gstat(8) and gconcat(8) up to these API changes.
Reviewed by: phk
Portability: Thanks to Juergen Lock, libarchive now compiles cleanly
on Linux. Along the way, I cleaned up a lot of error return codes and
reorganized some code to simplify conditional compilation of certain
sections.
Bug fixes:
* pax format now actually stores filenames that are 101-154
characters long.
* pax format now allows newline characters in extended attributes
(this fixes a long-standing bug in ACL handling)
* mtime/atime are now restored for directories
* directory list is now sorted prior to fix-up to permit
correct restore of non-writable dir heirarchies
structure and call stdio functions. In 5.X this was broken when FILE
locking was introduced into libc.
This change makes most (relevant) stdio functions work again when the
_extra file in FILE isn't initialised (and can't be without a libc
function to do it since the __sFILEX structure is private to libc).
This doesn't yet address the issue of selective restore
of hardlinked files. With cpio format, it's possible to correctly
restore any linked file; the API doesn't yet fully support this.
(There's no way for the library to inform a client whether or not
there's a file body associated with this entry. The assumption
right now is that "hardlink" entries have no file body.)
cleanups, handling 'ls -l-', handling '--*'
Note this is in the same time back out of our v1.3
"Don't print an error message if the bad option is '?'"
because it directly violates POSIX.
the size in the archive_entry object to zero if that format doesn't
store a body for that file type. This allows the client to determine
whether or not it should feed the file body to the archive. In
particular, cpio stores the file body for hardlinks, tar and shar
don't. With this change, bsdtar now correctly archives hardlinks in all
supported formats.
While I'm here, make shar output be more aggressive about creating directories.
Before this, commands such as:
bsdtar -cv -F shar some/explicit/path/to/a/file
wouldn't create the directory. Some simple logic to remember the last
directory creation helps reduce unnecessary mkdirs here.
At this point, I think the only flaw in libarchive's cpio support is
the failure to recognize hardlinks when reading.
While I'm here, fix a bug in reading filenames from
cpio files. (Copy should count the length of the name,
not the number of bytes available for input.)
that this provokes. "Wherever possible" means "In the kernel OR NOT
C++" (implying C).
There are places where (void *) pointers are not valid, such as for
function pointers, but in the special case of (void *)0, agreement
settles on it being OK.
Most of the fixes were NULL where an integer zero was needed; many
of the fixes were NULL where ascii <nul> ('\0') was needed, and a
few were just "other".
Tested on: i386 sparc64
Further contemplation has convinced me that this was
not going to really solve the problem of environment-poisoning
without raising serious administrative headaches. There
must be a better way...
- Fix syntax
- Remove the (slightly wrong) duplicate explanation of the error condition
- Change reference to invalid multibyte character into invalid wide character
This function removes all environment variables except
the ones listed on a "whitelist."
The function accepts two whitelist arguments.
If the first is NULL, a built-in default list will be
used. This allows callers to get a variety of behaviors:
* Default screening: provide NULL for both lists
* Custom screening: provide a custom list for the first argument
* Modified default screening: provide NULL for first arg,
list of additional variables to preserve in the second arg
Idea from: Jacques Vidrine
MFC after: 2 weeks
-static to CFLAGS). It just turned rev.1.5 into an obfuscated no-op.
As explained in the log for rev.1.5, testing should be done in the
host environment but there is a problem in cross-compilation environments.
As not explained in the log for rev.1.6, there was apparently a practical
problem with cross-compiling (makeworld should have set -static in
LDFLAGS but apparently didn't). Cross-compilation was especially
complicated because the relevant programs are test programs that were
run at beforeinstall time -- dynamic libraries might or might not exist
depending on the build options. The complications became moot in
rev.1.8 when beforeinstall was renamed "test".
The getaddrinfo(3), getipnodebyname(3) and resolver(3) can coincide now
with what should be totally reentrant, and h_errno values will now
be preserved correctly, but this does not affect interfaces such as
gethostbyname(3) which are still mostly non-reentrant.
In all of these relevant functions, the thread-safety has been pushed
down as far as it seems possible right now. This means that operations
that are selected via nsdispatch(3) (i.e. files, yp, dns) are protected
still under global locks that getaddrinfo(3) defines, but where possible
the locking is greatly reduced. The most noticeable improvement is
that multiple DNS lookups can now be run at the same time, and this
shows major improvement in performance of DNS-lookup threaded programs,
and solves the "Mozilla tab serialization" problem.
No single-threaded applications need to be recompiled. Multi-threaded
applications that reference "_res" to change resolver(3) options will
need to be recompiled, and ones which reference "h_errno" will also
if they desire the correct h_errno values. If the applications already
understood that _res and h_errno were not thread-safe and had their own
locking, they will see no performance improvement but will not
actually break in any way.
Please note that when NSS modules are used, or when nsdispatch(3)
defaults to adding any lookups of its own to the individual libc
_nsdispatch() calls, those MUST be reentrant as well.
the caller does not specify the rule number -- instead, the kernel
module is probed for the next available rule, which is then used.
Obtained from: TrustedBSD Project
Sponsored by: DARPA, McAfee Research
through a realloc like function.
Make the malloc_active variable a local static to this new function.
Don't warn about recursion more than once per base call.
constify malloc_func.
has been hit, this makes it cover more cases.
Call the message function directly rather than fiddle with flag-saving
when we find an unknown character in our options.
The 'A' flag should not trigger on legal out of memory conditions.
has been executed. On return from the signal handler
the call will either be restarted or EINTR will be returned,
but it will not go back to its previous state. So, it is
sufficient to simply change the state to 'running' without
actually trying to wake up the thread.
a PTHREAD_RWLOCK_INITIALIZER to do for rwlocks what
a similarly named symbol does for statically initialized mutexes.
This symbol was dropped in The Open Group Base Specifications Issue 6
and does not exist in IEEE Std 1003.1, 2003, but it should still be
supported for backwards compatibility.
Pointy hat: mtm
o Instead of checking both the passed in pointer and its value
for NULL, only check the latter. Any caller that passes in
a NULL pointer is obviously wrong.
o Fix mutex priority protocols. Keep separate counts of priority
inheritance and protection mutexes to make things easier.
This will not have much affect since this is only the
userland side, and the rest involves kernel scheduling.
Unfortunately, the stock zlib.h is not:
line 885: 'err' parameter shadows global 'err' definition from <err.h>
Back the WARNS level down to 3 to accomodate borked zlib.h.
reply with a 416 error code (requested range not satisfiable) because
we ask it to start at the end of the file. Handle this gracefully by
considering a 416 reply a success if the requested offset exactly
matches the length of the file and the requested length is zero.
This is the second of two commits; bring in the userland support to finish.
Teach libipsec and setkey about the tcp-md5 class of security associations,
thus allowing administrators to add per-host keys to the SADB for use by
the tcpsignature_compute() function.
Document that a single SPI must be used until such time as the code which
adds support to the SPD to specify flows for tcp-md5 treatment is suitable
for production.
Sponsored by: sentex.net
These files had tags after teh copyright notice,
inside the comment block (incorrect, removed),
and outside the comment block (correct).
Approved by: rwatson (mentor)
These files had tags after the copyright notice,
inside the comment block (incorrect, removed),
and outside the comment block (correct).
Approved by: rwatson (mentor)
What it is:
A library for reading and writing various streaming archive
formats, especially tar and cpio. Being a library, it should
be easy to incorporate into pkg_* tools, sysinstall, and any
other place that needs to read or write such archives.
Features:
* Full automatic detection of both compression and archive format.
* Extensible internal architecture to make it easy to add new formats.
* Support for "pax interchange format," a new POSIX-standard tar format
that eliminates essentially all of the restrictions of historic formats.
* BSD license
Thanks to: jkh for pushing me to start this work, gordon for
encouraging me to commit it, bde for answering endless style
questions, and many others for feedback and encouragement.
Status: Pretty good overall, though there are still a few rough edges and
the library could always use more testing. Feedback eagerly solicited.
overridden by the threads library to provide a userland version
of non-pshared semaphores and cancellation points. Also add
a sem_timedwait().
The libc version of semaphores always uses kernel semaphores
regardless of whether pshared is set or not. When threads are
not present, it is difficult to get sem_wait() or sem_timedwait()
to do the right thing (since pthread_cond_timedwait() and
pthread_cond_wait() are stubs in libc and just return immediately).
caller without closing the disk device and freeing allocated
memory. Not closing the disk device prevents GEOM from retasting
after spoiling.
Pointy hat: marcel
thread library for i386, amd64, and ia64. For alpha
and sparc64 the library is not changed and remains libkse,
and links are installed so that libpthread -> libc_r.
The gcc -pthread option will be changed in a separate
commit so that it links to -lpthread instead of -lc_r.
Approved by: re@
what do I get for my troubles? libc breaks offcourse!
Reimplement a hack (in libthr) that allows libc to use
rwlocks without initializing them first. The hack was reimplemented
so that only a private libc version of the rwlock locking functions
initializes an uninitialized rwlock. The application version will
correctly fail.
the system call got interrupted and the absolute timeout is
converted to a relative timeout, it may happen that we get a
negative number. In such a case, simply set the timeout to
zero so that if the event that the thread wants to wait for has
happened it can still return successfully, but if it hasn't
happened then the thread doesn't suspend indefinitely. This should
fix certain applications (including mozilla) that seem to hang
indefinitely sometimes.
Noticed and debugged by: Morten Johansen <root@morten-johansen.net>
