- use utility macros for CPU family/model checking
- limit Intel P6 quirk to pre-Nehalem models (taken from OpenSolaris)
- add AMD GartTblWkEn quirk for families 0Fh and 10h; I haven't experienced
any problems without the quirk but both Linux and OpenSolaris do this
- slightly re-arrange quirk code to provide for the future generalization
and separation of vendor-specific quirk functions
Reviewed by: jhb
MFC after: 1 week
- directly print mca information in case we fail to allocate memory
for a record
- include bank number into mca record
- print raw mca status value for extended information
Reviewed by: jhb
MFC after: 10 days
The hardware is compliant with WDRT specification, so I originally
considered including generic WDRT watchdog support, but decided
against it, because I couldn't find anyone to the code for me.
WDRT seems to be not very popular.
Besides, generic WDRT porbably requires a slightly different driver
approach.
Reviewed by: des, gavin, rpaulo
MFC after: 3 weeks
the filter as we do from bpf_filter()[1].
- Revert experimental use of contigmalloc(9)/contigfree(9). It has no
performance benefit over malloc(9)/free(9)[2].
Requested by: rwatson[1]
Pointed out by: rwatson, jhb, alc[2]
the generated binary and remove page size limitation for userland.
- Use contigmalloc(9)/contigfree(9) instead of malloc(9)/free(9) to make
sure the generated binary aligns properly and make it physically contiguous.
not properly set up. r199067 added the call to TUNABLE_INT_FETCH() to
initializecpu() that results in hang because AP are started when kernel
environment is already dynamic and thus needs to acquire mutex, that is
too early in AP start sequence to work.
Extract the code that should be executed only once, because it sets
up global variables, from initializecpu() to initializecpucache(),
and call the later only from hammer_time() executed on BSP. Now,
TUNABLE_INT_FETCH() is done only once at BSP at the early boot stage.
In collaboration with: Mykola Dzham <freebsd levsha org ua>
Reviewed by: jhb
Tested by: ed, battlez
functions are selfcontained (ie. they touch only isa_dma.c static variables
and hardware) so a private lock is sufficient to prevent races. This changes
only i386/amd64 while there are also isa_dma functions for ia64/sparc64.
Sparc64 are ones empty stubs and ia64 ones are unused as ia64 does not
have isa (says marcel).
This patch removes explicit locking of Giant from a few drivers (there
are some that requires this but lack ones - this patch fixes this) and
also removes the need for implicit locking of Giant from attach routines
where it's provided by newbus.
Approved by: ed (mentor, implicit)
Reviewed by: jhb, attilio (glanced by)
Tested by: Giovanni Trematerra <giovanni.trematerra gmail com>
IA64 clue: marcel
map_invalidate_cache_range() even if CPU is not Intel.
- This tunable can be set to -1 (default), 0 and 1. -1 is same as
current behavior, which automatically disable CLFLUSH on Intel CPUs
without CPUID_SS (should be occured on Xen only). You can specify 1
when this panic happened on non-Intel CPUs (such as AMD's). Because
disabling CLFLUSH may reduce performance, you can try with setting 0
on Intel CPUs without SS to use CLFLUSH feature.
Reviewed by: kib
Reported by: karl, kuriyama
Related to: kern/138863
ocassions, memory barriers semantic is not honoured by the hardware
itself. As a result, some random breakage can happen in uninvestigable
ways (for further explanation see at the content of the commit itself).
As long as just a specific familly is bugged of an entire architecture
is broken, a complete fix-up is impratical without harming to some
extents the other correct cases.
Considering that (and considering the frequency of the bug exposure)
just print out a warning message if the affected machine is identified.
Pointed out by: Samy Al Bahra <sbahra at repnop dot org>
Help on wordings by: jeff
MFC: 3 days
partially fixed on amd64 earlier. Rather than forcing linux_mmap_common()
to use a 32-bit offset, have it accept a 64-bit file offset. This offset
is then passed to the real mmap() call. Rather than inventing a structure
to hold the normal linux_mmap args that has a 64-bit offset, just pass
each of the arguments individually to linux_mmap_common() since that more
closes matches the existing style of various kern_foo() functions.
Submitted by: Christian Zander @ Nvidia
MFC after: 1 week
while in kernel mode, and later changing signal mask to block the
signal, was fixed for sigprocmask(2) and ptread_exit(3). The same race
exists for sigreturn(2), setcontext(2) and swapcontext(2) syscalls.
Use kern_sigprocmask() instead of direct manipulation of td_sigmask to
reschedule newly blocked signals, closing the race.
Reviewed by: davidxu
Tested by: pho
MFC after: 1 month
the memory or D-cache, depending on the semantics of the platform.
vm_sync_icache() is basically a wrapper around pmap_sync_icache(),
that translates the vm_map_t argumument to pmap_t.
o Introduce pmap_sync_icache() to all PMAP implementation. For powerpc
it replaces the pmap_page_executable() function, added to solve
the I-cache problem in uiomove_fromphys().
o In proc_rwmem() call vm_sync_icache() when writing to a page that
has execute permissions. This assures that when breakpoints are
written, the I-cache will be coherent and the process will actually
hit the breakpoint.
o This also fixes the Book-E PMAP implementation that was missing
necessary locking while trying to deal with the I-cache coherency
in pmap_enter() (read: mmu_booke_enter_locked).
The key property of this change is that the I-cache is made coherent
*after* writes have been done. Doing it in the PMAP layer when adding
or changing a mapping means that the I-cache is made coherent *before*
any writes happen. The difference is key when the I-cache prefetches.
handlers. This is primarily intended as a way to allow devices that use
multiple interrupts (e.g. MSI) to meaningfully distinguish the various
interrupt handlers.
- Add a new BUS_DESCRIBE_INTR() method to the bus interface to associate
a description with an active interrupt handler setup by BUS_SETUP_INTR.
It has a default method (bus_generic_describe_intr()) which simply passes
the request up to the parent device.
- Add a bus_describe_intr() wrapper around BUS_DESCRIBE_INTR() that supports
printf(9) style formatting using var args.
- Reserve MAXCOMLEN bytes in the intr_handler structure to hold the name of
an interrupt handler and copy the name passed to intr_event_add_handler()
into that buffer instead of just saving the pointer to the name.
- Add a new intr_event_describe_handler() which appends a description string
to an interrupt handler's name.
- Implement support for interrupt descriptions on amd64 and i386 by having
the nexus(4) driver supply a custom bus_describe_intr method that invokes
a new intr_describe() MD routine which in turn looks up the associated
interrupt event and invokes intr_event_describe_handler().
Requested by: many
Reviewed by: scottl
MFC after: 2 weeks
by looking at the bases used for non-relocatable executables by gnu ld(1),
and adjusting it slightly.
Discussed with: bz
Reviewed by: kan
Tested by: bz (i386, amd64), bsam (linux)
MFC after: some time
specify their own version of atomic_cmpset_* which could have been
different than the membar version.
Right now, however, FreeBSD is bound mostly to GCC-like compilers and
it is desired to add new support and compat shim mostly when there is
a real necessity, in order to avoid too much compatibility bloats.
In this optic, bring back atomic_cmpset_{acq, rel}_* to be the same as
atomic_cmpset_* and unwind the atomic_cmpset_barr_* introduction.
Requested by: jhb
Reviewed by: jhb
Tested by: Giovanni Trematerra <giovanni dot trematerra at
gmail dot com>
- Allocate memory for wakeup code after ACPI bus is attached. The early
memory allocation hack was inherited from i386 but amd64 does not need it.
- Exclude real mode IVT and BDA explicitly. Improve comments about memory
allocation and reason for the exclusions. It is a no-op in reality, though.
- Remove an unnecessary CLD from wakeup code and re-align.
not defined through macros or similar) in order to be later compiled in
the kernel and offer this way the support for modules (and
compatibility among the UP case and SMP case).
Fix this for the newly introduced atomic_cmpset_barr_* cases by defining
and specifying a template. Note that the new DEFINE_CMPSET_GEN()
template save more typing on amd64 than the current code. [1]
- Fix the style for memory barriers on amd64.
[1] Reported by: Paul B. Mahol <onemda at gmail dot com>
memory barriers should also ensure that the compiler doesn't reorder paths
where they are used. GCC, however, does that aggressively, even in
presence of volatile operands. The most reliable way GCC offers for avoid
instructions reordering is clobbering "memory" even if that is
theoretically an heavy-weight operation, flushing the content of all
the registers and forcing reload of them (We could rely, however, on
gcc DTRT by just understanding the purpose as this is a well-known
pattern for many modern operating-systems).
Not all our memory barriers, right now, clobber memory for GCC-like
compilers. The most notable cases are IA32 and amd64 where the memory
barrier are treacted the same as normal atomic instructions.
Fix this by offering the possibility to implement atomic instructions
with memory barriers separately from the normal version and implement
the GCC-like specific one using memory clobbering.
Thanks to Chris Lattner (@apple) for his discussion on llvm specifics.
Reported by: jhb
Reviewed by: jhb
Tested by: rdivacky, Giovanni Trematerra
<giovanni dot trematerra at gmail dot com>
first and the native ia32 compat as middle (before other things).
o(ld)brandinfo as well as third party like linux, kfreebsd, etc.
stays on SI_ORDER_ANY coming last.
The reason for this is only to make sure that even in case we would
overflow the MAX_BRANDS sized array, the native FreeBSD brandinfo
would still be there and the system would be operational.
Reviewed by: kib
MFC after: 1 month
pmap_invalidate_cache_range() when self-snoop is apparently not reported
in cpu features. We get a reserved trap when clflushing APIC registers
window.
XEN in full system virtualization mode removes self-snoop from CPU
features, making this a problem.
Tested by: csjp
Reviewed by: alc
MFC after: 3 days
are currently two problems with the use of 1GB page mappings by the direct
map. First, at least one device driver uses pmap_extract() rather than
DMAP_TO_PHYS() to translate a direct map address to a physical address.
Unfortunately, neither pmap_extract() nor pmap_kextract() yet support 1GB
page mappings. Second, pmap_bootstrap() needs to interrogate the MTRRs to
ensure that a 1GB page mapping doesn't span two MTRRs of different types.
Reported and tested by: Daniel O'Connor
MFC after: 3 days
devices that we also support, just not by default (thus only LINT or
module builds by default).
While currently there is only "/dev/full" [2], we are planning to see more
in the future. We may decide to change the module/dependency logic in the
future should the list grow too long.
This is not part of linux.ko as also non-linux binaries like kFreeBSD
userland or ports can make use of this as well.
Suggested by: rwatson [1] (name)
Submitted by: ed [2]
Discussed with: markm, ed, rwatson, kib (weeks ago)
Reviewed by: rwatson, brueffer (prev. version)
PR: kern/68961
MFC after: 6 weeks
o introduce PCIE_REGMAX and use it instead of ad-hoc constant
o where 'reg' parameter/variable is not already unsigned, cast it to
unsigned before comparison with maximum value to cut off negative
values
o use PCI_SLOTMAX in several places where 31 or 32 were explicitly used
o drop redundant check of 'bytes' in i386 pciereg_cfgread() - valid
values are already checked in the subsequent switch
Reviewed by: jhb
MFC after: 1 week
startup and genericize it so it can be reused to map other tables as well:
- Add a routine to walk a list of ACPI subtables such as those used in the
APIC and SRAT tables in the MI acpi(4) driver.
- Move the routines for mapping and unmapping an ACPI table as well as
mapping the RSDT or XSDT and searching for a table with a given signature
out into acpica_machdep.c for both amd64 and i386.
amd64 similar to i386. This fixes a bug on amd64 where overlapping
entries would not cause the SMAP parsing to stop.
- Change the SMAP parsing code to do a sorted insertion into physmap[]
instead of an append to support systems with out-of-order SMAP entries.
PR: amd64/138220
Reported by: James R. Van Artsdalen james of jrv org
MFC after: 3 days
then trapsignal is called with ksi.ksi_signo = 0. For debugging kernels,
that should end up in panic, for non-debugging kernels behaviour is
undefined.
Do panic regardeless of execution mode at the moment of trap.
Reviewed by: jhb
MFC after: 1 month
