In timer2sbintime(), calculate the second and fractional second portions of
the sbintime separately. When calculating the the fractional second portion,
use a 64bit multiply to prevent excess truncation. This avoids the ~7% error
in the original conversion for ns, and smaller errors of the same type for us
and ms.
PR: 198139
Reviewed by: jhb
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D5397
The base system libc is only used to run binaries built on FreeBSD 7.0 and
later. It does not need to include system call wrappers for system calls
only used by FreeBSD binaries built on versions older than 7.0. This was
already true for "COMPAT" system calls, but now wrappers for system calls
used on FreeBSD 4 and 6 are excluded as well.
Reviewed by: kib
Differential Revision: https://reviews.freebsd.org/D5597
192.168.1.1, with share "share". This commit fixes a problem
where "mkdir /net/192.168.1.1/share/meh" would return spurious
error instead of creating the directory if the target filesystem
wasn't mounted yet; subsequent attempts would work correctly.
The failure scenario is kind of complicated to explain, but it all
boils down to calling VOP_MKDIR() for the target filesystem (NFS)
with wrong dvp - the autofs vnode instead of the filesystem root
mounted over it.
Reviewed by: kib@
MFC after: 1 month
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D5442
- Mark AIO system calls as STD and remove the helpers to dynamically
register them.
- Use COMPAT6 for the old system calls with the older sigevent instead of
an 'o' prefix.
- Simplify the POSIX configuration to note that AIO is always available.
- Handle AIO in the default VOP_PATHCONF instead of special casing it in
the pathconf() system call. fpathconf() is still hackish.
- Remove freebsd32_aio_cancel() as it just called the native one directly.
Reviewed by: kib
Sponsored by: Chelsio Communications
Differential Revision: https://reviews.freebsd.org/D5589
files format into printfs and errors to caller. Some leaks of
resources are there, but the same leaks are present in other error
pathes. With the change, the kernel at least boots even when module
with unexpected or corrupted ELF structure is preloaded.
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
as SHT_PROGBITS. This is needed after the clang 3.8 import, which
generates that type for .eh_frame section, which had SHT_PROGBITS type
before.
Reported by: Nikolai Lifanov <lifanov@mail.lifanov.com>
PR: 207729
Tested by: dim (previous version)
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
Summary:
The idea behind this is '~0ul' is well-defined, and casting to uintmax_t, on a
32-bit platform, will leave the upper 32 bits as 0. The maximum range of a
resource is 0xFFF.... (all bits of the full type set). By dropping the 'ul'
suffix, C type promotion rules apply, and the sign extension of ~0 on 32 bit
platforms gets it to a type-independent 'unsigned max'.
Reviewed By: cem
Sponsored by: Alex Perez/Inertial Computing
Differential Revision: https://reviews.freebsd.org/D5255
but next invocation is cancelled while migrating,
sleepq_check_timeout() needs to be informed that the callout is
stopped. Otherwise the thread switches off CPU and never become
runnable, since running callout could have already raced with us,
while the migrating and cancelled callout could be one which is
expected to set TDP_TIMOFAIL flag for us. This contradicts with the
expected behaviour of callout_stop() for other callers, which
e.g. decrement references from the callout callbacks.
Add a new flag CS_MIGRBLOCK requesting report of the situation as
'successfully stopped'.
Reviewed by: jhb (previous version)
Tested by: cognet, pho
PR: 200992
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
Differential revision: https://reviews.freebsd.org/D5221
EXT_MOD_TYPE, EXT_DISPOSABLE types we should first execute the free
callback, then free the mbuf, otherwise we will derefernce memory that
was just freed.
Reported and tested: jhibbits
improve cancellation robustness.
Introduce a new file operation, fo_aio_queue, which is responsible for
queueing and completing an asynchronous I/O request for a given file.
The AIO subystem now exports library of routines to manipulate AIO
requests as well as the ability to run a handler function in the
"default" pool of AIO daemons to service a request.
A default implementation for file types which do not include an
fo_aio_queue method queues requests to the "default" pool invoking the
fo_read or fo_write methods as before.
The AIO subsystem permits file types to install a private "cancel"
routine when a request is queued to permit safe dequeueing and cleanup
of cancelled requests.
Sockets now use their own pool of AIO daemons and service per-socket
requests in FIFO order. Socket requests will not block indefinitely
permitting timely cancellation of all requests.
Due to the now-tight coupling of the AIO subsystem with file types,
the AIO subsystem is now a standard part of all kernels. The VFS_AIO
kernel option and aio.ko module are gone.
Many file types may block indefinitely in their fo_read or fo_write
callbacks resulting in a hung AIO daemon. This can result in hung
user processes (when processes attempt to cancel all outstanding
requests during exit) or a hung system. To protect against this, AIO
requests are only permitted for known "safe" files by default. AIO
requests for all file types can be enabled by setting the new
vfs.aio.enable_usafe sysctl to a non-zero value. The AIO tests have
been updated to skip operations on unsafe file types if the sysctl is
zero.
Currently, AIO requests on sockets and raw disks are considered safe
and are enabled by default. aio_mlock() is also enabled by default.
Reviewed by: cem, jilles
Discussed with: kib (earlier version)
Sponsored by: Chelsio Communications
Differential Revision: https://reviews.freebsd.org/D5289
taskqueue_enqueue() was changed to support both fast and non-fast
taskqueues 10 years ago in r154167. It has been a compat shim ever
since. It's time for the compat shim to go.
Submitted by: Howard Su <howard0su@gmail.com>
Reviewed by: sephe
Differential Revision: https://reviews.freebsd.org/D5131
Note that isrc_arg member of struct intr_irqsrc is used only for
INTR_SOLO and IPI filter. This should be remembered if IPI filters
and their arguments will be stored on another place.
This option could be unusable very soon, if interrupt controllers
implementations will not be implemented considering it.
The m_ext.ext_cnt pointer becomes a union. It can now hold the refcount
value itself. To tell that m_ext.ext_flags flag EXT_FLAG_EMBREF is used.
The first mbuf to attach a cluster stores the refcount. The further mbufs
to reference the cluster point at refcount in the first mbuf. The first
mbuf is freed only when the last reference is freed.
The benefit over refcounts stored in separate slabs is that now refcounts
of different, unrelated mbufs do not share a cache line.
For EXT_EXTREF mbufs the zone_ext_refcnt is no longer needed, and m_extadd()
becomes void, making widely used M_EXTADD macro safe.
For EXT_SFBUF mbufs the sf_ext_ref() is removed, which was an optimization
exactly against the cache aliasing problem with regular refcounting.
Discussed with: rrs, rwatson, gnn, hiren, sbruno, np
Reviewed by: rrs
Differential Revision: https://reviews.freebsd.org/D5396
Sponsored by: Netflix
breaking the ABI. Special value is stored in the lock pointer to
indicate shared lock, and offline page in the shared memory is
allocated to store the actual lock.
Reviewed by: vangyzen (previous version)
Discussed with: deischen, emaste, jhb, rwatson,
Martin Simmons <martin@lispworks.com>
Tested by: pho
Sponsored by: The FreeBSD Foundation
the interrupt framework is also going to be used by another (MIPS)
architecture. IPI implementations may vary much across different
architectures.
An IPI implementation should still define INTR_IPI_COUNT and use
intr_ipi_setup_counters() to setup IPI counters which are inside of
intrcnt[] and intrnames[] arrays. Those are used for sysctl and ddb.
Then, intr_ipi_increment_count() should be used to increment obtained
counter.
Reviewed by: imp
Differential Revision: https://reviews.freebsd.org/D5459
- Set td_errno so that ktrace and dtrace can obtain the syscall error
number in the usual way.
- Pass negative error numbers directly to the syscall layer, as they're
not intended to be returned to userland.
Reviewed by: kib
Sponsored by: EMC / Isilon Storage Division
Differential Revision: https://reviews.freebsd.org/D5425
While making CloudABI work well on Linux, I discovered that I had a
FreeBSD-ism in one of my unit tests. The test did the following:
- Create UNIX socket 1, bind it, make it listen.
- Create UNIX socket 2, connect it to UNIX socket 1.
- Close UNIX socket 1.
- Obtain SO_ERROR from socket 2.
On FreeBSD this returns ECONNABORTED, while on Linux it returns
ECONNRESET. I dug through some of the relevant specifications[1] and it
looks like Linux is all right here. ECONNABORTED should only be returned
when the local connection (socket 2) is aborted; not the peer (socket 1).
It is of course slightly misleading: the function in which we set this
error is called uipc_abort(), but keep in mind that we're aborting the
peer, thus resetting the local socket.
[1] http://pubs.opengroup.org/onlinepubs/9699919799/functions/connect.html
Reviewed by: cem
Sponsored by: Nuxi, the Netherlands
Differential Revision: https://reviews.freebsd.org/D5419
the virtvnodes calculation. Include the size of fs-specific v_data as
the nfs nclnode inline, the NFS nclnode is bigger than either ZFS
znode or UFS inode. Include the size of namecache_ts and short cache
path element, multiplied by the name cache population factor, again
inline.
Inline defines are used to avoid pollution of the vnode.h with the
subsystem-private objects. Non-significant unsynchronized changes of
the definitions are fine, we do not care about that precision, and
e.g. ZFS consumes much malloced memory per vnode for reasons
unaccounted in the formula.
Lower the partition of kmem dedicated to vnodes, from 1/7 to 1/10.
The measures reduce vnode cache pressure on kmem and bring the vnode
cache memory use below some apparent thresholds that were exceeded by
r291244 due to more robust vnode reuse.
Reported and tested by: marius (i386, previous version)
Reviewed by: bde
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
This simplifies checking for default resource range for bus_alloc_resource(),
and improves readability.
This is part of, and related to, the migration of rman_res_t from u_long to
uintmax_t.
Discussed with: jhb
Suggested by: marcel
r274560 modified kqueue_register() to only test the event condition if the
corresponding knote is not disabled. However, this check takes place before
the EV_ENABLE flag is used to clear the KN_DISABLED flag on the knote, so
enabling a previously-disabled kevent would not result in a notification for
a triggered event. This change fixes the problem by testing for EV_ENABLED
before possibly checking the event condition.
This change also updates a kqueue regression test to exercise this case.
PR: 206368
Reviewed by: kib
Sponsored by: EMC / Isilon Storage Division
Differential Revision: https://reviews.freebsd.org/D5307
Provide bus_get_bus_tag() for sparc64, powerpc, arm, arm64 and mips
nexus and its children in order to return a platform specific default tag.
This is required to ensure generic correctness of the bus_space tag.
It is especially needed for arches where child bus tag does not match
the parent bus tag. This solves the problem with ppc architecture
where the PCI bus tag differs from parent bus tag which is big-endian.
This commit is a part of the following patch:
https://reviews.freebsd.org/D4879
Submitted by: Marcin Mazurek <mma@semihalf.com>
Obtained from: Semihalf
Sponsored by: Annapurna Labs
Reviewed by: jhibbits, mmel
Differential Revision: https://reviews.freebsd.org/D4879
numbers range.
This effectively skips indirect and extdata blocks on the buffer
queue. Since their logical block numbers are negative, bnoreuselist()
could loop infinitely.
Reported and tested by: pho
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
for all struct bio you get back from g_{new,alloc}_bio. Temporary
bios that you create on the stack or elsewhere should use this before
first use of the bio, and between uses of the bio. At the moment, it
is nothing more than a wrapper around bzero, but that may change in
the future. The wrapper also removes one place where we encode the
size of struct bio in the KBI.
This patch allows the newly imported INTRNG code to be built without necessarily
having FDT support in the kernel. This may be useful for some MIPS platforms
that wish to move to INTRNG, but not to FDT at the same time.
Basically all the code is already within ifdef's where FDT is concerned,
it's just the headers that aren't.
Submitted by: Stanislav Galabov <sgalabov@gmail.com>
Differential Revision: https://reviews.freebsd.org/D5249
mbuf(9) manipulation functions into uipc_mbuf.c. This looks like
the initial intent, but had diffused in the last decade.
o Gather all declarations in mbuf.h in one place and sort them.
o Uninline m_clget() and m_cljget().
There are no functional changes in this patch.
The patch comes from a larger version, where all mbuf(9) allocation was
uninlined, which allowed to make mbuf(9) UMA zones private to kern_mbuf.c.
The performance impact of the total uninlining is still unclear, so we
are holding on now with larger version.
Together with: melifaro, olivier
Kernel threads (and processes) are supposed to call kthread_exit() (or
kproc_exit()) to terminate. However, the kernel includes a fallback in
fork_exit() to force a kthread exit if a kernel thread's "main" routine
returns. This fallback was added back when the kernel only had processes
and was not updated to call kthread_exit() instead of kproc_exit() when
threads were added to the kernel.
This mistake was particular exciting when the errant thread belonged to
proc0. Due to the missing P_KTHREAD flag the fallback did not kick in
and instead tried to return to userland via whatever garbage was in the
trapframe. With P_KTHREAD set it tried to terminate proc0 resulting in
other amusements.
PR: 204999
MFC after: 1 week
All other kernel processes have this flag set and all threads in proc0
(including thread0) have the similar TDP_KTHREAD flag set.
PR: 204999
Submitted by: Oliver Pinter @ HardenedBSD
Reviewed by: kib
MFC after: 1 week
disable compilation of the code which made it possible to call
stop_all_proc() from usermode at all.
Move the comment to the preamble of stop_all_proc() and reword it to
give overview of the function intent.
proc0 has P_HADTHREADS flag set due to kthread_add(), but no
P_KTHREAD, which triggered the assert, which does not serve a purpose
now.
Reported by: Oliver Pinter
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
Although POSIX literally permits failing with [EINVAL] if IPC_CREAT and
IPC_EXCL were both passed, the semaphore set already exists and has fewer
semaphores than nsems, this does not allow an application to retry safely:
if the [EINVAL] is actually because of the semmsl limit, an infinite loop
would result.
PR: 206927
