If we can't find a symbol corresponding to the faulting instruction, assume
that the previously-executed function is a call and attempt to find the
calling function using the return address on the stack. Otherwise we end
up associating the last stack frame with the current call, which is
incorrect and causes the unwinder to skip printing of the calling function,
resulting in a confusing backtrace.
Reviewed by: jhb
Sponsored by: EMC / Isilon Storage Division
Differential Revision: https://reviews.freebsd.org/D2859
Undefined symbols have a value of zero, so it makes no sense to return
such a symbol when performing a lookup by value. This occurs for example
when unwinding the stack after calling a NULL function pointer, and we
confusingly report the faulting function as uart_sab82532_class() on
amd64.
Convert db_print_loc_and_inst() to only attempt disassembly if we managed
to find a symbol corresponding to the IP. Otherwise we may fault and
re-enter the debugger.
Reviewed by: jhb
Sponsored by: EMC / Isilon Storage Division
Differential Revision: https://reviews.freebsd.org/D2858
The amd64 port copied some code from i386 to fetch function arguments and
display them in backtraces. However, it was commented out and can't easily
be implemented since the function arguments are passed in
registers rather than on the stack in amd64. Remove it in preparation for
some bug fixes in this area.
Reviewed by: jhb
Sponsored by: EMC / Isilon Storage Division
Differential Revision: https://reviews.freebsd.org/D2857
done by the functions called on other CPUs, are visible to the caller.
Pair otherwise useless acquire on smp_rv_waiters[3] with a release add
to ensure synchronized with relation, which guarantees visibility.
Reviewed by: alc
Sponsored by: The FreeBSD Foundation
MFC after: 3 weeks
- Add required MAC/VLAN filter when adding an LAA
- Fix bug where code did not check for I40E_SUCCESS from a successful
i40e_validate_mac_address() call in ixl_init_locked(), when setting
an LAA.
PR: 201240
Differential Revision: https://reviews.freebsd.org/D3111
Submitted by: Gregory Rose <gregory.v.rose@intel.com>
Reviewed by: gnn, rstone
Approved by: gnn
MFC after: 2 weeks
The NVMe specification has no ability to specify a maximum delete size
that is less than the full capacity of the namespace - so just using the
namespace size is the correct value here.
This fixes reported issues where ZFS trim on init looked like it was
hanging the system - previously the default I/O max size (128KB on
Intel NVMe controllers) was used for delete operations which worked out
to only about 8MB/s. With this patch I can add an 800GB DC P3700
drive to a ZFS pool in about 15-20 seconds.
Reported by: Dylan Just <dylan@techtangents.com>
MFC after: 3 days
Sponsored by: Intel
This feature is inspired by another Unix-alike OS commonly found on
airplane headrests.
A number of beasties[0] are drawn at top of framebuffer during boot,
based on the number of active SMP CPUs[1]. Console buffer output
continues to scroll in the screen area below beastie(s)[2].
After some time[3] has passed, the beasties are erased leaving the
entire terminal for use.
Includes two 80x80 vga16 beastie graphics and an 80x80 vga16 orb
graphic. (The graphics are RLE compressed to save some space -- 3x 3200
bytes uncompressed, or 4208 compressed.)
[0]: The user may select the style of beastie with
kern.vt.splash_cpu_style=(0|1|2)
[1]: Or the number may be overridden with tunable kern.vt.splash_ncpu.
[2]: https://www.youtube.com/watch?v=UP2jizfr3_o
[3]: Configurable with kern.vt.splash_cpu_duration (seconds, def. 10).
Differential Revision: https://reviews.freebsd.org/D2181
Reviewed by: dumbbell, emaste
Approved by: markj (mentor)
MFC after: 2 weeks
Explicitly mark existing VT_SYSCTL_INTs static. This is in preparation for
D2181.
Reviewed by: dumbbell, emaste
Approved by: markj (mentor)
MFC after: 1 week
Add brief commentary to vendor-specific devid function in ITS
and remove redundant spaces by the way.
Obtained from: Semihalf
Sponsored by: The FreeBSD Foundation
malloc() should not go to sleep in case of lack of resource while
the kernel thread is holding a non-sleepable lock.
- change malloc() flags to M_NOWAIT in such cases implement
lpi_free_chunk() routine as it will be needed when ITT
allocation fails in its_device_alloc_locked()
- do not increase verbosity of this code since upper layers will
communicate an error if the interrupt setup fails
Obtained from: Semihalf
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D3121
Though the standard C library uses a 'struct timespec' using a 64-bit
'time_t', there is no need to use such a type at the system call level.
CloudABI uses a simple 64-bit unsigned timestamp in nanoseconds. This is
sufficient to express any time value from 1970 to 2554.
The CloudABI low-level interface also supports fetching timestamp values
with a lower precision. Instead of overloading the clock ID argument for
this purpose, the system call provides a precision argument that may be
used to specify the maximum slack. The current system call
implementation does not use this information, but it's good to already
have this available.
Expose cloudabi_convert_timespec(), as we're going to need this for
fstat() as well.
Obtained from: https://github.com/NuxiNL/freebsd
It is possible that some HW will use different PCI devids,
hence allow to replace the default domain🚌slot:func schema
by implementing and registering custom function.
Obtained from: Semihalf
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D3118
it_need was wrong [*]. Restore the releases and add a comment
explaining why it is needed.
Noted by: alc [*]
Reviewed by: bde [*]
Sponsored by: The FreeBSD Foundation
Use Vritual Counter register associated with Generic Timer to
read the cyclecount.
Obtained from: Semihalf
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D3134
Summary:
Remove the stub system call that was put in place during the system call
import and replace it by a target-dependent version stored in sys/amd64.
Initialize the thread in a way similar to cpu_set_upcall_kse(). We
provide the entry point with two arguments: the thread ID and the
argument pointer.
Test Plan:
Thread creation still seems to work, both for FreeBSD and CloudABI
binaries.
Reviewers: dchagin, mjg, kib
Reviewed By: kib
Subscribers: imp
Differential Revision: https://reviews.freebsd.org/D3110
Add a method to identify CPU based on RAW MIDR value.
Obtained from: Semihalf
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D3117
According to the last(1) man page, the "reboot" pseudo-user should print
all system reboot entries. This got broken by the utmpx import, as
records are typed.
Re-add support for "last reboot" by specifically matching against
SHUTDOWN_TIME and BOOT_TIME records.
PR: 168844
Submitted by: matthew@
MFC after: 1 month
lock on the INP before calling the tunnel protocol, else a LOR
may occur (it does with SCTP for sure). Instead we must acquire a
ref count and release the lock, taking care to allow for the case
where the UDP socket has gone away and *not* unlocking since the
refcnt decrement on the inp will do the unlock in that case.
Reviewed by: tuexen
MFC after: 3 weeks
* Add whitespace trimming to some fields (username, group, size, inode, blocks) to avoid whitespace in JSON strings
* fix -m mode, was invalid JSON (repeated keys), and was missing outer array container
* in -n mode, numeric uids and gids were returned as strings
Approved by: eadler (mentor)
Sponsored by: ScaleEngine Inc.
Differential Revision: https://reviews.freebsd.org/D2854
- pkg(8) cannot be removed before subsequent reinvocations
- The PKG_CACHEDIR cannot be cleaned after the repo*.sqlite
has been removed
- pkg(8) cannot be removed as a precursor to any of the other
steps involved here
MFC after: 3 days
X-MFC-With: r285722
X-MFC-Before: 10.2-{BETA3,RC1} (whichever happens next)
Sponsored by: The FreeBSD Foundation
Fix a warning triggered by the gcc + FORTIFY_SOURCE patches:
In function 'libusb20_parse_config_desc': lib/libusb/libusb20_desc.c:141:
warning: passing argument 1 of 'memcpy' discards qualifiers from pointer
target type
Submitted by: hselansky
Just like FreeBSD+Capsicum, CloudABI uses process descriptors. Return
the file descriptor number to the parent process.
To the child process we both return a special value for the file
descriptor number (CLOUDABI_PROCESS_CHILD). We also return the thread ID
of the new thread in the copied process, so the threading library can
reinitialize itself.
Obtained from: https://github.com/NuxiNL/freebsd
This change refactors the existing create_thread() function to be more
generic. It replaces almost all of its arguments by a callback that can
be used to extract the thread ID and copy it out to the right place, but
also to perform additional initialization steps, such as setting the
trapframe. This also makes the difference between thr_new() and
thr_create() more clear in my opinion.
This function is going to be used by the CloudABI compatibility layer.
It looks like the OpenSolaris compatibility framework already provides a
function called thread_create(). Rename this function to
do_thread_create() and use a macro to deal with the namespacing
conflict. A similar approach is already used for thread_exit().
MFC after: 1 month
in lockstat.ko. This means that lockstat probes now have typed arguments and
will utilize SDT probe hot-patching support when it arrives.
Reviewed by: gnn
Differential Revision: https://reviews.freebsd.org/D2993
