thread started and incremented the stat_flush_threads [1].
Unconditionally wakeup softdep_flush threads when needed, do not try
to check wchan, which is racy and breaks abstraction.
Reported by and discussed with: glebius, neel
Tested by: pho
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
descriptor or free the memory before returning.
Submitted by: Mariusz Zaborski <oshogbo@FreeBSD.org>
While here, protect errno, so it won't be overwritted by close(2) or free(3).
sys/cam/scsi/scsi_all.h:
In struct scsi_extended_inquiry_data:
- Increase the length field to 2 bytes, as it is 2 bytes in SPC-4.
- Add bit definitions for the various Activiate Microcode actions.
- Add the Sequential Access Logical Block Protection support bit,
since we need that in the sa(4) driver. (For modifications
that will come later.)
- Add definitions for the various Multi I_T Nexus Microcode
Download modes.
sys/cam/ctl/ctl.c:
As of SPC-4, a single report of "REPORTED LUNS DATA HAS CHANGED"
is to be given per I_T nexus. Once it is reported, the unit
attention condition should be cleared for all LUNS attached to
an I_T nexus.
Previously that only happened when a REPORT LUNS command was
processed.
This behavior may be different (according to SAM-5) when the
UA_INTLCK_CTRL bits are non-zero in the control mode page but
CTL does not currently support that.
So, in view of the spec, whenever we report a LUN inventory
change unit attention, clear it on all LUNs for that
particular I_T nexus.
Add a new function, ctl_clear_ua() that will clear a unit
attention on all LUNs for the given I_T nexus.
One field in the extended inquiry data that we could potentially
report at some point is the maximum supported sense data length.
To do that, we would the SIM to report (via path inquiry
perhaps) how much sense data it is able to send.
Add comments to explain some of the bits that are set in the
Extended Inquiry VPD page.
Add a few comments to make it more clear which functions handle
various VPD pages.
Sponsored by: Spectra Logic
MFC after: 1 week
which causes dtrace(1) to run the C preprocessor on input scripts before
executing them. Suppress some warnings emitted by the preprocessor which are
confusing the DTrace lexer tests.
MFC after: 1 week
This option allows for specifying the directory to use as the location for
kernel source files. This option was ported from NetBSD.
GitHub Pull Request: https://github.com/freebsd/freebsd/pull/18
Submitted by: Steve Kiernan <stevek@juniper.net>, Simon Gerraty <sjg@juniper.net>
Obtained from: Juniper Networks, Inc.
Reviewed by: imp
Differential Revision: https://reviews.freebsd.org/D1722
Relnotes: yes
P-state but not C-state invariant TSC by changing the default behavior
to leaving the TSC enabled as the timecounter and disabling C2+ instead
of disabling the TSC by default.
Discussed with: jkim
Tested by: Jan Kokemuller <jan.kokemueller@gmail.com>
Add separate software Tx queue limit for non-TCP traffic to make total
limit higher and avoid local drops of TCP packets because of no
backpressure.
There is no point to make non-TCP limit high since without backpressure
UDP stream easily overflows any sensible limit.
Split early drops statistics since it is better to have separate counter
for each drop reason to make it unabmiguous.
Add software Tx queue high watermark. The information is very useful to
understand how big queues grow under traffic load.
Sponsored by: Solarflare Communications, Inc.
Approved by: gnn (mentor)
Most likely is was just memory leak on the error handling path since
typically efsys_mem_t is filled in by zeros on allocation.
Sponsored by: Solarflare Communications, Inc.
Approved by: gnn (mentor)
sfxge_dma_alloc() calls bus_dmamem_alloc() with BUS_DMA_ZERO flag, so
allocated memory is already filled in by zeros
Sponsored by: Solarflare Communications, Inc.
Approved by: gnn (mentor)
Remove the first member alignment to cacheline since it is nop.
Use __aligned() for the whole structure to make sure that the structure
size is cacheline aligned.
Remove lock alignment to make the structure smaller and fit all members
used on event queue processing into one cacheline (128 bytes) on x86-64.
The lock is obtained as well from different context when event queue
statistics are retrived from sysctl context, but it is infrequent.
Reorder members to avoid padding and go in usage order on event
processing.
As the result all structure members used on event queue processing fit
into exactly one cacheline (128 byte) now.
Sponsored by: Solarflare Communications, Inc.
Approved by: gnn (mentor)
In fact the pointer is used only if more than one TXQ is processed in
one interrupt.
It is used (read-write) on completion path only.
Also it makes the first part of the structure smaller and it fits now
into one 128byte cache line. So, TXQ structure becomes 128 bytes smaller.
Sponsored by: Solarflare Communications, Inc.
Approved by: gnn (mentor)
string.
With this change it is not necessary redeclare the driver relations with
gpiobus and gpioc.
This also prevents redundant declarations when gpiobusvar.h is included
(which is going to happen soon).
It seems GAS makes the substitution automatically, but Clang's
integrated assembler does not (yet). It fails with "invalid operand for
instruction."
Reported by: sbruno
Minimum LCDC is 2 so clock freq shouild be 2*max_pixel_clock. Maximum pixel
clock for HDMI is 148500 (1920x1080). But AM335x can not run in this mode
due to bandwidth and clock limitations
