closing a window where a file system using softupdates could be async
for a short while if both MNT_UPDATE and MNT_ASYNC were passed as flags
to nmount(). Add MNTK_SOFTDEP flag to ensure that softdep_mount()
doesn't increase mnt_noasync multiple times.
sync() and sync_fsync() without losing MNT_ASYNC. Add MNTK_ASYNC flag
which is set only when MNT_ASYNC is set and mnt_noasync is zero, and
check that flag instead of MNT_ASYNC before initiating async io.
the VRRPv2 advertisements will originate from the wrong source address.
This only affects kernels compiled with MROUTING and after the MRT_INIT
ioctl() has been issued.
Set imo_multicast_vif in carp's softc to the invalid value -1 after it is
zeroed by softc allocation, to stop the ip_output() path looking up the
incorrect source address thinking a vif is set.
PR: kern/100532
Submitted by: Bohus Plucinsky
MFC after: 1 week
written to the audit trail file:
- audit_record_write() now returns void, and all file system specific
error handling occurs inside this function. This pushes error handling
complexity out of the record demux routine that hands off to both the
trail and audit pipes, and makes trail behavior more consistent with
pipes as a record destination.
- Rate limit kernel printfs associated with running low on space. Rate
limit audit triggers for low space. Rate limit printfs for fail stop
events. Rate limit audit worker write error printfs.
- Document in detail the types of limits and space checks we perform, and
combine common cases.
This improves the audit subsystems tolerance to low space conditions by
avoiding toasting the console with printfs are waking up the audit daemon
continuously.
MFC after: 3 days
Obtained from: TrustedBSD Project
programs to find out exactly which events were registered and which were
returned... This should be lower in kern_kevent, but that would require
special munging due to locks and the functions used to copyin/copyout
kevents...
If someone wants to teach ktrace how to output pretty kevents, I have a
kevent prety printer that can be used...
The goal was to sync with the OSSv4 API 4Front Technologies uses in their
proprietary OSS driver. This was successful as far as possible. The part
of the API which is stable is implemented, for the rest there are some
stubs already.
New system ioctls:
- SNDCTL_SYSINFO - obtain audio system info (version, # of audio/midi/
mixer devices, etc.)
- SNDCTL_AUDIOINFO - fetch details about a specific audio device
- SNDCTL_MIXERINFO - fetch details about a specific mixer device
New audio ioctls:
- Sync groups (SNDCTL_DSP_SYNCGROUP/SNDCTL_DSP_SYNCSTART) which allow
triggered playback/recording on multiple devices (even across processes
simultaneously).
- Peak meters (SNDCTL_DSP_GETIPEAKS/SNDCTL_DSP_GETOPEAKS) - can query
audio drivers for peak levels (needs driver support, disabled for now).
- Per channel playback/recording levels -
SNDCTL_DSP_{GET,SET}{PLAY,REC}VOL. Note that these are still in name
only, just wrapping around the AC97-style mixer at the moment. The next
step is to push them down to the drivers.
Audio ioctls still under development by 4Front (for which stubs may exist
in this commit):
- SNDCTL_GETNAME, SNDCTL_{GET,SET}{SONG,LABEL}
- SNDCTL_DSP_{GET,SET}_CHNORDER
- SNDCTL_MIX_ENUMINFO, SNDCTL_MIX_EXTINFO - (might be documented enough in
the OSS releases to work on this. These ioctls cover the cool "twiddle
any knob on your card" features.)
Missing:
- SNDCTL_DSP_COOKEDMODE -- this ioctl is used to give applications direct
access to a card's buffers, bypassing the feeder architecture. It's
a toughy -- "someone" needs to decide :
(a) if this is desireable, and (b) if it's reasonably feasible.
Updates for driver writers:
So far, only two routines to the channel class (in channel_if.m) are added.
One is for fetching a list of discrete supported playback/recording rates
of a channel, and the other is for fetching peak level info (useful for
drawing peak meters). Interested parties may want to help pushing down
SNDCTL_DSP_{GET,SET}{PLAY,REC}VOL into the drivers.
To use the new stuff you need to rebuild the sound drivers or your kernel
(depending on if you use modules or not) and to install soundcard.h (a
buildworld/installworld handles this).
Sponsored by: Google SoC 2006
Submitted by: ryanb
Many thanks to: 4Front Technologies for their cooperation, explanations
and the nice license of their soundcard.h.
- Linux returns ENOPROTOOPT in a case of not supported opt to setsockopt.
- Return EISDIR in pread() when arg is a directory.
- Return EINVAL instead of EFAULT when namelen is not correct in accept().
- Return EINVAL instead of EACCESS if invalid access mode is entered in
access().
- Return EINVAL instead of EADDRNOTAVAIL in a case of bad salen param
to bind().
Submitted by: rdivacky
Tested with: LTP (vfork01 fails now, but it seems to be a race and
not caused by those changes)
MFC after: 1 week
the header field for possible later IPSEC SPD lookup, even
when the kernel is built without 'options INET6'.
PR: kern/57760
MFC after: 1 week
Submitted by: Joachim Schueth
you can't call tty_clone afterwords. OpenBSD and NetBSD both fail the
open call in that case, so we should do so as well. This can
be done in ctty_clone by returning with *dev==NULL. Admittedly this
causes open to return ENOENT, instead of ENXIO as on the other BSDs,
but this way requires the least touching of code.
Submitted by: Nate Eldredge <nge@cs.hmc.edu>
PR: 83375
MFC: 1 week
GDT to be loaded into FS.base and GS.base, these values of course
are not the values set by sysarch() with I386_SET_FSBASE and
I386_SET_GSBASE, the change fixed a crash for 32bit libthr after
signal handler returned and normal code is accessing thread pointer,
for example: movl %gs:8, %eax.
- Split out the communication protocols into their own files and use
a couple of function pointers in the softc that the commuication
protocols setup in their own attach routine.
- Add support for the SSIF interface (talking to IPMI over SMBus).
- Add an ACPI attachment.
- Add a PCI attachment that attaches to devices with the IPMI interface
subclass.
- Split the ISA attachment out into its own file: ipmi_isa.c.
- Change the code to probe the SMBIOS table for an IPMI entry to just use
pmap_mapbios() to map the table in rather than trying to setup a fake
resource on an isa device and then activating the resource to map in the
table.
- Make bus attachments leaner by adding attach functions for each
communication interface (ipmi_kcs_attach(), ipmi_smic_attach(), etc.)
that setup per-interface data.
- Formalize the model used by the driver to handle requests by adding an
explicit struct ipmi_request object that holds the state of a given
request and reply for the entire lifetime of the request. By bundling
the request into an object, it is easier to add retry logic to the various
communication backends (as well as eventually support BT mode which uses
a slightly different message format than KCS, SMIC, and SSIF).
- Add a per-softc lock and remove D_NEEDGIANT as the driver is now MPSAFE.
- Add 32-bit compatibility ioctl shims so you can use a 32-bit ipmitool
on FreeBSD/amd64.
- Add ipmi(4) to i386 and amd64 NOTES.
Submitted by: ambrisko (large portions of 2 and 3)
Sponsored by: IronPort Systems, Yahoo!
MFC after: 6 days
packets. Reimplement this correctly and use a sysctl that defaults to off so
the user doesnt get any suprises if ipfw blocks the ARP packet.
MFC after: 3 days
the entire record when a non-data mbuf is removed in the soreceive() path.
This only triggers a panic directly when compiled with INVARIANTS.
PR: 38495
Submitted by: James Juran
MFC after: 1 week
