mirror/freebsd
1
0
Fork 0
mirror of https://git.FreeBSD.org/src.git synced 2024-12-17 10:26:15 +00:00
Code Issues Releases Activity
46,235 Commits 339 Branches 3,553 Tags 2 GiB
2394baefd8
Commit Graph

1293 Commits

Author SHA1 Message Date
Bill Fumerola
2394baefd8 'driver support' -> 'driver supports' 2000-02-29 10:02:29 +00:00
Matt Jacob
2e56bc770d Clean up defines for correct 12160/1080 exclusion. Final 4.0. 
approved: JKH
 2000-02-29 05:48:46 +00:00
Bruce Evans
71c458de9d Fixed configuration of fast interrupts for the pci cy driver. They were 
an early newbus casualty.  The fix in rev.1.28 didn't work because the
most important part of it used a wrong macro name.

Approved by:	jkh
 2000-02-28 08:12:24 +00:00
Poul-Henning Kamp
90a822243f Implement queue-limiting based on bandwidth. 
Approved by:	jkh
 2000-02-26 18:28:24 +00:00
Bill Fumerola
bebfe1cadb o No need to print the vendor/device ID for things that matched succesfully. 
o ``<device name>'' versus ``device name'' for things that fall under nomatch.

Reviewed by:	dfr (in principle)
Approved by:	Baron von Hubbard
 2000-02-22 21:44:39 +00:00
Bill Fumerola
a91df2ff09 Add the ESS Maestro and the ATI Mobility-1 to the generic chip match and 
the vga match (respectivly, though they aren't much different anymore..)

These can be found on newer Dell laptops.

Approved by: Sir Hubbard
 2000-02-21 21:46:19 +00:00
Nick Hibma
5e78bf3190 Move the warning on wrong IRQ values to the right place, before any 
resource allocation is attempted.

It will present the user with a message that he has to switch on USB
support in his BIOS.
 2000-02-20 14:22:44 +00:00
Doug Rabson
6874d62958 Remove the vga-pci driver. It serves no purpose and it hides the hardware 
from useful drivers such as the 3D DRI drivers I will be porting for
hardware accelerated OpenGL. The hardware will still be reported during
boot using the nomatch system.

Approved by: jkh
 2000-02-19 09:44:06 +00:00
Warner Losh
e6157956d2 Add the VIA 82C596B PCI ISA south bridge on my ASUS P3V133. 
Approved by: jkh
 2000-02-17 06:12:16 +00:00
Matt Jacob
af077239b6 Include the file that defines PCIM_CMD_BUSMASTEREN. 2000-02-16 02:22:37 +00:00
Mike Smith
7af42aebc4 Ensure that the busmaster enable bit is set; we can't assume that all 
BIOS code will get this right (and some certainly doesn't).

Submitted by:	W. Gerald Hicks <jhix@mindspring.com>
Approved by:	jkh
 2000-02-16 01:12:09 +00:00
Matt Jacob
e142669a43 If the CDB length is greater than 12 for parallel SCSI, ispscsicmd has 
made the initial queue entry a EXTENDED CMD queue entry, so we have to
go straight to continuation segments for any data segments.

approved: jkh
 2000-02-15 00:50:01 +00:00
Peter Wemm
be6ccf3f6c Do a trivial conversion of xrpu to newbus. 
Reviewed by:	phk  ("commit it!" :-)
Pre-Approved by: jkh
 2000-02-12 07:56:44 +00:00
Matt Jacob
960f6939af Add in 12160 (Ultra3) support. Redo things to use the newbus code. 
Approved: jkh@freebsd.org

PR:		16141
 2000-02-11 19:45:17 +00:00
Bill Paul
74ea2d6f60 Update the Tigon driver to use the 12.3.18 firmware release from Alteon. 
(No changes to the driver code itself.)

Approved by: jkh
 2000-02-10 00:37:48 +00:00
Matthew N. Dodd
d00d79c12c Remove the old copy of this file. It is now active in its new location. 
Implicit Approval by:	 jkh
 2000-02-09 04:18:41 +00:00
Nick Hibma
4f2e8d6383 Add PCI Id's for i810 chipsets. 
PR:		16517
Submitted by:	SAKIYAMA Nobuo <sakichan@lares.dti.ne.jp>
Approved by:	jhk
 2000-02-07 12:50:33 +00:00
Nick Hibma
ef4da90333 Disable the generation of SMIs (System Management Interrupts). Always set 
the PIRQD bit.

This fixes the problem of uhub0 hanging forever during boot when USB
keyboard support is switched on in the BIOS on motherboards with Intel
chipsets (UHCI).

Approved by:	The Sheep
 2000-02-06 14:52:27 +00:00
Nick Hibma
b70b9ce019 Commit missing bits, forgotten when committing support for suspend/resume 
for USB.

Call uhci_power when suspending and resuming.

Approved by: The One.
 2000-02-04 10:18:37 +00:00
Peter Wemm
872309ccd4 Update the pci->pcic compatability module to newbus. This is a simple 
conversion to eliminate the compatability shims without making any
significant changes.  This eliminates the shim warnings.

Obtained from:	n_himba (tweaked by me, don't blame him for this)
Approved by:	jkh
 2000-02-02 16:49:21 +00:00
Peter Wemm
483df2dd3b Spell "pci_delete_resource" correctly. 
Approved by:	jkh (who must be very sick of requests now :-)
 2000-02-01 18:02:12 +00:00
Nick Hibma
9a69e6509a bus_release_resource is spellt like bus_release_resource not like 
bus_delete_resource.

Fixes a problem when the probe succeeded, but the attach failed. The
release of the resources was done inproperly.

Approved by:	jkh
 2000-01-31 14:05:21 +00:00
Peter Wemm
269a49497f Remove #include "wd.h" and #if NWDC > 0 as that's always true as this 
file is 'optional wdc'  (note wd.h has both NWDC and NWD in it because
of config quirks)
 2000-01-29 16:59:53 +00:00
Peter Wemm
cebf86fa3f Put a FYI in the compatability shims so that people are aware that they 
are using an old unconverted driver.  Most (if not all) of the drivers
for common hardware are newbus these days.  However, we don't want
to encourage people to take the easy way out and write new drivers
using the shims.  This is just passive "encouragement".

Reviewed by:	phk
 2000-01-29 15:37:36 +00:00
Kazutaka YOKOTA
6c94c9a4f7 Add more PCI VGA graphics card descriptions. 
PR: 10095, 15299, 13850, 16356
Submitted by:  Alex Zepeda, Vladimir Kushnir, Alex Vasylenko, Alex.
Obtained from: XFree86 and NetBSD
 2000-01-27 12:02:06 +00:00
Nick Hibma
2aff98945c Properly teardown the allocated and initialised stuff when an error 
occurs (OHCIwas already done for UHCI).

Get rid of the usbus variable. It is confusing.

Align uhci_pci.c and ohci_pci.c again.
 2000-01-26 10:52:27 +00:00
Nick Hibma
9e2bdb4369 Don't set ivars until we checked the return value from device_add_child. 2000-01-26 10:27:12 +00:00
Matt Jacob
8dc7582ba5 put things in place for jumbograms 2000-01-25 06:09:53 +00:00
Matt Jacob
110bbc0dcf define jumbo packet size 2000-01-25 04:11:33 +00:00
Bill Paul
f43d9309a5 Add support for DM9102A boards with Davicom DM9801 HomePNA PHYs. 2000-01-24 17:19:37 +00:00
Peter Wemm
fe8140cd15 Fix some warnings. 2000-01-23 19:27:11 +00:00
Gerard Roudier
4f6c691377 Add 53C895A and 53C1510D device description to the ncr chip table. 2000-01-23 12:27:49 +00:00
Matt Jacob
1d575e0fd3 Correctly put the place to mark EOP where we actually do the packet 
transmission- this handles the odd and rare case of a list terminating
with a zero length mbuf.
 2000-01-23 03:19:49 +00:00
Matt Jacob
1c3c868623 add PREVIOUS index macro for transmit side 2000-01-23 03:18:14 +00:00
Matt Jacob
4931a540da Remove some debugging code, replace one line that had spaces with tabs, 
and fix a silly botch for reinit.
 2000-01-23 02:07:31 +00:00
Matt Jacob
6d918197cd Get rid of the WX_XMIT_SMALL code- we've fixed that problem. Restructure 
the receive code so that it correctly chains receive descriptors together
and handles the case that only a part of a packet is done at the time
we get here.
 2000-01-23 01:49:11 +00:00
Matt Jacob
c792f629d8 Add a pointer in the softc that will point to partially received packet. 
Set up index increments for receive descriptors based on whether
the PADDED_CELL define is set.
 2000-01-23 01:41:17 +00:00
Matt Jacob
e2e6935a6f Add in a define for the optimal cache line size. 2000-01-23 01:39:13 +00:00
Nick Hibma
bd7bdb532c Add ID for the AMD-756 OHCI controller 2000-01-21 10:46:29 +00:00
Nick Hibma
5fa5aeec53 Properly remove interrupts if initialisation fails. 2000-01-20 21:36:07 +00:00
Bill Paul
88d739dc5f Add support for the Davicom DM9102A 10/100 ethernet controller chip. 
This is just to make sure we initialize the chip correctly: we need to
make the sure the port select bit in CSR6 is set properly so that we
use the internal PHY for 10/100 support. (The eval boards I have also
include an external HomePNA PHY, but I need to play with that more
before I can support it.)
 2000-01-19 19:03:08 +00:00
Matt Jacob
a5d8019e08 add a R_PREV_IDX macro 2000-01-18 01:42:11 +00:00
Bill Paul
b822a5eae9 Add the vendor/device ID for the Farallon PN9000SX gigabit ethernet 
card, which is apparently also a Tigon 2 device.
 2000-01-18 00:26:29 +00:00
Bill Paul
09bc5c209e Fix the tl driver so it doesn't run off the end of the RX descriptor list 
and panic in out of mbufs condition.
 2000-01-15 20:14:49 +00:00
Matt Jacob
003a310f5f Remove compile warning not seen when compiling with target mode enabled. 2000-01-15 07:06:44 +00:00
Matt Jacob
65b024e1bf Redo FC target mode dma routine to try and generate an extra CTIO 
in the not so odd case of Moving Data *AND* Sending Status in last CTIO *AND*
status is a CHECK CONDITION *AND* we have Sense Data to send.
 2000-01-15 01:54:36 +00:00
Peter Wemm
c5191a983c Pre 4.0 tidy up. 
Collect together the components of several drivers and export eisa from
the i386-only area (It's not, it's on some alphas too).  The code hasn't
been updated to work on the Alpha yet, but that can come later.

Repository copies were done a while ago.
Moving these now keeps them in consistant place across the 4.x series
as the newbusification progresses.

Submitted by:   mdodd
 2000-01-14 07:14:17 +00:00
Justin T. Gibbs
9bfb3cb2c7 The error status for a scsi status error is "CAM_SCSI_STATUS_ERROR", not 0. 2000-01-14 03:39:30 +00:00
Peter Wemm
101c72e44b Remove duplicate DEC 21050 PCI-PCI bridge (0x00011011) 
Add an entry for the Toshiba Fast Infra Red controller (0x07011179)
 2000-01-13 08:40:10 +00:00
Matthew N. Dodd
69eae97a91 Add a few devices IDs and clarify the SiS 85c496 entry. 2000-01-13 08:01:53 +00:00