1
0
mirror of https://git.FreeBSD.org/src.git synced 2024-12-17 10:26:15 +00:00
Commit Graph

52 Commits

Author SHA1 Message Date
Marcel Moolenaar
26502503e5 Further cleanup <machine/cpu.h> and <machine/md_var.h>: move the MI
prototypes of cpu_halt(), cpu_reset() and swi_vm() from md_var.h to
cpu.h. This affects db_command.c and kern_shutdown.c.

ia64: move all MD prototypes from cpu.h to md_var.h. This affects
madt.c, interrupt.c and mp_machdep.c. Remove is_physical_memory().
It's not used (vm_machdep.c).

alpha: the MD prototypes have been left in cpu.h with a comment
that they should be there. Moving them is left for later. It was
expected that the impact would be significant enough to be done in
a seperate commit.

powerpc: MD prototypes left in cpu.h. Comment added.

Suggested by: bde
Tested with: make universe (pc98 incomplete)
2003-08-16 16:57:57 +00:00
John Baldwin
1e16f6098b Add a one-shot callout facility to db_printf() that executes the registered
callout when a specified number of lines have been output.  This can be
used to implement pagers for ddb commands that output a lot of text.  A
simple paging function is included that automatically rearms itself when
fired.

Reviewed by:	bde, julian
2003-07-31 17:27:52 +00:00
David E. O'Brien
753960f7c4 Use __FBSDID(). 2003-06-10 22:09:23 +00:00
Poul-Henning Kamp
04361c8c3a Make "where" an alias for "trace" 2003-06-01 09:06:23 +00:00
Poul-Henning Kamp
029f0b69a4 Change "dev_t gdbdev" to "void *gdb_arg", some possible paths for GDB
will not have a dev_t.
2003-02-16 19:22:21 +00:00
Julian Elischer
93a7aa79d6 Add code to ddb to allow backtracing an arbitrary thread.
(show thread {address})

Remove the IDLE kse state and replace it with a change in
the way threads sahre KSEs. Every KSE now has a thread, which is
considered its "owner" however a KSE may also be lent to other
threads in the same group to allow completion of in-kernel work.
n this case the owner remains the same and the KSE will revert to the
owner when the other work has been completed.

All creations of upcalls etc. is now done from
kse_reassign() which in turn is called from mi_switch or
thread_exit(). This means that special code can be removed from
msleep() and cv_wait().

kse_release() does not leave a KSE with no thread any more but
converts the existing thread into teh KSE's owner, and sets it up
for doing an upcall. It is just inhibitted from being scheduled until
there is some reason to do an upcall.

Remove all trace of the kse_idle queue since it is no-longer needed.
"Idle" KSEs are now on the loanable queue.
2002-12-28 01:23:07 +00:00
Poul-Henning Kamp
c2476fafad Indentation indicates missing braces.
Spotted by:	FlexeLint
2002-10-01 21:59:46 +00:00
Mark Murray
bda9921d3f Constify to kill some warnings. 2002-09-21 17:29:36 +00:00
Bruce Evans
763df83622 Fixed some style bugs in the removal of __P(()). Continuation lines
were not outdented to preserve non-KNF lining up of code with parentheses.
Switch to KNF formatting.
2002-03-23 11:53:03 +00:00
Alfred Perlstein
14e10f9952 Remove __P. 2002-03-20 05:14:42 +00:00
Matt Jacob
e30e3e9e48 pid is 'long' on alpha. 2002-01-17 02:14:44 +00:00
Dima Dorfman
19d2c78f34 Implement a "kill" DDB command which is an interface to psignal() that
respects locks.  Before SMPng, one was able to call psignal()
using the "call" command, but this is no longer possible because it
does not respect locks by itself.  This is very useful when one has
gotten their machine into a state where it is impossible to spawn
ps/kill or su to root.

In this case, respecting locks essentially means trying to aquire the
proc lock before calling psignal().  We can't block in the debugger,
so if trylock fails, the operation fails.  This also means that we
can't use pfind(), since that will attempt to lock the process for us.

Reviewed by:	jhb
2001-11-27 19:56:28 +00:00
Andrew R. Reiter
99b95aa20b - Include machine/md_var.h to get rid of cpu_reset() warning. (-Wall)
Approved by: jhb
2001-11-05 21:50:55 +00:00
Peter Wemm
5370c3b634 Add a 'reset' command. This is useful for panics really early before
any symbols are loaded.  Especially for unattended machines.
2001-11-03 04:55:48 +00:00
Kris Kennaway
58d9a05948 Quiet a variable format-string warning.
MFC after:	1 week
2001-07-19 02:05:00 +00:00
Brian S. Dean
17bbfb5897 Add 'hwatch' and 'dhwatch' ddb commands analogous to 'watch' and
'dwatch'.  The new commands install hardware watchpoints if supported
by the architecture and if there are enough registers to cover the
desired memory area.

No objection by: audit@, hackers@

MFC after: 2 weeks
2001-07-11 03:15:25 +00:00
Julian Elischer
0b1ae8097d A set of changes to reduce the number of include files the kernel
takes from /usr/include. I cannot check them on alpha.. (will try beast)

Briefly looked at by: Warner Losh <imp@harmony.village.org>
2001-07-08 04:56:07 +00:00
Peter Wemm
f41325db5f With this commit, I hereby pronounce gensetdefs past its use-by date.
Replace the a.out emulation of 'struct linker_set' with something
a little more flexible.  <sys/linker_set.h> now provides macros for
accessing elements and completely hides the implementation.

The linker_set.h macros have been on the back burner in various
forms since 1998 and has ideas and code from Mike Smith (SET_FOREACH()),
John Polstra (ELF clue) and myself (cleaned up API and the conversion
of the rest of the kernel to use it).

The macros declare a strongly typed set.  They return elements with the
type that you declare the set with, rather than a generic void *.

For ELF, we use the magic ld symbols (__start_<setname> and
__stop_<setname>).  Thanks to Richard Henderson <rth@redhat.com> for the
trick about how to force ld to provide them for kld's.

For a.out, we use the old linker_set struct.

NOTE: the item lists are no longer null terminated.  This is why
the code impact is high in certain areas.

The runtime linker has a new method to find the linker set
boundaries depending on which backend format is in use.

linker sets are still module/kld unfriendly and should never be used
for anything that may be modular one day.

Reviewed by:	eivind
2001-06-13 10:58:39 +00:00
Peter Wemm
c3aac50f28 $Id$ -> $FreeBSD$ 1999-08-28 01:08:13 +00:00
Poul-Henning Kamp
ce9edcf5b5 Merge the cons.c and cons.h to the best of my ability. alpha may or
may not compile, I can't test it.
1999-08-09 10:35:05 +00:00
Peter Wemm
1c6989fa7e Quiet warnings on Alpha. (db_expr_t is a long on alpha, int on x86) 1999-07-01 19:42:56 +00:00
Poul-Henning Kamp
3000820ae0 add some amount of sanity to the way the gdb stuff finds its device.
I'm not too happy about the result either, but at least it has less
chance of backfiring.

This particular feature could be called "a mess" without offending
anybody.
1999-05-09 10:51:13 +00:00
Kirk McKusick
5c92a5b353 Get rid of extern declarations on gdb stuff so systems compiled without
DDB will compile. Warn users that try to use GDB without specifying a GDB
port in their configuration file.
1999-05-07 23:08:23 +00:00
John Polstra
0ec81012da Replace includes of <sys/kernel.h> with includes of
<sys/linker_set.h> in those files that use only the linker set
definitions.
1999-01-14 06:22:10 +00:00
Bruce Evans
596dfc04ed Use not-so-new printf formats %r and/or %z instead of %n and/or %+x. 1998-07-08 10:53:58 +00:00
Poul-Henning Kamp
aec5a849f9 Redo the previous commit in a more Bruce-friendly fashion.
Urged by:	bde
1998-05-19 18:42:09 +00:00
Poul-Henning Kamp
7ee17eea02 Add "show msgbuf" command 1998-05-19 11:02:24 +00:00
Bruce Evans
b7aa38c1e3 Ensure that the linker sets for commands exist by putting a standard
command in each of them.  This removes the need for hard-to-configure
dummy instantiations of the sets.
1998-02-13 02:19:29 +00:00
Eivind Eklund
303b270b0a Staticize. 1998-02-09 06:11:36 +00:00
Peter Wemm
6875d25465 Back out part 1 of the MCFH that changed $Id$ to $FreeBSD$. We are not
ready for it yet.
1997-02-22 09:48:43 +00:00
Jordan K. Hubbard
1130b656e5 Make the long-awaited change from $Id$ to $FreeBSD$
This will make a number of things easier in the future, as well as (finally!)
avoiding the Id-smashing problem which has plagued developers for so long.

Boy, I'm glad we're not using sup anymore.  This update would have been
insane otherwise.
1997-01-14 07:20:47 +00:00
Bruce Evans
5778f6adb2 Fixed bogus linkage of one of the ddb linker sets. 1996-12-18 17:58:24 +00:00
Bruce Evans
6337f4efa8 Support statically attaching of ddb commands in non-ddb modules.
The details are hidden in the DB_COMMAND(cmd_name, func_name) and
DB_SHOW_COMMAND(cmd_name, func_name) macros.  DB_COMMAND() adds to
the top-level ddb command table and DB_SHOW_COMMAND adds to the
`show' subtable.  Most external commands will probably be `show'
commands with no side effects.  They should check their pointer
args more carefully than `show map' :-), or ddb should trap internal
faults better (like it does for memory accesses).

The vm ddb commands are temporarily unattached.

ddb.h:
Also declare `db_indent' and db_iprintf() which will replace vm's
`indent' and iprintf().
1996-09-14 09:13:15 +00:00
Paul Traina
ad146781b1 Allow the user to switch into gdb mode from ddb 1996-08-27 19:46:28 +00:00
Bruce Evans
5ccbc3cc5a Reduced and cleaned up #includes. 1995-12-10 19:08:32 +00:00
David Greenman
efeaf95a41 Untangled the vm.h include file spaghetti. 1995-12-07 12:48:31 +00:00
Poul-Henning Kamp
f73a856d23 Staticized and '#ifdef notused' stuff we don't use. 1995-11-29 10:25:50 +00:00
Bruce Evans
058284fceb Completed function declarations and/or added prototypes and/or #includes
to get the prototypes.

Changed some `int's to `boolean_t's.  boolean_t's are ints so they are
hard to distinguish from ints.

Converted function headers to old-style.  ddb is written in K&R1 C
except where we broke it.
1995-11-24 14:13:42 +00:00
Bruce Evans
976794d967 Change db_fncall() and db_panic() to have the correct number and type of
args for a ddb command.
1995-08-27 02:39:39 +00:00
Rodney W. Grimes
9b2e535452 Remove trailing whitespace. 1995-05-30 08:16:23 +00:00
David Greenman
edf8a81561 Removed redundant newlines that were in some panic strings. 1995-03-19 14:29:26 +00:00
Bruce Evans
b5e8ce9f12 Add and move declarations to fix all of the warnings from `gcc -Wimplicit'
(except in netccitt, netiso and netns) and most of the warnings from
`gcc -Wnested-externs'.  Fix all the bugs found.  There were no serious
ones.
1995-03-16 18:17:34 +00:00
Joerg Wunsch
2389804061 Make `p'' an explicit alias for `print'' instead of being an
implicit alias for ``panic'', since this seems to be more rational.
1995-03-05 22:56:21 +00:00
Poul-Henning Kamp
3eac488435 Added "panic" command to ddb, so we can do something sensible even if
we have no symbols.
1995-02-05 21:09:04 +00:00
David Greenman
8a129caed5 1) Changed ddb into a option rather than a pseudo-device (use options DDB
in your kernel config now).
2) Added ps ddb function from 1.1.5. Cleaned it up a bit and moved into its
   own file.
3) Added \r handing in db_printf.
4) Added missing memory usage stats to statclock().
5) Added dummy function to pseudo_set so it will be emitted if there
   are no other pseudo declarations.
1994-08-27 16:14:39 +00:00
Garrett Wollman
f23b4c91c4 Fix up some sloppy coding practices:
- Delete redundant declarations.
- Add -Wredundant-declarations to Makefile.i386 so they don't come back.
- Delete sloppy COMMON-style declarations of uninitialized data in
  header files.
- Add a few prototypes.
- Clean up warnings resulting from the above.

NB: ioconf.c will still generate a redundant-declaration warning, which
is unavoidable unless somebody volunteers to make `config' smarter.
1994-08-18 22:36:09 +00:00
Garrett Wollman
f540b1065a Change all #includes to follow the current Berkeley style. Some of these
``changes'' are actually not changes at all, but CVS sometimes has trouble
telling the difference.

This also includes support for second-directory compiles.  This is not
quite complete yet, as `config' doesn't yet do the right thing.  You can
still make it work trivially, however, by doing the following:

rm /sys/compile
mkdir /usr/obj/sys/compile
ln -s M-. /sys/compile
cd /sys/i386/conf
config MYKERNEL
cd ../../compile/MYKERNEL
ln -s /sys @
rm machine
ln -s @/i386/include machine
make depend
make
1994-08-13 03:50:34 +00:00
Rodney W. Grimes
26f9a76710 The big 4.4BSD Lite to FreeBSD 2.0.0 (Development) patch.
Reviewed by:	Rodney W. Grimes
Submitted by:	John Dyson and David Greenman
1994-05-25 09:21:21 +00:00
Guido van Rooij
51f4a07b5a ps works inside ddb now. 1994-02-11 21:14:52 +00:00
Garrett Wollman
381fe1aaf4 Make the LINT kernel compile with -W -Wreturn-type -Wcomment -Werror, and
add same (sans -Werror) to Makefile for future compilations.
1993-11-25 01:38:01 +00:00