general, when support was added to netstat for fetching data using sysctl,
no provision was left for fetching equivalent data from a core dump, and
in fact, netstat would _always_ fetch data from the live kernel using
sysctl even when -M was specified resulting in the user believing they
were getting data from coredumps when they actually weren't. Some specific
changes:
- Add a global 'live' variable that is true if netstat is running against
the live kernel and false if -M has been specified.
- Stop abusing the sysctl flag in the protocol tables to hold the protocol
number. Instead, the protocol is now its own field in the tables, and
it is passed as a separate parameter to the PCB and stat routines rather
than overloading the KVM offset parameter.
- Don't run PCB or stats functions who don't have a namelist offset if we
are being run against a crash dump (!live).
- For the inet and unix PCB routines, we generate the same buffer from KVM
that the sysctl usually generates complete with the header and trailer.
- Don't run bpf stats for !live (before it would just silently always run
live).
- kread() no longer trashes memory when opening the buffer if there is an
error on open and the passed in buffer is smaller than _POSIX2_LINE_MAX.
- The multicast routing code doesn't fallback to kvm on live kernels if
the sysctl fails. Keeping this made the code rather hairy, and netstat
is already tied to the kernel ABI anyway (even when using sysctl's since
things like xinpcb contain an inpcb) so any kernels this is run against
that have the multicast routing stuff should have the sysctls.
- Don't try to dig around in the kernel linker in the netgraph PCB routine
for core dumps.
Other notes:
- sctp's PCB routine only works on live kernels, it looked rather
complicated to generate all the same stuff via KVM. Someone can always
add it later if desired though.
- Fix the ipsec removal bug where N_xxx for IPSEC stats weren't renumbered.
- Use sysctlbyname() everywhere rather than hardcoded mib values.
MFC after: 1 week
Approved by: re (rwatson)
config info. from device.hints. Some machines have ipmi controllers
that do not have attachment info in either PCI, SMBIOS or ACPI.
This idea was hacked together by me and then done properly by
jhb.
Submitted by: jhb
Reviewed by: jhb (man page)
Approved by: re (Ken Smith)
MFC after: 1 week
The SDM states that writing to ar.bspstore invalidates the ar.rnat
register as a side-effect. This was interpreted as "bits in the
ar.rnat register that correspond to registers whose value is on
the stack are undefined'. Since we keep the kernel stack NaT-
aligned with the user stack (i.e. the lower 9 bits of the backing
store pointer remain unchanged when we switch to the kernel stack)
bits that need preserving would be preserved.
That interpretation is questionable. So, now, the interpretation
is more absolute: ar.rnat is undefined after writing to ar.bspstore.
As such, we write the saved value of ar.rnat back to ar.rnat after
writing to ar.bspstore.
Discussed with: christian.kandeler@hob.de
Approved by: re (kensmith)
itself. It needs mmap(2), which now needs getosreldate(3) and
which in turn uses a global variable to cache the result. This
cannot be done before linking is done.
See also: ../sparc64/reloc.c:1.15
Approved by: re (kensmith)
couldn't allocate more memory for a string. Change
this so it returns NULL in that case, and update
all of its callers to handle the error. Some of
those callers can now return errors back to the
client instead of calling exit(3).
Approved by: re (bmah)
- Keep last transaction label for each destination.
- If the next label is not free, just give up.
- This should reduce CPU load for TX on if_fwip under heavy load.
Approved by: re (hrs)
NET_NEEDS_GIANT, which will shortly be removed. This is done in a
away that it may be easily reattached to the build before 7.1 if
appropriate locking is added. Specifics:
- Don't install netatm include files
- Disconnect netatm command line management tools
- Don't build libatm
- Don't include ATM parts in rescue or sysinstall
- Don't install sample configuration files and documents
- Don't build kernel support as a module or in NOTES
- Don't build netgraph wrapper nodes for netatm
This removes the last remaining consumer of NET_NEEDS_GIANT.
Reviewed by: harti
Discussed with: bz, bms
Approved by: re (kensmith)
vm_phys_free_pages(). Rename vm_phys_alloc_pages_locked() to
vm_phys_alloc_pages() and vm_phys_free_pages_locked() to
vm_phys_free_pages(). Add comments regarding the need for the free page
queues lock to be held by callers to these functions. No functional
changes.
Approved by: re (hrs)
if there was more than one. In particular, this simplifies
test_tar_filenames.c, which has a tendency to be very noisy otherwise.
Approved by: re (blanket, libarchive testing)
- CMT_PF states added (w/sysctl to turn the PF version on)
- sctp_input.c had a missing incr of cookie case when the
auth was bad. This meant a free was called without an
increment to refcnt, added increment like rest of code.
- There was a case, unlikely, when the scope of the destination
changed (this is a TSNH case). In that case, it would not free
the alloc'ed asoc (in sctp_input.c).
- When listed addresses found a colliding cookie/Init, then
the collided upon tcb was not unlocked in sctp_pcb.c
- Add error checking on arguments of sctp_sendx(3) to prevent it from
referencing a NULL pointer.
- Fix an error return of sctp_sendx(3), it was returing
ENOMEM not -1.
- Get assoc id was changed to use the sanctified socket api
method for getting a assoc id (PEER_ADDR_INFO instead of
PEER_ADDR_PARAMS).
- Fix it so a peeled off socket will get a proper error return
if it trys to send to a different address then it is connected to.
- Fix so that select_a_stream can avoid an endless loop that
could hang a caller.
- time_entered (state set time) was not being set in all cases
to the time we went established.
Approved by: re(ken smith)
This adds a function to agp.c to set the aperture resource ID if it's
not the usual AGP_APBASE. Previously, agp.c had been assuming
AGP_APBASE, which resulted in incorrect agp_info, and contortions by
agp_i810.c to work around it.
This also adds functions to agp.c for default AGP_GET_APERTURE() and
AGP_SET_APERTURE(), which return the aperture resource size and disallow
aperture size changes. Moving to these for our AGP drivers will likely
result in stability improvements. This should fix 855-class aperture
size detection.
Additionally, refuse to attach agp_i810 when some RAM is above 4GB and
the GART can't reference memory that high. This should be very rare.
The correct solution would be bus_dma conversion for agp, which is
beyond the scope of this change. Other AGP drivers could likely use
this change as well.
G33/Q35/Q33 AGP support is also included, but disconnected by default
due to lack of testing.
PR: kern/109724 (855 aperture issue)
Submitted by: FUJIMOTO Kou<fujimoto@j.dendai.ac.jp>
Approved by: re (hrs)
it now verifies that the returned blocks have the correct data
at the correct file offsets, ignoring any null padding that
may exist.
Approved by: re (blanket, libarchive test suite)
behavior with truncated or damaged pax archives. This
tests most of the cases covered by the recent security advisory.
Approved by: re (blanket, libarchive test suite)
archive_read_open_memory.c that tries to test border
cases. In particular, it copies over each returned block
so that formats or decompressors that read past the end
of a returned block will break.
Approved by: re (blanket, libarchive test suite)
Add support for the CENTIPAD board (http://www.harerod.de/centipad/index.html)
(which is a very cool, very small ARM board)
Add support for KB9202B (it has different memory)
Make BOOT_FLAVOR settable
Minor cleanup nits
Approved by: re@
It is a latin9/ISO_8859-15 and features dead keys for ^/uml/`, Euro, oe/OE
support and a few additional characters like copyright/trademark.
It is probably Powerbook/iBook compatible but I don't have a machine to test
it with and the primary objective was to have a correct keyboard for within
Parallels (for IntelMacs).
Approved by: re (hrs)
by removing files from src/sys/coda, and updating include paths in the
new location, kernel configuration, and Makefiles. In one case add
$FreeBSD$.
Discussed with: anderson, Jan Harkes <jaharkes@cs.cmu.edu>
Approved by: re (kensmith)
Repo-copy madness: simon
- change include style so build in kernel try OR standalone work.
- Limit HWCSUM - I was led to believe that it would work with RSS,
but our testing had odd issues which suggests this is false.
- A fatfinger error in the ioctl code made ifconfig up not work.
Approved by: re
- ixgbe.c, ixgbe.h, and ixgbe_osdep.h make the core OS driver.
- Others are OS independent shared code.
- This is still a Beta driver, the Intel ship is a month or so off,
so I welcome any feedback from early users.
Approved by: re
kernels exposed by the recent fixes to resource limits for 32-bit processes
on 64-bit kernels:
- Let ABIs expose their maximum stack size via a new pointer in sysentvec
and use that in preference to maxssiz during exec() rather than always
using maxssiz for all processses.
- Apply the ABI's limit fixup to the previous stack size when adjusting
RLIMIT_STACK to determine if the existing mapping for the stack needs to
be grown or shrunk (as well as how much it should be grown or shrunk).
Approved by: re (kensmith)
to the FAT is possible.
Make the FAT block size less arbitrary before it is rounded up:
- for FAT12, default to 3*512 instead of to 3 sectors. The magic 3 is
the default number of 512-byte FAT sectors on a floppy drive. That
many sectors is too many if the sector size is larger.
- for !FAT12, default to PAGE_SIZE instead of to 4096. Remove
MSDOSFS_DFLTBSIZE since it only obfuscated this 4096.
For reading the BPB, use a block size of 8192 instead of 2048 so that
sector sizes up to 8192 can work. We should try several sizes, or just
try the maximum supported size (MAXBSIZE = 64K). I use 8192 because
that is enough for DVD-RW's (even 2048 is enough) and 8192 has been
tested a lot in use by ffs.
This completes fixing msdosfs for some large sector sizes (up to 8K
for read and 64K for write). Microsoft documents support for sector
sizes up to 4K in mdosfs. ffs is currently limited to 8K for both
read and write.
Approved by: re (kensmith)
Approved by: nyan (several years ago)
Rev 1.9 introduced another path where machclk_freq would be initialized
before the rest of setup was done (i.e. initializing the callout). Make
the one-time initialization a separate function and make init_machclk()
able to be called multiple times, any time. We depend on tsc_freq first
being updated from the highest priority eventhandler, thus we run last
and call init_machclk() to set machclk_freq. Also, don't initialize
static variables to 0.
Tested by: Eygene Ryabinkin
Approved by: re
