socket-buffer implementations, introduce a return value for MCLGET()
(and m_cljget() that underlies it) to allow the caller to avoid testing
M_EXT itself. Update all callers to use the return value.
With this change, very few network device drivers remain aware of
M_EXT; the primary exceptions lie in mbuf-chain pretty printers for
debugging, and in a few cases, custom mbuf and cluster allocation
implementations.
NB: This is a difficult-to-test change as it touches many drivers for
which I don't have physical devices. Instead we've gone for intensive
review, but further post-commit review would definitely be appreciated
to spot errors where changes could not easily be made mechanically,
but were largely mechanical in nature.
Differential Revision: https://reviews.freebsd.org/D1440
Reviewed by: adrian, bz, gnn
Sponsored by: EMC / Isilon Storage Division
- Remove unsupported "bus" field from "struct pci_dev".
- Fix logic inside "pci_enable_msix()" when the number of allocated
interrupts are less than the number of available interrupts.
- Update header files included from "list.h".
- Ensure that "idr_destroy()" removes all entries before destroying
the IDR root node(s).
- Set the "device->release" function so that we don't leak memory at
device destruction.
- Use FreeBSD's "log()" function for certain debug printouts.
- Put parenthesis around arguments inside the min, max, min_t and max_t macros.
- Make sure we don't leak file descriptors by dropping the extra file
reference counts done by the FreeBSD kernel when calling falloc()
and fget_unlocked().
MFC after: 1 week
Sponsored by: Mellanox Technologies
Split functions that initialize various pf parts into their
vimage parts and global parts.
Since global parts appeared to be only mutex initializations, just
abandon them and use MTX_SYSINIT() instead.
Kill my incorrect VNET_FOREACH() iterator and instead use correct
approach with VNET_SYSINIT().
PR: 194515
Differential Revision: D1309
Submitted by: glebius, Nikos Vassiliadis <nvass@gmx.com>
Reviewed by: trociny, zec, gnn
The QCA955x has more mux interrupts going on - and the AR934x actually does,
but I cheated and assigned wlan and pcie to the same interrupt line.
They are, there's just a status register mux that I should've been using.
Luckily this isn't too bad a change in itself - almost all of the
Atheros MIPS configurations use a _BASE file to inherit from.
Except PB92, which I should really fix up at some point.
The AR934x will use the legacy apb for now until I write its replacement.
The QCA955x SoC I'm doing bring-up on will have a separate qca955x_apb.c
implementation that includes hooking into IP2/IP3 and doing further
interrupt demuxing as appropriate.
APB mux.
It's larger than the AR71xx because it needs to replace the nexus
for some devices (notably wifi) and the wifi driver (if_ath_ahb.c)
reads the SPI data directly at early boot whilst it's memory mapped
in.
I'm eventually going to rip it out and replace it with a firmware
interface similar to what exists for the if_ath_pci.c path -
something early on (likely something new that I'll write) will
suck in the calibration data into a firmware API blob and that'll
be accessed from if_ath_ahb.c.
But, one thing at a time.
Tested:
* QCA955x SoC, AP135 development board
of the scan API.
The eventual aim is to have 'ieee80211_scan.c' have the net80211 and
driver facing scan API to start, finish and continue doing scanning
while 'ieee80211_swscan.c' implements the software scanner that
runs the scan task, handles probe request/reply bits, configures
the VAP off-channel, changes channel and does the scanning bits.
For NICs that do no scanning at all, the existing code is needed.
ath(4) and most of the other NICs (dumb USB ones in particular)
do little to no scan offload - it's all done in software.
Some NICs may do single channel at a time scanning; I haven't really
checked them out in detail.
iwn(4), the upcoming 7260 driver stuff, the new Qualcomm Atheros
11ac chipsets and the Atheros mobile/USB full-offload chips all
have complete scan engines in firmware. We don't have to drive
any of it at all - the firmware just needs to be told what to scan,
when to scan, how long to scan. It'll take care of going off
channel, pausing TX/RX appropriately, sending sleep notification
to the AP, sending probe requests and handling probe responses.
It'll do passive/active scan itself. It's almost completely
transparent to the network stack - all we see are scan notifications
when it finishes scanning each channel and beacons/probe responses
when it does its thing. Once it's done we get a final notification
that the scan is complete, with some scan results in the message.
The iwn(4) NICs handle doing active scanning too as an option
and will handle waiting appropriately on 5GHz passive channels
before active scanning.
There's some more refactoring, tidying up and lock assertions to
sprinkle around to tidy this whole thing up before I turn swscan.c
into another set of ic methods to override by the driver or
alternate scan module. So in theory this is all one big no-op
commit. In theory.
Tested:
* iwn(4) 5200, STA mode
* ath(4) 6205, STA mode
* ath(4) - various NICs, AP mode
may perform a blocking memory allocation, which is unsafe when holding a
mutex.
Differential Revision: https://reviews.freebsd.org/D1443
Reviewed by: rwatson
MFC after: 1 week
Sponsored by: EMC / Isilon Storage Division
may also halt in C2 and not just C3 (it seems that in some cases the BIOS
advertises its C3 state as a C2 state in _CST). Just play it safe and
disable both C2 and C3 states if a user forces the use of the TSC as the
timecounter on such CPUs.
PR: 192316
Differential Revision: https://reviews.freebsd.org/D1441
No objection from: jkim
MFC after: 1 week
has support for the .codeXX directives). However, it is desirable, for
a time, to allow kernels to be built with clang 3.4. Historically, it
has been advantageous to allow stable X-1 to build kernels the old
way (so long as the impact of doing so is small), and this restores
that ability.
Also, centralize the addition of ${ASM_CFLAGS.${.IMPSRC}}, place it in
kern.mk rather than kern.pre.mk so that all modules can benefit, and
give the same treatment to CFLAGS in kern.mk as well.
the knowledge of mbuf layout, and in particular constants such as M_EXT,
MLEN, MHLEN, and so on, in mbuf consumers by unifying various alignment
utility functions (M_ALIGN(), MH_ALIGN(), MEXT_ALIGN() in a single
M_ALIGN() macro, implemented by a now-inlined m_align() function:
- Move m_align() from uipc_mbuf.c to mbuf.h; mark as __inline.
- Reimplement M_ALIGN(), MH_ALIGN(), and MEXT_ALIGN() using m_align().
- Update consumers around the tree to simply use M_ALIGN().
This change eliminates a number of cases where mbuf consumers must be aware
of whether or not mbufs returned by the allocator use external storage, but
also assumptions about the size of the returned mbuf. This will make it
easier to introduce changes in how we use external storage, as well as
features such as variable-size mbufs.
Differential Revision: https://reviews.freebsd.org/D1436
Reviewed by: glebius, trasz, gnn, bz
Sponsored by: EMC / Isilon Storage Division
loader on PS3 and POWER8 systems. This is reasonably portable to other
architectures, especially FDT-based ones, if similar features are useful
elsewhere.
Netboot support is missing for now and will be added in a future commit,
at which time loader.ps3 will be garbage collected.
Done at: Hackathon
This adds the initial frequency poking and configures up enough
for it to boot and spit out data over the console.
There's still a whole bunch of work to do in the reset path
and devices to support this thing, but hey, it's alive!
ath> go 0x80050100
## Starting application at 0x80050100 ...
CPU platform: Atheros AR9558 rev 0
CPU Frequency=720 MHz
CPU DDR Frequency=600 MHz
CPU AHB Frequency=200 MHz
platform frequency: 720 MHz
CPU reference clock: 0 MHz
CPU MDIO clock: 40 MHz
Done at: hackathon
Obtained from: Linux OpenWRT, Qualcomm Atheros
There's likely a bunch of register offsets that I have to add the
register window base to before I use them.
Done at: Hackathon
Obtained from: Linux OpenWRT
building with gcc 4.2
This has been requested several times over the past few months by several
people (including me), because gcc 4.2 just gets it wrong too often. It's
causing us to litter the code with lots of bogus initializers just to
squelch the warnings. We still have clang and coverity telling us about
uninitialized variables, and they do so more accurately.
Phabric: https://reviews.freebsd.org/D1247
Reviewed by: jhb, avg
Sponsored by: Spectra Logic Corporation
sys/kern_subr_taskqueue.c:
Modify taskqueue_drain_all() processing to use a temporary
"barrier task", rather than rely on a user task that may
be destroyed during taskqueue_drain_all()'s execution. The
barrier task is queued behind all previously queued tasks
and then has its priority elevated so that future tasks
cannot pass it in the queue.
Use a similar barrier scheme to drain threads processing
current tasks. This requires taskqueue_run_locked() to
insert and remove the taskqueue_busy object for the running
thread for every task processed.
share/man/man9/taskqueue.9:
Remove warning about live-lock issues with taskqueue_drain_all()
and indicate that it does not wait for tasks queued after
it begins processing.
in r276564, change path type to char * (pathnames are always char *).
And remove bogus casts of malloc().
kern___getcwd() internally doesn't actually use or support u_char *
paths, except to copy them to a normal char * path.
These changes are not visible to libc as libc/gen/getcwd.c misdeclares
__getcwd() as taking a plain char * path.
While here remove _SYS_SYSPROTO_H_ for __getcwd() syscall as
we always have sysproto.h.
Pointed out by: bde
MFC after: 1 week
