Currently we have tables identified by their names in userland
with internal kernel-assigned indices. This works the following way:
When userland wishes to communicate with kernel to add or change rule(s),
it makes indexed sorted array of table names
(internally ipfw_obj_ntlv entries), and refer to indices in that
array in rule manipulation.
Prior to committing new rule to the ruleset kernel
a) finds all referenced tables, bump their refcounts and change
values inside the opcodes to be real kernel indices
b) auto-creates all referenced but not existing tables and then
do a) for them.
Kernel does almost the same when exporting rules to userland:
prepares array of used tables in all rules in range, and
prepends it before the actual ruleset retaining actual in-kernel
indexes for that.
There is also special translation layer for legacy clients which is
able to provide 'real' indices for table names (basically doing atoi()).
While it is arguable that every subsystem really needs names instead of
numbers, there are several things that should be noted:
1) every non-singleton subsystem needs to store its runtime state
somewhere inside ipfw chain (and be able to get it fast)
2) we can't assume object numbers provided by humans will be dense.
Existing nat implementation (O(n) access and LIST inside chain) is a
good example.
Hence the following:
* Convert table-centric rewrite code to be more generic, callback-based
* Move most of the code from ip_fw_table.c to ip_fw_sockopt.c
* Provide abstract API to permit subsystems convert their objects
between userland string identifier and in-kernel index.
(See struct opcode_obj_rewrite) for more details
* Create another per-chain index (in next commit) shared among all subsystems
* Convert current NAT44 implementation to use new API, O(1) lookups,
shared index and names instead of numbers (in next commit).
Sponsored by: Yandex LLC
to obtain IPv4 next hop address in tablearg case.
Add `fwd tablearg' support for IPv6. ipfw(8) uses INADDR_ANY as next hop
address in O_FORWARD_IP opcode for specifying tablearg case. For IPv6 we
still use this opcode, but when packet identified as IPv6 packet, we
obtain next hop address from dedicated field nh6 in struct table_value.
Replace hopstore field in struct ip_fw_args with anonymous union and add
hopstore6 field. Use this field to copy tablearg value for IPv6.
Replace spare1 field in struct table_value with zoneid. Use it to keep
scope zone id for link-local IPv6 addresses. Since spare1 was used
internally, replace spare0 array with two variables spare0 and spare1.
Use getaddrinfo(3)/getnameinfo(3) functions for parsing and formatting
IPv6 addresses in table_value. Use zoneid field in struct table_value
to store sin6_scope_id value.
Since the kernel still uses embedded scope zone id to represent
link-local addresses, convert next_hop6 address into this form before
return from pfil processing. This also fixes in6_localip() check
for link-local addresses.
Differential Revision: https://reviews.freebsd.org/D2015
Obtained from: Yandex LLC
Sponsored by: Yandex LLC
Kernel changes:
* Split kernel/userland nat structures eliminating IPFW_INTERNAL hack.
* Add IP_FW_NAT44_* codes resemblin old ones.
* Assume that instances can be named (no kernel support currently).
* Use both UH+WLOCK locks for all configuration changes.
* Provide full ABI support for old sockopts.
Userland changes:
* Use IP_FW_NAT44_* codes for nat operations.
* Remove undocumented ability to show ranges of nat "log" entries.
This is the last major change in given branch.
Kernel changes:
* Use 64-bytes structures to hold multi-value variables.
* Use shared array to hold values from all tables (assume
each table algo is capable of holding 32-byte variables).
* Add some placeholders to support per-table value arrays in future.
* Use simple eventhandler-style API to ease the process of adding new
table items. Currently table addition may required multiple UH drops/
acquires which is quite tricky due to atomic table modificatio/swap
support, shared array resize, etc. Deal with it by calling special
notifier capable of rolling back state before actually performing
swap/resize operations. Original operation then restarts itself after
acquiring UH lock.
* Bump all objhash users default values to at least 64
* Fix custom hashing inside objhash.
Userland changes:
* Add support for dumping shared value array via "vlist" internal cmd.
* Some small print/fill_flags dixes to support u32 values.
* valtype is now bitmask of
<skipto|pipe|fib|nat|dscp|tag|divert|netgraph|limit|ipv4|ipv6>.
New values can hold distinct values for each of this types.
* Provide special "legacy" type which assumes all values are the same.
* More helpers/docs following..
Some examples:
3:41 [1] zfscurr0# ipfw table mimimi create valtype skipto,limit,ipv4,ipv6
3:41 [1] zfscurr0# ipfw table mimimi info
+++ table(mimimi), set(0) +++
kindex: 2, type: addr
references: 0, valtype: skipto,limit,ipv4,ipv6
algorithm: addr:radix
items: 0, size: 296
3:42 [1] zfscurr0# ipfw table mimimi add 10.0.0.5 3000,10,10.0.0.1,2a02:978:2::1
added: 10.0.0.5/32 3000,10,10.0.0.1,2a02:978:2::1
3:42 [1] zfscurr0# ipfw table mimimi list
+++ table(mimimi), set(0) +++
10.0.0.5/32 3000,0,10.0.0.1,2a02:978:2::1
Most of the tablearg-supported opcodes does not accept 0 as valid value:
O_TAG, O_TAGGED, O_PIPE, O_QUEUE, O_DIVERT, O_TEE, O_SKIPTO, O_CALLRET,
O_NETGRAPH, O_NGTEE, O_NAT treats 0 as invalid input.
The rest are O_SETDSCP and O_SETFIB.
'Fix' them by adding high-order bit (0x8000) set for non-tablearg values.
Do translation in kernel for old clients (import_rule0 / export_rule0),
teach current ipfw(8) binary to add/remove given bit.
This change does not affect handling SETDSCP values, but limit
O_SETFIB values to 32767 instead of 65k. Since currently we have either
old (16) or new (2^32) max fibs, this should not be a big deal:
we're definitely OK for former and have to add another opcode to deal
with latter, regardless of tablearg value.
* Since there seems to be lack of consensus on strict value typing,
remove non-default value types. Use userland-only "value format type"
to print values.
Kernel changes:
* Add IP_FW_XMODIFY to permit table run-time modifications.
Currently we support changing limit and value format type.
Userland changes:
* Support IP_FW_XMODIFY opcode.
* Support specifying value format type (ftype) in tablble create/modify req
* Fine-print value type/value format type.
* Implement proper checks for switching between global and set-aware tables
* Split IP_FW_DEL mess into the following opcodes:
* IP_FW_XDEL (del rules matching pattern)
* IP_FW_XMOVE (move rules matching pattern to another set)
* IP_FW_SET_SWAP (swap between 2 sets)
* IP_FW_SET_MOVE (move one set to another one)
* IP_FW_SET_ENABLE (enable/disable sets)
* Add IP_FW_XZERO / IP_FW_XRESETLOG to finish IP_FW3 migration.
* Use unified ipfw_range_tlv as range description for all of the above.
* Check dynamic states IFF there was non-zero number of deleted dyn rules,
* Del relevant dynamic states with singe traversal instead of per-rule one.
Userland changes:
* Switch ipfw(8) to use new opcodes.
Kernel changes:
* Add opcode IP_FW_TABLE_XSWAP
* Add support for swapping 2 tables with the same type/ftype/vtype.
* Make skipto cache init after ipfw locks init.
Userland changes:
* Add "table X swap Y" command.
Kernel changes:
* Add TEI_FLAGS_DONTADD entry flag to indicate that insert is not possible
* Support given flag in all algorithms
* Add "limit" field to ipfw_xtable_info
* Add actual limiting code into add_table_entry()
Userland changes:
* Add "limit" option as "create" table sub-option. Limit modification
is currently impossible.
* Print human-readable errors in table enry addition/deletion code.
* Add "flow:hash" algorithm
Kernel changes:
* Add O_IP_FLOW_LOOKUP opcode to support "flow" lookups
* Add IPFW_TABLE_FLOW table type
* Add "struct tflow_entry" as strage for 6-tuple flows
* Add "flow:hash" algorithm. Basically it is auto-growing chained hash table.
Additionally, we store mask of fields we need to compare in each instance/
* Increase ipfw_obj_tentry size by adding struct tflow_entry
* Add per-algorithm stat (ifpw_ta_tinfo) to ipfw_xtable_info
* Increase algoname length: 32 -> 64 (algo options passed there as string)
* Assume every table type can be customized by flags, use u8 to store "tflags" field.
* Simplify ipfw_find_table_entry() by providing @tentry directly to algo callback.
* Fix bug in cidr:chash resize procedure.
Userland changes:
* add "flow table(NAME)" syntax to support n-tuple checking tables.
* make fill_flags() separate function to ease working with _s_x arrays
* change "table info" output to reflect longer "type" fields
Syntax:
ipfw table fl2 create type flow:[src-ip][,proto][,src-port][,dst-ip][dst-port] [algo flow:hash]
Examples:
0:02 [2] zfscurr0# ipfw table fl2 create type flow:src-ip,proto,dst-port algo flow:hash
0:02 [2] zfscurr0# ipfw table fl2 info
+++ table(fl2), set(0) +++
kindex: 0, type: flow:src-ip,proto,dst-port
valtype: number, references: 0
algorithm: flow:hash
items: 0, size: 280
0:02 [2] zfscurr0# ipfw table fl2 add 2a02:6b8::333,tcp,443 45000
0:02 [2] zfscurr0# ipfw table fl2 add 10.0.0.92,tcp,80 22000
0:02 [2] zfscurr0# ipfw table fl2 list
+++ table(fl2), set(0) +++
2a02:6b8::333,6,443 45000
10.0.0.92,6,80 22000
0:02 [2] zfscurr0# ipfw add 200 count tcp from me to 78.46.89.105 80 flow 'table(fl2)'
00200 count tcp from me to 78.46.89.105 dst-port 80 flow table(fl2)
0:03 [2] zfscurr0# ipfw show
00200 0 0 count tcp from me to 78.46.89.105 dst-port 80 flow table(fl2)
65535 617 59416 allow ip from any to any
0:03 [2] zfscurr0# telnet -s 10.0.0.92 78.46.89.105 80
Trying 78.46.89.105...
..
0:04 [2] zfscurr0# ipfw show
00200 5 272 count tcp from me to 78.46.89.105 dst-port 80 flow table(fl2)
65535 682 66733 allow ip from any to any
Kernel changes:
* s/IPFW_TABLE_U32/IPFW_TABLE_NUMBER/
* Force "lookup <port|uid|gid|jid>" to be IPFW_TABLE_NUMBER
* Support "lookup" method for number tables
* Add number:array algorihm (i32 as key, auto-growing).
Userland changes:
* Support named tables in "lookup <tag> Table"
* Fix handling of "table(NAME,val)" case
* Support printing "number" table data.
* Rewrite interface tables to use interface indexes
Kernel changes:
* Add generic interface tracking API:
- ipfw_iface_ref (must call unlocked, performs lazy init if needed, allocates
state & bumps ref)
- ipfw_iface_add_ntfy(UH_WLOCK+WLOCK, links comsumer & runs its callback to
update ifindex)
- ipfw_iface_del_ntfy(UH_WLOCK+WLOCK, unlinks consumer)
- ipfw_iface_unref(unlocked, drops reference)
Additionally, consumer callbacks are called in interface withdrawal/departure.
* Rewrite interface tables to use iface tracking API. Currently tables are
implemented the following way:
runtime data is stored as sorted array of {ifidx, val} for existing interfaces
full data is stored inside namedobj instance (chained hashed table).
* Add IP_FW_XIFLIST opcode to dump status of tracked interfaces
* Pass @chain ptr to most non-locked algorithm callbacks:
(prepare_add, prepare_del, flush_entry ..). This may be needed for better
interaction of given algorithm an other ipfw subsystems
* Add optional "change_ti" algorithm handler to permit updating of
cached table_info pointer (happens in case of table_max resize)
* Fix small bug in ipfw_list_tables()
* Add badd (insert into sorted array) and bdel (remove from sorted array) funcs
Userland changes:
* Add "iflist" cmd to print status of currently tracked interface
* Add stringnum_cmp for better interface/table names sorting
* Switch kernel to use per-cpu counters for rules.
* Keep ABI/API.
Kernel changes:
* Each rules is now exported as TLV with optional extenable
counter block (ip_fW_bcounter for base one) and
ip_fw_rule for rule&cmd data.
* Counters needs to be explicitly requested by IPFW_CFG_GET_COUNTERS flag.
* Separate counters from rules in kernel and clean up ip_fw a bit.
* Pack each rule in IPFW_TLV_RULE_ENT tlv to ease parsing.
* Introduce versioning in container TLV (may be needed in future).
* Fix ipfw_cfg_lheader broken u64 alignment.
Userland changes:
* Use set_mask from cfg header when requesting config
* Fix incorrect read accouting in ipfw_show_config()
* Use IPFW_RULE_NOOPT flag instead of playing with _pad
* Fix "ipfw -d list": do not print counters for dynamic states
* Some small fixes
Kernel changes:
* Change dump format for dynamic states:
each state is now stored inside ipfw_obj_dyntlv
last dynamic state is indicated by IPFW_DF_LAST flag
* Do not perform sooptcopyout() for !SOPT_GET requests.
Userland changes:
* Introduce foreach_state() function handler to ease work
with different states passed by ipfw_dump_config().
* Bump table dump format preserving old ABI.
Kernel size:
* Add IP_FW_TABLE_XFIND to handle "lookup" request from userland.
* Add ta_find_tentry() algorithm callbacks/handlers to support lookups.
* Fully switch to ipfw_obj_tentry for various table dumps:
algorithms are now required to support the latest (ipfw_obj_tentry) entry
dump format, the rest is handled by generic dump code.
IP_FW_TABLE_XLIST opcode version bumped (0 -> 1).
* Eliminate legacy ta_dump_entry algo handler:
dump_table_entry() converts data from current to legacy format.
Userland side:
* Add "lookup" table parameter.
* Change the way table type is guessed: call table_get_info() first,
and check value for IPv4/IPv6 type IFF table does not exist.
* Fix table_get_list(): do more tries if supplied buffer is not enough.
* Sparate table_show_entry() from table_show_list().
Kernel changes:
* Introduce ipfw_obj_tentry table entry structure to force u64 alignment.
* Support "update-on-existing-key" "add" bahavior (TEI_FLAGS_UPDATED).
* Use "subtype" field to distingush between IPv4 and IPv6 table records
instead of previous hack.
* Add value type (vtype) field for kernel tables. Current types are
number,ip and dscp
* Fix sets mask retrieval for old binaries
* Fix crash while using interface tables
Userland changes:
* Switch ipfw_table_handler() to use named-only tables.
* Add "table NAME create [type {cidr|iface|u32} [valtype {number|ip|dscp}] ..."
* Switch ipfw_table_handler to match_token()-based parser.
* Switch ipfw_sets_handler to use new ipfw_get_config() for mask retrieval.
* Allow ipfw set X table ... syntax to permit using per-set table namespaces.
Kernel changes:
* change base TLV header to be u64 (so size can be u32).
* Introduce ipfw_obj_ctlv generc container TLV.
* Add IP_FW_XGET opcode which is now used for atomic configuration
retrieval. One can specify needed configuration pieces to retrieve
via flags field. Currently supported are
IPFW_CFG_GET_STATIC (static rules) and
IPFW_CFG_GET_STATES (dynamic states).
Other configuration pieces (tables, pipes, etc..) support is planned.
Userland changes:
* Switch ipfw(8) to use new IP_FW_XGET for rule listing.
* Split rule listing code get and show pieces.
* Make several steps forward towards libipfw:
permit printing states and rules(paritally) to supplied buffer.
do not die on malloc/kernel failure inside given printing functions.
stop assuming cmdline_opts is global symbol.
* Add 'algoname' string to ipfw_xtable_info permitting to specify lookup
algoritm with parameters.
* Rework part of ipfw_rewrite_table_uidx()
Sponsored by: Yandex LLC
* Use one u16 from op3 header to implement opcode versioning.
* IP_FW_TABLE_XLIST has now 2 handlers, for ver.0 (old) and ver.1 (current).
* Every getsockopt request is now handled in ip_fw_table.c
* Rename new opcodes:
IP_FW_OBJ_DEL -> IP_FW_TABLE_XDESTROY
IP_FW_OBJ_LISTSIZE -> IP_FW_TABLES_XGETSIZE
IP_FW_OBJ_LIST -> IP_FW_TABLES_XLIST
IP_FW_OBJ_INFO -> IP_FW_TABLE_XINFO
IP_FW_OBJ_INFO -> IP_FW_TABLE_XFLUSH
* Add some docs about using given opcodes.
* Group some legacy opcode/handlers.
Kernel changes:
* Add IP_FW_OBJ_FLUSH opcode (flush table based on its name/set)
* Add IP_FW_OBJ_DUMP opcode (dumps table data based on its names/set)
* Add IP_FW_OBJ_LISTSIZE / IP_FW_OBJ_LIST opcodes (get list of kernel tables)
Userland changes:
* move tables code to separate tables.c file
* get rid of tables_max
* switch "all"/list handling to new opcodes
Kernel-side changelog:
* Split general tables code and algorithm-specific table data.
Current algorithms (IPv4/IPv6 radix and interface tables radix) moved to
new ip_fw_table_algo.c file.
Tables code now supports any algorithm implementing the following callbacks:
+struct table_algo {
+ char name[64];
+ int idx;
+ ta_init *init;
+ ta_destroy *destroy;
+ table_lookup_t *lookup;
+ ta_prepare_add *prepare_add;
+ ta_prepare_del *prepare_del;
+ ta_add *add;
+ ta_del *del;
+ ta_flush_entry *flush_entry;
+ ta_foreach *foreach;
+ ta_dump_entry *dump_entry;
+ ta_dump_xentry *dump_xentry;
+};
* Change ->state, ->xstate, ->tabletype fields of ip_fw_chain to
->tablestate pointer (array of 32 bytes structures necessary for
runtime lookups (can be probably shrinked to 16 bytes later):
+struct table_info {
+ table_lookup_t *lookup; /* Lookup function */
+ void *state; /* Lookup radix/other structure */
+ void *xstate; /* eXtended state */
+ u_long data; /* Hints for given func */
+};
* Add count method for namedobj instance to ease size calculations
* Bump ip_fw3 buffer in ipfw_clt 128->256 bytes.
* Improve bitmask resizing on tables_max change.
* Remove table numbers checking from most places.
* Fix wrong nesting in ipfw_rewrite_table_uidx().
* Add IP_FW_OBJ_LIST opcode (list all objects of given type, currently
implemented for IPFW_OBJTYPE_TABLE).
* Add IP_FW_OBJ_LISTSIZE (get buffer size to hold IP_FW_OBJ_LIST data,
currenly implemented for IPFW_OBJTYPE_TABLE).
* Add IP_FW_OBJ_INFO (requests info for one object of given type).
Some name changes:
s/ipfw_xtable_tlv/ipfw_obj_tlv/ (no table specifics)
s/ipfw_xtable_ntlv/ipfw_obj_ntlv/ (no table specifics)
Userland changes:
* Add do_set3() cmd to ipfw2 to ease dealing with op3-embeded opcodes.
* Add/improve support for destroy/info cmds.
* Add namedobject set-aware api capable of searching/allocation objects by their name/idx.
* Switch tables code to use string ids for configuration tasks.
* Change locking model: most configuration changes are protected with UH lock, runtime-visible are protected with both locks.
* Reduce number of arguments passed to ipfw_table_add/del by using separate structure.
* Add internal V_fw_tables_sets tunable (set to 0) to prepare for set-aware tables (requires opcodes/client support)
* Implement typed table referencing (and tables are implicitly allocated with all state like radix ptrs on reference)
* Add "destroy" ipfw(8) using new IP_FW_DELOBJ opcode
Namedobj more detailed:
* Blackbox api providing methods to add/del/search/enumerate objects
* Statically-sized hashes for names/indexes
* Per-set bitmask to indicate free indexes
* Separate methods for index alloc/delete/resize
Basically, there should not be any user-visible changes except the following:
* reducing table_max is not supported
* flush & add change table type won't work if table is referenced
Sponsored by: Yandex LLC
Add `flags` u16 field to the hole in ipfw_table_xentry structure.
Kernel has been guessing address family for supplied record based
on xent length size.
Userland, however, has been getting fixed-size ipfw_table_xentry structures
guessing address family by checking address by IN6_IS_ADDR_V4COMPAT().
Fix this behavior by providing specific IPFW_TCF_INET flag for IPv4 records.
PR: bin/189471
Submitted by: Dennis Yusupoff <dyr@smartspb.net>
MFC after: 2 weeks
Setting DSCP support is done via O_SETDSCP which works for both
IPv4 and IPv6 packets. Fast checksum recalculation (RFC 1624) is done for IPv4.
Dscp can be specified by name (AFXY, CSX, BE, EF), by value
(0..63) or via tablearg.
Matching DSCP is done via another opcode (O_DSCP) which accepts several
classes at once (af11,af22,be). Classes are stored in bitmask (2 u32 words).
Many people made their variants of this patch, the ones I'm aware of are
(in alphabetic order):
Dmitrii Tejblum
Marcelo Araujo
Roman Bogorodskiy (novel)
Sergey Matveichuk (sem)
Sergey Ryabin
PR: kern/102471, kern/121122
MFC after: 2 weeks
Cleaner solution (e.g. adding another header) should be done here.
Original log:
Move several enums and structures required for L2 filtering from ip_fw_private.h to ip_fw.h.
Remove ipfw/ip_fw_private.h header from non-ipfw code.
Requested by: luigi
Approved by: kib(mentor)
net.inet.ip.fw.tables_max is now read-write.
- Bump IPFW_TABLES_MAX to 65535
Default number of tables is still 128
- Remove IPFW_TABLES_MAX from ipfw(8) code.
Sponsored by Yandex LLC
Approved by: kib(mentor)
MFC after: 2 weeks
- Add support for IPv6 and interface extended tables
- Make number of tables to be loader tunable in range 0..65534.
- Use IP_FW3 opcode for all new extended table cmds
No ABI changes are introduced. Old userland will see valid tables for
IPv4 tables and no entries otherwise. Flush works for any table.
IP_FW3 socket option is used to encapsulate all new opcodes:
/* IP_FW3 header/opcodes */
typedef struct _ip_fw3_opheader {
uint16_t opcode; /* Operation opcode */
uint16_t reserved[3]; /* Align to 64-bit boundary */
} ip_fw3_opheader;
New opcodes added:
IP_FW_TABLE_XADD, IP_FW_TABLE_XDEL, IP_FW_TABLE_XGETSIZE, IP_FW_TABLE_XLIST
ipfw(8) table argument parsing behavior is changed:
'ipfw table 999 add host' now assumes 'host' to be interface name instead of
hostname.
New tunable:
net.inet.ip.fw.tables_max controls number of table supported by ipfw in given
VNET instance. 128 is still the default value.
New syntax:
ipfw add skipto tablearg ip from any to any via table(42) in
ipfw add skipto tablearg ip from any to any via table(4242) out
This is a bit hackish, special interface name '\1' is used to signal interface
table number is passed in p.glob field.
Sponsored by Yandex LLC
Reviewed by: ae
Approved by: ae (mentor)
MFC after: 4 weeks
Distinguish IPv4 and IPv6 addresses and optional port numbers in
user space to set the option for the correct protocol family.
Add support in the kernel for carrying the new IPv6 destination
address and port.
Add support to TCP and UDP for IPv6 and fix UDP IPv4 to not change
the address in the IP header.
Add support for IPv6 forwarding to a non-local destination.
Add a regession test uitilizing VIMAGE to check all 20 possible
combinations I could think of.
Obtained from: David Dolson at Sandvine Incorporated
(original version for ipfw fwd IPv6 support)
Sponsored by: Sandvine Incorporated
PR: bin/117214
MFC after: 4 weeks
Approved by: re (kib)
possible to organize subroutines with rules.
The "call" action saves the current rule number in the internal
stack and rules processing continues from the first rule with
specified number (similar to skipto action). If later a rule with
"return" action is encountered, the processing returns to the first
rule with number of "call" rule saved in the stack plus one or higher.
Submitted by: Vadim Goncharov
Discussed by: ipfw@, luigi@
calculate required memory size dynamically.
- Fix races on chain re-lock.
- Introduce new field to ip_fw_chain - generation count. Now utilized
only in the NAT configuration, but can be utilized wider in ipfw.
- Get rid of NAT_BUF_LEN in ip_fw.h
PR: kern/143653
the "sockarg" ipfw option matches packets associated to
a local socket and with a non-zero so_user_cookie value.
The value is made available as tablearg, so it can be used
as a skipto target or pipe number in ipfw/dummynet rules.
Code by Paul Joe, manpage by me.
Submitted by: Paul Joe
MFC after: 1 week
dscp as a search key in table lookups;
+ (re)implement a sysctl variable to control the expire frequency of
pipes and queues when they become empty;
+ add 'queue number' as optional part of the flow_id. This can be
enabled with the command
queue X config mask queue ...
and makes it possible to support priority-based schedulers, where
packets should be grouped according to the priority and not some
fields in the 5-tuple.
This is implemented as follows:
- redefine a field in the ipfw_flow_id (in sys/netinet/ip_fw.h) but
without changing the size or shape of the structure, so there are
no ABI changes. On passing, also document how other fields are
used, and remove some useless assignments in ip_fw2.c
- implement small changes in the userland code to set/read the field;
- revise the functions in ip_dummynet.c to manipulate masks so they
also handle the additional field;
There are no ABI changes in this commit.
and tested over the past two months in the ipfw3-head branch. This
also happens to be the same code available in the Linux and Windows
ports of ipfw and dummynet.
The major enhancement is a completely restructured version of
dummynet, with support for different packet scheduling algorithms
(loadable at runtime), faster queue/pipe lookup, and a much cleaner
internal architecture and kernel/userland ABI which simplifies
future extensions.
In addition to the existing schedulers (FIFO and WF2Q+), we include
a Deficit Round Robin (DRR or RR for brevity) scheduler, and a new,
very fast version of WF2Q+ called QFQ.
Some test code is also present (in sys/netinet/ipfw/test) that
lets you build and test schedulers in userland.
Also, we have added a compatibility layer that understands requests
from the RELENG_7 and RELENG_8 versions of the /sbin/ipfw binaries,
and replies correctly (at least, it does its best; sometimes you
just cannot tell who sent the request and how to answer).
The compatibility layer should make it possible to MFC this code in a
relatively short time.
Some minor glitches (e.g. handling of ipfw set enable/disable,
and a workaround for a bug in RELENG_7's /sbin/ipfw) will be
fixed with separate commits.
CREDITS:
This work has been partly supported by the ONELAB2 project, and
mostly developed by Riccardo Panicucci and myself.
The code for the qfq scheduler is mostly from Fabio Checconi,
and Marta Carbone and Francesco Magno have helped with testing,
debugging and some bug fixes.
and remove all O(N) sequences from kernel critical sections in ipfw.
In detail:
1. introduce a IPFW_UH_LOCK to arbitrate requests from
the upper half of the kernel. Some things, such as 'ipfw show',
can be done holding this lock in read mode, whereas insert and
delete require IPFW_UH_WLOCK.
2. introduce a mapping structure to keep rules together. This replaces
the 'next' chain currently used in ipfw rules. At the moment
the map is a simple array (sorted by rule number and then rule_id),
so we can find a rule quickly instead of having to scan the list.
This reduces many expensive lookups from O(N) to O(log N).
3. when an expensive operation (such as insert or delete) is done
by userland, we grab IPFW_UH_WLOCK, create a new copy of the map
without blocking the bottom half of the kernel, then acquire
IPFW_WLOCK and quickly update pointers to the map and related info.
After dropping IPFW_LOCK we can then continue the cleanup protected
by IPFW_UH_LOCK. So userland still costs O(N) but the kernel side
is only blocked for O(1).
4. do not pass pointers to rules through dummynet, netgraph, divert etc,
but rather pass a <slot, chain_id, rulenum, rule_id> tuple.
We validate the slot index (in the array of #2) with chain_id,
and if successful do a O(1) dereference; otherwise, we can find
the rule in O(log N) through <rulenum, rule_id>
All the above does not change the userland/kernel ABI, though there
are some disgusting casts between pointers and uint32_t
Operation costs now are as follows:
Function Old Now Planned
-------------------------------------------------------------------
+ skipto X, non cached O(N) O(log N)
+ skipto X, cached O(1) O(1)
XXX dynamic rule lookup O(1) O(log N) O(1)
+ skipto tablearg O(N) O(1)
+ reinject, non cached O(N) O(log N)
+ reinject, cached O(1) O(1)
+ kernel blocked during setsockopt() O(N) O(1)
-------------------------------------------------------------------
The only (very small) regression is on dynamic rule lookup and this will
be fixed in a day or two, without changing the userland/kernel ABI
Supported by: Valeria Paoli
MFC after: 1 month
At this time we pull out from ip_fw2.c the logging functions, and
support for dynamic rules, and move kernel-only stuff into
netinet/ipfw/ip_fw_private.h
No ABI change involved in this commit, unless I made some mistake.
ip_fw.h has changed, though not in the userland-visible part.
Files touched by this commit:
conf/files
now references the two new source files
netinet/ip_fw.h
remove kernel-only definitions gone into netinet/ipfw/ip_fw_private.h.
netinet/ipfw/ip_fw_private.h
new file with kernel-specific ipfw definitions
netinet/ipfw/ip_fw_log.c
ipfw_log and related functions
netinet/ipfw/ip_fw_dynamic.c
code related to dynamic rules
netinet/ipfw/ip_fw2.c
removed the pieces that goes in the new files
netinet/ipfw/ip_fw_nat.c
minor rearrangement to remove LOOKUP_NAT from the
main headers. This require a new function pointer.
A bunch of other kernel files that included netinet/ip_fw.h now
require netinet/ipfw/ip_fw_private.h as well.
Not 100% sure i caught all of them.
MFC after: 1 month
so the size and alignment of the ipfw_insn is not compiler dependent.
No changes in the code generated by gcc.
There was only one instance of this kind in our entire source tree,
so i suspect the old definition was a poor choice (which i made).
MFC after: 3 days
