We've ifdef'd out the copyright strings for some time now. Go ahead and
remove the ifdefs. Plus whatever other detritis was left over from other
recent removals. These copyright strings are present in the comments and
are largely from CSRG's attempt at adding their copyright to every
binary file (which modern interpretations of the license doesn't
require).
Sponsored by: Netflix
Remove ancient SCCS tags from the tree, automated scripting, with two
minor fixup to keep things compiling. All the common forms in the tree
were removed with a perl script.
Sponsored by: Netflix
We have overused err(1), so it's hard to distinguish when an error is
very, very serious, and when it's just a user-error, or even harmless.
This patch changes the current behaviour to distinguish between the
following three:
1 for usage errors
2 for recoverable errors
3 or higher for unrecoverable errors
Reviewed by: jilles, pauamma_gundo.com, des
Differential Revision: https://reviews.freebsd.org/D27161
The cylinder group header structure ended with `u_int8_t cg_space[1]'
representing the beginning of the inode bitmap array. Some architectures
like the i386 rounded this up to a 4-byte boundry while other
architectures like the amd64 rounded it up to an 8-byte boundry.
Thus sizeof(struct cg) was four bytes bigger on an amd64 machine
than on an i386 machine. If a filesystem created on an i386 machine
was moved to an amd64 machine, the size of the cylinder group
calculated by the CGSIZE macro would appear to grow by four bytes.
Filesystems whose cylinder groups were exactly equal to the block
size on an i386 machine would appear to have a cylinder group that
was four bytes too big when moved to an amd64 machine. Note that
although the structure appears to be too big, it in fact is fine.
It is just the calaculation of its size that is in error.
The fix is to remove the cg_space element from the cylinder-group
structure so that the calculated size of the structure is the same
size on all architectures.
Reported by: Tijl Coosemans
Tested by: Tijl Coosemans and Peter Holm
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
The mntopts(3) functions support operations associated with a mount
point. The main purpose of this commit is to document the mntopts(3)
functions that now appear in 18 utilities in the base system. See
mntopts(3) for the documentation details.
The getmntopts() function appeared in 4.4BSD. The build_iovec(),
build_iovec_argf(), free_iovec(), checkpath(), and rmslashes()
functions were added with nmount(8) in FreeBSD 5.0. The getmntpoint()
and chkdoreload() functions are being added in this commit.
These functions should be in a library but for historic reasons are
in a file in the sources for the mount(8) program. Thus, to access
them the following lines need to be added to the Makefile of the
program wanting to use them:
SRCS+= getmntopts.c
MOUNT= ${SRCTOP}/sbin/mount
CFLAGS+= -I${MOUNT}
.PATH: ${MOUNT}
Once these changes have been MFC'ed to 13 they may be made into
a library.
Reviewed by: kib, gbe
MFC after: 2 weeks
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D37907
It's not really useful in a jail or in a mdroot or even if a users
wants to do a full zfs machine.
Reviewed by: mckusick
Differential Revision: https://reviews.freebsd.org/D36227
Rather than trying to shoehorn flags into the requested superblock
address, create a separate flags parameter to the ffs_sbget()
function in sys/ufs/ffs/ffs_subr.c. The ffs_sbget() function is
used both in the kernel and in user-level utilities through export
to the sbget() function in the libufs(3) library (see sbget(3)
for details). The kernel uses ffs_sbget() when mounting UFS
filesystems, in the glabel(8) and gjournal(8) GEOM utilities,
and in the standalone library used when booting the system
from a UFS root filesystem.
The ffs_sbget() function reads the superblock located at the byte
offset specified by its sblockloc parameter. The value UFS_STDSB
may be specified for sblockloc to request that the standard
location for the superblock be read.
The two existing options are now flags:
UFS_NOHASHFAIL will note if the check hash is wrong but will still
return the superblock. This is used by the bootstrap code to
give the system a chance to come up so that fsck can be run to
correct the problem.
UFS_NOMSG indicates that superblock inconsistency error messages
should not be printed. It is used by programs like fsck that
want to print their own error message and programs like glabel(8)
that just want to know if a UFS filesystem exists on a partition.
One additional flag is added:
UFS_NOCSUM causes only the superblock itself to be returned, but does
not read in any auxiliary data structures like the cylinder group
summary information. It is used by clients like glabel(8) that
just want to check for possible filesystem types. Using UFS_NOCSUM
skips the superblock checks for csum data which allows superblocks
that have corrupted csum data to be read and used.
The validate_sblock() function checks that the superblock has not
been corrupted in a way that can crash or hang the system. Unless
the UFS_NOMSG flag is specified, it will print out any errors that
it finds. Prior to this commit, validate_sblock() returned as soon
as it found an inconsistency so would print at most one message.
It now does all its checks so when UFS_NOMSG has not been specified
will print out everything that it finds inconsistent.
Sponsored by: The FreeBSD Foundation
When growing a UFS/FFS filesystem, the size of the summary information
may expand into additional blocks. These blocks must be removed from
fs_dsize which records the number of blocks in the filesystem that can
be used to hold filesystem data.
While here also update the fs_old_dsize and fs_old_size fields for
compatibility with kernels that were compiled before the addition
of UFS2.
Reported by: Edward Tomasz Napiera
MFC after: 1 week
For some cloud/virtualization use cases it can be convenient to grow the
filesystem on boot any time the disk/partition happens to be larger, but
not fail if it remains the same size.
Continue to emit a message if we have no action to take, but exit with
status 0 if the size remains the same.
Reviewed by: trasz
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D32856
growfs supports growing mounted filesystems (writes are temporarily
suspended while the grow happens). Drop the check for fs_clean == 0
to restore this case. Leave fs_flags check for FS_UNCLEAN or
FS_NEEDSFSCK which represent the state of the filesystem when it was
mounted, and fsck should be run first if they are set.
PR: 253754
Reviewed by: mckusick
MFC after: 3 days
Fixes: 6eb925f845 ("Filesystem utilities that modify the...")
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D29021
and fsirand(8)) should check the filesystem status and require that
fsck(8) be run if it is unclean. This requirement is not imposed on
fsdb(8) or clri(8) since they may be used to clean up a filesystem.
MFC after: 2 weeks
Sponsored by: Netflix
superblock has a check-hash error, an error message noting the
superblock check-hash failure is printed and the mount fails. The
administrator then runs fsck to repair the filesystem and when
successful, the filesystem can once again be mounted.
This approach fails if the filesystem in question is a root filesystem
from which you are trying to boot. Here, the loader fails when trying
to access the filesystem to get the kernel to boot. So it is necessary
to allow the loader to ignore the superblock check-hash error and make
a best effort to read the kernel. The filesystem may be suffiently
corrupted that the read attempt fails, but there is no harm in trying
since the loader makes no attempt to write to the filesystem.
Once the kernel is loaded and starts to run, it attempts to mount its
root filesystem. Once again, failure means that it breaks to its prompt
to ask where to get its root filesystem. Unless you have an alternate
root filesystem, you are stuck.
Since the root filesystem is initially mounted read-only, it is
safe to make an attempt to mount the root filesystem with the failed
superblock check-hash. Thus, when asked to mount a root filesystem
with a failed superblock check-hash, the kernel prints a warning
message that the root filesystem superblock check-hash needs repair,
but notes that it is ignoring the error and proceeding. It does
mark the filesystem as needing an fsck which prevents it from being
enabled for writing until fsck has been run on it. The net effect
is that the reboot fails to single user, but at least at that point
the administrator has the tools at hand to fix the problem.
Reported by: Rick Macklem (rmacklem@)
Discussed with: Warner Losh (imp@)
Sponsored by: Netflix
document the libufs interface for fetching and storing inodes.
The undocumented getino / putino interface has been replaced
with a new getinode / putinode interface.
Convert the utilities that had been using the undocumented
interface to use the new documented interface.
No functional change (as for now the libufs library does not
do inode check-hashes).
Reviewed by: kib
Tested by: Peter Holm
Sponsored by: Netflix
Specifically reading is done if ffs_sbget() and writing is done
in ffs_sbput(). These functions are exported to libufs via the
sbget() and sbput() functions which then used in the various
filesystem utilities. This work is in preparation for adding
subperblock check hashes.
No functional change intended.
Reviewed by: kib
The Software Package Data Exchange (SPDX) group provides a specification
to make it easier for automated tools to detect and summarize well known
opensource licenses. We are gradually adopting the specification, noting
that the tags are considered only advisory and do not, in any way,
superceed or replace the license texts.
Special thanks to Wind River for providing access to "The Duke of
Highlander" tool: an older (2014) run over FreeBSD tree was useful as a
starting point.
Initially, only tag files that use BSD 4-Clause "Original" license.
RelNotes: yes
Differential Revision: https://reviews.freebsd.org/D13133
The build was broken on GCC-using architectures with:
growfs.c: In function 'cgckhash':
growfs.c:1753: warning: old-style function definition
Sponsored by: The FreeBSD Foundation
This makes the needed changes to add/update cylinder group check hashes
when a filesystem is expanded.
Reported by: kib and Warner Losh (imp)
Reviewed by: kib
Tested by: Peter Holm (pho)
^/head@r323923 changed when MODIFIED is printed at exit. It's better to follow the
documented way of determining whether or not a filesystem is clean per fsck_ffs, i.e.,
ensure that the exit code is either 0 or 7.
The pass/fail determination is brittle prior to this commit, and ^/head@r323923 made
the issue apparent -- thus this needs to be fixed independent of ^/head@r323923.
PR: 222780
MFC after: 1 week
MFC with: r323923
Reported by: Jenkins
directories to SUBDIR.${MK_TESTS} idiom
This is being done to pave the way for future work (and homogenity) in
^/projects/make-check-sandbox .
No functional change intended.
MFC after: 1 weeks
to make the system "notice" the updated disk size.
(Relnotes, since I've forget to set it for "camcontrol reprobe", and
it's worth mentioning.)
MFC after: 1 month
Relnotes: yes
Sponsored by: The FreeBSD Foundation
after r298107
Summary of changes:
- Replace all instances of FILES/TESTS with ${PACKAGE}FILES. This ensures that
namespacing is kept with FILES appropriately, and that this shouldn't need
to be repeated if the namespace changes -- only the definition of PACKAGE
needs to be changed
- Allow PACKAGE to be overridden by callers instead of forcing it to always be
`tests`. In the event we get to the point where things can be split up
enough in the base system, it would make more sense to group the tests
with the blocks they're a part of, e.g. byacc with byacc-tests, etc
- Remove PACKAGE definitions where possible, i.e. where FILES wasn't used
previously.
- Remove unnecessary TESTSPACKAGE definitions; this has been elided into
bsd.tests.mk
- Remove unnecessary BINDIRs used previously with ${PACKAGE}FILES;
${PACKAGE}FILESDIR is now automatically defined in bsd.test.mk.
- Fix installation of files under data/ subdirectories in lib/libc/tests/hash
and lib/libc/tests/net/getaddrinfo
- Remove unnecessary .include <bsd.own.mk>s (some opportunistic cleanup)
Document the proposed changes in share/examples/tests/tests/... via examples
so it's clear that ${PACKAGES}FILES is the suggested way forward in terms of
replacing FILES. share/mk/bsd.README didn't seem like the appropriate method
of communicating that info.
MFC after: never probably
X-MFC with: r298107
PR: 209114
Relnotes: yes
Tested with: buildworld, installworld, checkworld; buildworld, packageworld
Sponsored by: EMC / Isilon Storage Division
netbsd-tests.test.mk (r289151)
- Eliminate explicit OBJTOP/SRCTOP setting
- Convert all ad hoc NetBSD test integration over to netbsd-tests.test.mk
- Remove unnecessary TESTSDIR setting
- Use SRCTOP where possible for clarity
MFC after: 2 weeks
Sponsored by: EMC / Isilon Storage Divison
Off by default, build behaves normally.
WITH_META_MODE we get auto objdir creation, the ability to
start build from anywhere in the tree.
Still need to add real targets under targets/ to build packages.
Differential Revision: D2796
Reviewed by: brooks imp
