and its associated constants. Implement _SC_IOV_MAX in the usual way.
Be a bit sloppy about the namespace question; this should get cleared up
in time for 5.0.
MFC after: 1 month
to fix the "-nostdinc WARNS=X" breakage caused by broken prototypes
for cabs() and cabsl() in <math.h>.
Reimplemented cabs() and cabsl() using new complex numbers types and
moved prototypes from <math.h> to <complex.h>.
this is not strictly compliant with XSI curses, it enables us to pass
const strings to many more functions that are actually const safe than
before. This should be harmless.
Requested by: lots of folks
of calling sigprocmask(). This matches the behaviour of thr_sigsetmask()
on Solaris; _pthread_sigmask_stub was added purely for compatibility
with Solaris (for TI-RPC), so it might as well do the same thing.
This fixes the problem where client RPC calls ignored all signals
for the complete duration of the RPC. This behaviour is currently
necessary in the threaded case due to locking issues, but was never
intended to occur in non-threaded programs.
Reviewed by: deischen
This work was based on kame-20010528-freebsd43-snap.tgz and some
critical problem after the snap was out were fixed.
There are many many changes since last KAME merge.
TODO:
- The definitions of SADB_* in sys/net/pfkeyv2.h are still different
from RFC2407/IANA assignment because of binary compatibility
issue. It should be fixed under 5-CURRENT.
- ip6po_m member of struct ip6_pktopts is no longer used. But, it
is still there because of binary compatibility issue. It should
be removed under 5-CURRENT.
Reviewed by: itojun
Obtained from: KAME
MFC after: 3 weeks
IPv6 transport-ready resolvers/DNS servers. Need careful configuration
when enable it. (default config is not affected).
See manpage for details.
XXX visible symbol __res_opt() is added, however, it is not supposed to be
called from outside, libc minor is not bumped.
Obtained from: KAME/NetBSD
Move common stuff into Makefile.inc, and tidy up all the Makefiles
as a result.
Build new modules.
Put a commented-out dependancy on libpam for the (shared) modules.
I can't bring this in just yet, as the dependancy (modules->libpam)
is reversed for the static case (libpam->modules).
pam_securetty silently succeeds if the user is on a secure tty
as defined by /etc/ttys.
pam_ftp does "anonymous ftp" style authentication with options for
specifying the anonymous user(s).
data pointer. This bug has been here since the ti-rpc import; it
apparently broke the clnt_control CLGET_SVC_ADDR options.
PR: misc/27813
Submitted by: Jean-Luc Richier <Jean-Luc.Richier@imag.fr>
there and compare the inode and device numbers to the values we remember,
to guard against the directory having been moved around in the meantime.
Reported by: Nick Cleaton <nick@cleaton.net>
For FTP control connection, keep the CRLF end-of-line termination
status in there.
Fixed the bug when the first FTP command in a session was ignored.
PR: 24048
MFC after: 1 week
real uid, saved uid, real gid, and saved gid to ucred, as well as the
pcred->pc_uidinfo, which was associated with the real uid, only rename
it to cr_ruidinfo so as not to conflict with cr_uidinfo, which
corresponds to the effective uid.
o Remove p_cred from struct proc; add p_ucred to struct proc, replacing
original macro that pointed.
p->p_ucred to p->p_cred->pc_ucred.
o Universally update code so that it makes use of ucred instead of pcred,
p->p_ucred instead of p->p_pcred, cr_ruidinfo instead of p_uidinfo,
cr_{r,sv}{u,g}id instead of p_*, etc.
o Remove pcred0 and its initialization from init_main.c; initialize
cr_ruidinfo there.
o Restruction many credential modification chunks to always crdup while
we figure out locking and optimizations; generally speaking, this
means moving to a structure like this:
newcred = crdup(oldcred);
...
p->p_ucred = newcred;
crfree(oldcred);
It's not race-free, but better than nothing. There are also races
in sys_process.c, all inter-process authorization, fork, exec, and
exit.
o Remove sigio->sio_ruid since sigio->sio_ucred now contains the ruid;
remove comments indicating that the old arrangement was a problem.
o Restructure exec1() a little to use newcred/oldcred arrangement, and
use improved uid management primitives.
o Clean up exit1() so as to do less work in credential cleanup due to
pcred removal.
o Clean up fork1() so as to do less work in credential cleanup and
allocation.
o Clean up ktrcanset() to take into account changes, and move to using
suser_xxx() instead of performing a direct uid==0 comparision.
o Improve commenting in various kern_prot.c credential modification
calls to better document current behavior. In a couple of places,
current behavior is a little questionable and we need to check
POSIX.1 to make sure it's "right". More commenting work still
remains to be done.
o Update credential management calls, such as crfree(), to take into
account new ruidinfo reference.
o Modify or add the following uid and gid helper routines:
change_euid()
change_egid()
change_ruid()
change_rgid()
change_svuid()
change_svgid()
In each case, the call now acts on a credential not a process, and as
such no longer requires more complicated process locking/etc. They
now assume the caller will do any necessary allocation of an
exclusive credential reference. Each is commented to document its
reference requirements.
o CANSIGIO() is simplified to require only credentials, not processes
and pcreds.
o Remove lots of (p_pcred==NULL) checks.
o Add an XXX to authorization code in nfs_lock.c, since it's
questionable, and needs to be considered carefully.
o Simplify posix4 authorization code to require only credentials, not
processes and pcreds. Note that this authorization, as well as
CANSIGIO(), needs to be updated to use the p_cansignal() and
p_cansched() centralized authorization routines, as they currently
do not take into account some desirable restrictions that are handled
by the centralized routines, as well as being inconsistent with other
similar authorization instances.
o Update libkvm to take these changes into account.
Obtained from: TrustedBSD Project
Reviewed by: green, bde, jhb, freebsd-arch, freebsd-audit
reason not to add it to others later). This causes the pam_unix
module to check the user's _own_ password, not the password of the
account that the user is authenticating into. This will allow eg:
WHEELSU type behaviour from su(1).
Tor created a while ago, removes the raw I/O piece (that has cache coherency
problems), and adds a buffer cache / VM freeing piece.
Essentially this patch causes O_DIRECT I/O to not be left in the cache, but
does not prevent it from going through the cache, hence the 80%. For
the last 20% we need a method by which the I/O can be issued directly to
buffer supplied by the user process and bypass the buffer cache entirely,
but still maintain cache coherency.
I also have the code working under -stable but the changes made to sys/file.h
may not be MFCable, so an MFC is not on the table yet.
Submitted by: tegge, dillon
keep track of a joiner. POSIX only supports a single joiner, so this
simplification is acceptable.
At the same time, make sure to mark a joined thread as detached so that
its resources can be freed.
Reviewed by: deischen
PR: 24345
accidentally clobber the server address if a stray packet arrived
at the client port. This would result in any further retransmits
going to the wrong address.
For now, fix this by not saving the source address of the reply; this
matches the pre-tirpc behaviour.
there is no need to wake all waiters to assure that the highest priority
thread is run. As the semaphore code is written, there was no correctness
problem, but the change improves sem_post() performance.
Pointed out by: deischen
history info as:
: .Sh STANDARDS If the command, library function or file adheres to a
: specific implementation such as IEEE Std 1003.2
: (``POSIX.2'') or ANSI X3.159-1989 (``ANSI C'') this
: should be noted here. If the command does not adhere
: to any standard, its history should be noted in the
: HISTORY section.
pam_krb5 is a Kerberos 5 (Heimdal) authentication module.
pam_nologin checks for /etc/nologin and does the "usual stuff"
if it is found, otherwise it silently succeeds.
pam_rootok silently succeeds if the user is root, otherwise
it fails.
pam_wheel silently succeeds if the user is a member of group
"wheel" (or another nominated group), and fails
otherwise.
There is an issue with kerberosIV and kerberos5 - if both are
being built, then static linking fails with duplicate symbols.
This will take a bit of work to sort out in the kerberii.
+ make Open_Disk sense the sector size by trying 512, 1024 and 2048
in this order. This makes the kernel note that
dscheck(cd1): bio_bcount 512 is not on a sector boundary (ssize 2048)
dscheck(cd1): bio_bcount 1024 is not on a sector boundary (ssize 2048)
if 2048 is the sector size. If this worries anyone: the message is from
/usr/src/sys/kern/subr_diskslice.c and shutups are to be placed there.
+ Have read_block and write_block use an additional parameter, the
sector size.
+ replace all barfout calls with return NULL, 0, __LINE__, etc.
Note that this does NOT emit diagnostics. More often than not,
you don't want library functions to scribble on stderr -- it may
not even be available. The right thing is to propagate the error
condition to upper management. The app should take care of errors.
+ use d1->sector_size instead of 512 in various places. I've left many
places untouched, especially those writing MBRs. I simply added
another arg hardcoded as 512. This is because I would not know what
I'm doing... I felt this approach would be reasonably backward
compatible and not introduce any new bugs in critical software.
Famous last words. Messing with MBRs might soon put me in the same
screwup meister category as, uh, never mind. :-)
+ bump the max no of disks from 20 to 32 (due to PR 24503).
PR: 8434 / 8436 / 24503
Submitted by: Jens Schweikhardt <schweikh@schweikhardt.net>
terminates the string in all cases, based on code from netstat(1).
The path in a sockaddr_un is terminated either by a '\0', or by
the end of the sockaddr as defined by sun_len.
Previously, the code could write the "safety" '\0' beyond the end
of the sockaddr (sockaddr_un's need only be large enough to store
sun_len bytes), and writing into the the supplied sockaddr is bad
anyway.
process on fork(2).
It is the supposed behavior stated in the manpage of sigaction(2), and
Solaris, NetBSD and FreeBSD 3-STABLE correctly do so.
The previous fix against libc_r/uthread/uthread_fork.c fixed the
problem only for the programs linked with libc_r, so back it out and
fix fork(2) itself to help those not linked with libc_r as well.
PR: kern/26705
Submitted by: KUROSAWA Takahiro <fwkg7679@mb.infoweb.ne.jp>
Tested by: knu, GOTOU Yuuzou <gotoyuzo@notwork.org>,
and some other people
Not objected by: hackers
MFC in: 3 days
placed in any scheduling queue(s). The process of dispatching
signals to a thread can change its state which will attempt to add
or remove the thread from any scheduling queue to which it belongs.
This can break some assertions if the thread isn't in the queue(s)
implied by its state.
When adding dispatching a pending signal to a thread, be sure to
remove the signal from the threads set of pending signals.
PR: 27035
Tested by: brian
MFC in: 1 week
longer includes machine/elf.h.
* consumers of elf.h now use the minimalist elf header possible.
This change is motivated by Binutils 2.11.0 and too much clashing over
our base elf headers and the Binutils elf headers.
address" string to a netbuf/sockaddr "transport address". In the
case of an AF_LOCAL address, it was missing the code to actually
point the netbuf at the newly allocated sockaddr_un, so the caller
ended up with a netbuf containing junk.
Submitted by: Martin Blapp <mb@imp.ch>
required by POSIX.1e. This maintains the current 'struct acl'
in the kernel while providing the generic external acl_t
interface required to complete the ACL editing library.
o Add the acl_get_entry() function.
o Convert the existing ACL utilities, getfacl and setfacl, to
fully make use of the ACL editing library.
Obtained from: TrustedBSD Project
The devinfo library provides access to the kernel's internal device
hierarchy and to the I/O resource manager. The library uses a
sysctl(9) interface to obtain a snapshot of the kernel's state which
is then made available to the application.
arguments where the format string is obtained from user data, or
otherwise difficult to verify statically.
Example usage:
printf(fmtcheck(user_format, standard_format), arg1, arg2);
checks the format string user_format for consistency (same number/order/
type of format operators) with standard_format. If they differ,
standard_format is used instead to avoid potential crashes or security
violations.
Obtained from: NetBSD
Reviewed by: -arch
instead of #pragma weak to create weak definitions. This macro is
improperly named, though, since a weak definition is not the same
thing as a weak reference.
Suggested by: bde
than the default buffer size in the old RPC code (8800 bytes), and
it could not be overriden by the application. This caused problems
with CFS (/usr/port/security/cfs).
Change this default back to UDPMSGSIZE (8800 bytes), but more
importantly, allow applications to use larger message sizes for
all protocols if desired. Choose an arbitrary maximum message size
of 256k instead of using the default as the maximum (which is
silly).
Reported by: ache
Reviewed by: alfred, Martin Blapp <mb@imp.ch>
functions.
- Place the acl_dup() description in alphabetical order.
- Move the POSIX.1e descriptions under the ENVIRONMENT section to the
STANDARDS section.
Reviewed by: rwatson
Obtained from: TrustedBSD Project
Makefile, add Makefile.inc needed for libc build; add
#include "namespace.h"/#include "un-namespace.h" pairs around the
includes of sys/acl.h and sys/capability.h, and an additional underscore
in front of the functions that will be overridden in libc_r.
Approved by: rwatson
Obtained from: TrustedBSD Project
`nc_error' variables. Move the nc_lock mutex from mt_misc.c to a
static variable within this function, since it is only used here.
Add a new getnetconfigent() error code `NC_NOTFOUND' to report the
case where the specified netid was not found. Set nc_error in all
error cases in getnetconfigent() so that the error messages returned
by nc_(s)perror are always meaningful.
Add a terminating \n to the output of nc_perror() to match both
our manpage and other implementations of this function.
Reviewed by: deischen, alfred, Martin Blapp <mb@imp.ch>
a "#pragma weak" directive linking the external symbol. This matches
the other pthread_* definitions, and ensures that users of this
function from within libc get the real version, not the stub.
Suggested by: deischen
Reviewed by: deischen, alfred
RPC clients hanging. The real problem turned out to be missing
cleanup code; this was fixed in clnt_vc.c r1.5 and clnt_dg.c r1.4.
Submitted by: Martin Blapp <mb@imp.ch>
so that the underscored versions of the pthread functions get
declared. This removes around 300 lines of 'implicit declaration
of XXX' warnings from the output of a libc build with -Wall.
Reviewed by: Martin Blapp <mb@imp.ch>, alfred
Also, looking to the future, don't assume all the world is an i386 and all
its disk layout brain damage will be repeated by other platforms. So all
the diking out if we are an Alpha, becomes adding in if we are an i386.
I've left out a couple of unused args between internal functions.
Use MAXPATHLEN, not MAXPATHLEN + 1 in a couple of places.
Pass a pointer to the end of the target filename space.
exactly the right size. Do it differently - pass a length rather than an
end-of-string+1 pointer as this is more convenient anyway. Get rid of
the bogus +1's.
to make asynchronous RPCs. This is needed to help fix ypbind, which can no
longer override the clnt_dg_call() method (formerly the clntudp_call()
method) due to all the internal descriptor locking code in TI-RPC. Turning
on this flag allows us to send an RPC request, then return immediately,
and handle a reply later, rather than being forced to do the request
and reply in a single function call.
Also fix a byte ordering bug: when clnt_dg_call() increments the XID
prior to transmitting a request, it uses the raw value, which is wrong.
The XID is stored in network byte order, i.e. big-endian. The CLSET_XID
and CLGET_XID commands in clnt_dg_control() use ntohl()/htonl() to get
the byte ordering right, but because clnt_dg_call() does not do this,
using CLSET_XID/CLGET_XID doesn't actually work, unless you're on a
big endian host, which we aren't (yet). Fix clnt_dg_call() to byte swap
properly when doing the increment.
Some of the major changes include:
- The SCSI error handling portion of cam_periph_error() has
been broken out into a number of subfunctions to better
modularize the code that handles the hierarchy of SCSI errors.
As a result, the code is now much easier to read.
- String handling and error printing has been significantly
revamped. We now use sbufs to do string formatting instead
of using printfs (for the kernel) and snprintf/strncat (for
userland) as before.
There is a new catchall error printing routine,
cam_error_print() and its string-based counterpart,
cam_error_string() that allow the kernel and userland
applications to pass in a CCB and have errors printed out
properly, whether or not they're SCSI errors. Among other
things, this helped eliminate a fair amount of duplicate code
in camcontrol.
We now print out more information than before, including
the CAM status and SCSI status and the error recovery action
taken to remedy the problem.
- sbufs are now available in userland, via libsbuf. This
change was necessary since most of the error printing code
is shared between libcam and the kernel.
- A new transfer settings interface is included in this checkin.
This code is #ifdef'ed out, and is primarily intended to aid
discussion with HBA driver authors on the final form the
interface should take. There is example code in the ahc(4)
driver that implements the HBA driver side of the new
interface. The new transfer settings code won't be enabled
until we're ready to switch all HBA drivers over to the new
interface.
src/Makefile.inc1,
lib/Makefile: Add libsbuf. It must be built before libcam,
since libcam uses sbuf routines.
libcam/Makefile: libcam now depends on libsbuf.
libsbuf/Makefile: Add a makefile for libsbuf. This pulls in the
sbuf sources from sys/kern.
bsd.libnames.mk: Add LIBSBUF.
camcontrol/Makefile: Add -lsbuf. Since camcontrol is statically
linked, we can't depend on the dynamic linker
to pull in libsbuf.
camcontrol.c: Use cam_error_print() instead of checking for
CAM_SCSI_STATUS_ERROR on every failed CCB.
sbuf.9: Change the prototypes for sbuf_cat() and
sbuf_cpy() so that the source string is now a
const char *. This is more in line wth the
standard system string functions, and helps
eliminate warnings when dealing with a const
source buffer.
Fix a typo.
cam.c: Add description strings for the various CAM
error status values, as well as routines to
look up those strings.
Add new cam_error_string() and
cam_error_print() routines for userland and
the kernel.
cam.h: Add a new CAM flag, CAM_RETRY_SELTO.
Add enumerated types for the various options
available with cam_error_print() and
cam_error_string().
cam_ccb.h: Add new transfer negotiation structures/types.
Change inq_len in the ccb_getdev structure to
be "reserved". This field has never been
filled in, and will be removed when we next
bump the CAM version.
cam_debug.h: Fix typo.
cam_periph.c: Modularize cam_periph_error(). The SCSI error
handling part of cam_periph_error() is now
in camperiphscsistatuserror() and
camperiphscsisenseerror().
In cam_periph_lock(), increase the reference
count on the periph while we wait for our lock
attempt to succeed so that the periph won't go
away while we're sleeping.
cam_xpt.c: Add new transfer negotiation code. (ifdefed
out)
Add a new function, xpt_path_string(). This
is a string/sbuf analog to xpt_print_path().
scsi_all.c: Revamp string handing and error printing code.
We now use sbufs for much of the string
formatting code. More of that code is shared
between userland the kernel.
scsi_all.h: Get rid of SS_TURSTART, it wasn't terribly
useful in the first place.
Add a new error action, SS_REQSENSE. (Send a
request sense and then retry the command.)
This is useful when the controller hasn't
performed autosense for some reason.
Change the default actions around a bit.
scsi_cd.c,
scsi_da.c,
scsi_pt.c,
scsi_ses.c: SF_RETRY_SELTO -> CAM_RETRY_SELTO. Selection
timeouts shouldn't be covered by a sense flag.
scsi_pass.[ch]: SF_RETRY_SELTO -> CAM_RETRY_SELTO.
Get rid of the last vestiges of a read/write
interface.
libkern/bsearch.c,
sys/libkern.h,
conf/files: Add bsearch.c, which is needed for some of the
new table lookup routines.
aic7xxx_freebsd.c: Define AHC_NEW_TRAN_SETTINGS if
CAM_NEW_TRAN_CODE is defined.
sbuf.h,
subr_sbuf.c: Add the appropriate #ifdefs so sbufs can
compile and run in userland.
Change sbuf_printf() to use vsnprintf()
instead of kvprintf(), which is only available
in the kernel.
Change the source string for sbuf_cpy() and
sbuf_cat() to be a const char *.
Add __BEGIN_DECLS and __END_DECLS around
function prototypes since they're now exported
to userland.
kdump/mkioctls: Include stdio.h before cam.h since cam.h now
includes a function with a FILE * argument.
Submitted by: gibbs (mostly)
Reviewed by: jdp, marcel (libsbuf makefile changes)
Reviewed by: des (sbuf changes)
Reviewed by: ken
o Revise description in light of commits over last month including:
- ACL editing library is now implemented
- ACLs are now implemented
Obtained from: TrustedBSD Project
because libc/rpc/key_call.c references uname(), and ps/print.c also
defines uname(), and ps is linked statically. This leads to a symbol
clash. The userland uname(3) kinda sucked anyway as the hostname
etc was too short. And since the libc rpc interface now uses
the utsname.nodename which gets truncated, I was tempted into doing
something about it. Create a new userland uname function, called
__xuname() which takes an extra argument that allows you to change
the size of the fields. uname() becomes a static inline function
in sys/utsname.h that passes the extra argument in. struct utsname
has its field members expanded by default now in userland.
We still provide a 'uname' externally linkable function for things
that either think that they ``know'' the utsname format and assume
32 character strings and bypass the include file, or objects that
are linked against old libcs. ie: just about every plausible
case that I can think of is covered. Should we ever change the
default lengths again, a libc major bump should not be required
as the size is now passed to the function.
XXX the uname(2) in the kernel is for FreeBSD 1.1 binary compatability!
All the uname(3) functions that are exported to userland are actually
implemented in libc with sysctl. uname(1) uses sysctl directly and
does not call uname(3).
PR: bin/4688
acl_add_perm, acl_clear_perms, acl_copy_entry, acl_create_entry,
acl_delete_perm, acl_get_permset, acl_get_qualifier, acl_get_tag_type,
acl_set_permset, acl_set_qualifier, acl_set_tag_type
This brings us within 4 functions of a full ACL editing library.
Reviewed by: rwatson
Make struct cmessage visible from socket.h (about 4 places were
defining it for themselves which wasn't good)
Make __rpc_get_local_uid() useable and give it prototype that's
visible.
Fix some issues with printing out usernames from rpcbind and keyserv.
changed. These were taken from the 4.2-RELEASE dist on ftp.freebsd.org.
This will be MFC'd shortly as it is required in RELENG_4 to maintain
compatability with binaries linked against these libraries.
should have been repo-copied from it in the first place.
Apply all of our fixes up to and including revision 1.14 to
the original rpc.3 manpage, including conversion to mdoc(7).
number of paths which glob(3) will return. Remove the hardcoded limit
from the last commit, which restores the previous unbounded behavior.
Document the new flag in the manual page.
associated changes that had to happen to make this possible as well as
bugs fixed along the way.
Bring in required TLI library routines to support this.
Since we don't support TLI we've essentially copied what NetBSD
has done, adding a thin layer to emulate direct the TLI calls
into BSD socket calls.
This is mostly from Sun's tirpc release that was made in 1994,
however some fixes were backported from the 1999 release (supposedly
only made available after this porting effort was underway).
The submitter has agreed to continue on and bring us up to the
1999 release.
Several key features are introduced with this update:
Client calls are thread safe. (1999 code has server side thread
safe)
Updated, a more modern interface.
Many userland updates were done to bring the code up to par with
the recent RPC API.
There is an update to the pthreads library, a function
pthread_main_np() was added to emulate a function of Sun's threads
library.
While we're at it, bring in NetBSD's lockd, it's been far too
long of a wait.
New rpcbind(8) replaces portmap(8) (supporting communication over
an authenticated Unix-domain socket, and by default only allowing
set and unset requests over that channel). It's much more secure
than the old portmapper.
Umount(8), mountd(8), mount_nfs(8), nfsd(8) have also been upgraded
to support TI-RPC and to support IPV6.
Umount(8) is also fixed to unmount pathnames longer than 80 chars,
which are currently truncated by the Kernel statfs structure.
Submitted by: Martin Blapp <mb@imp.ch>
Manpage review: ru
Secure RPC implemented by: wpaul
- lowercase Nd argument
- mark function arguments with Fa
- mark defined values with Dv
- simply copying POSIX text for RETURN VALUES and ERRORS sections is not
always a good idea. POSIX uses the word "shall" indicating the behavior
the correct implementation should follow.
reserved word, causing breakage when a C++ program included libutil.h
This change will be propagated elsewhere shortly.
Submitted by: jkh
Obtained from: TrustedBSD Project
o acl_calc_mask(): calculates the ACL mask entry associated with
the given ACL.
o acl_delete_entry(): remove a specified ACL entry from the given
ACL.
Approved by: rwatson
`err()'). libdisk does! and additionally libdisk gets confused on Alpha
disks with foreign disklabels, throws up its hands and exits. This is
the cause of the "going no where without my init" install bug on the Alpha.
So now on the Alpha, rather than call err(), we print the error string and
continue processing.
Submitted by: jkh
since they not allows POSIXly legal locale data. Currently, if relaxed form
POSIXly legal locale data will be used right now, some programs will be broken,
but it means that either locale data or programs must be fixed, not the library.
Introduce non-standard md_order (month/day order) locale field to be used later
via nl_langinfo(). Currently %EF and %Ef emulated using this field, but they
planned for remove in future in favour of nl_langinfo() test field.
Implement %F per POSIX
char *
FooFileChunk(const char *filename, char *buf, off_t offset, off_t length)
Which only hashes part of a file.
Implement FooFile() in terms of this function.
Submitted by: roam
is currently set to 10000. This is intended to prevent glob from running
amok when a highly recursive path is provided (such as "../*/../*/../*/...")
Reviewed by: Diane Bruce <db@db.net>, jhb
utility functions which convert between string namespace names and
numeric constants used by the interface. Right now, two namespaces
are supported, EXTATTR_NAMESPACE_SYSTEM ("system") and
EXTATTR_NAMESPACE_USER ("user"). These functions are used by
various userland EA utilities, rather than hard coding the routines
all over the place.
Obtained from: TrustedBSD Project
o Rename internal library functions so that they are prefixed with
_posix1e or _POSIX1E, removing them from the application namespace (and
potential conflict with other ACL functions elsewhere in the system).
Obtained from: TrustedBSD Project
gratuitous difference between us and our sister project.
This was given to me _ages_ ago. May apologies to Paul for the length
of time its taken me to commit.
Obtained from: Niels Provos <provos@physnet.uni-hamburg.de>/OpenBSD
Submitted by: Paul Herman <pherman@frenchfries.net>
Reviewed by: David Cross <dec@freebsd.org>, jkh <jkh@freebsd.org>
Approved by: jkh <jkh@freebsd.org>
Obtained from: Ian Dowse <iedowse@maths.tcd.ie>, David Cross <dec@freebsd.org>
We have been running this patch on a production NIS server for 2.5 weeks now.
Normally we would have ypserv die at least once a week, and often many times
a day.
This patch treats and error from select as zeroing out the FD_SET to indicate
that no fds are ready for reading. This is safe because the rpc code
always re-inits the FDSET before calling select.
The below text is quoted from the latest POSIX draft:
: The values of locale categories shall be determined by a precedence
: order; the first condition met below determines the value:
:
: 1. If the LC_ALL environment variable is defined and is not null,
: the value of LC_ALL shall be used.
: 2. If the LC_* environment variable (LC_COLLATE, LC_CTYPE, LC_MESSAGES,
: LC_MONETARY, LC_NUMERIC, LC_TIME) is defined and is not null, the
: value of the environment variable shall be used to initialize the
: category that corresponds to the environment variable.
: 3. If the LANG environment variable is defined and is not null, the
: value of the LANG environment variable shall be used.
: 4. If the LANG environment variable is not set or is set to the empty
: string, the implementation-defined default locale shall be used.
The conditions 1 and 2 were interchanged, i.e., LC_* were looked first,
then LC_ALL, then LANG (note that LC_ALL and LANG were essentially the
same, providing the default, with LC_ALL taking precedence over LANG).
Now, LC_ALL and LANG serve the different purposes. LC_ALL overrides
any LC_*, and LANG provides the default fallback.
Testcase:
/usr/bin/env LC_ALL=C LC_TIME=de_DE.ISO_8859-1 /bin/date
Should return date in the "C" locale format.
Inspired by: date(1) reference page in the Draft
lock definitions to it. flockfile state is now allocated
along with the rest of FILE. This eliminates the need for a
separate allocation of flockfile state as well as eliminating
the mutex/lock used to serialize its allocation.
Even better formula from random() could not be intetgrated because rand_r()
supposed to store its state in the single variable (but table needed for
random() algorithm integration).
- new EV_SET macro,
- NOTE_LOWAT option for low water marks on read/write filters,
- NOTE_REVOKE for filesystem unmounting (and revoke() calls)
- improved API for EVFILT_AIO
sysctls exporting swap information. When running on a live kernel,
the sysctl's will now be used instead of kvm_read, allowing consumers of
this interface to run without privilege (setgid kmem). Retain the
ability to run on coredumps, or on a kernel using kmem if explicitly
pointed at one.
A side effect of this change is that kvm_getswapinfo() is faster now in
the general case. If the SWIF_DUMP_TREE flag is given (pstat -ss does
this), the radix tree walker, which still uses kvm_read in any case, is
invoked, and therefore does require privilege.
Submitted by: Thomas Moestl <tmoestl@gmx.net>
Reviewed by: freebsd-audit
This is about to be replaced anyway by initialization explicitly
instead of lazily, and reducing the complexity of it. As it is
now, this will work fine, however.
