processes and do not rely on EOF due to a close() in the debugger.
PR: 200489
Differential Revision: https://reviews.freebsd.org/D2674
Reviewed by: kib, ngie, rodrigc
traced by another process such as a debugger). The parent process does
need to check for matching orphan pids to avoid returning ECHILD if an
orphan has exited, but it should not return the exited status for the
child until after the debugger has detached from the orphan process
either explicitly or implicitly via wait().
Add two tests for for this case: one where the debugger is the direct
child (thus the parent has a non-empty children list) and one where
the debugger is not a direct child (so the only "child" of the parent
is the orphan).
Differential Revision: https://reviews.freebsd.org/D2644
Reviewed by: kib
MFC after: 2 weeks
not the old parent. Otherwise, proc_reap() will leave the zombie in place
resulting in the process' status being returned twice to its parent.
Add test cases for PT_TRACE_ME and PT_ATTACH which are fixed by
this change.
Differential Revision: https://reviews.freebsd.org/D2594
Reviewed by: kib
MFC after: 2 weeks
This is being done to fix breakage with make distribution with read-only
source trees as make distribution doesn't use make obj like building
tests/ does in all cases
Reported by: Wolfgang Zenker <wolfgang@lyxys.ka.sub.org>
Suggested by: jhb
X-MFC with: r282059
MFC after: 1 week
no longer bombs out
PLAIN_REQUIRE_KERNEL_MODULE: use printf + _exit, no err so the testcase no
longer bombs out if it prints to stderr
MFC after: 5 days
As jhb noted, the actual mmap(2) implementation is under sys/vm, not
sys/kern/, so the correct logical place is tests/sys/vm/, not
tests/sys/kern/
X-MFC with: r282076
MFC after: 6 days
for counter mode), and AES-GCM. Both of these modes have been added to
the aesni module.
Included is a set of tests to validate that the software and aesni
module calculate the correct values. These use the NIST KAT test
vectors. To run the test, you will need to install a soon to be
committed port, nist-kat that will install the vectors. Using a port
is necessary as the test vectors are around 25MB.
All the man pages were updated. I have added a new man page, crypto.7,
which includes a description of how to use each mode. All the new modes
and some other AES modes are present. It would be good for someone
else to go through and document the other modes.
A new ioctl was added to support AEAD modes which AES-GCM is one of them.
Without this ioctl, it is not possible to test AEAD modes from userland.
Add a timing safe bcmp for use to compare MACs. Previously we were using
bcmp which could leak timing info and result in the ability to forge
messages.
Add a minor optimization to the aesni module so that single segment
mbufs don't get copied and instead are updated in place. The aesni
module needs to be updated to support blocked IO so segmented mbufs
don't have to be copied.
We require that the IV be specified for all calls for both GCM and ICM.
This is to ensure proper use of these functions.
Obtained from: p4: //depot/projects/opencrypto
Relnotes: yes
Sponsored by: FreeBSD Foundation
Sponsored by: NetGate
Using PROG instead of PROGS will in cases of high -j with -DNO_ROOT cause
the PROG to show up more than once as it's handling the SCRIPTS install case
in a recursive manner, separate from the non-recursive case
After the recent batch of commits to bsd.progs.mk to fix behavior with how
variables are defaulted to, explicitly setting SRCS for a PROG is no longer
required
MFC after: 1 week
Reviewed by: asomers
Phabric: D1130
Sponsored by: EMC / Isilon Storage Division
This causes the directory traversing Kyuafile to be installed, which in turn
causes tests/sys/pjdfstest to always be run from /usr/tests/sys
Let KYUAFILE default to auto, so the file generated by suite.test.mk gets
installed instead
MFC after: 1 week
pjdfstest execution is opt-in and must be done as root due to some of the
assumptions made by the test suite and lack of error checking in the non-root
case
A description of how to execute pjdfstest with kyua is provided in
share/pjdfstest/README
Phabric: D824 (an earlier prototype patch)
MFC after: 1 month
Relnotes: yes
Sponsored by: EMC / Isilon Storage Division
fibs. Use the mbuf's or the socket's fib instead of RT_ALL_FIBS. Fixes PR
187553. Also fixes netperf's UDP_STREAM test on a nondefault fib.
sys/netinet/ip_output.c
In ip_output, lookup the source address using the mbuf's fib instead
of RT_ALL_FIBS.
sys/netinet/in_pcb.c
in in_pcbladdr, lookup the source address using the socket's fib,
because we don't seem to have the mbuf fib. They should be the same,
though.
tests/sys/net/fibs_test.sh
Clear the expected failure on udp_dontroute.
PR: 187553
CR: https://reviews.freebsd.org/D772
MFC after: 3 weeks
Sponsored by: Spectra Logic
tests/sys/kern/unix_seqpacket_test.c
* Remove a duplicate error check in mk_pair_of_sockets
* Always close sockets in the success path of ATF test cases. Don't
bother with the error paths, because those are mostly assertions
anyway. Most of these socket leaks were reported by Coverity.
All of them are harmless, because each ATF test case runs in its
own process.
* Fix the len argument to send in shutdown_send and
shutdown_send_sigpipe. The old version was using sizeof a pointer
instead of sizeof the char array. Reported by Coverity.
* Change a few ATF_CHECK to ATF_REQUIRE if the test can't reasonably
continue past a failure.
Reported by: Coverity Scan
CID: 1229995, 1229991, 1229988, 1229994, 1229989, 1229992
CID: 1229993, 1229990, 1229984, 1229967, 1230005, 1229977
CID: 1229966, 1230004, 1229976
MFC after: 1 week
Sponsored by: Spectra Logic
ifa_ifwithnet() and ifa_ifwithdstaddr() The legacy functions will call the
_fib() versions with RT_ALL_FIBS, preserving legacy behavior.
sys/net/if_var.h
sys/net/if.c
Add legacy-compatible functions as described above. Ensure legacy
behavior when RT_ALL_FIBS is passed as fibnum.
sys/netinet/in_pcb.c
sys/netinet/ip_output.c
sys/netinet/ip_options.c
sys/net/route.c
sys/net/rtsock.c
sys/netinet6/nd6.c
Call with _fib() functions if we must use a specific fib, or the
legacy functions otherwise.
tests/sys/netinet/fibs_test.sh
tests/sys/netinet/udp_dontroute.c
Improve the udp_dontroute test. The bug that this test exercises is
that ifa_ifwithnet() will return the wrong address, if multiple
interfaces have addresses on the same subnet but with different
fibs. The previous version of the test only considered one possible
failure mode: that ifa_ifwithnet_fib() might fail to find any
suitable address at all. The new version also checks whether
ifa_ifwithnet_fib() finds the correct address by checking where the
ARP request goes.
Reported by: bz, hrs
Reviewed by: hrs
MFC after: 1 week
X-MFC-with: 264905
Sponsored by: Spectra Logic
exists on another interface. The panic was introduced by change 264887, which
changed the fibnum parameter in the call to rtalloc1_fib() in
ifa_switch_loopback_route() from RT_DEFAULT_FIB to RT_ALL_FIBS. The solution
is to use the interface fib in that call. For the majority of users, that will
be equivalent to the legacy behavior.
PR: kern/189089
Reported by: neel
Reviewed by: neel
MFC after: 3 weeks
X-MFC with: 264887
Sponsored by: Spectra Logic
These two bugs are closely related. The root cause is that ifa_ifwithnet
does not consider FIBs when searching for an interface address.
sys/net/if_var.h
sys/net/if.c
Add a fib argument to ifa_ifwithnet and ifa_ifwithdstadddr. Those
functions will only return an address whose interface fib equals the
argument.
sys/net/route.c
Update calls to ifa_ifwithnet and ifa_ifwithdstaddr with fib
arguments.
sys/netinet/in.c
Update in_addprefix to consider the interface fib when adding
prefixes. This will prevent it from not adding a subnet route when
one already exists on a different fib.
sys/net/rtsock.c
sys/netinet/in_pcb.c
sys/netinet/ip_output.c
sys/netinet/ip_options.c
sys/netinet6/nd6.c
Add RT_DEFAULT_FIB arguments to ifa_ifwithdstaddr and ifa_ifwithnet.
In some cases it there wasn't a clear specific fib number to use.
In others, I was unable to test those functions so I chose
RT_DEFAULT_FIB to minimize divergence from current behavior. I will
fix some of the latter changes along with PR kern/187553.
tests/sys/netinet/fibs_test.sh
tests/sys/netinet/udp_dontroute.c
tests/sys/netinet/Makefile
Revert r263738. The udp_dontroute test was right all along.
However, bugs kern/187550 and kern/187553 cancelled each other out
when it came to this test. Because of kern/187553, ifa_ifwithnet
searched the default fib instead of the requested one, but because
of kern/187550, there was an applicable subnet route on the default
fib. The new test added in r263738 doesn't work right, however. I
can verify with dtrace that ifa_ifwithnet returned the wrong address
before I applied this commit, but route(8) miraculously found the
correct interface to use anyway. I don't know how.
Clear expected failure messages for kern/187550 and kern/187552.
PR: kern/187550
PR: kern/187552
Reviewed by: melifaro
MFC after: 3 weeks
Sponsored by: Spectra Logic
sys/net/route.c
In rtinit1, use the interface fib instead of the process fib. The
latter wasn't very useful because ifconfig(8) is usually invoked
with the default process fib. Changing ifconfig(8) to use setfib(2)
would be redundant, because it already sets the interface fib.
tests/sys/netinet/fibs_test.sh
Clear the expected ATF failure
sys/net/if.c
Pass the interface fib in calls to rtrequest1_fib and rtalloc1_fib
sys/netinet/in.c
sys/net/if_var.h
Add a fibnum argument to ifa_switch_loopback_route, a subroutine of
in_scrubprefix. Pass it the interface fib.
PR: kern/187549
Reviewed by: melifaro
MFC after: 3 weeks
Sponsored by: Spectra Logic Corporation
restricted to a single FIB in a multifib system.
Restricting an interface's routes to the FIB to which it is assigned (by
setting net.add_addr_allfibs=0) causes ARP updates to fail with "arpresolve:
can't allocate llinfo for x.x.x.x". This is due to the ARP update code hard
coding it's lookup for existing routing entries to FIB 0.
sys/netinet/in.c:
When dealing with RTM_ADD (add route) requests for an interface, use
the interface's assigned FIB instead of the default (FIB 0).
sys/netinet/if_ether.c:
In arpresolve(), enhance error message generated when an
lla_lookup() fails so that the interface causing the error is
visible in logs.
tests/sys/netinet/fibs_test.sh
Clear ATF expected error.
PR: kern/167947
Submitted by: Nikolay Denev <ndenev@gmail.com> (previous version)
Reviewed by: melifaro
MFC after: 3 weeks
Sponsored by: Spectra Logic Corporation
tests/sys/netinet/fibs.sh
Replace fibs:udp_dontroute with fibs:src_addr_selection_by_subnet.
The original test was poorly written; it was actually testing
kern/167947 instead of the desired kern/187553. The root cause of the
bug is that ifa_ifwithnet did not have a fib argument. The new test
more directly targets that behavior.
tests/sys/netinet/udp_dontroute.c
Delete the auxilliary binary used by the old test
PR: kern/187553
MFC after: 3 weeks
Sponsored by: Spectra Logic Corporation
Change {atf,plain,tap}.test.mk to be internal implementation details of
bsd.test.mk. Makefiles that build tests should now only include bsd.test.mk
and declaratively specify what they want to build, without worrying about
the internal implementation of the mk files.
The reason for this change is to permit building test programs of different
interfaces from a single directory, which is something I had a need for
while porting tests over from src/tools/regression/.
Additionally, this change makes it possible to perform some other requested
changes to bsd.test.mk in an easier manner. Coming soon.
mechanism, based on the new SB_STOP sockbuf flag. The old hack dynamically
changed the sending sockbuf's high water mark whenever adding or removing
data from the receiving sockbuf. It worked for stream sockets, but it never
worked for SOCK_SEQPACKET sockets because of their atomic nature. If the
sockbuf was partially full, it might return EMSGSIZE instead of blocking.
The new solution is based on DragonFlyBSD's fix from commit
3a6117bbe0ed6a87605c1e43e12a1438d8844380 on 2008-05-27. It adds an SB_STOP
flag to sockbufs. Whenever uipc_send surpasses the socket's size limit, it
sets SB_STOP on the sending sockbuf. sbspace() will then return 0 for that
sockbuf, causing sosend_generic and friends to block. uipc_rcvd will
likewise clear SB_STOP. There are two fringe benefits: uipc_{send,rcvd} no
longer need to call chgsbsize() on every send and receive because they don't
change the sockbuf's high water mark. Also, uipc_sense no longer needs to
acquire the UIPC linkage lock, because it's simpler to compute the
st_blksizes.
There is one drawback: since sbspace() will only ever return 0 or the
maximum, sosend_generic will allow the sockbuf to exceed its nominal maximum
size by at most one packet of size less than the max. I don't think that's
a serious problem. In fact, I'm not even positive that FreeBSD guarantees a
socket will always stay within its nominal size limit.
sys/sys/sockbuf.h
Add the SB_STOP flag and adjust sbspace()
sys/sys/unpcb.h
Delete the obsolete unp_cc and unp_mbcnt fields from struct unpcb.
sys/kern/uipc_usrreq.c
Adjust uipc_rcvd, uipc_send, and uipc_sense to use the SB_STOP
backpressure mechanism. Removing obsolete unpcb fields from
db_show_unpcb.
tests/sys/kern/unix_seqpacket_test.c
Clear expected failures from ATF.
Obtained from: DragonFly BSD
PR: kern/185812
Reviewed by: silence from freebsd-net@ and rwatson@
MFC after: 3 weeks
Sponsored by: Spectra Logic Corporation
Set WARNS=5 for all files in this directory
kern/unix_seqpacket_test.c
Fix compiler warnings. Most were benign, but rcvbuf_oversized
wasn't working as intended because I forgot to set the buffer sizes.
MFC after: 2 weeks
Reported by: pho
Sponsored by: Spectra Logic Corporation
buffers drop packets". It was caused by a check for the space available
in a sockbuf, but it was checking the wrong sockbuf.
sys/sys/sockbuf.h
sys/kern/uipc_sockbuf.c
Add sbappendaddr_nospacecheck_locked(), which is just like
sbappendaddr_locked but doesn't validate the receiving socket's
space. Factor out common code into sbappendaddr_locked_internal().
We shouldn't simply make sbappendaddr_locked check the space and
then call sbappendaddr_nospacecheck_locked, because that would cause
the O(n) function m_length to be called twice.
sys/kern/uipc_usrreq.c
Use sbappendaddr_nospacecheck_locked for SOCK_SEQPACKET sockets,
because the receiving sockbuf's size limit is irrelevant.
tests/sys/kern/unix_seqpacket_test.c
Now that 185813 is fixed, pipe_128k_8k fails intermittently due to
185812. Make it fail every time by adding a usleep after starting
the writer thread and before starting the reader thread in
test_pipe. That gives the writer time to fill up its send buffer.
Also, clear the expected failure message due to 185813. It actually
said "185812", but that was a typo.
PR: kern/185813
Reviewed by: silence from freebsd-net@ and rwatson@
MFC after: 3 weeks
Sponsored by: Spectra Logic Corporation
