Brooks Davis
772670ea02
Use the length of the interface name, not the length of its address when
...
printing the name.
Approved by: brian
2004-01-21 22:00:50 +00:00
Tom Rhodes
dd58592ca1
Xref the proper manual pages.
...
PR: 60999
Submitted by: Marc Silver <marcs@draenor.org>
2004-01-12 16:10:38 +00:00
Hartmut Brandt
89624a3490
Replace all uses of the old netgraph constants NG_*LEN by the new
...
constants NG_*SIZ that include the trailing NUL byte. This change
is mostly mechanical except for the replacement of a couple of snprintf()
and sprintf() calls with strlcpy.
2003-11-15 15:26:35 +00:00
Brian Somers
fb5a1d9297
Ignore case when comparing CHAP/CHAP81 responses
...
PR: 31771
2003-11-10 21:56:02 +00:00
Ruslan Ermilov
96fd764f25
Basic PAM authentication support.
2003-10-29 20:32:19 +00:00
Joe Marcus Clarke
b07fbc17e9
Add Cisco Skinny Station protocol support to libalias, natd, and ppp.
...
Skinny is the protocol used by Cisco IP phones to talk to Cisco Call
Managers. With this code, one can use a Cisco IP phone behind a FreeBSD
NAT gateway.
Currently, having the Call Manager behind the NAT gateway is not supported.
More information on enabling Skinny support in libalias, natd, and ppp
can be found in those applications' manpages.
PR: 55843
Reviewed by: ru
Approved by: ru
MFC after: 30 days
2003-09-23 07:41:55 +00:00
Mark Murray
0ff67a254e
Hide more crypto from being crunched at release time.
2003-07-24 20:20:16 +00:00
Mark Murray
ebb9f0efa8
Don't check for the existance of src/crypto/ for building items that
...
may contain crypto. The days of ITAR paranoia are over, and the simple
macro tests that remain are sufficient.
2003-07-24 18:30:25 +00:00
Hajimu UMEMOTO
2cc2a59d85
name union.
2003-06-28 15:37:04 +00:00
Robert Watson
4d8cde2b41
Remove world read bit from the ppp binary; we don't do world-execute,
...
so it was inconsistent (although probably not harmful) to have
world-read.
Submitted by: Socketd <db@traceroute.dk>
2003-06-23 15:37:08 +00:00
Hajimu UMEMOTO
392460d7c9
Though manpage says that 0.0.0.0 can be used as HISADDR for gw
...
in Framed-Route, it didn't work. Since ncprange_aton() treats
0.0.0.0 and :: as prefixlen=0, we need to care the case.
MFC after: 1 week
2003-06-21 10:14:52 +00:00
Hajimu UMEMOTO
0d3e393ec5
Mention the use of Framed-IPv6-Prefix.
...
MFC after: 1 week
2003-06-20 18:14:57 +00:00
Hajimu UMEMOTO
ec3e98b8de
IPV6PREFIX is set when Framed-IPv6-Prefix is defined, You may
...
want to pass the value to upper layer protocol such as DHCPv6
for prefix delegation.
MFC after: 1 week
2003-06-20 16:15:59 +00:00
Hajimu UMEMOTO
d13b5b3cdf
Mention the use of Framed-IPv6-Route.
...
MFC after: 1 week
2003-06-20 15:44:52 +00:00
Hajimu UMEMOTO
cf7c10d0b4
Do RADIUS accounting on IPV6CP.
...
MFC after: 1 week
2003-06-19 18:55:49 +00:00
Hajimu UMEMOTO
8bfaa57b68
Oops, I put unused variable in my previous commit.
...
MFC after: 1 week
2003-06-19 18:28:37 +00:00
Hajimu UMEMOTO
0fe74aa4e3
Install routes specified by Framed-IPv6-Route. Since the format
...
of Framed-IPv6-Route is user defined, it follows Framed-IP-route.
MFC after: 1 week
2003-06-19 18:19:31 +00:00
Hajimu UMEMOTO
1f8db65a89
MYADDR6 in ppp.link{up,down} should match even when IPCP is enabled.
...
MFC after: 1 week
2003-06-16 15:19:25 +00:00
Kris Kennaway
5ba934c38d
Add missing header for system_Select() prototype
2003-06-12 07:48:45 +00:00
Peter Wemm
7dd6838582
Add a pretty cheesy hack to avoid a gcc-3.2.2 ICE (internal compiler
...
error) on amd64 when doing pointer subtraction. This bug is already
fixed in gcc-3.3 (waiting for after the branch), and the hack will be
backed out at the first opportunity. This is in the ipv6 code path.
Approved by: re (scottl)
2003-05-25 07:39:06 +00:00
Ruslan Ermilov
db1e3a4f98
Erase whitespace at EOL.
...
Approved by: re (blanket)
2003-05-22 11:56:41 +00:00
Ruslan Ermilov
f490cb986f
Previous revision broke release building, unbreak it.
...
Prodded by: scottl
2003-05-20 07:07:48 +00:00
Dag-Erling Smørgrav
7691f66abf
Retire the useless NOSECURE knob.
...
Approved by: re (scottl)
2003-05-19 15:52:01 +00:00
Hajimu UMEMOTO
b706c03da0
When session is over, IPv6 default route to tun should be
...
removed, too.
MFC after: 1 week
2003-04-05 10:10:33 +00:00
Hajimu UMEMOTO
977e6c08fe
Set link-local address of tun interface with prefixlen = 64
...
instead of 128. It makes RA happy.
Reported by: rafa@dif.um.es ,
SHIRASAKI Yasuhiro <yasuhiro@nttv6.jp>
Reviewed by: SHIRASAKI Yasuhiro <yasuhiro@nttv6.jp>
MFC after: 1 week
2003-04-04 11:09:08 +00:00
Hajimu UMEMOTO
bbdd270714
If IPCP is disabled, susccess of IPV6CP negotiation is sufficient
...
to communicate by IPv6. So, the prompt should be `PPP' rather
than `PPp'.
2003-03-28 18:23:43 +00:00
Hajimu UMEMOTO
34894c56bc
Don't install wrong IPv6 route by add command.
2003-03-26 06:30:11 +00:00
Brian Somers
92941b9076
Passing a u_char to ntohs() is guaranteed to give the wrong answer !
...
Submitted by: Francis Dupont <Francis.Dupont@enst-bretagne.fr>
2003-03-26 02:27:32 +00:00
Brian Somers
9603d5b40d
Add a ``force-scripts'' option for using chat scripts with -direct and
...
-dedicated links.
Submitted by: Maksim Yevmenkin <myevmenk@exodus.net>
2003-03-26 02:03:08 +00:00
Hajimu UMEMOTO
3efad8b488
Once ppp session is over, the route to ff02::tun0/32 was
...
deleted, and never came back. Now, the route to
ff02::tun0/32 is installed at the end of IPV6CP negitiaton.
2003-03-25 17:01:39 +00:00
Hajimu UMEMOTO
93193fc76c
We need filling scopeid to install routes for link-local
...
scope addresses.
2003-03-25 16:49:08 +00:00
Hajimu UMEMOTO
11f9e243a2
Since ppp.link{up,down} is invoked at the end of IPCP negotiation, if
...
we need ppp.link{up,down}, we couldn't disable IPCP. Now, if IPCP is
disabled, ppp.link{up,down} is invoked at the end of IPV6CP
negotiation.
2003-03-25 15:59:27 +00:00
Jens Schweikhardt
9d5abbddbf
Correct typos, mostly s/ a / an / where appropriate. Some whitespace cleanup,
...
especially in troff files.
2003-01-01 18:49:04 +00:00
Peter Wemm
6ceeb6902a
utmp.ut_time and lastlog.ll_time are explicitly int32_t rather than
...
time_t. Deal with the possibility that time_t != int32_t. This boils
down to this sort of thing:
- time(&ut.ut_time);
+ ut.ut_time = time(NULL);
and similar for ctime(3) etc. I've kept it minimal for the stuff
that may need to be portable (or 3rd party code), but used Matt's time32
stuff for cases where that isn't as much of a concern.
Approved by: re (jhb)
2002-11-15 22:42:00 +00:00
Brian Somers
3c34956a21
If the peer gives us 0.0.0.0 as his IP number, NAK it rather than accepting
...
it as being in range.
set ifaddr 1.2.3.4/0 5.6.7.8/0
no longer allows 0.0.0.0 as a valid IP.
Reported/tested by: Bohdan Horst <nexus@hoth.amu.edu.pl>
MFC after: 3 days
2002-09-23 22:40:43 +00:00
Brian Somers
31c759c0ef
Unbreak -DNOINET6
...
Submitted by: Andre Albsmeier <andre.albsmeier@mchp.siemens.de>
MFC after: 1 day
2002-09-02 13:34:27 +00:00
Maxim Sobolev
88202a1f33
Correctly handle ifr.ifr_flags/ifr.ifr_flagshigh like ifconfig(8) does.
...
MFC after: 1 day
2002-08-29 12:52:28 +00:00
Brian Somers
a3c48b40e9
- made ppp compliant to RFC 2472 (based on a patch from another
...
contributor)
- support ipv6cpretry and ipv6cpretries, which are IPv6 versions
of ipcpretry and ipcpretries.
- improve handling of IPv6 link-local addresses
Submitted by: JINMEI Tatuya <jinmei@isl.rdc.toshiba.co.jp>
2002-08-29 02:44:58 +00:00
Brian Somers
6eafd35305
Include the correct file (stdarg.h) and use va_list rather than _BSD_VA_LIST_
...
Suggested by: mike
2002-08-27 20:11:58 +00:00
Brian Somers
90f28f9c3b
Use _BSD_VA_LIST_ rather than __va_list if it's defined
2002-08-27 04:37:04 +00:00
Brian Somers
abc1373d37
Correct the FAQ url
...
Submitted by: Olivier Tharan <olive@oban.frmug.org>
2002-08-26 20:48:07 +00:00
Philippe Charnier
f0067240a1
Replace various spelling with FALLTHROUGH which is lint()able
2002-08-25 13:30:43 +00:00
Mike Barcroft
abbd890233
o Merge <machine/ansi.h> and <machine/types.h> into a new header
...
called <machine/_types.h>.
o <machine/ansi.h> will continue to live so it can define MD clock
macros, which are only MD because of gratuitous differences between
architectures.
o Change all headers to make use of this. This mainly involves
changing:
#ifdef _BSD_FOO_T_
typedef _BSD_FOO_T_ foo_t;
#undef _BSD_FOO_T_
#endif
to:
#ifndef _FOO_T_DECLARED
typedef __foo_t foo_t;
#define _FOO_T_DECLARED
#endif
Concept by: bde
Reviewed by: jake, obrien
2002-08-21 16:20:02 +00:00
Ruslan Ermilov
a654c53e16
mdoc(7) police: Removed redundant .Ns calls.
2002-08-13 16:07:28 +00:00
Marc Fonvieille
9a091256a9
Correct URL to the FAQ
...
MFC after: 1 week
2002-07-31 10:05:00 +00:00
Marc Fonvieille
1061be04b3
Correct links to Handbook's pages, old URLs does not work anymore.
...
MFC after: 1 week
2002-07-30 21:04:26 +00:00
Brian Somers
541e4966fc
Do a case insensitive comparison when comparing the ms-chap response
...
string.
2002-07-30 08:09:26 +00:00
Brian Somers
f4359ccbbc
Remove unused calls to inet_addr()
2002-07-18 18:50:05 +00:00
Brian Somers
4dc4e1ee89
Back out the previous revision
...
Objected to by: Andre Oppermann <oppermann@pipeline.ch>
After Andre's objection, I've re-examined rfc 2759 and noted that it
says that the domain name shouldn't be used when generating the
NT-Response field. So it looks like the bug is in freeradius rather
than in ppp.
2002-07-04 23:33:35 +00:00
Brian Somers
27dc75f10c
If we've given a domain name prefix as the authentication name, strip
...
it off before passing it on to the RADIUS server for authentication.
2002-07-03 20:51:13 +00:00