identifier reserved for the implementation in C99 and earlier so there is
no sensible reason for introducing yet another reserved identifier when we
could just use the one C1x uses.
Approved by: brooks (mentor)
__noreturn macro and modify the other exiting functions to use it.
The __noreturn macro, unlike __dead2, must be used BEFORE the function.
This is in line with the C and C++ specifications that place _Noreturn (c1x)
and [[noreturn]] (C++11) in front of the functions. As with __dead2, this
macro falls back to using the GCC attribute.
Unfortunately, clang currently sets the same value for the C version macro
in C99 and C1x modes, so these functions are hidden by default. At some
point before 10.0, I need to go through the headers and clean up the C1x /
C++11 visibility.
Reviewed by: brooks (mentor)
load of _l suffixed versions of various standard library functions that use
the global locale, making them take an explicit locale parameter. Also
adds support for per-thread locales. This work was funded by the FreeBSD
Foundation.
Please test any code you have that uses the C standard locale functions!
Reviewed by: das (gdtoa changes)
Approved by: dim (mentor)
implement a deprecated FPU control interface in addition to the
standard one. To make this clearer, further deprecate ieeefp.h
by not declaring the function prototypes except on architectures
that implement them already.
Currently i386 and amd64 implement the ieeefp.h interface for
compatibility, and for fp[gs]etprec(), which doesn't exist on
most other hardware. Powerpc, sparc64, and ia64 partially implement
it and probably shouldn't, and other architectures don't implement it
at all.
{readline,history}.h are in /usr/include/edit so as to not conflict with
the GNU libreadline versions. To use the libedit readline(3) one should
add "-I/usr/include/edit" to their Makefile
(spelled "-I${DESTDIR}/${INCLUDEDIR}/edit" within the FreeBSD source tree).
* Enable its use in the BSD licensed utilities that support readline(3).
* To make it easier to sync libedit development with NetBSD, histedit.h
is moved into libedit's directory as history shows shown we keep merging
it into that location.
Obtained from: NetBSD
Sponsored by: Juniper Networks
Add new RAID GEOM class, that is going to replace ataraid(4) in supporting
various BIOS-based software RAIDs. Unlike ataraid(4) this implementation
does not depend on legacy ata(4) subsystem and can be used with any disk
drivers, including new CAM-based ones (ahci(4), siis(4), mvs(4), ata(4)
with `options ATA_CAM`). To make code more readable and extensible, this
implementation follows modular design, including core part and two sets
of modules, implementing support for different metadata formats and RAID
levels.
Support for such popular metadata formats is now implemented:
Intel, JMicron, NVIDIA, Promise (also used by AMD/ATI) and SiliconImage.
Such RAID levels are now supported:
RAID0, RAID1, RAID1E, RAID10, SINGLE, CONCAT.
For any all of these RAID levels and metadata formats this class supports
full cycle of volume operations: reading, writing, creation, deletion,
disk removal and insertion, rebuilding, dirty shutdown detection
and resynchronization, bad sector recovery, faulty disks tracking,
hot-spare disks. For Intel and Promise formats there is support multiple
volumes per disk set.
Look graid(8) manual page for additional details.
Co-authored by: imp
Sponsored by: Cisco Systems, Inc. and iXsystems, Inc.
it possible for the kernel to track login class the process is assigned to,
which is required for RCTL. This change also make setusercontext(3) call
setloginclass(2) and makes it possible to retrieve current login class using
id(1).
Reviewed by: kib (as part of a larger patch)
* Some values changed in POSIX.1-2001; provide the former value if a program
requests compliance to an earlier version of POSIX. [1]
* Add missing _POSIX_CLOCKRES_MIN constant. This is a maximum value but
otherwise works the same as the minimum values.
PR: standards/104743
Submitted by: bde [1] (not exact #ifdefs, but the values)
MFC after: 2 weeks
setting. It can be built by setting the WITH_ICONV knob. While this
knob is unset, the library part, the binaries, the header file and
the metadata files will not be built or installed so it makes no impact
on the system if left turned off.
This work is based on the iconv implementation in NetBSD but a great
number of improvements and feature additions have been included:
- Some utilities have been added. There is a conversion table generator,
which can compare conversion tables to reference data generated by
GNU libiconv. This helps ensuring conversion compatibility.
- UTF-16 surrogate support and some endianness issues have been fixed.
- The rather chaotic Makefiles to build metadata have been refactored
and cleaned up, now it is easy to read and it is also easier to add
support for new encodings.
- A bunch of new encodings and encoding aliases have been added.
- Support for 1->2, 1->3 and 1->4 mappings, which is needed for
transliterating with flying accents as GNU does, like "u.
- Lots of warnings have been fixed, the major part of the code is
now WARNS=6 clean.
- New section 1 and section 5 manual pages have been added.
- Some GNU-specific calls have been implemented:
iconvlist(), iconvctl(), iconv_canonicalize(), iconv_open_into()
- Support for GNU's //IGNORE suffix has been added.
- The "-" argument for stdin is now recognized in iconv(1) as per POSIX.
- The Big5 conversion module has been fixed.
- The iconv.h header files is supposed to be compatible with the
GNU version, i.e. sources should build with base iconv.h and
GNU libiconv. It also includes a macro magic to deal with the
char ** and const char ** incompatibility.
- GNU compatibility: "" or "char" means the current local
encoding in use
- Various cleanups and style(9) fixes.
Approved by: delphij (mentor)
Obtained from: The NetBSD Project
Sponsored by: Google Summer of Code 2009
calling thread's unique integral ID, which is similar to AIX function of
the same name. Bump __FreeBSD_version to note its introduction.
Reviewed by: kib
__assert() is called when an assertion fails. After printing an error
message, it will call abort(). abort() never returns, hence it has the
__dead2 attribute. Also add this attribute to __assert().
MFC after: 3 weeks
- Provide function prototype for nlm_syscall
- Don't assign a variable from the stack to a global var[1]
- Remove unused vars
Found by: clang static analyser [1]
Reviewed by: dfr
I've noticed various terminal emulators that need to obtain a sane
default termios structure use very complex `hacks'. Even though POSIX
doesn't provide any functionality for this, extend our termios API with
cfmakesane(3), which is similar to the commonly supported cfmakeraw(3),
except that it fills the termios structure with sane defaults.
Change all code in our base system to use this function, instead of
depending on <sys/ttydefaults.h> to provide TTYDEF_*.
to amd64, i386, and pc98. The headers are installed to /usr/include/x86
during an installworld, and an 'x86' symlink is created for kernel builds
similar to 'machine' so that the headers can be included as <x86/foo.h>.
Reviewed by: imp
functions set or get pthread_rwlock type, current supported types are:
PTHREAD_RWLOCK_PREFER_READER_NP,
PTHREAD_RWLOCK_PREFER_WRITER_NONRECURSIVE_NP,
PTHREAD_RWLOCK_PREFER_WRITER_NP,
default is PTHREAD_RWLOCK_PREFER_WRITER_NONCECURSIVE_NP, this maintains
binary compatible with old code.
same null value, the code can not distinguish between them, to
fix the problem, now a destroyed object is assigned to a non-null
value, and it will be rejected by some pthread functions.
PTHREAD_ADAPTIVE_MUTEX_INITIALIZER_NP is changed to number 1, so that
adaptive mutex can be statically initialized correctly.
All the "Minimum Values" (POSIX.1-2008 XBD 13 Headers <limits.h>) are now
correct. These should all be exactly as they are in the specification; the
possibly higher values we support are announced differently.
PR: standards/104743
Submitted by: gcooper
MFC after: 2 weeks
The completer recognizes characters escaped with backslashes as being
literal parts of a word, and adds backslashes to avoid almost all
misinterpretation. In particular, filenames containing spaces can be
completed correctly.
For bug compatibility with the NetBSD version, the improved completion
function has a new name, _el_fn_sh_complete, and _el_fn_complete is
unchanged.
Submitted by: Guy Yur
This will be used to provide filename completion in sh(1).
Changes from the NetBSD code:
* wide character support disabled, as in the rest of libedit
* config.h and related portability stuff reduced/disabled, as in the rest
of libedit
Submitted by: Guy Yur
Obtained from: NetBSD
SUSv4 requires that implementation returns EINVAL if supplied path is NULL,
and ENOENT if path is empty string [1].
Bring prototype in conformance with SUSv4, adding restrict keywords.
Allow the resolved path buffer pointer be NULL, in which case realpath(3)
allocates storage with malloc().
PR: kern/121897 [1]
MFC after: 2 weeks
wcstoimax and wcstoumax, rather than spelling it __wchar_t. This is necessary
to use these functions in C++ where wchar_t is different to __wchar_t and is
a built-in type.
It may be better to use __wchar_t here and to simply define __wchar_t as being
wchar_t in C++ mode rather than to bring in wchar_t, but this is less invasive
and follows our existing practice, and restores wchar_t usage in this file to
what it was before r1.8.
Erwin ran an exp-run with libcompat and <regexp.h> removed. It turns out
the regexp library is almost entirely unused. In fact, it looks like it
is sometimes used by accident. Because these function names clash with
libc's <regex.h>, some application use both <regex.h> and libcompat,
which means they link against the wrong regex library.
This commit removes the regexp library and reimplements re_comp() and
re_exec() using <regex.h>. It seems the grammar of the regular
expressions accepted by these functions is similar to POSIX EREs.
After this commit, 1 low-profile port will be broken, but the maintainer
already has a patch for it sitting in his mailbox.
These header files only provide functionality that can be used in
combination with libcompat. In order to prevent people from including
them without any actual use (which happens a lot with <sys/timeb.h>),
put a warning here to make people more aware.
This means we have to lower WARNS for libcompat, which is no big deal.
Note that due to e.g. write throttling ('wdrain'), it can stall all the disk
I/O instead of just the device it's configured for. Using it for removable
media is therefore not a good idea.
Reviewed by: pjd (earlier version)
The ttyslot() function was originally part for SUSv1, marked LEGACY in
SUSv2 and removed later on. This function only makes sense when using
utmp(5), because it was used to determine the offset of the record for
the controlling TTY. It makes little sense to keep it here, because the
new utmpx file format doesn't index based on TTY slots.
The utmpx interface is the standardized interface of the user accounting
database. The standard only defines a subset of the functions that were
present in System V-like systems.
I'd like to highlight some of the traits my implementation has:
- The standard allows the on-disk format to be different than the
in-memory representation (struct utmpx). Most operating systems don't
do this, but we do. This allows us to keep our ABI more stable, while
giving us the opportunity to modify the on-disk format. It also allows
us to use a common file format across different architectures (i.e.
byte ordering).
- Our implementation of pututxline() also updates wtmp and lastlog (now
called utx.log and utx.lastlogin). This means the databases are more
likely to be in sync.
- Care must be taken that our implementation discard any fields that are
not applicable. For example, our DEAD_PROCESS records do not hold a
TTY name. Just a time stamp, a record identifier and a process
identifier. It also guarantees that strings (ut_host, ut_line and
ut_user) are null terminated. ut_id is obviously not null terminated,
because it's not a string.
- The API and its behaviour should be conformant to POSIX, but there may
be things that slightly deviate from the standard. This implementation
uses separate file descriptors when writing to the log files. It also
doesn't use getutxid() to search for a field to overwrite. It uses an
allocation strategy similar to getutxid(), but prevents DEAD_PROCESS
records from accumulating.
Make sure libulog doesn't overwrite the manpages shipped with our C
library. Also keep the symbol list in Symbol.map sorted.
I'll bump __FreeBSD_version later this evening. I first want to convert
everything to <utmpx.h> and get rid of <utmp.h>.
now type sema_t is a structure which can be put in a shared memory area,
and multiple processes can operate it concurrently.
User can either use mmap(MAP_SHARED) + sem_init(pshared=1) or use sem_open()
to initialize a shared semaphore.
Named semaphore uses file system and is located in /tmp directory, and its
file name is prefixed with 'SEMD', so now it is chroot or jail friendly.
In simplist cases, both for named and un-named semaphore, userland code
does not have to enter kernel to reduce/increase semaphore's count.
The semaphore is designed to be crash-safe, it means even if an application
is crashed in the middle of operating semaphore, the semaphore state is
still safely recovered by later use, there is no waiter counter maintained
by userland code.
The main semaphore code is in libc and libthr only has some necessary stubs,
this makes it possible that a non-threaded application can use semaphore
without linking to thread library.
Old semaphore implementation is kept libc to maintain binary compatibility.
The kernel ksem API is no longer used in the new implemenation.
Discussed on: threads@
Std 1003.1-2008. Both Linux and Solaris conforms to the new definitions,
so we better follow too (older glibc used old BSDish alphasort prototype
and corresponding type of the comparision function for scandir). While
there, change the definitions of the functions to ANSI C and fix several
style issues nearby.
Remove requirement for "sys/types.h" include for functions from manpage.
POSIX also requires that alphasort(3) sorts as if strcoll(3) was used,
but leave the strcmp(3) call in the function for now.
Adapt in-tree callers of scandir(3) to new declaration. The fact that
select_sections() from catman(1) could modify supplied struct dirent is
a bug.
PR: standards/142255
MFC after: 2 weeks
The <sys/termios.h> header file is hardlinked to <termios.h>. It
contains both the structures and the flag definitions, but also the C
library interface that's implemented by the C library.
This header file has the typical problem of including too many random
things and being badly ordered. Instead of trying to fix this, decompose
it into two header files:
- <sys/_termios.h>, which contains struct termios and the flags.
- <termios.h>, which includes <sys/_termios.h> and contains the C
library interface.
This means userspace has to include <termios.h> for struct termios,
while kernelspace code has to include <sys/tty.h>. Also add a
<sys/termios.h>, which prints a warning message before including
<termios.h>. I am aware that there are some applications that use this
header file as well.
from SUSv4 XSI. Note that the functions are obsoleted, and only
provided to ease porting from System V-like systems. Since sigpause
already exists in compat with different interface, XSI sigpause is
named xsi_sigpause.
Reviewed by: davidxu
MFC after: 3 weeks
controllers. Controller, array, and drive status can be checked, basic
attributes can be changed, and arrays and spares can be created and deleted.
Controller firmware can also be flashed.
This does not replace MegaCLI, found in ports, as that is officially sanctioned
and supported by LSI and includes vastly more functionality. However, mfiutil
is open source and guaranteed to provide basic functionality, which can be
especially useful if you have a problem and can't get MegaCLI to work.
Approved by: re
Obtained from: Yahoo! Inc.
modularize it so that new transports can be created.
Add a transport for SATA
Add a periph+protocol layer for ATA
Add a driver for AHCI-compliant hardware.
Add a maxio field to CAM so that drivers can advertise their max
I/O capability. Modify various drivers so that they are insulated
from the value of MAXPHYS.
The new ATA/SATA code supports AHCI-compliant hardware, and will override
the classic ATA driver if it is loaded as a module at boot time or compiled
into the kernel. The stack now support NCQ (tagged queueing) for increased
performance on modern SATA drives. It also supports port multipliers.
ATA drives are accessed via 'ada' device nodes. ATAPI drives are
accessed via 'cd' device nodes. They can all be enumerated and manipulated
via camcontrol, just like SCSI drives. SCSI commands are not translated to
their ATA equivalents; ATA native commands are used throughout the entire
stack, including camcontrol. See the camcontrol manpage for further
details. Testing this code may require that you update your fstab, and
possibly modify your BIOS to enable AHCI functionality, if available.
This code is very experimental at the moment. The userland ABI/API has
changed, so applications will need to be recompiled. It may change
further in the near future. The 'ada' device name may also change as
more infrastructure is completed in this project. The goal is to
eventually put all CAM busses and devices until newbus, allowing for
interesting topology and management options.
Few functional changes will be seen with existing SCSI/SAS/FC drivers,
though the userland ABI has still changed. In the future, transports
specific modules for SAS and FC may appear in order to better support
the topologies and capabilities of these technologies.
The modularization of CAM and the addition of the ATA/SATA modules is
meant to break CAM out of the mold of being specific to SCSI, letting it
grow to be a framework for arbitrary transports and protocols. It also
allows drivers to be written to support discrete hardware without
jeopardizing the stability of non-related hardware. While only an AHCI
driver is provided now, a Silicon Image driver is also in the works.
Drivers for ICH1-4, ICH5-6, PIIX, classic IDE, and any other hardware
is possible and encouraged. Help with new transports is also encouraged.
Submitted by: scottl, mav
Approved by: re
if the new file mode is the same as it was before; however, this
optimization must be disabled for filesystems that support NFSv4 ACLs.
Chmod uses pathconf(2) to determine whether this is the case - however,
pathconf(2) always follows symbolic links, while the 'chmod -h' doesn't.
This change adds lpathconf(3) to make it possible to solve that problem
in a clean way.
Reviewed by: rwatson (earlier version)
Approved by: re (kib)
dace for UPDv4 sockets bound to INADDR_ANY. Move the code to set
IP_RECVDSTADDR/IP_SENDSRCADDR into svc_dg.c, so that both TLI and non-TLI
users will be using it.
Back out my previous commit to mountd. Turns out the problem was affecting
more than one binary so it needs to me addressed in generic rpc code in
libc in order to fix them all.
Reported by: lstewart
Tested by: lstewart
any open file descriptors >= 'lowfd'. It is largely identical to the same
function on other operating systems such as Solaris, DFly, NetBSD, and
OpenBSD. One difference from other *BSD is that this closefrom() does not
fail with any errors. In practice, while the manpages for NetBSD and
OpenBSD claim that they return EINTR, they ignore internal errors from
close() and never return EINTR. DFly does return EINTR, but for the common
use case (closing fd's prior to execve()), the caller really wants all
fd's closed and returning EINTR just forces callers to call closefrom() in
a loop until it stops failing.
Note that this implementation of closefrom(2) does not make any effort to
resolve userland races with open(2) in other threads. As such, it is not
multithread safe.
Submitted by: rwatson (initial version)
Reviewed by: rwatson
MFC after: 2 weeks
so that the .h files in src/sys/fs/nfs will be installed under
/usr/include/fs/nfs. This will allow the following utilities to
build, once additions and changes for the experimental nfs subsystem
are committed:
usr.sbin/mountd - Once modified to add support for the
experimental nfs subsystem.
ur.sbin/nfsstat - Once modified to add support for the
experimental nfs subsystem.
usr.sbin/nfscbd - The client side callback daemon for NFSv4.
usr.sbin/nfsuserd - The NFSv4 user/group name<->uid/gid mapping daemon.
usr.sbin/nfsdumpstate - The NFSv4 utility for dumping open/lock state.
usr.sbin/nfsrevoke - The sysadmin command for revoking NFSv4 state.
Approved by: kib (mentor)
I've discussed this with the Pth maintainer and no clear solution
has emerged on the ports side of things, so for now, hack around
the issue in signal.h.
This does not include the new hash routines since they will cause problems
when reading old hash files.
Since mpool(3) has been changed, provide a compatibility shim for older
binaries.
Obtained from: OpenBSD
pthread_sigmask() to signal.h. In principle, this shouldn't break anything,
since they're already in signal.h on other systems, and the FreeBSD
manpage says that both pthread.h and signal.h need to be included to
get these functions.
Add a hack to declare pthread_t in the P1003.1-2008 namespace
in signal.h.
in the POSIX namespace, and hiding eaccess() and setproctitle().
Also move mknodat() from unistd.h to sys/stat.h where it belongs.
The *at() syscalls are only in CURRENT, so this shouldn't cause
problems.
__XOPEN_SOURCE >= 700, since mktemp() was withdrawn
from the standard. However, __XSI_VISIBLE is set to
700 in the default BSD envrionment, where mktemp()
should still exist; hence, check for this.
dprintf() is a simple wrapper around another function, so we may as
well implement it. But also like getline(), we can't prototype it by
default right now because it would break too many ports.
*at, and fexecve to the POSIX.1-2008 namespace.
- Remove getwd, ualarm, usleep, and vfork from the XSI namespace.
- Remove mkdtemp from the POSIX.1-2008 namespace (should be in stdlib.h).
wcscasecmp(), and wcsncasecmp().
- Make some previously non-standard extensions visible
if POSIX_VISIBLE >= 200809.
- Use restrict qualifiers in stpcpy().
- Declare off_t and size_t in stdio.h.
- Bump __FreeBSD_version in case the new symbols (particularly
getline()) cause issues with ports.
Reviewed by: standards@
A more elegant way of obtaining a name of a character device by its file
descriptor on FreeBSD, is to use the FIODGNAME ioctl. Because a valid
file descriptor implies a file descriptor is visible in /dev, it will
always resolve a valid device name.
I'm adding a more friendly wrapper for this ioctl, called fdevname(). It
is a lot easier to use than devname() and also has better error
handling. When a device name cannot be resolved, it will just return
NULL instead of a generated device name that makes no sense.
Discussed with: kib
that the annotated function returns a pointer that doesn't alias any
extant pointer. This results in a 50%+ speedup in microbenchmarks such
as the following:
char *cp = malloc(1), *buf = malloc(BUF);
for (i = 0; i < BUF; i++) buf[i] = *cp;
In real programs, your mileage will vary. Note that gcc already
performs this optimization automatically for any function called
`malloc', `calloc', `strdup', or `strndup' unless -fno-builtins is
used.
It includes the following fix:
2426. [bug] libbind: inet_net_pton() can sometimes return the
wrong value if excessively large netmasks are
supplied. [RT #18512]
Reported by: Maksymilian Arciemowicz <cxib__at__securityreason.com>
This change was erronously ommitted from the r185690, and attempt
to simply add the prototype to string.h has revealed that several
contributed programs defined local prototypes for strndup(), controlled
by autoconfed config.h. So, manually change #undef HAVE_STRNDUP to
#define HAVE_STRNDUP 1. Next import of the corresponding program would
regenerate config.h, overriding the changes in this commit.
No objections from: kan
src/sys/dev/usb2/core/usbdevs
src/sys/dev/usb2/include/urio2_ioctl.h
src/sys/dev/usb2/storage/ustorage2_fs.h
These files are not used any more.
src/usr.sbin/Makefile
src/etc/mtree/BSD.include.dist
src/include/Makefile
src/lib/Makefile
src/share/man/man7/hier.7
src/share/mk/bsd.libnames.mk
src/etc/mtree/BSD.include.dist
Make "usbconfig" and "libusb20" a part of the default build.
src/sys/dev/usb/rio500_usb.h
src/sys/dev/usb2/storage/urio2.c
Use common include file.
src/sys/dev/usb2/bluetooth/ng_ubt2.c
Make USB bluetooth depend on "ng_hci" module.
src/sys/dev/usb2/controller/ehci2.c
src/sys/dev/usb2/controller/ehci2.h
Patches for Marvell EHCI.
src/sys/dev/usb2/core/usb2_busdma.c
Bugfix for 64-bit platforms. Need to unload the previously loaded DMA
map and some cleanup regarding some corner cases.
src/sys/dev/usb2/core/usb2_core.h
src/sys/dev/usb2/core/usb2_dev.c
src/sys/dev/usb2/core/usb2_dev.h
Bugfix for libusb filesystem interface.
New feature: Add support for filtering device data at the expense of the
userland process.
Add some more comments.
Some minor code styling.
Remove unused function, usb2_fifo_get_data_next().
Fix an issue about "fifo_index" being used instead of "ep_index".
src/sys/dev/usb2/core/usb2_device.c
src/sys/dev/usb2/core/usb2_generic.c
Bugfix for Linux USB compat layer. Do not free non-generic FIFOs when
doing an alternate setting.
Cleanup USB IOCTL and USB reference handling.
Fix a corner case where USB-FS was left initialised after
setting a new configuration or alternate setting.
src/sys/dev/usb2/core/usb2_hub.c
Improvement: Check all USB HUB ports by default at least one time.
src/sys/dev/usb2/core/usb2_request.c
Bugfix: Make sure destination ASCII string is properly zero terminated
in all cases.
Improvement: Skip invalid characters instead of replacing with a dot.
src/sys/dev/usb2/core/usb2_util.c
src/sys/dev/usb2/image/uscanner2.c
Spelling.
src/sys/dev/usb2/include/Makefile
Share "usbdevs" with the old USB stack.
src/sys/dev/usb2/include/usb2_devid.h
src/sys/dev/usb2/include/usb2_devtable.h
Regenerate files.
Alfred: Please fix the RCS tag at the top.
src/sys/dev/usb2/include/usb2_ioctl.h
Fix compilation of "kdump".
src/sys/dev/usb2/serial/ubsa2.c
src/sys/dev/usb2/serial/ugensa2.c
Remove device ID's which will end up in a new 3G driver.
src/sys/dev/usb2/sound/uaudio2.c
Correct a debug printout.
src/sys/dev/usb2/storage/umass2.c
Sync with old USB stack.
src/lib/libusb20/libusb20.3
Add more documentation.
src/lib/libusb20/libusb20.c
Various bugfixes and improvements.
src/usr.sbin/usbconfig/dump.c
src/usr.sbin/usbconfig/usbconfig.c
New commands for dumping strings and doing custom USB requests from
the command line.
Remove keyword requirements from generated files:
"head/sys/dev/usb2/include/usb2_devid.h"
"head/sys/dev/usb2/include/usb2_devtable.h"
UT_HOSTSIZE and UT_LINESIZE are too small right now. If we ever bump
UT_HOSTSIZE, we must not forget to increase UT_LINESIZE as well. If we
add a comment, we're pretty sure we increase both values at the same
time.
PR: bin/108743 (maybe others)
and server. This replaces the RPC implementation of the NFS client and
server with the newer RPC implementation originally developed
(actually ported from the userland sunrpc code) to support the NFS
Lock Manager. I have tested this code extensively and I believe it is
stable and that performance is at least equal to the legacy RPC
implementation.
The NFS code currently contains support for both the new RPC
implementation and the older legacy implementation inherited from the
original NFS codebase. The default is to use the new implementation -
add the NFS_LEGACYRPC option to fall back to the old code. When I
merge this support back to RELENG_7, I will probably change this so
that users have to 'opt in' to get the new code.
To use RPCSEC_GSS on either client or server, you must build a kernel
which includes the KGSSAPI option and the crypto device. On the
userland side, you must build at least a new libc, mountd, mount_nfs
and gssd. You must install new versions of /etc/rc.d/gssd and
/etc/rc.d/nfsd and add 'gssd_enable=YES' to /etc/rc.conf.
As long as gssd is running, you should be able to mount an NFS
filesystem from a server that requires RPCSEC_GSS authentication. The
mount itself can happen without any kerberos credentials but all
access to the filesystem will be denied unless the accessing user has
a valid ticket file in the standard place (/tmp/krb5cc_<uid>). There
is currently no support for situations where the ticket file is in a
different place, such as when the user logged in via SSH and has
delegated credentials from that login. This restriction is also
present in Solaris and Linux. In theory, we could improve this in
future, possibly using Brooks Davis' implementation of variant
symlinks.
Supporting RPCSEC_GSS on a server is nearly as simple. You must create
service creds for the server in the form 'nfs/<fqdn>@<REALM>' and
install them in /etc/krb5.keytab. The standard heimdal utility ktutil
makes this fairly easy. After the service creds have been created, you
can add a '-sec=krb5' option to /etc/exports and restart both mountd
and nfsd.
The only other difference an administrator should notice is that nfsd
doesn't fork to create service threads any more. In normal operation,
there will be two nfsd processes, one in userland waiting for TCP
connections and one in the kernel handling requests. The latter
process will create as many kthreads as required - these should be
visible via 'top -H'. The code has some support for varying the number
of service threads according to load but initially at least, nfsd uses
a fixed number of threads according to the value supplied to its '-n'
option.
Sponsored by: Isilon Systems
MFC after: 1 month
on long long arguments.
Reviewed by: bde (previous version, that included asm implementation
for all ffs and fls functions on i386 and amd64)
MFC after: 2 weeks
for quite some time now. While I'm not sure if it'll break IA64 again,
this way doesn't cause problems with my builds of XFree86/Xorg and the way
they #include <osreldate.h> via cpp in the imake system.
is based on an old implementation from the University of Michigan with lots of
changes and fixes by me and the addition of a Solaris-compatible API.
Sponsored by: Isilon Systems
Reviewed by: alfred
When I turned sgtty into a binary-only interface (last month), I added
this explicit #error to the header file, to make sure nobody forgot to
remove the header file after updating world.
I think it is now a good moment to remove this header file.
Approved by: philip (mentor)
Adding exevpe() has caused some ports to break. Even though execvpe() is
a useful routine, it does not conform to any standards.
This patch is a little bit different from the patch sent to the mailing
list. I forgot to remove execvpe from the Symbol.map (which does not
seem to miscompile libc, though).
Reviewed by: davidxu
Approved by: philip
When GCC is invoked with -std=c99, the following errors are displayed when
including <spawn.h>:
/usr/include/spawn.h:69: error: static or type qualifiers in abstract declarator
/usr/include/spawn.h:69: error: static or type qualifiers in abstract declarator
/usr/include/spawn.h:72: error: static or type qualifiers in abstract declarator
/usr/include/spawn.h:72: error: static or type qualifiers in abstract declarator
We'd better remove the __restrict keywords here. The same is also done
in <regex.h>.
Submitted by: Andrzej Tobola <ato iem pw edu pl>
Reviewed by: davidxu
Approved by: philip (mentor, implicit)
can be used as replacements for exec/fork in a lot of cases. This
change also added execvpe() which allows environment variable
PATH to be used for searching executable file, it is used for
implementing posix_spawnp().
PR: standards/122051
sgtty was the original interface to configure terminal attributes on my
UNIX-like operating systems. It has been deprecated by the POSIX termios
interface, which is implemented in almost any modern system.
An advantage of turning this into a binary compatibility interface, is
that we can now eventually remove the COMPAT_43TTY switch from kernel
configurations. This removes many ioctl()'s from the TTY layer.
While there, increase the __FreeBSD_version, which may be useful for the
people working on the Ports tree.
Reviewed by: kib
Approved by: philip (mentor)
parts relied on the now removed NET_NEEDS_GIANT.
Most of I4B has been disconnected from the build
since July 2007 in HEAD/RELENG_7.
This is what was removed:
- configuration in /etc/isdn
- examples
- man pages
- kernel configuration
- sys/i4b (drivers, layers, include files)
- user space tools
- i4b support from ppp
- further documentation
Discussed with: rwatson, re
NET_NEEDS_GIANT. netatm has been disconnected from the build for ten
months in HEAD/RELENG_7. Specifics:
- netatm include files
- netatm command line management tools
- libatm
- ATM parts in rescue and sysinstall
- sample configuration files and documents
- kernel support as a module or in NOTES
- netgraph wrapper nodes for netatm
- ctags data for netatm.
- netatm-specific device drivers.
MFC after: 3 weeks
Reviewed by: bz
Discussed with: bms, bz, harti
accessor functions for its benefit now thaat FILE is opaque.
I'm sure there's a better way. I leave that for people to work
on in a src tree that isn't broken.
Pointy hat: jhb
move the definition of the type backing FILE (struct __sFILE) into an
internal header.
- Remove macros to inline certain operations from stdio.h. Applications
will now always call the functions instead.
- Move the various foo_unlocked() functions from unlocked.c into foo.c.
This lets some of the inlining macros (e.g. __sfeof()) move into
foo.c.
- Update a few comments.
- struct __sFILE can now go back to using mbstate_t, pthread_t, and
pthread_mutex_t instead of knowing about their private, backing types.
MFC after: 1 month
Reviewed by: kan
__sFILE. This was supposed to be done in 6.0. Some notes:
- Where possible I restored the various lines to their pre-__sFILEX state.
- Retire INITEXTRA() and just initialize the wchar bits (orientation and
mbstate) explicitly instead. The various places that used INITEXTRA
didn't need the locking fields or _up initialized. (Some places needed
_up to exist and not be off the end of a NULL or garbage pointer, but
they didn't require it to be initialized to a specific value.)
- For now, stdio.h "knows" that pthread_t is a 'struct pthread *' to
avoid namespace pollution of including all the pthread types in stdio.h.
Once we remove all the inlines and make __sFILE private it can go back
to using pthread_t, etc.
- This does not remove any of the inlines currently and does not change
any of the public ABI of 'FILE'.
MFC after: 1 month
Reviewed by: peter
deals with the usual __opendir2() calls, and the rest part with an interface
translator to expose fdopendir(3) functionality. Manual page was obtained from
kib@'s work for *at(2) system calls.
locked. This is intended primarily to support the userland equivalent
of the various *_ASSERT_LOCKED() macros we have in the kernel.
MFC after: 2 weeks
fields in FTS and FTSENT structs being too narrow. In addition,
the narrow types creep from there into fts.c. As a result, fts(3)
consumers, e.g., find(1) or rm(1), can't handle file trees an ordinary
user can create, which can have security implications.
To fix the historic implementation of fts(3), OpenBSD and NetBSD
have already changed <fts.h> in somewhat incompatible ways, so we
are free to do so, too. This change is a superset of changes from
the other BSDs with a few more improvements. It doesn't touch
fts(3) functionality; it just extends integer types used by it to
match modern reality and the C standard.
Here are its points:
o For C object sizes, use size_t unless it's 100% certain that
the object will be really small. (Note that fts(3) can construct
pathnames _much_ longer than PATH_MAX for its consumers.)
o Avoid the short types because on modern platforms using them
results in larger and slower code. Change shorts to ints as
follows:
- For variables than count simple, limited things like states,
use plain vanilla `int' as it's the type of choice in C.
- For a limited number of bit flags use `unsigned' because signed
bit-wise operations are implementation-defined, i.e., unportable,
in C.
o For things that should be at least 64 bits wide, use long long
and not int64_t, as the latter is an optional type. See
FTSENT.fts_number aka FTS.fts_bignum. Extending fts_number `to
satisfy future needs' is pointless because there is fts_pointer,
which can be used to link to arbitrary data from an FTSENT.
However, there already are fts(3) consumers that require fts_number,
or fts_bignum, have at least 64 bits in it, so we must allow for them.
o For the tree depth, use `long'. This is a trade-off between making
this field too wide and allowing for 64-bit inode numbers and/or
chain-mounted filesystems. On the one hand, `long' is almost
enough for 32-bit filesystems on a 32-bit platform (our ino_t is
uint32_t now). On the other hand, platforms with a 64-bit (or
wider) `long' will be ready for 64-bit inode numbers, as well as
for several 32-bit filesystems mounted one under another. Note
that fts_level has to be signed because -1 is a magic value for it,
FTS_ROOTPARENTLEVEL.
o For the `nlinks' local var in fts_build(), use `long'. The logic
in fts_build() requires that `nlinks' be signed, but our nlink_t
currently is uint16_t. Therefore let's make the signed var wide
enough to be able to represent 2^16-1 in pure C99, and even 2^32-1
on a 64-bit platform. Perhaps the logic should be changed just
to use nlink_t, but it can be done later w/o breaking fts(3) ABI
any more because `nlinks' is just a local var.
This commit also inludes supporting stuff for the fts change:
o Preserve the old versions of fts(3) functions through libc symbol
versioning because the old versions appeared in all our former releases.
o Bump __FreeBSD_version just in case. There is a small chance that
some ill-written 3-rd party apps may fail to build or work correctly
if compiled after this change.
o Update the fts(3) manpage accordingly. In particular, remove
references to fts_bignum, which was a FreeBSD-specific hack to work
around the too narrow types of FTSENT members. Now fts_number is
at least 64 bits wide (long long) and fts_bignum is an undocumented
alias for fts_number kept around for compatibility reasons. According
to Google Code Search, the only big consumers of fts_bignum are in
our own source tree, so they can be fixed easily to use fts_number.
o Mention the change in src/UPDATING.
PR: bin/104458
Approved by: re (quite a while ago)
Discussed with: deischen (the symbol versioning part)
Reviewed by: -arch (mostly silence); das (generally OK, but we didn't
agree on some types used; assuming that no objections on
-arch let me to stick to my opinion)
loop count.
2. Add function pthread_mutex_setyieldloops_np to turn a mutex's yield
loop count.
3. Make environment variables PTHREAD_SPINLOOPS and PTHREAD_YIELDLOOPS
to be only used for turnning PTHREAD_MUTEX_ADAPTIVE_NP mutex.
when particular function can't be found in nsswitch-module. For
example, getgrouplist(3) will use module-supplied 'getgroupmembership'
function (which can work in an optimal way for such source as LDAP) and
will fall back to the stanard iterate-through-all-groups implementation
otherwise.
PR: ports/114655
Submitted by: Michael Hanselmann <freebsd AT hansmi DOT ch>
Reviewed by: brooks (mentor)
is also implemented in glibc and is used by a number of existing
applications (mysql, firefox, etc).
This mutex type is a default mutex with the additional property that
it spins briefly when attempting to acquire a contested lock, doing
trylock operations in userland before entering the kernel to block if
eventually unsuccessful.
The expectation is that applications requesting this mutex type know
that the mutex is likely to be only held for very brief periods, so it
is faster to spin in userland and probably succeed in acquiring the
mutex, than to enter the kernel and sleep, only to be woken up almost
immediately. This can help significantly in certain cases when
pthread mutexes are heavily contended and held for brief durations
(such as mysql).
Spin up to 200 times before entering the kernel, which represents only
a few us on modern CPUs. No performance degradation was observed with
this value and it is sufficient to avoid a large performance drop in
mysql performance in the heavily contended pthread mutex case.
The libkse implementation is a NOP.
Reviewed by: jeff
MFC after: 3 days
for wide characters locales in the argument range >= 0x80 - they may
return false positives.
Example 1: for UTF-8 locale we currently have:
iswspace(0xA0)==1 and isspace(0xA0)==1
(because iswspace() and isspace() are the same code)
but must have
iswspace(0xA0)==1 and isspace(0xA0)==0
(because there is no such character and all others in the range
0x80..0xff for the UTF-8 locale, it keeps ASCII only in the single byte
range because our internal wchar_t representation for UTF-8 is UCS-4).
Example 2: for all wide character locales isalpha(arg) when arg > 0xFF may
return false positives (must be 0).
(because iswalpha() and isalpha() are the same code)
This change address this issue separating single byte and wide ctype
and also fix iswascii() (currently iswascii() is broken for
arguments > 0xFF).
This change is 100% binary compatible with old binaries.
Reviewied by: i18n@
providers with limited physical storage and add physical storage as
needed.
Submitted by: Ivan Voras
Sponsored by: Google Summer of Code 2006
Approved by: re (kensmith)
NET_NEEDS_GIANT, which will shortly be removed. This is done in a
away that it may be easily reattached to the build before 7.1 if
appropriate locking is added. Specifics:
- Don't install netatm include files
- Disconnect netatm command line management tools
- Don't build libatm
- Don't include ATM parts in rescue or sysinstall
- Don't install sample configuration files and documents
- Don't build kernel support as a module or in NOTES
- Don't build netgraph wrapper nodes for netatm
This removes the last remaining consumer of NET_NEEDS_GIANT.
Reviewed by: harti
Discussed with: bz, bms
Approved by: re (kensmith)
sys/i4b/include/ so they will be available to all architectures
once I4B compiles on those.
I4B header files are now installed in include/i4b/ and no longer
in include/machine/.
For now we still install the headers for i386 only.
Approved by: re (kensmith)
setenv(3) by tracking the size of the memory allocated instead of using
strlen() on the current value.
Convert all calls to POSIX from historic BSD API:
- unsetenv returns an int.
- putenv takes a char * instead of const char *.
- putenv no longer makes a copy of the input string.
- errno is set appropriately for POSIX. Exceptions involve bad environ
variable and internal initialization code. These both set errno to
EFAULT.
Several patches to base utilities to handle the POSIX changes from
Andrey Chernov's previous commit. A few I re-wrote to use setenv()
instead of putenv().
New regression module for tools/regression/environ to test these
functions. It also can be used to test the performance.
Bump __FreeBSD_version to 700050 due to API change.
PR: kern/99826
Approved by: wes
Approved by: re (kensmith)