Xin LI
415e46824c
Add a manpage for the CORE scheduler.
2006-06-14 02:16:51 +00:00
Christian Brueffer
7458d45fd3
s/MYRI10GE/MXGE/ and a typo fixed.
2006-06-13 14:23:13 +00:00
Andrew Gallatin
6d87a65da4
- Complete the myri10ge -> mxge name change by doing a mechanical
...
s/myri10ge/mxge/g replacement in the myri10ge files. A few contuation
lines were joined because of the regained columns.
- Hook the mxge driver back to the build.
2006-06-13 13:53:52 +00:00
Maxim Konovalov
a81d6f2126
o vinum.8 -> gvinum.8 as the former was replaced by the latter.
...
PR: docs/98340
MFC after: 1 week
2006-06-11 19:41:07 +00:00
Christian Brueffer
11cff99d3e
Be explicit about which chips support jumbo frames.
...
Suggested by: Brad Smith
Obtained from: OpenBSD
MFC after: 3 days
2006-06-10 15:14:12 +00:00
Nate Lawson
b46f4324ff
Move the reset beep tunable/sysctl to debug.acpi.resume_beep. This makes
...
more sense than under hw.acpi. Also, document this in the man page.
2006-06-10 08:06:16 +00:00
Gleb Smirnoff
056c7edaf7
Add section describing how ARP load balancing works and its
...
limitations:
- Can't load balance behind router
- ARP balancing + pfsync probably won't work
PR: kern/93829
Wording by: scottl
2006-06-07 10:26:51 +00:00
Christian Brueffer
4bf452f14a
Some mdoc and wording improvements.
2006-06-05 20:29:31 +00:00
Maxim Konovalov
fbec079f0d
o Add missed comma.
2006-06-05 19:55:44 +00:00
Matt Jacob
19ec23bb00
Just a very quick update to get *close* to reality.
2006-06-05 19:46:55 +00:00
Christian Brueffer
3640665627
my(4) provides support now as well.
2006-06-05 18:02:36 +00:00
Joel Dahl
1735925eeb
Fix minor typos.
2006-06-05 16:31:57 +00:00
Pawel Jakub Dawidek
4bc8da3589
- Document that padlock(4) pretends to accelerate HMAC algorithms.
...
- Remove "device cryptodev" as it is not needed for compiling padlock(4)
into the kernel. Actually it is not advisable, because padlock
instructions can be used directly from userland, so passing the work
through the kernel is a bad idea.
2006-06-05 16:24:31 +00:00
Robert Watson
673937ac08
Break out description of the audit pipe facility from audit.4 into a new
...
man page, auditpipe.4, which describes the behavior of audit pipes, the
ioctls, preselection, etc.
Obtained from: TrustedBSD Project
2006-06-05 15:26:09 +00:00
Kris Kennaway
f2baa2113b
Strengthen wording; the KTR_ENTRIES value *must* be a power of two since
...
the code depends on this.
MFC after: 1 week
2006-06-03 23:20:45 +00:00
Poul-Henning Kamp
4e1252688c
Remove mention of minor number construction.
2006-05-27 10:20:17 +00:00
Ceri Davies
8a3dce3376
Clarify that G_F_DISKIOCTL is unused, and remove G_T_DETAILS altogether,
...
since it isn't actually #defined.
Discussed with: phk
2006-05-25 13:39:27 +00:00
Ceri Davies
16e8814522
Clean up the grammar in here some.
2006-05-24 11:01:16 +00:00
Max Laier
e7e054f426
Remove stale altq instructions. They don't belong to the driver manpage
...
anyhow.
2006-05-20 21:12:06 +00:00
Max Laier
7a569b90b5
ALTQ-ify nve(4).
...
Submitted by: Chris Dionissopoulos
Tested by: Chris Dionissopoulos
MFC after: 4 weeks
2006-05-20 21:08:09 +00:00
Christian Brueffer
b350088186
Fix a formatting issue.
2006-05-20 10:19:53 +00:00
Christian Brueffer
2d431ba618
Convert to use a SYNPOSIS section that mentions kernel modules.
...
Also add "device scbus" where needed.
MFC after: 3 days
2006-05-20 09:39:28 +00:00
Christian Brueffer
674a743a01
Minimal manpage for the acpi_dock driver. This needs to be fleshed out
...
by someone in the know about this driver.
2006-05-20 06:21:42 +00:00
Christian S.J. Peron
c6e7a80348
Fix typo in device hint variable
2006-05-17 13:17:02 +00:00
Poul-Henning Kamp
f6ce2a64f7
Send the pcvt(4) driver off to retirement.
2006-05-17 09:33:15 +00:00
Wilko Bulte
49d6fadab6
Remove reference to the Alpha architecture.
2006-05-15 20:51:53 +00:00
Wilko Bulte
631af821b0
Remove reference to Alpha.
2006-05-15 20:48:18 +00:00
Wilko Bulte
29d4ebe97f
Remove reference to Alpha machine
2006-05-15 20:42:42 +00:00
Marius Strobl
55191e9444
Now that lnc(4) is removed from the source tree, replace lnc0 in an example
...
with fxp0 (fxp(4) was chosen as it's also used in a couple of examples in
other man pages and as it has good grep(1)'ability).
2006-05-15 20:28:18 +00:00
Marius Strobl
d204811f1e
Now that lnc(4) is removed from the source tree, remove it from the list
...
of drivers supporting ALTQ.
2006-05-15 20:16:42 +00:00
Wilko Bulte
e3f8465ff0
With the demise of Alpha, remove Alpha specific diagnostic.
2006-05-14 22:19:11 +00:00
Christian Brueffer
390a6b58b2
Add if_* MLINKS for bce(4) and le(4).
...
MFC after: 3 days
2006-05-14 15:45:44 +00:00
Bruce M Simpson
2413531434
Don't quote IP_MAX_MEMBERSHIPS as 20 any more.
2006-05-14 14:13:30 +00:00
George V. Neville-Neil
842c485bf8
Remove the documentation from the Makefile as well.
2006-05-14 02:01:59 +00:00
George V. Neville-Neil
d72e36b914
Remove documentation for the deprecated lnc driver.
...
Reviewed By: simon
2006-05-14 01:55:20 +00:00
Giorgos Keramidas
6ac5e06ca3
Fix the web-appearance of Hardware notes, in the simplest way
...
possible; by re-arranging a couple of sentences in the ath(4)
HARDWARE section.
Clue by: bmah
MFC after: 1 week
2006-05-12 17:58:11 +00:00
Giorgos Keramidas
ab7350b7de
After a mini-discussion with Sam Leffler, remove the hardcoded
...
list of Atheros-based cards from ath(4). The online list is
always more up to date, anyway.
This invalidates:
PR: docs/95360
Submitted by: Erik Nordstr:om Andersen <erik@erik-n-andersen.dk>
2006-05-12 12:55:56 +00:00
Giorgos Keramidas
29886d86de
The 'device fd' line became obsolete some years ago, when the transition
...
to device hints was committed. The GENERIC kernel configuration lost
its 'device fd' line at revision 1.260, committed by peter@ on
2000/06/13 22:28:46 UTC.
Delete the reference to 'device fd', to avoid kernel build breakage like
the one described in the PR audit trail.
PR: docs/91448
Submitted by: Eugene Grosbein <eugen@grosbein.pp.ru>
MFC after: 1 week
2006-05-11 17:23:03 +00:00
Christian Brueffer
e862bc666e
Correct the interrupt override information.
...
PR: 93429
Submitted by: Michaël Grünewald <michael.grunewald@laposte.net>
MFC after: 3 days
2006-05-01 11:56:18 +00:00
Andrew Thompson
93b23a8b16
Correct sentence, forwarding non IP packets is now an option.
2006-04-29 01:19:08 +00:00
Giorgos Keramidas
9dc894b630
Minor improvements after last revision.
...
Reviewed by: thompsa
2006-04-28 22:37:16 +00:00
Maxim Konovalov
64e16bf0e1
o Borrow from if_bridge.4: note that the bridge interface need to be upped.
...
PR: docs/94545
Submitted by: thompsa
2006-04-28 21:45:08 +00:00
Christian Brueffer
8a2f9e6c0f
Minor wording and formatting fixes.
2006-04-28 13:12:40 +00:00
Andrew Thompson
25bcdd36e4
- use ath(4) in the wireless examples rather than the aging wi(4)
...
- make the packet filtering its own section and clarify a few points
- note that the interfaces need to be upped [1]
PR: docs/94545 [1]
2006-04-28 11:48:53 +00:00
Christian Brueffer
1f013205ec
Oops, forgot to remove the old entry in the last revision.
2006-04-28 06:23:42 +00:00
Christian Brueffer
dff1951e61
Install rr232x.4 only on i386 and amd64.
2006-04-28 06:13:19 +00:00
Scott Long
2de39eb9e2
Add a manpage for the rr232x driver.
2006-04-28 04:26:00 +00:00
Michael Reifenberger
88d524e515
document the new tunable.
2006-04-25 16:52:54 +00:00
Christian Brueffer
b981599f70
Mention VIA VT8251 support.
2006-04-25 15:07:10 +00:00
Marcel Moolenaar
95eb1796b1
Remove the sab(4) manpage.
2006-04-24 21:42:28 +00:00