Apply the following automated changes to try to eliminate
no-longer-needed sys/cdefs.h includes as well as now-empty
blank lines in a row.
Remove /^#if.*\n#endif.*\n#include\s+<sys/cdefs.h>.*\n/
Remove /\n+#include\s+<sys/cdefs.h>.*\n+#if.*\n#endif.*\n+/
Remove /\n+#if.*\n#endif.*\n+/
Remove /^#if.*\n#endif.*\n/
Remove /\n+#include\s+<sys/cdefs.h>\n#include\s+<sys/types.h>/
Remove /\n+#include\s+<sys/cdefs.h>\n#include\s+<sys/param.h>/
Remove /\n+#include\s+<sys/cdefs.h>\n#include\s+<sys/capsicum.h>/
Sponsored by: Netflix
The SPDX folks have obsoleted the BSD-2-Clause-FreeBSD identifier. Catch
up to that fact and revert to their recommended match of BSD-2-Clause.
Discussed with: pfg
MFC After: 3 days
Sponsored by: Netflix
And note that it is deprecated.
PR: 236569
Reported by: bcran
Reviewed by: imp
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D37678
For most users it's not needed to boot and they are also
available in the FreeBSD-rescue package in case an update
break and FreeBSD-geom package isn't updated correctly.
Differential Revision: https://reviews.freebsd.org/D36224
The reported problem is that some geli commands exit with a
success status when they should exit with a failed status.
The gctl_error() function is defined differently in the kernel
(in sys/geom/geom_ctl.c) versus in the geom user facilities (in
sbin/geom/misc/subr.c). In the kernel, calling gctl_error() causes
an error return to be set while in the user version it does not.
It was only by a quirk that had been added to the user geom return
processing that I "cleaned up" that the lack of the user implementaion
to set the error return showed up.
This patch adds the missing setting of the error code when calling
the user facility gctl_error().
Reported by: Jenkins
Debugging by: Alan Somers
Debugging by: Cy Schubert
Debugging by: Li-Wen Hsu
Historically, GEOM utilities (gpart(8), gstripe(8), gmirror(8),
etc) used the gctl_error() routine to report errors. If they called
gctl_error() they would exit with EXIT_FAILURE, otherwise they would
return with EXIT_SUCCESS. If they used gctl_error() to output an
informational message, for example when run with the -v (verbose)
option, they would mistakenly exit with EXIT_FAILURE. A further
limitation of the gctl_error() function was that it could only be
called once. Messages from any additional calls to gctl_error()
would be silently discarded.
To resolve these problems a new function, gctl_msg() has been added.
It can be called multiple times to output multiple messages. It
also has an additional errno argument which should be zero if it is
an informational message or an errno value (EINVAL, EBUSY, etc) if
it is an error. When done the gctl_post_messages() function should
be called to indicate that all messages have been posted. If any
of the messages had a non-zero errno, the utility will EXIT_FAILURE.
If only informational messages (with zero errno) were posted, the
utility will EXIT_SUCCESS.
Tested by: Peter Holm
PR: 265184
MFC after: 1 week
Traditionally the GEOM's primary channel of information from kernel to
user-space was confxml, fetched by libgeom through kern.geom.confxml
sysctl. It is convenient and informative, representing full state of
GEOM in a single XML document. But problems start to arise on systems
with hundreds of disks, where the full confxml size reaches many
megabytes, taking significant time to first write it and then parse.
This patch introduces alternative solution, allowing to fetch much
smaller XML document, subset of the full confxml, limited to 64KB and
representing only one specified geom and optionally its parents. It
uses existing GEOM control interface, extended with new "getxml" verb.
In case of any error, such as the buffer overflow, it just transparently
falls back to traditional full confxml. This patch uses the new API in
user-space GEOM tools where it is possible.
Reviewed by: imp
MFC after: 2 month
Sponsored by: iXsystems, Inc.
Differential Revision: https://reviews.freebsd.org/D34529
I see more user-friendly to do nothing if the module is already
loaded, rather than returning quite confusing error message.
As side effect it allows to avoid std_list_available() call, using
quite expensive on large systems geom_gettree().
MFC after: 1 month
Make gctl_add_param() API public, allowing more precise control over
parameter flags. Previously it was impossible to properly declare
write-only ASCII parameters, used for result reporting, they were
declared as read-write binary instead, that was not nice.
MFC after: 1 month
The gunion(8) utility is used to track changes to a read-only disk on
a writable disk. Logically, a writable disk is placed over a read-only
disk. Write requests are intercepted and stored on the writable
disk. Read requests are first checked to see if they have been
written on the top (writable disk) and if found are returned. If
they have not been written on the top disk, then they are read from
the lower disk.
The gunion(8) utility can be especially useful if you have a large
disk with a corrupted filesystem that you are unsure of how to
repair. You can use gunion(8) to place another disk over the corrupted
disk and then attempt to repair the filesystem. If the repair fails,
you can revert all the changes in the upper disk and be back to the
unchanged state of the lower disk thus allowing you to try another
approach to repairing it. If the repair is successful you can commit
all the writes recorded on the top disk to the lower disk.
Another use of the gunion(8) utility is to try out upgrades to your
system. Place the upper disk over the disk holding your filesystem
that is to be upgraded and then run the upgrade on it. If it works,
commit it; if it fails, revert the upgrade.
Further details can be found in the gunion(8) manual page.
Reviewed by: Chuck Silvers, kib (earlier version)
tested by: Peter Holm
Differential Revision: https://reviews.freebsd.org/D32697
Geom utilities (geli(8), glabel(8), gmirror(8), gpart(8), gmirror(8),
gmountver(8), etc) all use the geom(8) utility as their back end
to process their commands and pass them into the kernel. Creating
a new utility requires no more than filling out a template describing
the commands and arguments that the utility supports. Consider the
specification for the very simple gmountver(8) utility:
struct g_command class_commands[] = {
{ "create", G_FLAG_VERBOSE | G_FLAG_LOADKLD, NULL,
{
G_OPT_SENTINEL
},
"[-v] prov ..."
},
{ "destroy", G_FLAG_VERBOSE, NULL,
{
{ 'f', "force", NULL, G_TYPE_BOOL },
G_OPT_SENTINEL
},
"[-fv] name"
},
G_CMD_SENTINEL
};
It has just two commands of its own: "create" and "destroy" along
with the four standard commands "list", "status", "load", and
"unload" provided by the base geom(8) utility. The base geom(8)
utility allows each command to use the G_FLAG_VERBOSE flag to specify
that a command should accept the -v flag and when the -v flag is
given the utility prints "Done." if the command completes successfully.
In the above example, both of the commands set the G_FLAG_VERBOSE,
so have the -v option available. In addition the "destroy" command
accepts the -f boolean flag to force the destruction.
If the "destroy" command wanted to also print out verbose information,
it would need to explicitly declare its intent by adding a line:
{ 'v', "verbose", NULL, G_TYPE_BOOL },
Before this change, the geom utility would silently ignore the above
line in the configuration file, so it was impossible for the utility
to know that the -v flag had been set on the command. With this
change a geom command can explicitly specify a -v option with a
line as given above and handle it as it would any other option. If
both a -v option and G_FLAG_VERBOSE are specified for a command
then both types of verbose information will be output when that
command is run with -v.
MFC after: 1 week
Sponsored by: Netflix
Allow geom(8) to list geoms with the '/dev/' prefix.
`geom part show` accepts the '/dev/' prefix but `geom part list` does not.
Modify find_geom() in sbin/geom/core/geom.c to be consistent with the behavior
of find_geom() in lib/geom/part/geom_part.c.
PR: 188213
Reported by: Ronald F. Guilmette <rfg@tristatelogic.com>
Reviewed by: imp, kevans
Approved by: kevans (mentor)
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D27556
Update a bunch of Makefile.depend files as
a result of adding Makefile.depend.options files
Reviewed by: bdrewery
MFC after: 1 week
Sponsored by: Juniper Networks
Differential Revision: https://reviews.freebsd.org/D22494
Sample output:
% geom -t
Geom Class Provider
da0 DISK da0
da0 PART da0s1
da0s1 PART da0s1a
ffs.da0s1a VFS
da0s1a DEV
da0s1 DEV
da0 DEV
da1 DISK da1
swap SWAP
da1 DEV
cd0 DISK cd0
cd0 DEV
Reviewed by: oshogbo
Approved by: re (kib)
MFC after: 2 weeks
Relnotes: yes
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D17151
Rather then combining hardlink creation for the geom(8) binary with
shared library build, move libraries to src/lib/geom so they are
built and installed normally. Create a common Makefile.classes
which is included by both lib/geom/Makefile and sbin/geom/Makefile
so the symlink and libraries stay in sync.
The relocation of libraries allows libraries to be build for 32-bit
compat. This also reduces the number of non-standard builds in
the system.
This commit is not sufficent to run a 32-bit /sbin/geom on a 64-bit
system out of the box as it will look in the wrong place for libraries
unless GEOM_LIBRARY_PATH is set appropriatly in the environment.
Reviewed by: bdrewery
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D15360
Previously gpart's man page listed some command options in prose, and
some in table form, which made it more difficult to use as a reference.
Reviewed by: bcr
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D15135
Alphabetical order, uppercase before lowercase for each letter and with
no regard to whether an option takes an argument.
Sponsored by: The FreeBSD Foundation
If the 'n' flag is provided the provided key number will be used to
decrypt device. This can be used combined with dryrun to verify if the key
is set correctly. This can be also used to determine which key slot we want to
change on already attached device.
Reviewed by: allanjude
Differential Revision: https://reviews.freebsd.org/D15309
'n' is used in other commands to define the key index.
We should be consistent with that.
'C' option is used by patch(1) to perform dryrun so lets use that.
Reviewed by: allanjude
Differential Revision: https://reviews.freebsd.org/D15308
This will allow us to verify if passphrase and key is valid without
decrypting whole device.
Reviewed by: cem@, allanjude@
Differential Revision: https://reviews.freebsd.org/D15000
Most consumers of g_metadata_store were passing in partially unallocated
memory, resulting in stack garbage being written to disk labels. Fix them by
zeroing the memory first.
gvirstor repeated the same mistake, but in the kernel.
Also, glabel's label contained a fixed-size string that wasn't
initialized to zero.
PR: 222077
Reported by: Maxim Khitrov <max@mxcrypt.com>
Reviewed by: cem
MFC after: 3 weeks
X-MFC-With: 323314
X-MFC-With: 323338
Differential Revision: https://reviews.freebsd.org/D14164
Mainly focus on files that use BSD 2-Clause license, however the tool I
was using misidentified many licenses so this was mostly a manual - error
prone - task.
The Software Package Data Exchange (SPDX) group provides a specification
to make it easier for automated tools to detect and summarize well known
opensource licenses. We are gradually adopting the specification, noting
that the tags are considered only advisory and do not, in any way,
superceed or replace the license texts.
No functional change intended.
'last' is the sector number of the last usable sector. Sector
numbers start with 0. As such, 'last' is always 1 less than
the count of sectors and aligning 'last' down as-is means that
the number of free sectors is pessimized by 'alignment - 1' if
the number of usable sectors was already a multiple of the
alignment. Consequently, gpart(8) failed to create a partition
when the alignment and size were such that it would extend to
the end of the disk.
partitioning scheme.
Users often get confused and frustrated when trying to delete partition
table and getting ``Device busy'' error because they forgot (or did not
ever know that they have) to delete all its partitions first, and while
the manual page mentions this briefly, it does not stress it out enough.
Approved by: ae, manpages (bjk)
PR (as inspiration): 196102
Differential Revision: https://reviews.freebsd.org/D12336
Any geom class using g_metadata_store, as well as geom_virstor which
duplicated g_metadata_store internally, would dump sectorsize - mdsize bytes
of userspace memory following the metadata block stored. This is most or all
geom classes (gcache, gconcat, geli, gjournal, glabel, gmirror, gmultipath,
graid3, gshsec, gstripe, and geom_virstor).
PR: 222077 (comment #3)
Reported by: Maxim Khitrov <max AT mxcrypt.com>
Reviewed by: des
Security: yes
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D12269
