Even on Illumos, with its much larger KVA, ZFS ARC steps back if KVA usage
reaches certain threshold (3/4 on i386 or 16/17 otherwise). FreeBSD has
even less KVA, but had no such limit on archs with direct map as amd64.
As result, on machines with a lot of RAM, during load with very small user-
space memory pressure, such as `zfs send`, it was possible to reach state,
when there is enough both physical RAM and KVA (I've seen up to 25-30%),
but no continuous KVA range to allocate even single 128KB I/O request.
Address this situation from two sides:
- restore KVA usage limitations in a way the most close to Illumos;
- introduce new requirement for KVA fragmentation, specifying that we
should have at least one sequential KVA range of zfs_max_recordsize bytes.
Experiments show that first limitation done alone is not sufficient. On
machine with 64GB of RAM it is sometimes needed to drop up to half of ARC
size to get at leats one 1MB KVA chunk. Statically limiting ARC to half
of KVA/RAM is too strict, so second limitation makes it to work in cycles:
accumulate trash up to certain critical mass, do massive spring-cleaning,
and then start littering again. :)
MFC after: 1 month
This adds an upper bound, dtrace_ustackdepth_max, to the number of frames
traversed when computing the userland stack depth. Some programs - notably
firefox - are otherwise able to trigger an infinite loop in
dtrace_getustack_common(), causing a panic.
MFC after: 1 week
traps do appear in the regular call stack, rather than only in a special
trap frame, so we don't need to inject the trap-frame $pc into a returned
stack trace in DTrace.
MFC after: 3 days
Sponsored by: DARPA, AFRL
skip using the DTrace 'profile' provider on ARM. This causes stack traces
to skip various driver-and callout-related things as they do on x86, where
the likewise arbitrary values are '6' (32-bit) and '10' (64-bit) for
similar sorts of reasons.
MFC after: 3 days
Sponsored by: DARPA, AFRL
If zvol_geom_start is called with a BIO_DELETE from a thread which can
sleep it queues it for later processing by the zvol_geom_worker. The
zvol_geom_worker didn't have a delete case so would simply loose the bio
hence preventing the original caller from every completing. In addition
an other unknown types would suffer the same fate.
Allow zvol_geom_worker to process BIO_DELETE's via zvol_strategy and
return unsupported for all unknown bio types.
MFC after: 2 weeks
Sponsored by: Multiplay
emulate the instructions used in function entry and exit.
For function entry ARM will use a push instruction to push up to 16
registers to the stack. While we don't expect all 16 to be used we need to
handle any combination the compiler may generate, even if it doesn't make
sense (e.g. pushing the program counter).
On function return we will either have a pop or branch instruction. The
former is similar to the push instruction, but with care to make sure we
update the stack pointer and program counter correctly in the cases they
are either in the list of registers or not. For branch we need to take the
24-bit offset, sign-extend it, and add that number of 4-byte words to the
program counter. Care needs to be taken as, due to historical reasons, the
address the branch is relative to is not the current instruction, but 8
bytes later.
This allows us to use the following probes on ARM boards:
dtrace -n 'fbt::malloc:entry { stack() }'
and
dtrace -n 'fbt:🆓return { stack() }'
Differential Revision: https://reviews.freebsd.org/D2007
Reviewed by: gnn, rpaulo
Sponsored by: ABT Systems Ltd
expected to return the data in the memory location pointed at by target
after the operation. The FreeBSD atomic functions previously used return
either 0 or 1 to indicate if the comparison succeeded or not respectively.
With this change these functions only support ARMv6 and later are supported
by these functions.
Sponsored by: ABT Systems Ltd
dtrace is able to display a stack trace similar to the one below.
# dtrace -p 603 -n 'tcp:kernel::receive { stack(); }'
0 70 :receive
kernel`ip_input+0x140
kernel`netisr_dispatch_src+0xb8
kernel`ether_demux+0x1c4
kernel`ether_nh_input+0x3a8
kernel`netisr_dispatch_src+0xb8
kernel`ether_input+0x60
kernel`cpsw_intr_rx+0xac
kernel`intr_event_execute_handlers+0x128
kernel`ithread_loop+0xb4
kernel`fork_exit+0x84
kernel`swi_exit
kernel`swi_exit
Tested by: gnn
Sponsored by: ABT Systems Ltd
cannot happen on FreeBSD. r278136 overlooked the fact that a destructor
registered with devfs_set_cdevpriv(9) is invoked even in the case of an
error.
X-MFC-With: r278136
This allows dtrace to monitor the calls to txg_quiesce which can be really
helpful.
Also standardise __noinline order for arc_kmem_reap_now.
Sponsored by: Multiplay
ZFS already commits outstanding data every zfs_txg_timeout seconds, so these
syncs are unnecessarily intrusive.
Submitted by: gibbs
Sponsored by: Spectra Logic
MFSpectraBSD: 1105759 on 2014/12/11
Since allow_mounted is a FreeBSD-specific change, default to B_TRUE, then
locally check for the magic bit. Unconditionally check allow_mounted below.
Convert the setting of allow_mounted to an explicit boolean.
MFC after: 1 week
Sponsored by: Spectra Logic
MFSpectraBSD: 672578 (in part) on 2013/07/19
This is primarily for developer/debugging use; it enables built-in tagged
tracking of refcounts inside ZFS. It can only be enabled from the loader,
since it modifies how in-core state is managed. Default remains disabled.
MFC after: 1 week
Sponsored by: Spectra Logic
Remove the unnecessary #ifdef _KERNEL, which did not differ in the true or
false cases. Actually set the value of to_free before using it.
MFC after: 1 week
Sponsored by: Spectra Logic
dsl_dir_transfer_space() is mostly called after dsl_dir_diduse_space(),
which already calls dmu_buf_will_dirty() for the same dbuf and tx, so
its duplicate call in those cases will change nothing, only spend time.
Skipping this call by four times reduces time spent in dbuf_write_done()
and descendants, updating dataset statistics with several congested lock
acquisitions. When rewriting 8K zvol blocks at 1GB/s rate, this reduces
CPU time spent inside dbuf_write_done(), according to profiling, from 45%
of 683K samples to 18% of 422K.
MFC after: 2 weeks
A number of entries that can be present in the spa config shouldn't be saved
to disk so add a method to ensure this is case. Without this if the last
caller to vdev_config_generate requested stats then we can end up in the
cache file.
Also only skip a none writable pool in the cache file generation if its
active. This prevents unavailable pools incorrectly getting removed from
cache file.
Tested by: delphij
MFC after: 2 weeks
Sponsored by: Multiplay
Since the upstream for cddl code is now illumos not sun, mechanically
convert all sun #ifdef's to illumos #ifdef's which have been used in all
newer code for some time.
Also do a manual pass to correct the use if #ifdef comments as per style(9)
as well as few uses of #if defined(__FreeBSD__) vs #ifndef illumos.
MFC after: 1 month
Sponsored by: Multiplay
Previous throttling implementation approached problem from the wrong side.
It significantly limited useful delaying of TRIM requests and aggregation
potential, while not so much controlled TRIM burstiness under heavy load.
With this change random 4K write benchmarks (probably the worst case for
TRIM) show me IOPS increase by 20%, average latency reduction by 30%, peak
TRIM bursts reduction by 3 times and same peak TRIM map size (memory usage).
Also the new logic does not force map size down so heavily, really allowing
to keep deleted data for 32 TXG or 30 seconds under moderate load. It was
practically impossible with old throttling logic, which pushed map down to
only 64 segments.
Reviewed by: smh
MFC after: 2 weeks
Sponsored by: iXsystems, Inc.
New segment at the list head may block all TRIM requests until txg of that
segment can be processed. On my random I/O tests this change reduce peak
TRIM list length from 650 to 450 segments. Hopefully it should reduce TRIM
burstiness when list processing is unblocked.
MFC after: 2 weeks
On FreeBSD gethrtime() implemented via getnanouptime(), that has 1ms (1/hz)
precision. It makes primary sort key (timestamp) collision very possible.
In such situations sorting by secondary key of LBA is much more reasonable
then by totally meaningless zio pointer value.
With this change on multi-threaded synchronous ZVOL read I've measured 10%
throughput increase and average latency reduction.
MFC after: 2 weeks
When pools are unavailable their vdevs are also unavailable which means
that vdev_max_asize remains at the default zero. This default was being
used to calculate vs_esize resulting in a negative number as vdev_asize >
vdev_max_asize, which caused zpool list -v to display 16.0E for EXPANDSZ
of these vdevs.
It's redundant at the moment since it can be obtained from the trapframe
on the architectures where DTrace is supported, but this won't be the case
with ARM.
Resizing a ZFS ZVOL with debug enabled would result in a panic due to
recursion on dp_config_rwlock.
The upstream change "3464 zfs synctask code needs restructuring" changed
zvol_set_volsize to avoid the recursion on dp_config_rwlock, but this was
missed when originally merged in by r248571 due to significant differences
in our codebases in this area.
These changes also relied on bring in changes from upstream:
3557 dumpvp_size is not updated correctly when a dump zvol's size is
changed, which where also not present.
In order to help prevent future issues in this area a direct comparison
and diff minimisation from current upstream version (b515258) of zvol.c.
Differential Revision: https://reviews.freebsd.org/D1302
MFC after: 1 month
X-MFC-With: r276063 & r276066
Sponsored by: Multiplay
Use #define zfsdev_state_lock spa_namespace_lock instead of replacing all
zfsdev_state_lock with spa_namespace_lock to minimise changes from upstream.
Differential Revision: D1302
MFC after: 1 month
X-MFC-With r276063
Sponsored by: Multiplay
Also correct as per style(9) on the use of #ifdef comments.
This is a no-op change as pre-cursor to a full cleanup and merge with
upstream zvol changes.
Sponsored by: Multiplay
kernel does not panic with zfs_panic_recover.
Illumos issue:
5438 zfs_blkptr_verify should continue after zfs_panic_recover
Reported by: Coverity
CID: 1232014
As of r270383, the dbuf_compare comparator compares the dbuf
attributes in the following order:
db_level (indirect level)
db_blkid (block number)
db_state (current state)
the address of the element
Because db_state is being considered before the element's state,
changing of db_state would affect balancedness of the AVL tree,
even when the address of element compares differently. For
instance, in dbuf_create, db_state may be altered after the
node is inserted into the AVL tree and may break AVL tree
balancedness.
Instead of using db_state as a comparision critera (introduced
in r270383), consider it only when we are doing a lookup, that
is one of the two dbuf pointers contains DB_SEARCH.
Illumos issue:
5422 preserve AVL invariants in dn_dbufs
MFC after: 2 weeks
into namecache, to avoid cache trashing when doing large operations.
E.g., tar archive extraction is not usually followed by access to many
of the files created.
Right now, each VOP_LOOKUP() implementation explicitely knowns about
this quirk and tests for both MAKEENTRY flag presence and op != CREATE
to make the call to cache_enter(). Centralize the handling of the
quirk into VFS, by deciding to cache only by MAKEENTRY flag in VOP.
VFS now sets NOCACHE flag for CREATE namei() calls.
Note that the change in semantic is backward-compatible and could be
merged to the stable branch, and is compatible with non-changed
third-party filesystems which correctly handle MAKEENTRY.
Suggested by: Chris Torek <torek@pi-coral.com>
Reviewed by: mckusick
Tested by: pho
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
Convert ARC flags to use enum. Previously, public flags are defined in
arc.h and private flags are defined in arc.c which can lead to confusion
and programming errors.
Consistently use 'hdr' (when referencing arc_buf_hdr_t) instead of 'buf'
or 'ab' because arc_buf_t are often named 'buf' as well.
Illumos issue:
5369 arc flags should be an enum
5370 consistent arc_buf_hdr_t naming scheme
MFC after: 2 weeks
Remove "dbuf phys" db->db_data pointer aliases.
Use function accessors that cast db->db_data to the appropriate
"phys" type, removing the need for clients of the dmu buf user
API to keep properly typed pointer aliases to db->db_data in order
to conveniently access their data.
sys/cddl/contrib/opensolaris/uts/common/fs/zfs/zap_leaf.c:
In zap_leaf() and zap_leaf_byteswap, now that the pointer alias
field l_phys has been removed, use the db_data field in an on
stack dmu_buf_t to point to the leaf's phys data.
sys/cddl/contrib/opensolaris/uts/common/fs/zfs/dbuf.c:
Remove the db_user_data_ptr_ptr field from dbuf and all logic
to maintain it.
sys/cddl/contrib/opensolaris/uts/common/fs/zfs/dbuf.c:
sys/cddl/contrib/opensolaris/uts/common/fs/zfs/dnode.c:
sys/cddl/contrib/opensolaris/uts/common/fs/zfs/sys/dbuf.h:
sys/cddl/contrib/opensolaris/uts/common/fs/zfs/sys/dmu.h:
sys/cddl/contrib/opensolaris/uts/common/fs/zfs/dsl_dataset.c:
sys/cddl/contrib/opensolaris/uts/common/fs/zfs/dsl_dir.c:
sys/cddl/contrib/opensolaris/uts/common/fs/zfs/sa.c:
sys/cddl/contrib/opensolaris/uts/common/fs/zfs/zap.c:
sys/cddl/contrib/opensolaris/uts/common/fs/zfs/zap_micro.c:
Modify the DMU buf user API to remove the ability to specify
a db_data aliasing pointer (db_user_data_ptr_ptr).
cddl/contrib/opensolaris/cmd/zdb/zdb.c:
sys/cddl/contrib/opensolaris/uts/common/fs/zfs/dmu_diff.c:
sys/cddl/contrib/opensolaris/uts/common/fs/zfs/dmu_objset.c:
sys/cddl/contrib/opensolaris/uts/common/fs/zfs/dmu_send.c:
sys/cddl/contrib/opensolaris/uts/common/fs/zfs/dmu_traverse.c:
sys/cddl/contrib/opensolaris/uts/common/fs/zfs/dmu_tx.c:
sys/cddl/contrib/opensolaris/uts/common/fs/zfs/dsl_bookmark.c:
sys/cddl/contrib/opensolaris/uts/common/fs/zfs/dsl_dataset.c:
sys/cddl/contrib/opensolaris/uts/common/fs/zfs/dsl_deadlist.c:
sys/cddl/contrib/opensolaris/uts/common/fs/zfs/dsl_deleg.c:
sys/cddl/contrib/opensolaris/uts/common/fs/zfs/dsl_destroy.c:
sys/cddl/contrib/opensolaris/uts/common/fs/zfs/dsl_dir.c:
sys/cddl/contrib/opensolaris/uts/common/fs/zfs/dsl_pool.c:
sys/cddl/contrib/opensolaris/uts/common/fs/zfs/dsl_prop.c:
sys/cddl/contrib/opensolaris/uts/common/fs/zfs/dsl_scan.c:
sys/cddl/contrib/opensolaris/uts/common/fs/zfs/dsl_synctask.c:
sys/cddl/contrib/opensolaris/uts/common/fs/zfs/dsl_userhold.c:
sys/cddl/contrib/opensolaris/uts/common/fs/zfs/sa.c:
sys/cddl/contrib/opensolaris/uts/common/fs/zfs/spa.c:
sys/cddl/contrib/opensolaris/uts/common/fs/zfs/spa_history.c:
sys/cddl/contrib/opensolaris/uts/common/fs/zfs/zap.c:
sys/cddl/contrib/opensolaris/uts/common/fs/zfs/zap_leaf.c:
sys/cddl/contrib/opensolaris/uts/common/fs/zfs/zap_micro.c:
sys/cddl/contrib/opensolaris/uts/common/fs/zfs/zfs_ioctl.c:
sys/cddl/contrib/opensolaris/uts/common/fs/zfs/sys/dsl_dataset.h:
sys/cddl/contrib/opensolaris/uts/common/fs/zfs/sys/dsl_dir.h:
sys/cddl/contrib/opensolaris/uts/common/fs/zfs/sys/zap_impl.h:
sys/cddl/contrib/opensolaris/uts/common/fs/zfs/sys/zap_leaf.h:
Create and use the new "phys data" accessor functions
dsl_dir_phys(), dsl_dataset_phys(), zap_m_phys(),
zap_f_phys(), and zap_leaf_phys().
sys/cddl/contrib/opensolaris/uts/common/fs/zfs/sys/dsl_dataset.h:
sys/cddl/contrib/opensolaris/uts/common/fs/zfs/sys/dsl_dir.h:
sys/cddl/contrib/opensolaris/uts/common/fs/zfs/sys/zap_impl.h:
sys/cddl/contrib/opensolaris/uts/common/fs/zfs/sys/zap_leaf.h:
Remove now unused "phys pointer" aliases to db->db_data
from clients of the DMU buf user API.
Illumos issue:
5314 Remove "dbuf phys" db->db_data pointer aliases in ZFS
MFC after: 2 weeks
In addition to r273158, make the code in spa_sync() that checks if the
current TXG is a no-op TXG less fragile.
Illumos issue:
5347 idle pool may run itself out of space
MFC after: 2 weeks
Add a loader tunable, vfs.zfs.arc_meta_min, which controls how much metadata
ZFS should keep in ARC at minimum.
In arc_evict(), when doing recycle, take more factors into account by
applying the following policy:
1. If no evictable data, evict metadata;
2. If no evictable metadata, evict data;
3. If we hit arc_meta_limit, evict metadata;
4. If we haven't hit arc_meta_min, evict data;
5* (Illumos only, not present in new FreeBSD code, yet) evict the oldest
cached element from data and metadata.
(FreeBSD) evict the data type specified by caller, which is the
existing behavior.
Note that because of our splitted locks (implemented in r205231 to improve
scalability by reducing lock contention), implementing the fifth Illumos
behavior will not be cheap, so for now just implement the 1-4 and fall back
to current behavior for 5.
Illumos issue:
5368 ARC should cache more metadata
MFC after: 2 months (assuming we didn't found better solution)
Expose arc_meta_limit, et al via kstats.
Note that as a result, vfs.zfs.arc_meta_used is removed.
The existing vfs.zfs.arc_meta_limit sysctl/tunable is retained
with a SYSCTL_PROC wrapper.
Illumos ZFS issues:
3561 arc_meta_limit should be exposed via kstats
Relnotes: yes
MFC after: 2 weeks
Verify that the block pointer is structurally valid, before attempting to
read it in. It can only be invalid in the case of a ZFS bug, but this
change will help identify such bugs in a more transparent way, by
panic'ing with a relevant message, rather than indexing off the end of an
array or something.
Illumos issue:
5349 verify that block pointer is plausible before reading
MFC after: 2 weeks
Reduce scrub activities when system there is enough dirty data, namely when
dirty data is more than zfs_vdev_async_write_active_min_dirty_percent (once
we start to increase the number of concurrent async writes).
While there also correct rounding error which would make scrub end up
pausing for (zfs_txg_timeout + 1) seconds instead of the desired
zfs_txg_timeout seconds.
Illumos issue:
5351 scrub goes for an extra second each txg
5352 scrub should pause when there is some dirty data
MFC after: 2 weeks
If zio_checksum_error() returns other than ECKSUM (e.g. EINVAL), it does not
fill in the "zio_bad_cksum_t *info" parameter. Caller should not attempt to
use it in this case.
Illumos issue:
5348 zio_checksum_error() only fills in info if ECKSUM
MFC after: 2 weeks
If a dnode has a spill block and there is an error while accessing
a data block then traverse_dnode() loses information about that error
and returns a status of visiting the spill block.
This issue is discovered by Spectra Logic.
Illumos issue:
5311 traverse_dnode may report success when it should not
Original author: gibbs
MFC after: 2 weeks
When importing a pool, don't assume that the passed pool configuration
at vdev_load is always vaild. It's possible that a stale configuration
that comes with extra vdevs, where metaslab_init() would fail because
of lower layer returns error.
Change the code to make metaslab_init() handle and return errors from
lower layer and pass it back to upper layer and handle it there.
Illumos issue:
5213 panic in metaslab_init due to space_map_open returning ENXIO
MFC after: 2 weeks
In the old days callout(9) had 1 tick precision and that was inadequate
for some uses, e.g. DTrace profile module, so we had to emulate cyclic
API and behavior. Now we can directly use callout(9) in the very few
places where cyclic was used.
Differential Revision: https://reviews.freebsd.org/D1161
Reviewed by: gnn, jhb, markj
MFC after: 2 weeks
In dsl_dataset_hold_obj() we used zap_contains(.., DS_FIELD_LARGE_BLOCKS)
to determine whether the extensible (zapifyed) dataset have large blocks.
The code expects the result be either 0 (found) or ENOENT (not found),
however reused the variable 'err' which later code expects to be 0.
Fix this by adopting similar code construct that is used later for
DS_FIELD_BOOKMARK_NAMES, which uses a temporary variable zaperr to catch
errors from zap_* rountines.
Reported by: Peter J. Creath (on FreeNAS; FreeNAS bug #6848)
Illumos issue: 5393 spurious failures from dsl_dataset_hold_obj()
Reviewed by: mahrens
Sponsored by: iXsystems, Inc.
X-MFC with: r274337
It is implemented for LUNs backed by ZVOLs in "dev" mode and files.
GEOM has no such API, so for LUNs backed by raw devices all LBAs will
be reported as mapped/unknown.
MFC after: 2 weeks
Sponsored by: iXsystems, Inc.
In file included from cddl/contrib/opensolaris/common/ctf/ctf_create.c:31:
In file included from sys/cddl/contrib/opensolaris/uts/common/sys/sysmacros.h:34:
sys/cddl/contrib/opensolaris/uts/common/sys/isa_defs.h:334:9: warning: '_ILP32' macro redefined [-Wmacro-redefined]
#define _ILP32
^
<built-in>:26:9: note: previous definition is here
#define _ILP32 1
^
1 warning generated.
This is because clang 3.5.0 started predefining _ILP32 and __ILP32__ for
the i386 arch. (Earlier versions already predefined _LP64 and __LP64__
for the x86_64 arch.)
Reviewed by: emaste, avg, smh, delphij, markj
Differential Revision: https://reviews.freebsd.org/D1187
This rounding up was lost in a mismerge of illumos code.
See r268075 MFV r267565.
After that commit zio_compress_data() no longer performs any compressed
size adjustment, so it needs to be done externally. On FreeBSD we round
up the size using vdev_ashift rather than SPA_MINBLOCKSIZE so that 4KB
devices are properly supported.
Additionally, zero out the buffer tail only if compression succeeds.
The compression is considered successful if the size of compressed
data after rounding up to account for the vdev ashift is less than the
original data size. It does not make sense to have the data compressed
if all the savings are lost to rounding up.
With the new zio_compress_data() it could have been possible that the
rounded compressed size would be greater than the original size and thus
we could zero beyond the allocated buffer if the zeroing code was kept
at the original place.
Discussed with: delphij, gibbs
MFC after: 2 weeks
X-MFC with: r274627
Size of physical ZIOs must never be implicitly adjusted, it's
a responsibility of a caller to make sure that such a ZIO has proper offset
and size.
Discussed with: delphij, gibbs
MFC after: 2 weeks
After r265152 TRIM requests are ZIO_TYPE_FREE instead of ZIO_TYPE_IOCTL
this meant file backed vdevs to attempted to process the ZIO as a write
causing a panic.
We now disable TRIM on file backed vdevs and ASSERT the ZIO types supported
by each vdev type to ensure we explicity support the ZIO type being
processed.
Also ensure that TRIM on init is not procesed for devices which declare they
didn't support TRIM via vdev_notrim.
PR: 195061, 194976, 191573
Sponsored by: Multiplay
have both kern_open() and kern_openat(); change the callers to use
kern_openat().
This removes one (sometimes two) levels of indirection and
consolidates arguments checks.
Reviewed by: mckusick
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
ZFS large block support.
Please note that booting from datasets that have recordsize greater
than 128KB is not supported (but it's Okay to enable the feature on
the pool). This *may* remain unchanged because of memory constraint.
Limited safety belt is provided for mounted root filesystem but use
caution is advised.
Illumos issue:
5027 zfs large block support
MFC after: 1 month
We have observed that arc_release() can be called concurrently with a
l2arc in-flight write.
Also, we have observed that arc_hdr_destroy() can be called from
arc_write_done() for a zio with ZIO_FLAG_IO_REWRITE flag in similar
circumstances.
Previously the l2arc headers would be freed while leaking their
associated compression buffers. Now the buffers are placed on
l2arc_free_on_write list for delayed freeing. This is similar to what
was already done to arc buffers that were supposed to be freed
concurrently with in-flight writes of those buffers.
In addition to fixing the discovered leaks this change also adds some
protective code to assert that a compression buffer associated with a
l2arc header is never leaked.
A new kstat l2_cdata_free_on_write is added. It keeps a count of
delayed compression buffer frees which previously would have been leaks.
Tested by: Vitalij Satanivskij <satan@ukr.net> et al
Requested by: many
MFC after: 2 weeks
Sponsored by: HybridCluster / ClusterHQ
For ZVOL-backed LUNs this allows to inform initiators if storage's used or
available spaces get above/below the configured thresholds.
MFC after: 2 weeks
Sponsored by: iXsystems, Inc.
crash.sh script attached to FreeNAS bug 4109:
https://bugs.freenas.org/issues/4109
Three are in the snapshot layer:
a) AVG explains in his notes: https://wiki.freebsd.org/AvgVfsSolarisVsFreeBSD
"VOP_INACTIVE must not do any destructive actions to a vnode
and its filesystem node, nor invalidate them in any way."
gfs_vop_inactive and zfsctl_snapshot_inactive did just that. In
OpenSolaris VOP_INACTIVE is much closer to FreeBSD's VOP_RECLAIM.
Rename & move them to gfs_vop_reclaim and zfsctl_snapshot_reclaim
and merge in the requisite vnode_destroy from zfsctl_common_reclaim.
b) gfs_lookup_dot and various zfsctl functions do not honor the
FreeBSD VFS convention of only locking from the root downward. When
looking up ".." the convention is to drop the current leaf vnode lock before
acquiring the directory vnode and then subsequently re-acquiring the lock on the
leaf vnode. This fixes that in all the places that our exercised by crash.sh.
c) The snapshot may already be unmounted when the directory vnode is reclaimed.
Check for this case and return.
One in the common layer:
d) Callers of traverse expect the reference to the vnode passed in to be
maintained. Don't release it.
This last one may be an unclear contract. There may in fact be some callers that
do expect the reference to be dropped on success in addition to callers that
expect it to be released. In this case a further audit of the callers is needed
and a consensus on the correct behavior.
PR: 184677
Submitted by: kmacy
Reviewed by: delphij, will, avg
MFC after: 2 weeks
Sponsored by: iXsystems
* Use a constant to define the number of stack frames in a probe exception.
* Only allow function symbols in powerpc64 ('.' prefixed)
* Set the fbtp_roffset for return probes, so the correct dtrace_probe call is
made.
MFC after: 1 week
- Wrong integer type was specified.
- Wrong or missing "access" specifier. The "access" specifier
sometimes included the SYSCTL type, which it should not, except for
procedural SYSCTL nodes.
- Logical OR where binary OR was expected.
- Properly assert the "access" argument passed to all SYSCTL macros,
using the CTASSERT macro. This applies to both static- and dynamically
created SYSCTLs.
- Properly assert the the data type for both static and dynamic
SYSCTLs. In the case of static SYSCTLs we only assert that the data
pointed to by the SYSCTL data pointer has the correct size, hence
there is no easy way to assert types in the C language outside a
C-function.
- Rewrote some code which doesn't pass a constant "access" specifier
when creating dynamic SYSCTL nodes, which is now a requirement.
- Updated "EXAMPLES" section in SYSCTL manual page.
MFC after: 3 days
Sponsored by: Mellanox Technologies
in userland rename in-kernel getenv()/setenv() to kern_setenv()/kern_getenv().
This fixes a namespace collision with libc symbols.
Submitted by: kmacy
Tested by: make universe
When processing async destroys ZFS would leak space every txg timeout
(5 seconds by default), if no writes occurred, until the pool is totally
full. At this point it would be unfixable without a pool recreation.
In addition if the machine was rebooted with the pool in this situation
would fail to import on boot, hanging indefinitely, as the import process
requires the ability to write data to the pool. Any attempts to query the
pool status during the hung import would not return as the import holds
the pool lock.
The only way to import such a pool would be to specify -o readonly=on
to the zpool import.
zdb -bb <pool> can be used to check for "deferred free" size which is where
this lost space will be counted.
MFC after: 3 days
Sponsored by: Multiplay
Without this change the accounting of L2ARC usage would be wrong and
give 16EB free space because the number became negative and overflows.
Obtained from: FreeNAS (issue #6239)
MFC after: 2 weeks
controls how much fraction, 1/2^arc_shrink_shift, should be reclaimed
when there is memory pressure.
Submitted by: Richard Kojedzinszky <krichy at tvnetwork.hu>
MFC after: 2 weeks
Refactor the code and stop restore_object from creating two transactions.
Illumos issue:
3693 restore_object uses at least two transactions to restore an object
MFC after: 2 weeks
FreeBSD has ARC_BUFC_NUMMETADATALISTS metadata lists and ARC_BUFC_NUMDATALISTS
data lists (currently both are 16) while illumos has just a single list
of each kind.
headroom determines how much data is scanned on a single list
during each run of the l2arc feed thread.
Because FreeBSD has more lists we proportionally decrease the limit.
Reviewed by: Brendan Gregg (earlier version)
MFC after: 2 weeks
Sponsored by: HybridCluster
FreeBSD has ARC_BUFC_NUMMETADATALISTS metadata lists and ARC_BUFC_NUMDATALISTS
data lists (currently both are 16) while illumos has just a single list
of each kind.
L2ARC_WRITE_SIZE determines the default value of l2arc_write_max which
defines limits on how much data is scanned and written to a cache device
during each run of the l2arc feed thread. The limits are applied on the
per buffer list basis.
Because FreeBSD has more lists we proportionally reduce the limits.
Reviewed by: Brendan Gregg (earlier version)
MFC after: 2 weeks
Sponsored by: HybridCluster
Don't inherit flags other than DS_FLAG_CI_DATASET and DS_FLAG_INCONSISTENT
when cloning. This prevents DS_FLAG_DEFER_DESTROY being inherited from a
clone that is marked for deferred destroy, which causes snapshots of the
clone being destroyed when getting a hold or clone.
Illumos issue:
5150 zfs clone of a defer_destroy snapshot causes strangeness
MFC after: 1 week
Add tunable for number of metaslabs per vdev
(vfs.zfs.vdev.metaslabs_per_vdev). The default remains
at 200.
Illumos issue:
5161 add tunable for number of metaslabs per vdev
MFC after: 2 weeks
In arc_kmem_reap_now(), reap range_seg_cache too to reclaim memory in
response of memory pressure.
Illumos issue:
5163 arc should reap range_seg_cache
MFC after: 1 week
Make space_map_truncate() always do space_map_reallocate(). Without
this, setting space_map_max_blksz would cause panic for existing pool,
as dmu_objset_set_blocksize would fail if the object have multiple blocks.
Illumos issues:
5164 space_map_max_blksz causes panic, does not work
5165 zdb fails assertion when run on pool with recently-enabled
spacemap_histogram feature
MFC after: 2 weeks
Remove previously added kmem methods in favour of defines which
allow diff minimisation between upstream code base.
Rebalance ARC free target to be vm_pageout_wakeup_thresh by default
which eliminates issue where ARC gets minimised instead of balancing
with VM pageout. The restores the target point prior to r270759.
Bring in missing upstream only changes which move unused code to
further eliminate code differences.
Add additional DTRACE probe to aid monitoring of ARC behaviour.
Enable upstream i386 code paths on platforms which don't define
UMA_MD_SMALL_ALLOC.
Fix mixture of byte an page values in arc_memory_throttle i386 code
path value assignment of available_memory.
PR: 187594
Review: D702
Reviewed by: avg
MFC after: 1 week
X-MFC-With: r270759 & r270861
Sponsored by: Multiplay
When performing snapshot renames we could deadlock due to the locking
in zvol_rename_minors. In order to avoid this use the same workaround
as zvol_open in zvol_rename_minors.
Add missing zvol_rename_minors to dsl_dataset_promote_sync.
Protect against invalid index into zv_name in zvol_remove_minors.
Replace zvol_remove_minor calls with zvol_remove_minors to ensure
any potential children are also renamed.
Don't fail zvol_create_minors if zvol_create_minor returns EEXIST.
Restore the valid pool check in zfs_ioc_destroy_snaps to ensure we
don't call zvol_remove_minors when zfs_unmount_snap fails.
PR: 193803
MFC after: 1 week
Sponsored by: Multiplay
This fix addresses only issues with the pynfs reports, none of these
issues are know to create problems for extant real clients.
Submitted by: Bart Hsiao <bart.hsiao@gmail.com>
Reworked by: myself
Reviewed by: rmacklem
Approved by: rmacklem
Sponsored by: QNAP Systems Inc.
This is checked for in the zfs_snapshot_004_neg STF/ATF test (currently
still in projects/zfsd rather than head).
sys/cddl/contrib/opensolaris/uts/common/fs/zfs/zfs_vfsops.c:
- zfsvfs_create(): Check whether the objset name fits into
statfs.f_mntfromname, and return ENAMETOOLONG if not. Although
the filesystem can be unmounted via the umount(8) command, any
interface that relies on iterating on statfs (e.g. libzfs) will
fail to find the filesystem by its objset name, and thus assume
it's not mounted. This causes "zfs unmount", "zfs destroy",
etc. to fail on these filesystems, whether or not -f is passed.
MFC after: 1 month
Sponsored by: Spectra Logic
MFSpectraBSD: 974872 on 2013/08/09
This is primarily only of interest to ZFS developers, but it makes it
easier to get additional debugging.
Submitted by: gibbs
MFC after: 1 month
Sponsored by: Spectra Logic
MFSpectraBSD: 517074 on 2011/12/15 (by will), 662343 on 2013/03/20 (by gibbs)
If bpobj_space() returned non-zero here, the sublist would have been
left open, along with the bonus buffer hold it requires. This call
does not invoke any calls to bpobj_close() itself.
This bug doesn't have any known vector, but was found on inspection.
MFC after: 1 week
Sponsored by: Spectra Logic
Affects: All ZFS versions starting 21 May 2010 (illumos cde58dbc)
MFSpectraBSD: r1050998 on 2014/03/26
Summary:
Fix the stack tracing for dtrace/powerpc by using the trapexit/asttrapexit
return address sentinels instead of checking within the kernel address space.
As part of this, I had to add new inline functions. FBT traces the kernel, so
we have to have special case handling for this, since a trap will create a full
new trap frame, and there's no way to pass around the 'real' stack. I handle
this by special-casing 'aframes == 0' with the trap frame. If aframes counts
out to the trap frame, then assume we're looking for the full kernel trap frame,
so switch to the real stack pointer.
Test Plan: Tested on powerpc64
Reviewers: rpaulo, markj, nwhitehorn
Reviewed By: markj, nwhitehorn
Differential Revision: https://reviews.freebsd.org/D788
MFC after: 3 week
Relnotes: Yes
* vfs.zfs.vdev.async_write_active_min_dirty_percent
* vfs.zfs.vdev.async_write_active_max_dirty_percent
Added validation of min / max for ZFS sysctl
* vfs.zfs.dirty_data_max_percent
MFC after: 3 days
Correctly report hole at end of file.
When asked to find a hole, the DMU sees that there are no holes in the
object, and returns ESRCH. The ZPL interprets this as "no holes before
the end of the file", and therefore inserts the "virtual hole" at the
end of the file. Because DMU and ZPL have different ideas of where the
end of an object/file is, we will end up returning the end of file,
which is generally larger, instead of returning the end of object.
The fix is to handle the "virtual hole" in the DMU. If no hole is found,
the DMU will return a hole at the end of the file, rather than an error.
Illumos issue:
5139 SEEK_HOLE failed to report a hole at end of file
MFC after: 1 week
In zil_claim, don't issue warning if we get EBUSY (inconsistent) when
opening an objset, instead, ignore it silently.
Illumos issue:
5140 message about "%recv could not be opened" is printed when booting after crash
MFC after: 1 week
Add a new tunable/sysctl, vfs.zfs.free_max_blocks, which can be used to
limit how many blocks can be free'ed before a new transaction group is
created. The default is no limit (infinite), but we should probably have
a lower default, e.g. 100,000.
With this limit, we can guard against the case where ZFS could run out of
memory when destroying large numbers of blocks in a single transaction
group, as the entire DDT needs to be brought into memory.
Illumos issue:
5138 add tunable for maximum number of blocks freed in one txg
MFC after: 2 weeks
Enforce 4K as smallest indirect block size (previously the smallest
indirect block size was 1K but that was never used).
This makes some space estimates more accurate and uses less memory
for some data structures.
Illumos issue:
5141 zfs minimum indirect block size is 4K
MFC after: 2 weeks
In dnode_sync(), do dnode_increase_indirection() before processing
the dn_next_nblkptr.
Illumos issue:
5117 space map reallocation can cause corruption
MFC after: 3 days
Also restore kmem_used() check for i386 as it has KVA limits that the raw
page counts above don't consider
PR: 187594
Reviewed by: peter
X-MFC-With: r270759
Review: D700
Sponsored by: Multiplay
Prior to this change we triggered ARC reclaim when kmem usage passed 3/4
of the total available, as indicated by vmem_size(kmem_arena, VMEM_ALLOC).
This could lead large amounts of unused RAM e.g. on a 192GB machine with
ARC the only major RAM consumer, 40GB of RAM would remain unused.
The old method has also been seen to result in extreme RAM usage under
certain loads, causing poor performance and stalls.
We now trigger ARC reclaim when the number of free pages drops below the
value defined by the new sysctl vfs.zfs.arc_free_target, which defaults
to the value of vm.v_free_target.
Credit to Karl Denninger for the original patch on which this update was
based.
PR: 191510 and 187594
Tested by: dteske
MFC after: 1 week
Relnotes: yes
Sponsored by: Multiplay
tracepoints would continue to generate traps, which would be ignored but
could consume noticeable amounts of CPU if, say, all functions in the kernel
were instrumented.
X-MFC-With: r270067
duplicating the entire implementation for both x86 and powerpc. This makes
it easier to add support for other architectures and has no functional
impact.
Phabric: D613
Reviewed by: gnn, jhibbits, rpaulo
Tested by: jhibbits (powerpc)
MFC after: 2 weeks
In vdev_get_stats, check that the vdev is not a hole before computing the
fragmentation. This fixes a panic when removing log device.
Illumos issue:
5049 panic when removing log device
Author: Alex Reece <alex@delphix.com>
MFC after: 2 weeks
Encode CPU's number by XOR'ing the CPU ID against the 64-bit cpu_ticks().
Reviewed by: mav, gibbs
Differential Revision: https://phabric.freebsd.org/D521
MFC after: 2 weeks
In dnode_children_t, use C99's "[]" idiom for declaring the variable
sized array dnc_children at the end of the structure.
This prevents the compiler from mistakenly optimizing away accesses
beyond the array's defined size.
Illumos issue:
5038 Remove "old-style" flexible array usage in ZFS.
Author: Justin T. Gibbs <justing@spectralogic.com>
MFC after: 2 weeks
This prevents recursion of vdev_queue_io_done as per r265321 but
using a different method as recommended on the openzfs list.
We now use zio_interrupt(zio) and return ZIO_PIPELINE_STOP instead
of returning ZIO_PIPELINE_CONTINUE from vdev_*_io_start methods.
zio_vdev_io_start now ASSERTS the that vdev_op_io_start returns
ZIO_PIPELINE_STOP to ensure future changes don't reintroduce
ZIO_PIPELINE_CONTINUE returns.
Cleanup flow in vdev_geom_io_start while I'm here.
Also fix some cases not using SET_ERROR(..)
MFC after: 2 weeks
X-MFC-With: r265321
nanouptime() instead of getnanouptime(). nanouptime(9) provides more
precise result at expense of being slower.
In r269223, gethrtime() is used as creation time of dbuf, which in turn
acts as portion of lookup key to maintain AVL invariant where there can
not be duplicate items. Before this change, gethrtime() have preferred
better execution time by sacrificing precision, which may lead to panic
on busy systems with:
panic: avl_find() succeeded inside avl_add()
Reported by: allanjude, mav
PR: kern/192284
MFC after: 11 days
X-MFC-with: r269223
Increase default ARC buf_hash_table size. When typical block size is small,
the hash table could be too small, which would lead to long hash chains and
limit performance for cached reads.
A new loader tunable, vfs.zfs.arc_average_blocksize, have been added which
allows users to override the default assumption of average (typical) block
size. Old default was 65536 (64 KiB) and new default is 8192 (8 KiB).
Illumos issue:
5034 ARC's buf_hash_table is too small
MFC after: 2 weeks
Change dn->dn_dbufs from linked list to AVL tree.
Illumos issues:
4873 zvol unmap calls can take a very long time for larger datasets
MFC after: 2 weeks
code behave more like it is on Solaris.
Reported by: avg
Reviewed by: avg, mav (but bugs are mine)
Differential Revision: https://phabric.freebsd.org/D457
postponing it to zfs_vget(). zfs_root() returned vnode with the
default value of v_hash, which caused inconsistent v_hash value when
root vnode was obtained from zfs_vget().
Nullfs allocated two upper vnodes for the root zfs vnode due to
different hashes, causing consistency problems.
Reported and tested by: Harald Schmalzbauer <h.schmalzbauer@omnilan.de>
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Import Illumos changes to address the following Illumos issues:
4976 zfs should only avoid writing to a failing non-redundant
top-level vdev
4978 ztest fails in get_metaslab_refcount()
4979 extend free space histogram to device and pool
4980 metaslabs should have a fragmentation metric
4981 remove fragmented ops vector from block allocator
4982 space_map object should proactively upgrade when feature
is enabled
4984 device selection should use fragmentation metric
MFC after: 2 weeks
been transferred from zio_compress_data to its caller. Therefore, passing
the 'minblocksize' down will be a no-op.
Eliminate the parameter to reduce diff against upstream.
MFC after: 2 weeks
read workload by splitting the single teardown rrw lock into
RRM_NUM_LOCKS (17) of them.
Read acquisitions are randomly distributed among these locks based
on curthread pointer. Write acquisitions are going to all the
locks, which for the usage of this type of lock should be rare.
Illumos issue:
5008 lock contention (rrw_exit) while running a read only load
MFC after: 2 weeks
When a sync task is waiting for a txg to complete, we should hurry it along
by increasing the number of outstanding async writes (i.e. make
vdev_queue_max_async_writes() return a larger number).
Illumos issue:
4753 increase number of outstanding async writes when sync task is waiting
MFC after: 2 weeks
Change the interaction between the DMU and ARC so that when the DMU is
shutting down an objset, we do not evict the data from the ARC. Instead
we simply coordinate the destruction of the DMU's data with the ARC.
The only case where we actually need to explicitly evict from the ARC is
when dbuf_rele_and_unlock() determines that the administrator has requested
that it not be kept in memory, via the primarycache/secondarycache properties.
In this case, we evict the data from the ARC by its blkptr_t, the same way
as when a block is freed we explicitly evict it from the ARC.
Illumos issue:
4631 zvol_get_stats triggering too many reads
MFC after: 2 weeks
Instead of asserting all zio's be properly aligned, only assert
on the logical ones.
Cap uberblocks at 8k, otherwise with ashift=17, there would be
only one uberblock.
This fixes a problem that zdb would trip assert on pools with
ashift >= 0xe (8k).
While there, also change the code so it only attempt to condense
space map unless the uncondensed size consumes greater than
zfs_metaslab_condense_block_threshold blocks.
Illumos issue:
4958 zdb trips assert on pools with ashift >= 0xe
MFC after: 2 weeks
Improve extreme rewind import.
When doing an "extreme rewind" import ("zpool import -XF"), we attempt
to verify all data in the pool, essentially scrubbing the entire pool.
The problem is that spa_load_verify_cb() issues an unbounded number of
concurrent scrub i/os. This can lead to all of memory being used for
these zio's, wedging the system. Like normal scrub, we need to put a
cap on the number of outstanding i/os, and have the traverse thread
block when we reach this cap.
For this purpose the cap can be very large (10,000) to optimize the
elevator algorithm. Three kernel tunables have been added:
vfs.zfs.spa_load_verify_maxinflight
vfs.zfs.spa_load_verify_metadata
vfs.zfs.spa_load_verify_data
The latter two tunables controls whether metadata and/or user data
when doing extreme rewind.
Make 'zpool import -T' imply scrub.
Make zpool import -T <txg> accept hexadecimal values for the txg when
prefixed with 0x.
Skip txg's for which there is no uberblock when doing extreme rewind.
Skip reading all user data twice by skipping prefetches when doing
extreme rewinds as we do not access via the ARC.
Illumos issues:
4970 need controls on i/o issued by zpool import -XF
4971 zpool import -T should accept hex values
4972 zpool import -T implies extreme rewind, and thus a scrub
4973 spa_load_retry retries the same txg
4974 spa_load_verify() reads all data twice
MFC after: 2 weeks
the upstream implementation and helps ensure that a trap induced by tracing
fbt::trap:entry is handled without recursively generating another trap.
This makes it possible to run most (but not all) of the DTrace tests under
common/safety/ without triggering a kernel panic.
Submitted by: Anton Rang <anton.rang@isilon.com> (original version)
Phabric: D95
Use reserved space for ZFS administrative commands.
We reserve 1/2^spa_slop_shift = 1/32 or 3.125% of pool space (or 32MB at
least) for system use. Most ZPL operations, e.g. write(2), creat(2), will
fail with ENOSPC if we fall below this.
Certain operations, e.g. file removal and most administrative actions,
still permitted until half of the slop space is used. This would allow
users to use these operations to free up space in the pool when pool is
close to full but half of slop space is still free.
A very restricted set of operations that frees up space or change quota
are always permitted, regardless of the amount of free space.
MFC after: 2 weeks
Explicitly mark file removal transactions as "presumed to result
in a net free of space" so they will not fail with ENOSPC.
Illumos issue: 4950 files sometimes can't be removed from a full
filesystem
MFC after: 2 weeks
While it is possible to create and write file, modify its permissions, etc.
without ever doing sync, it looks odd that it is required for setting
extended file attributes on ZFS. UFS does not do sync there too.
Samba uses those extended attributes to store some its data, and doing it
synchronously by many times reduces file creation performance for systems
without SLOG device.
Reviewed by: delphij, jpaetzel, silence on fs@
MFC after: 2 weeks
Sponsored by: iXsystems, Inc.
This includes:
o All directories named *ia64*
o All files named *ia64*
o All ia64-specific code guarded by __ia64__
o All ia64-specific makefile logic
o Mention of ia64 in comments and documentation
This excludes:
o Everything under contrib/
o Everything under crypto/
o sys/xen/interface
o sys/sys/elf_common.h
Discussed at: BSDcan
6679140 asymmetric alloc/dealloc activity can induce dynamic variable drops
6679193 dtrace_dynvar walker produces flood of dtrace_dynhash_sink
This finishes a set of merges from the older OpenSolaris releases.
Still the FreeBSD port has many differences that are difficult to
account for but that seems normal given that the kernels are different.
MFC after: 1 week
6851093 system drops to kmdb with anonymous dtrace probes + kmdb
This has no effect on FreeBSD (code is ifdef'ed) but is useful as
reference for future merges.
MFC after: 1 week
Don't check ZVOL_WCE flag, used in Solaris to control device "write cache".
It is not applicable on FreeBSD and by default set to "disable".
MFC after: 3 days
These have no effect on FreeBSD, in fact they are ifdef'ed,
but make easier future merges:
6699767 panic in spec_open()
6718877 crgetzoneid() use can cause problems when forking processes with
USDT providers in a non global zone
MFC after: 3 days
MFV r260708
4427 pid provider rejects probes with valid UTF-8 names
Use of u8_textprep.c broke the build on powerpc.
Reported by: bz, rpaulo and tinderbox.
Pointyhat: me
These changes prevent sysctl(8) from returning proper output,
such as:
1) no output from sysctl(8)
2) erroneously returning ENOMEM with tools like truss(1)
or uname(1)
truss: can not get etype: Cannot allocate memory
there is an environment variable which shall initialize the SYSCTL
during early boot. This works for all SYSCTL types both statically and
dynamically created ones, except for the SYSCTL NODE type and SYSCTLs
which belong to VNETs. A new flag, CTLFLAG_NOFETCH, has been added to
be used in the case a tunable sysctl has a custom initialisation
function allowing the sysctl to still be marked as a tunable. The
kernel SYSCTL API is mostly the same, with a few exceptions for some
special operations like iterating childrens of a static/extern SYSCTL
node. This operation should probably be made into a factored out
common macro, hence some device drivers use this. The reason for
changing the SYSCTL API was the need for a SYSCTL parent OID pointer
and not only the SYSCTL parent OID list pointer in order to quickly
generate the sysctl path. The motivation behind this patch is to avoid
parameter loading cludges inside the OFED driver subsystem. Instead of
adding special code to the OFED driver subsystem to post-load tunables
into dynamically created sysctls, we generalize this in the kernel.
Other changes:
- Corrected a possibly incorrect sysctl name from "hw.cbb.intr_mask"
to "hw.pcic.intr_mask".
- Removed redundant TUNABLE statements throughout the kernel.
- Some minor code rewrites in connection to removing not needed
TUNABLE statements.
- Added a missing SYSCTL_DECL().
- Wrapped two very long lines.
- Avoid malloc()/free() inside sysctl string handling, in case it is
called to initialize a sysctl from a tunable, hence malloc()/free() is
not ready when sysctls from the sysctl dataset are registered.
- Bumped FreeBSD version to indicate SYSCTL API change.
MFC after: 2 weeks
Sponsored by: Mellanox Technologies
2915 DTrace in a zone should see "cpu", "curpsinfo", et al
2916 DTrace in a zone should be able to access fds[]
2917 DTrace in a zone should have limited provider access
MFC after: 2 weeks
4427 pid provider rejects probes with valid UTF-8 names
This make use of Solaris' u8_validate() which we happen to
use since r185029 for ZFS.
Illumos Revision: 1444d846b126463eb1059a572ff114d51f7562e5
Reference:
https://www.illumos.org/issues/4427
Obtained from: Illumos
MFC after: 2 weeks
usage from dtrace. The dtrace code already uses cdevpriv(9) since FreeBSD
8, so this change should be quite harmless.
Reviewed by: markj
Approved by: markj
MFC after: never
the 4 byte-aligned dtrace_invop_callsite can be found and that it
immediately follows the call to dtrace_invop(). Secondly, fix some pointer
arithmetic to account for differences between struct i386_frame and illumos'
struct frame. Finally, ensure that dtrace_getarg() isn't inlined. It works
by following a fixed number of frame pointers to the probe site, so inlining
breaks it.
MFC after: 3 weeks
first five for probes entered through a UD fault (i.e. FBT probes).
Specifically, handle the fact that dtrace_invop_callsite must be
16 byte-aligned and thus may not immediately follow the call to
dtrace_invop() in dtrace_invop_start(). Also fetch register arguments and
the stack pointer through a struct trapframe instead of a struct reg.
PR: 191260
Submitted by: luke.tw@gmail.com
MFC after: 3 weeks
defined. This ensures that the sdt:zfs:: probes appear despite the fact
the sdt provider is defined in the kernel rather than in zfs.ko.
Reported by: hiren
Tested by: hiren
MFC after: 2 weeks
selection. gethrtime() in our port updated with HZ rate, so unusable for
this specific purpose, completely draining benefit of multiple taskqueues.
MFC after: 2 weeks
Add a new zfs property, "redundant_metadata" which can have values "all" or
"most". The default will be "all", which is the current behavior. When set
to all, ZFS stores an extra copy of all metadata. If a single on-disk block
is corrupt, at worst a single block of user data (which is recordsize bytes
long) can be lost.
Setting to "most" will cause us to only store 1 copy of level-1 indirect
blocks of user data files. This can improve performance of random writes,
because less metadata has to be written. In practice, at worst about
100 blocks (of recordsize bytes each) of user data can be lost if a single
on-disk block is corrupt.
The exact behavior of which metadata blocks are stored redundantly may change
in future releases.
Illumos issue: 3835 zfs need not store 2 copies of all metadata
MFC after: 2 weeks
This includes decodes of recent Intel instructions, in particular
VT-x and related instructions. This allows the FBT provider to
locate the exit points of routines that include these new
instructions.
Illumos issues:
3414 Need a new word of AT_SUN_HWCAP bits
3415 Add isainfo support for f16c and rdrand
3416 Need disassembler support for rdrand and f16c
3413 isainfo -v overflows 80 columns
3417 mdb disassembler confuses rdtscp for invlpg
1518 dis should support AMD SVM/AMD-V/Pacifica instructions
1096 i386 disassembler should understand complex nops
1362 add kvmstat for monitoring of KVM statistics
1363 add vmregs[] variable to DTrace
1364 need disassembler support for VMX instructions
1365 mdb needs 16-bit disassembler support
This corresponds to Illumos-gate (github) version
eb23829ff08a873c612ac45d191d559394b4b408
Reviewed by: markj
MFC after: 1 week
4730 metaslab group taskq should be destroyed in metaslab_group_destroy()
Reviewed by: Alex Reece <alex.reece@delphix.com>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Sebastien Roy <sebastien.roy@delphix.com>
Original author: George Wilson
MFC after: 3 days
cause stack overflow for IO's which return ZIO_PIPELINE_CONTINUE
from the zio_vdev_io_start stage and hence don't suspend and complete
in a different thread.
This prevents double fault panic on slow machines running ZFS on
GELI volumes which return EOPNOTSUPP directly to BIO_DELETE requests.
MFC after: 1 month
X-MFC-With: r265152
The changes how TRIM requests are generated to use ZIO_TYPE_FREE + a priority
instead of ZIO_TYPE_IOCTL, until processed by vdev_geom; only then is it
translated the required geom values. This reduces the amount of changes
required for FREE requests to be supported by the new IO scheduler. This
also eliminates the need for a specific DKIOCTRIM.
Also fixed FREE vdev child IO's from running ZIO_STAGE_VDEV_IO_DONE as part
of their schedule.
As the new IO scheduler can result in a request to execute one type of IO to
actually run a different type of IO it requires that zio_trim requests are
processed without holding the trim map lock (tm->tm_lock), as the free request
execute call may result in write request running hence triggering a
trim_map_write_start call, which takes the trim map lock and hence would result
in recused on no-recursive sx lock.
This is based off avg's original work, so credit to him.
MFC after: 1 month
returns ZIO_PIPELINE_CONTINUE from vdev_op_io_start to zio_execute resulting
in the wrong ZIO continuing its pipeline.
This is a serious issue which could cause data loss / corruption but appears
to be limited to error handling such as when vdev_readable(vd) returns false.
MFC after: 2 days
4754 io issued to near-full luns even after setting noalloc threshold
4755 mg_alloc_failures is no longer needed
illumos/illumos@b6240e830b
MFC after: 2 weeks
sites and installing a hook at the kernel's trap handler. The fasttrap code
will emulate the overwritten instruction in some common cases, but otherwise
copies it out into some scratch space in the traced process' address space
and ensures that it's executed after returning from the trap.
In Solaris and illumos, this (per-thread) scratch space comes from some
reserved space in TLS, accessible via the fs segment register. This
approach is somewhat unappealing on FreeBSD since it would require some
modifications to rtld and jemalloc (for static TLS) to ensure that TLS is
executable, and would thus introduce dependencies on their implementation
details. I think it would also be impossible to safely trace static binaries
compiled without these modifications.
This change implements the functionality in a different way, by having
fasttrap map pages into the target process' address space on demand. Each
page is divided into 64-byte chunks for use by individual threads, and
fasttrap's process descriptor struct has been extended to keep track of
any scratch space allocated for the corresponding process.
With this change it's possible to trace all libc functions in a program,
e.g. with
pid$target:libc.so.*::entry {@[probefunc] = count();}
Previously this would generally cause the victim process to crash, as
tracing memcpy on amd64 requires the functionality described above.
Tested by: Prashanth Kumar <pra_udupi@yahoo.co.in> (earlier version)
MFC after: 6 weeks
this is due to a wrong dereference of a vnode when it's not locked and
can be (potentially) recycled. 'sdvp' cannot be locked on zfs_rename()
entry point because the VFS can't be sure that this scenario is
LOR-free (it might violate the parent->child lock acquisition rule).
Dereference 'tdvp' instead, which is already locked on entry, and access
'sdvp' fields only when it's safe, i.e. under ZFS_ENTER scope.
While at it, remove the usage of VOP_REALVP, as long as this is a NOP
on FreeBSD.
Discussed with: avg
Reviewed by: pjd
New ZFS property volmode and sysctl vfs.zfs.vol.mode allow switching ZVOL
between three modes:
geom -- existing fully functional behavior (default);
dev -- exposing volumes only as raw disk device file in devfs;
none -- not exposing volumes outside ZFS.
The "dev" mode is less functional (can't be partitioned, mounted, etc),
but it is faster, and in some scenarios with untrusted consumers safer.
It can be useful for NAS, VM block storages, etc.
The "none" mode may be convenient for backup servers, etc. that don't
need direct data access.
Due to the way ZVOL is integrated with main ZFS code, those property
and sysctl are checked only during pool import and volume creation.
MFC after: 1 month
Sponsored by: iXsystems, Inc.
3580 Want zvols to return volblocksize when queried for physical block size
illumos/illumos-gate@a0b60564df
It is irrelevant for FreeBSD, just reducing diff.
It is an adapted merge from the vendor branch of:
701 UNMAP support for COMSTAR (in part related to ZFS)
2130 zvol DKIOCFREE uses nested DMU transactions
4248 dtrace(1M) should never create DOF with empty probes section
4249 Only probes from the first DTrace object file will be included
Illumos Revision: 4a20ab41aadcb81c53e72fc65886e964e9add59
Reference:
https://www.illumos.org/issues/4248https://www.illumos.org/issues/4249
Obtained from: Illumos
MFC after: 1 month
To reduce the diff struct pcu.cnt field was not renamed, so
PCPU_OP(cnt.field) is still used. pc_cnt and pcpu are also used in
kvm(3) and vmstat(8). The goal was to not affect externally used KPI.
Bump __FreeBSD_version_ in case some out-of-tree module/code relies on the
the global cnt variable.
Exp-run revealed no ports using it directly.
No objection from: arch@
Sponsored by: EMC / Isilon Storage Division
further refinement is required as some device drivers intended to be
portable over FreeBSD versions rely on __FreeBSD_version to decide whether
to include capability.h.
MFC after: 3 weeks
so there is no reason to assert that we won't hit an error. Instead,
just return that error to caller and have the upper layer handle it.
Obtained from: FreeNAS
Reported by: rodrigc
Reviewed by: Matthew Ahrens
MFC after: 2 weeks
that this is done for SDT probes. This fixes the syscall/tst.args.d test,
which was failing because mmap(2)'s sixth argument wasn't available to the
probe.
MFC after: 2 weeks
illumos/illumos-gate@6fb4854bed
This fixes the tst.resize1.d and tst.resize2.d DTrace tests, which have
been failing since r261122 since they were causing dtrace(1) to attempt to
allocate and use large amounts of memory, and get killed by the OOM killer
as a result.
MFC after: 1 month
upstream DTrace code. It indicates that the kernel memory allocator need not
attempt to satisfy non-blocking allocations in low-memory conditions. This
has no direct equivalent in the malloc(9) flags, so it is just defined to 0
for now.
4574 get_clones_stat does not call zap_count in non-debug kernel
zap_count(...) is never called in non-DEBUG kernel.
As result "count" variable is always 0, and "goto fail" is always
reached. This means get_clones_stat function never makes up list
of clones for "clones" properties.
MFC after: 2 weeks
This is done to ensure that visited object IDs are always increasing.
Also, pass correct object ID to prefetch_dnode_metadata for
os_groupused_dnode.
Without this change we would hit an assert if traversal was paused on
a GROUPUSED object, which is unlikely but possible.
Apparently the same change was independently developed by Deplhix.
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
MFC after: 10 days
Sponsored by: HybridCluster
The bug was introduced in r256956 "Improve ZFS N-way mirror read
performance".
The code in vdev_mirror_dva_select erroneously considers already
tried DVAs for the next attempt. Thus, it is possible that a failing DVA
would be retried forever.
As a secondary effect, if the attempts fail with checksum error, then
checksum error reports are accumulated until the original request
ultimately fails or succeeds. But because retrying is going on indefinitely
the cheksum reports accumulation will effectively be a memory leak.
Reviewed by: gibbs
MFC after: 13 days
Sponsored by: HybridCluster
If we prematurely free the name buffer and it gets quickly recycled,
then zfs_rename may see data from another lookup or even unmapped memory
via cn_nameptr.
MFC after: 6 days
Sponsored by: HybridCluster
The bug was introduced in r256956 "Improve ZFS N-way mirror read
performance".
The code in vdev_mirror_dva_select erroneously considers already
tried DVAs for the next attempt. Thus, it is possible that a failing DVA
would be retried forever.
As a secondary effect, if the attempts fail with checksum error, then
checksum error reports are accumulated until the original request
ultimately fails or succeeds. But because retrying is going on indefinitely
the cheksum reports accumulation will effectively be a memory leak.
Reviewed by: gibbs
MFC after: 13 days
Sponsored by: HybridCluster
Otherwise we could run into the following deadlock.
A thread has a transaction open and assigned to a transaction group.
That would prevent the transaction group from be quiesced and synced.
The thread is blocked in getnewvnode_reserve waiting for a vnode to
a be reclaimed. vnlru thread is blocked trying to enter ZFS VOP because
a filesystem is suspended by an ongoing rollback or receive operation.
In its turn the operation is waiting for the current transaction group
to be synced.
zfs_zget is always used outside of active transactions, but zfs_mknode
is always used in a transaction context. Thus, we hoist
getnewvnode_reserve from zfs_mknode to its callers.
While there, assert that ZFS always calls getnewvnode while having
a vnode reserved.
Reported by: adrian
Tested by: adrian
MFC after: 17 days
Sponsored by: HybridCluster
When we encounter an I/O error on a piece of metadata while deleting
a file system or zvol, we don't update the bptree_entry_phys_t's
bookmark. This would lead to double free of bp's which will lead to
space map corruption.
Instead of tolerating and allowing the corruption, panic immediately.
See Illumos #4390 for more details.
4391 panic system rather than corrupting pool if we hit bug 4390
Illumos/illumos-gate@8b36997aa2
MFC after: 2 weeks
4370 avoid transmitting holes during zfs send
4371 DMU code clean up
illumos/illumos-gate@43466aae47
NOTE: Make sure the boot code is updated if a zpool upgrade is
done on boot zpool.
MFC after: 2 weeks
(Note: this change is not applicable to FreeBSD and the file
is not included in build. It's integrated for completeness).
4128 disks in zpools never go away when pulled
illumos/illumos-gate@39cddb10a3
MFC after: 2 weeks
3306 zdb should be able to issue reads in parallel
3321 'zpool reopen' command should be documented in the man page
and help message
illumos/illumos-gate@31d7e8fa33
FreeBSD porting notes: the kernel part of this changeset depends
on Solaris buf(9S) interfaces and are not really applicable for
our use. vdev_disk.c is patched as-is to reduce diverge from
upstream, but vdev_file.c is left intact.
MFC after: 2 weeks
aggregation IDs, as is done in the upstream illumos code. This still
requires some FreeBSD-specific code, as our vmem API is not identical to the
one in illumos.
Submitted by: Mike Ma <mikemandarine@gmail.com>
4171 clean up spa_feature_*() interfaces
4172 implement extensible_dataset feature for use by other zpool
features
illumos/illumos-gate@2acef22db7
MFC after: 2 weeks
4168 ztest assertion failure in dbuf_undirty
4169 verbatim import causes zdb to segfa
4170 zhack leaves pool in ACTIVE state
illumos/illumos-gate@7fdd916c47
MFC after: 2 weeks
child process that were inherited from its parent. However, this should
not be done in the case of a vfork, since the fork handler ends up removing
the tracepoints from the shared vm space, and userland DTrace probes in the
parent will no longer fire as a result.
Now the child of a vfork may trigger userland DTrace probes enabled in its
parent, so modify the fasttrap probe handler to handle this case and handle
the child process in the same way that it would handle the traced process.
In particular, if once traces function foo() in a process that vforks, and
the child calls foo(), fasttrap will treat this call as having come from the
parent. This is the behaviour of the upstream code.
While here, add #ifdef guards to some code that isn't present upstream.
MFC after: 1 month
When a da or ada device dissappears, outstanding IOs fail with
ENXIO, not EIO. The check for EIO was probably copied from Illumos,
where that is indeed the correct errno.
Without this change, pulling a busy drive from a zpool would usually
turn it into UNAVAIL, even though pulling an idle drive would turn
it into REMOVED. With this change, it is REMOVED every time.
Also, vdev_geom_io_intr shouldn't do zfs_post_remove, because that
results in devd getting two resource.fs.zfs.removed events. The
comment said that the event had to be sent directly instead of
through the async removal thread because "the DE engine is using
this information to discard prevoius I/O errors". However, the fact
that vdev_geom_io_intr was never actually sending the events until
now, and that vdev_geom_orphan never sent them at all, and that
vdev_geom_orphan usually gets called about 2 seconds after the
actual removal, means that FreeBSD's userland can cope with a late
event just fine.
Approved by: ken (mentor)
Sponsored by: Spectra Logic Corporation
MFC after: 4 weeks
(64MB). Even if we would find one somehow, ZFS kernel code rejects such
devices. It is funny to look on attempts to read 4 256K vdev labels from
1.44MB floppy, though it is not very practical and quite slow.
The freebsd variant of dmu_write_pages is hidden under _KERNEL
to avoid needlessly pulling in vm_page_t declaration.
Besides, this function seems to be useless for ZFS userland counterpart.
MFC after: 15 days
ZFS never partially validates or invalidates a page.
The higher level VM should not do that either.
mappedread_sf correct operation depends on a page being either fully
valid or invalid.
MFC after: 7 days
