- Move VSHOULDBUSY, VSHOULDFREE, and VTRYRECYCLE into vfs_subr.c so
no one else attempts to grow a dependency on them.
- Now that objects with pages hold the vnode we don't have to do unlocked
checks for the page count in the vm object in VSHOULDFREE. These three
macros could simply check for holdcnt state transitions to determine
whether the vnode is on the free list already, but the extra safety
the flag affords us is probably worth the minimal cost.
- The leafonly sysctl and code have been dead for several years now,
remove the sysctl and the code that employed it from vtryrecycle().
- vtryrecycle() also no longer has to check the object's page count as
the object holds the vnode until it reaches 0.
Sponsored by: Isilon Systems, Inc.
to get from (mount + inode) to vnode. These tables are mostly
copy&pasted from UFS, sized based on desiredvnodes and therefore
quite large (128K-512K). Several filesystems are buggy enough that
they allocate the hash table even before they know if they will
ever be used or not.
Add "vfs_hash", a system wide hash table, which will replace all
the per-filesystem hash-tables.
The fields we add to struct vnode will more or less be saved in
the respective filesystems inodes.
Having one central implementation will save code and will allow us
to justify the complexity of code to dynamically (re)size the hash
at a later point.
to use only the holdcnt to determine whether a vnode may be recycled,
simplifying the V* macros as well as vtryrecycle(), etc.
Sponsored by: Isilon Systems, Inc.
vtryrecycle(). All obj refs also ref the vnode.
- Consistently use v_incr_usecount() to increment the usecount. This will
be more important later.
Sponsored by: Isilon Systems, Inc.
on an unlinked file. We can't know if this is the case until after we
have the lock.
- Lock the vnode in vn_close, many filesystems had code which was unsafe
without the lock held, and holding it greatly simplifies vgone().
- Adjust vn_lock() to check for the VI_DOOMED flag where appropriate.
Sponsored by: Isilon Systems, Inc.
- Add a vn_start_write/vn_finished_write around vlrureclaim so we don't do
writing ops without suspending. This could suspend the vlruproc which
should not be a problem under normal circumstances.
- Manually implement VMIGHTFREE in vlrureclaim as this was the only instance
where it was used.
- Acquire a lock before calling vgone() as it now requires it.
- Move the acquisition of the vnode interlock from vtryrecycle() to
getnewvnode() so that if it fails we don't drop and reacquire the
vnode_free_list_mtx.
- Check for a usecount or holdcount at the end of vtryrecycle() in case
someone grabbed a ref while we were recycling. Abort the recycle, and
on the final ref drop this vnode will be placed on the head of the free
list.
- Move the redundant VOP_INACTIVE protection code into the local
vinactive() routine to avoid code bloat.
- Keep the vnode lock held across calls to vgone() in several places.
- vgonel() no longer uses XLOCK, instead callers must hold an exclusive
vnode lock. The VI_DOOMED flag is set to allow other threads to detect
a vnode which is no longer valid. This flag is set until the last
reference is gone, and there are no chances for a new ref. vgonel()
holds this lock across the entire function, which greatly simplifies
logic.
_ Only vfree() in one place in vgone() not three.
- Adjust vget() to check the VI_DOOMED flag prior to waiting on the lock
in the LK_NOWAIT case. In other cases, check after we have slept and
acquired an exlusive lock. This will simulate the old vx_wait()
behavior.
Sponsored by: Isilon Systems, Inc.
so that the socket lock is held over the test-and-set removal of the
accept filter option during connect, and the two socket mutex regions
(transition to connected, perform accept filter) are combined.
from uipc_socket.c to uipc_accf.c in do_getopt_accept_filter(), so that it
now matches do_setopt_accept_filter(). Slightly reformulate the logic to
match the optimistic allocation of storage for the argument in advance,
and slightly expand the coverage of the socket lock.
socket lock around knlist_init(), so don't.
Hard code the setting of the socket reference count to 1 rather than
using soref() to avoid asserting the socket lock, since we've not yet
exposed the socket to other threads.
This removes two mutex operations from each socket allocation.
so that the socket does not generate SIGPIPE, only EPIPE, when a write
is attempted after socket shutdown. When the option was introduced in
2002, this required the logic for determining whether SIGPIPE was
generated to be pushed down from dofilewrite() to the socket layer so
that the socket options could be considered. However, the change in
2002 omitted modification to soo_write() required to add that logic,
resulting in SIGPIPE not being generated even without SO_NOSIGPIPE when
the socket was written to using write() or related generic system calls.
This change adds the EPIPE logic to soo_write(), generating a SIGPIPE
signal to the process associated with the passed uio in the event that
the SO_NOSIGPIPE option is not set.
Notes:
- The are upsides and downsides to placing this logic in the socket
layer as opposed to the file descriptor layer. This is really fd
layer logic, but because we need so_options, we have a choice of
layering violations and pick this one.
- SIGPIPE possibly should be delivered to the thread performing the
write, not the process performing the write.
- uio->uio_td and the td argument to soo_write() might potentially
differ; we use the thread in the uio argument.
- The "sigpipe" regression test in src/tools/regression/sockets/sigpipe
tests for the bug.
Submitted by: Mikko Tyolajarvi <mbsd at pacbell dot net>
Talked with: glebius, alfred
PR: 78478
MFC after: 1 week
SIGPIPE signal for the duration of the sento-family syscalls. Use it to
replace previously added hack in Linux layer based on temporarily setting
SO_NOSIGPIPE flag.
Suggested by: alfred
Add support for passing in a mutex. If NULL is passed a global
subr_unit mutex is used.
Add alloc_unrl() which expects the mutex to be held.
Allocating a unit will never sleep as it does not need to allocate
memory.
Cut possible range in half so we can use -1 to mean "out of number".
Collapse first and last runs into the head by means of counters.
This saves memory in the common case(s).
at some point result in a status event being triggered (it should
be a link down event: the Microsoft driver design guide says you
should generate one when the NIC is initialized). Some drivers
generate the event during MiniportInitialize(), such that by the
time MiniportInitialize() completes, the NIC is ready to go. But
some drivers, in particular the ones for Atheros wireless NICs,
don't generate the event until after a device interrupt occurs
at some point after MiniportInitialize() has completed.
The gotcha is that you have to wait until the link status event
occurs one way or the other before you try to fiddle with any
settings (ssid, channel, etc...). For the drivers that set the
event sycnhronously this isn't a problem, but for the others
we have to pause after calling ndis_init_nic() and wait for the event
to arrive before continuing. Failing to wait can cause big trouble:
on my SMP system, calling ndis_setstate_80211() after ndis_init_nic()
completes, but _before_ the link event arrives, will lock up or
reset the system.
What we do now is check to see if a link event arrived while
ndis_init_nic() was running, and if it didn't we msleep() until
it does.
Along the way, I discovered a few other problems:
- Defered procedure calls run at PASSIVE_LEVEL, not DISPATCH_LEVEL.
ntoskrnl_run_dpc() has been fixed accordingly. (I read the documentation
wrong.)
- Similarly, the NDIS interrupt handler, which is essentially a
DPC, also doesn't need to run at DISPATCH_LEVEL. ndis_intrtask()
has been fixed accordingly.
- MiniportQueryInformation() and MiniportSetInformation() run at
DISPATCH_LEVEL, and each request must complete before another
can be submitted. ndis_get_info() and ndis_set_info() have been
fixed accordingly.
- Turned the sleep lock that guards the NDIS thread job list into
a spin lock. We never do anything with this lock held except manage
the job list (no other locks are held), so it's safe to do this,
and it's possible that ndis_sched() and ndis_unsched() can be
called from DISPATCH_LEVEL, so using a sleep lock here is
semantically incorrect. Also updated subr_witness.c to add the
lock to the order list.
asynchronously by different threads. Thus, declare as volatile the
reference count that is accessed through m_ext's pointer, ref_cnt.
Revert the previous change, revision 1.144, that casts as volatile a
single dereference of ref_cnt.
Reviewed by: bmilekic, dwhite
Problem reported by: kris
MFC after: 3 days
