1
0
mirror of https://git.FreeBSD.org/src.git synced 2024-12-17 10:26:15 +00:00
Commit Graph

4628 Commits

Author SHA1 Message Date
Mike Makonnen
0a9b210037 Make subroutine names more conformant with other scripts in rc.d.
MFC After: 2 weeks
2007-03-31 09:03:38 +00:00
Mike Makonnen
624321b5a8 Record rc.d/nfslocking dependency on rc.d/rpcbind.
PR: conf/105465
Submitted By: ru (with minor cosmetic change)
MFC-After: 1 month
2007-03-30 19:08:58 +00:00
Mike Makonnen
cc164aba90 Some rc.d commands (such as stop|restart etc.) won't automagically work
if we don't explicitly set the name of the executable program.

PR: conf/104408
2007-03-30 18:36:45 +00:00
Andrey A. Chernov
78f66a0f21 Oops wrong line commented out in prev fix 2007-03-29 21:44:23 +00:00
Andrey A. Chernov
e8670c2c4e Back out network.subr :- fix and comment out dhc*_fxp0 examples instead
Submitted by:   jhb
2007-03-29 21:42:19 +00:00
Andrey A. Chernov
2395c8cbfc Fix get_if_var() with 3 args (i.e. with default)
All xxx_<ifname> flags are set to empty strings automatically earlier so
eval echo \${${prefix}${_if}${suffix}-${_default}}
not substitute the default but return just the empty string.
Fix it using
eval echo \${${prefix}${_if}${suffix}:-${_default}}
(i.e. treat empty strings as unset)

The bug manifistates itself with the following warning from checkyesno():
/etc/rc.d/dhclient: WARNING: $background_dhclient is not set properly -
see rc.conf(5)
2007-03-29 10:55:33 +00:00
Brooks Davis
3f857d8115 Use "-ne" instead of "!=" for integer comparison. 2007-03-25 23:58:46 +00:00
Mike Makonnen
bcbff0a86f Having gone to the trouble of setting up a variable, we should use it. 2007-03-25 19:45:20 +00:00
Maxime Henrion
fffe34c5a8 Make "/etc/rc.d/syscons start" correctly reload screensaver settings.
The code looks for all the loaded screensaver modules, tries to
kldunload them, and only loads the new one if kldstat's output shows
that there aren't any left.  However, the regexp looking for modules
to unload was still searching according to the the old naming scheme,
splash_<name>.ko, instead of <name>_saver.ko.

MFC after:	3 days
2007-03-12 22:35:43 +00:00
Brooks Davis
0b45d130bf Allow background_fsck_delay to be set to a negative value which delays
the background fsck indefinitely.  This allows the administrator to run
it at a convenient time.  To support running it from cron, the
forcestart argument now causes the fsck to start with no delay and all
output to be suppressed.
2007-03-11 06:53:07 +00:00
Yaroslav Tykhiy
b5af060613 Prepend ${_chroot} to a pathname in a consistent and robust way:
insert a slash between ${_chroot} and the pathname if and only if
${_chroot} is set to a non-empty string.  Now the pathname is very
likely to be absolute, but we shouldn't take that for granted.
2007-03-10 13:37:44 +00:00
Yaroslav Tykhiy
15240ba819 As suggested more than once in the lists, drop -M from flags to mfs
for /tmp and /var.  This makes the memory discs swap-backed instead
of malloc-backed.  A swap-backed memory disc should not be worse
than a malloc-backed one in any scenario because it will start
touching swap only when needed.  OTOH, a malloc-backed disc can
starve limited kernel resources and evenually crash the system.

Reflect the change in the rc.conf(5) manpage.  Also stop telling
lies there about softupdates: it does not waste disc space, it
just can delay its freeing.

Suggested by:	many
PR:		kern/87255
MFC after:	1 week
2007-03-06 13:13:53 +00:00
Nate Lawson
4fce38ec78 Get rid of chatter for failed commands if the filesystem is read-only.
Include /var/db/entropy-file in the reseeding if present.  It is used for
last-ditch efforts to save entropy and thus should also be used to seed
the RNG when starting.  Print a warning instead of an error if writing the
file fails -- err() exits, preventing the umask from being restored.
Also, since there's not much that can be done about it, notifying the user
is all that's needed.

MFC after:	2 weeks
2007-03-03 06:39:06 +00:00
Hajimu UMEMOTO
d7f16299fc Turn default address selection on by default. Now, when
ipv6_enable="NO", an IPv4 address is preferred for a
destination address.

MFC after:	1 month
2007-03-03 06:36:32 +00:00
Brooks Davis
a9e1dd9098 Use get_if_var() to retrieve interface specific values of dhclient_flags
and background_dhclient.  This allows interfaces who's names are not
valid parts of shell variables and shortens the code.

MFC after:	1 week
2007-03-02 20:48:35 +00:00
Florent Thoumie
d08ec00718 - Add missing subdirectories in BSD.usr.dist mtree file.
- Update hier(7) to reflect latest changes in mtree file.
- Add UPDATING entry following Intel firmwares inclusion.

Submitted by:	mlaier
MFC after:	1 month
2007-03-02 14:56:15 +00:00
Florent Thoumie
7bd6fde395 - Add Intel firmwares for Intel PRO/Wireless LAN 2100/2200/2915 cards in a
uuencoded format along with their respective LICENSE files.
- Add new share/doc/legal directory to BSD.usr.dist mtree file. This is the
place we install LICENSE files for restricted firmwares.
- Teach firmware(9) and kmod.mk about licensed firmwares. Restricted firmwares
won't load properly unless legal.<name>.license_ack is set to 1, either
via kenv(1) or /boot/loader.conf.

Reviewed by:	mlaier, sam
Permitted by:	Intel (via Andrew Wilson)
MFC after:	1 month
2007-03-02 11:42:56 +00:00
Matt Jacob
e770bc6bf5 First cut at GEOM based multipath. This is an active/passive{/passive...}
arrangement that has no intrinsic internal knowledge of whether devices
it is given are truly multipath devices. As such, this is a simplistic
approach, but still a useful one.

The basic approach is to (at present- this will change soon) use camcontrol
to find likely identical devices and and label the trailing sector of the
first one. This label contains both a full UUID and a name. The name is
what is presented in /dev/multipath, but the UUID is used as a true
distinguishor at g_taste time, thus making sure we don't have chaos
on a shared SAN where everyone names their data multipath as "Fred".

The first of N identical devices (and N *may* be 1!) becomes the active
path until a BIO request is failed with EIO or ENXIO. When this occurs,
the active disk is ripped away and the next in a list is picked to
(retry and) continue with.

During g_taste events new disks that meet the match criteria for existing
multipath geoms get added to the tail end of the list.

Thus, this active/passive setup actually does work for devices which
go away and come back, as do (now) mpt(4) and isp(4) SAN based disks.

There is still a lot to do to improve this- like about 5 of the 12
recommendations I've received about it,  but it's been functional enough
for a while that it deserves a broader test base.

Reviewed by: pjd
Sponsored by: IronPort Systems
MFC: 2 months
2007-02-27 04:01:58 +00:00
Remko Lodder
217d9e4862 Only match on log messages containing fail,invalid,
bad or illegal. This prevents matching on systems that
have a name that matches the query.

PR:		conf/107560
Submitted by:	Christian Laursen <cfsl at pil dot dk>
MFC after:	3 days
Approved by:	imp (mentor)
2007-02-23 21:42:54 +00:00
Remko Lodder
4ee46876eb Move to the preferred syntax for nice (-n) instead
of the depricated one.

PR:		conf/108611
Submitted by:	TAOKA Fumiyoshi <fmysh at iijmio-mail dot jp>
Approved by:	imp (mentor)
2007-02-23 18:44:20 +00:00
Warner Losh
1a5f5dc097 fix comment about what pnpinfo is set 2007-02-15 16:38:10 +00:00
Yaroslav Tykhiy
d798671ba8 pkill(1) and pgrep(1) have been moved to /bin so that they are
available to rc.d scripts early in the boot sequence.
2007-02-15 06:51:31 +00:00
Yaroslav Tykhiy
5f9af361f4 Don't be paranoid about hostname(1) and order the things logically.
Pointed out by:	ceri
2007-02-15 06:46:33 +00:00
Yaroslav Tykhiy
01b777f4cb Don't nag about unset $hostname if DHCP is in use.
Pointed out by:	ceri
2007-02-15 06:42:42 +00:00
Joerg Wunsch
0411582e87 Add some entries to log unknown devices, based on the bus they appear
on.

Some things appear to be completely missing though, like the USB vendor
and product strings.
2007-02-14 08:13:54 +00:00
Yaroslav Tykhiy
aad85353cc Handle the case when the admin forgot to set $hostname,
which can happen in new installations: advise to set the
variable and refer to rc.conf(5).
2007-02-10 13:13:32 +00:00
Florent Thoumie
2d69b43eb2 Add support for EtherChannel configuration to rc startup scripts.
Note: This also deprecates "NO" as a way to specify an empty list of
interfaces for gif_interfaces.

PR:		conf/104884
Submitted by:	nork
Harassed by:	brd
Discussed with:	brooks, dougb
2007-02-09 12:11:27 +00:00
John Polstra
bd4dbd7879 Use egrep instead of grep so that reporting of login failures (broken
by revision 1.6) works again.  This fix is already in RELENG_6, but was
never committed to HEAD.
2007-02-05 16:36:25 +00:00
Marcel Moolenaar
d62866b236 o Remove screen, created by the unnecessary ofw_console(4)
o  Remove ttyyX, created by the obsolete zs(4)
o  Replace ttydX by ttyuX, which is created by uart(4)
o  Enable ttyu0 as a console to better support the xserve.

MFC after: 1 week
2007-01-26 06:22:34 +00:00
Mike Pritchard
a0072eda86 Add the following knobs for quotas if they are enabled:
quotaon_flags - flags for the quotaon command
quotaoff_flags - flags for the quotaoff command
quotacheck_flags - flags for the quotacheck command
2007-01-20 04:24:20 +00:00
Simon L. B. Nielsen
26d67ea70f Fix jail rc.d script privilege escalation via symlink attack against
/var/log/console.log and mount points.

Security:	FreeBSD-SA-07:01.jail
2007-01-11 18:18:57 +00:00
Nate Lawson
907b6777c1 Re-work Cx handling to be per-cpu and asymmetrical, fixing support on
modern dual-core systems as well.

- Parse the _CST packages for each cpu and track all the states individually,
on a per-cpu basis.

- Revert to generic FADT/P_BLK based Cx control if the _CST package
is not present on all cpus. In that case, the new driver will
still support per-cpu Cx state handling. The driver will determine the
highest Cx level that can be supported by all the cpus and configure the
available Cx state based on that.

- Fixed the case where multiple cpus in the system share the same
registers for Cx state handling. To do that, added a new flag
parameter to the acpi_PkgGas and acpi_bus_alloc_gas functions that
enable the caller to add the RF_SHAREABLE flag.  This flag could also be
useful to other callers (acpi_throttle?) in the tree but this change is
not yet made.

- For Core Duo cpus, both cores seems to be taken out of C3 state when
any one of the cores need to transition out. This broke the short sleep
detection logic.  It is disabled now if there is more than one cpu in
the system for now as it fixed it in my case.  This quirk may need to
be re-enabled later differently.

- Added support to control cx_lowest on a per-cpu basis. There is still
a generic cx_lowest to enable changing cx_lowest for all cpus with a single
sysctl and for ease of use.  Sample output for the new sysctl:

dev.cpu.0.cx_supported: C1/1 C2/1 C3/57
dev.cpu.0.cx_lowest: C3
dev.cpu.0.cx_usage: 0.00% 43.16% 56.83%
dev.cpu.1.cx_supported: C1/1 C2/1 C3/57
dev.cpu.1.cx_lowest: C3
dev.cpu.1.cx_usage: 0.00% 45.65% 54.34%
hw.acpi.cpu.cx_lowest: C3

This work was done by Stephane E. Potvin with some simple reworking by
myself.  Thank you.

Submitted by:	Stephane E. Potvin <sepotvin / videotron.ca>
MFC after:	2 weeks
2007-01-07 21:53:42 +00:00
Florent Thoumie
eacc7cde7d Jail_ip and jail_interface local variables were renamed to _ip and _interface
in a previous commit to avoid namespace collisions, unfortunately I missed two
of them. This leads to the ip alias being incorrectly removed in some cases
when using the stop command.

Reported by:	Philipp Wuensche <cryx-freebsd@h3q.com>
2007-01-02 11:07:13 +00:00
Maxim Konovalov
65e1af96f6 o Fix a comment: refer to the write community name by the OID not by
the line number which is incorrect now and probably will shift in future.
2006-12-31 11:19:48 +00:00
Yaroslav Tykhiy
c7be7e20f6 Allow for /usr/bin/env when parsing the shebang line from an
interpreted $command.  Some "portable" sofware packages use such a
line to skip the task of figuring out the absolute pathname of the
interpreter at install time, e.g.:

	#!/usr/bin/env python

It is insecure, but a popular book on Python seems to have advised
it to a wide audience.  Hence a number of such scripts in the ports,
mostly written in Python.

PR:		bin/100287
MFC after:	1 week
2006-12-31 11:07:29 +00:00
Yaroslav Tykhiy
0c30639059 Use $required_modules wherever suitable. Use load_kld() in special
cases.  So we get rid of quite a few lines of duplicated code.
2006-12-31 10:37:18 +00:00
Yaroslav Tykhiy
619a36fa66 Fix a typo in a warning message. 2006-12-31 10:12:53 +00:00
Yaroslav Tykhiy
45da9952e5 Eliminate global symbols starting with an underscore from rc.d
scripts, except for mdconfig* and jail.  Such symbols are reserved
for the rc.subr internals.  Most scripts can be fixed by just
declaring _foo symbols as local: few scripts actually need them to
be global.

Discussed with:	dougb in freebsd-rc
2006-12-30 22:53:20 +00:00
Paolo Pisati
ff2f6fe80f Summer of Code 2005: improve libalias - part 2 of 2
With the second (and last) part of my previous Summer of Code work, we get:

-ipfw's in kernel nat

-redirect_* and LSNAT support

General information about nat syntax and some examples are available
in the ipfw (8) man page. The redirect and LSNAT syntax are identical
to natd, so please refer to natd (8) man page.

To enable in kernel nat in rc.conf, two options were added:

o firewall_nat_enable: equivalent to natd_enable

o firewall_nat_interface: equivalent to natd_interface

Remember to set net.inet.ip.fw.one_pass to 0, if you want the packet
to continue being checked by the firewall ruleset after being
(de)aliased.

NOTA BENE: due to some problems with libalias architecture, in kernel
nat won't work with TSO enabled nic, thus you have to disable TSO via
ifconfig (ifconfig foo0 -tso).

Approved by: glebius (mentor)
2006-12-29 21:59:17 +00:00
Hiroki Sato
fc61bfebd0 Add "nojail" keyword to prevent spurious error messages.
Spotted by:	Keve Nagy
PR:		conf/107083
2006-12-29 15:56:21 +00:00
Yaroslav Tykhiy
c89572720c MFp4:
Implement the checks for required_* objects as two functions, one
to be run before precmd and the other after it.  They get the current
rc command as an argument so they can choose what requirement tests
to perform.  As of now, only "start" needs such tests.

Implement a new requirement variable, required_modules.  It can
list kernel modules that need to be loaded after start_precmd
indicated success.  Each name in the list can be just "file", or
"file:module", or "file~regex".  This will allow us to remove a lot
of duplicated code from rc.d scripts.

Perform the checks not only for the default start method, but for
any method.  This allows for more flexibility and fixes a few rc.d
scripts (namely newsyslog, pf, sendmail) that rely on a required_*
variable while providing a non-default start method.

To be able to call the new check_required* functions naturally,
remove lots of crufty duplicated code pieces from run_rc_command
and replace each of them by a call to the helper function providing
a single corrected instance of the respective code snippet.  Now
run_rc_command isn't as scary as it used to be, and it even appears
to have quite a nice logic that was obscured by the old crufty code.

In the default handler for restart, run start from a subshell to
protect global varibles, e.g., _postcmd, from modification by the
start handler.  This enables using restart_postcmd. [x]

PR:		conf/98734 [x]
Submitted by:	Rick van der Zwet <rick@wzoeterwoude.net> [x]
Reviewed by:	freebsd-rc (silence for an older version)
MFC after:	1 month
2006-12-27 13:15:33 +00:00
Shteryana Shopova
fd0e516eda Add a (disabled) configuration line to enable snmp_bridge(3) module.
Approved by:	bz (mentor)
2006-12-20 22:10:34 +00:00
Yaroslav Tykhiy
a9e42d31b7 Syscons cannot be stopped, so provide a no-op stop method.
The default stop method from rc.subr isn't suited for this
case and produces a bogus warning: "syscons not running".

Suggested by:	matteo
2006-12-20 12:59:50 +00:00
Yaroslav Tykhiy
51f1dbba96 Improve rc.d conformance:
- don't play a needless trick with prestart, just use start method;
- provide no-op stop method so that we don't get bogus "abi not running" error.
2006-12-20 11:37:15 +00:00
Hiroki Sato
2c615e1a64 Disable IPv6 configuration for interfaces in pccard_ether_start().
After a change of devd.conf, devd(8) handles NIC attach/detach event
by using /etc/pccard_ether with the interface name as the argument.
This model does not work properly with IPv6 configuration because the
implementation of IPv6 stateless auto-configuration in the FreeBSD
rc.d scripts depends on whether there are any explicit configurations
for interfaces or not.  It works this way: if no manual configuration,
it will perform auto-configuration, but otherwise no
auto-configuration will be performed.  So, this behavior can only be
determined by all of the interfaces on a system, not a single one.
For this reason, the network6_interface_setup() function called from
the pccard_ether_start() does not work with a single interface name.
And what is worse, this combination of devd.conf and
pccard_ether_start() caused a bad side-effect that when
ipv6_enable=YES, all of interfaces marked as DOWN would be UP
unconditionally (and router solicitation was sent) just after devd(8)
was invoked.  This should be fixed in a more sophisticated way.
2006-12-08 15:48:42 +00:00
Hiroki Sato
6027060830 Add a link-local address to the lo0 even when ipv6_enable="NO".
A kernel with INET6 always has ::1 on lo0, so in the case of
ipv6_enable="NO" the lo0 can have ::1 with no link-local address.
This is a violation of the IPv6 specification.  As a workaround for
this situation, fe80::1 is added in rc.d/auto_linklocal when lo0 has
no link-local address.  This should not be harmful for IPv4-only users.
2006-12-08 06:34:06 +00:00
Ruslan Ermilov
6b45faf0a4 Move npe.4 to a machine specific manpage subdirectory. 2006-12-05 16:57:10 +00:00
Luigi Rizzo
9b96fa2da3 - put some common code in a function handle_remount();
- add better checks on non-existing directories to prevent error
  messages at run time;
- introduce a function log() to help debugging diskless booting
  when things don't work;
- modify the parsing of diskless_remount so you can add mount_nfs
  options after the pathname. You could use 'remount' to do something
  similar, but this way is more convenient because you don't have to
  hardwire the server name in the command.
- document the above.

I have been running the above in a diskless lab since february on RELENG_6.

MFC after: 1 week
2006-12-03 23:50:29 +00:00
Florent Thoumie
80301cdc8e Teach find_processes() to use ${name}_chroot.
Obtained from:	NetBSD
X-MFC after:	6.2-RELEASE
2006-11-26 22:02:09 +00:00
Florent Thoumie
e1ad9834a0 Remove leading dollar sign in rcvar command output.
There's no dollar use in variable assignment in sh.
Assuming this is can be expected behavior for some
people, this change won't be MFC'ed to RELENG_6.

Discussed with:	yar on -rc
2006-11-26 19:03:19 +00:00