But it returned 1.
It fixes the problem reported by many Japanese people that tcsh 6.14
doesn't work correctly with ja_JP.eucJP locale.
PR: conf/79701
Submitted by: Kazuaki Oda <ybbkaz__at__yahoo.co.jp>
Tested by: many people
MFC after: 1 week
to work with ipmitools. It works with other tools that have an OpenIPMI
driver interface. The port will need to get updated to used this.
I have not implemented the IPMB mode yet so ioctl's for that don't
really do much otherwise it should work like the OpenIPMI version.
The ipmi.h definitions was derived from the ipmitool header file.
The bus attachments are done for smbios and pci/smbios. Differences
in bus probe order for modules/static are delt with. ACPI attachment
should be done.
This drivers registers with the watchdod(4) interface
Work to do:
- BT interface
- IPMB mode
This has been tested on Dell PE2850, PE2650 & PE850 with i386 & amd64
kernel.
I will link this into the build on next week.
Tom Rhodes, helped me with the man page.
Sponsored by: IronPort Systems Inc.
Inspired from: ipmitool & Linux
to "tee" the BSM record stream for the purposes of live monitoring,
intrusion detection, etc. Support for audit pipes will be committed in
the near future.
Obtained from: TrustedBSD Project
was thinking from the pcn(4) perspective instead of the le(4) one when
writing the former version as le(4) supports a superset of the chips
supported by pcn(4) and not the other way round.
kernel audit facility, warnings about the experimental nature of this
implementation, and pointers at a large number of other audit related
man pages.
Obtained from: TrustedBSD Project
rev. 1.77, i.e. remove Am53C974/Am79C970/Am79C974 PCnet-PCI and Am79C970A
PCnet-PCI II.
- Change the entry of the PCnet-Home in the list of supported chips to
match the other ones, i.e. s,PCnet/Home HomePNA,Am79C978 PCnet-Home,.
- s,familly,family
MFC after: 1 day
It detects both: buffer underflows and buffer overflows bugs at runtime
(on free(9) and realloc(9)) and prints backtraces from where memory was
allocated and from where it was freed.
Tested by: kris
specially crafted module. There are several handrolled sollutions to this
problem in the tree already which will be replaced with this. They include
iwi(4), ipw(4), ispfw(4) and digi(4).
No objection from: arch
MFC after: 2 weeks
X-MFC after: some drivers have been converted
cards on the market.
- Remove the entire HARDWARE section. It's superfluous since all
snd_* manual pages have their own HARDWARE sections these days.
Reviewed by: brueffer
update the documentation to reflect that.
PR: docs/86090
Submitted by: Lowell Gilbert <freebsd-bugs-local at be-well dot ilk point org>
MFC after: 3 days
MFC to: RELENG_5, RELENG_6
same behavior to be controlled by the sysctls, hw.syscons.kbd_kbdkey
and hw.syscons.kbd_reboot respectively.
Apologies to the submitter for taking so long to commit this simple
change.
PR: kern/72728
Submitted by: Luca Morettoni <morettoni at libero dot it>
MFC After: 3 days
I couldn't find the ID for the EG1064 anywhere in our sources
so I removed the reference for now.
Pointed out by: Robert Huff <roberthuffi at rcn dot com> [1]
Reviewed by: simon
restored when its removed from the bridge.
At the moment we only clear IFCAP_TXCSUM. Since a locally generated packet on
the bridge may be sent out any one or more interfaces it cant be assumed that
every card does hardware csums. Most bridges don't generate a lot of traffic
themselves so turning off offloading won't hurt, bridged packets are
unaffected.
Tested by: Bruce Walker (bmw borderware.com)
MFC after: 5 days
the names of directories to include in the base ldconfig script.
This will eliminate the need for each port to install its own
boot script which does nothing but ldocnfig a given directory.
This code was developed by flz (ports committer), discussed on
freebsd-rc@, and modified slightly by me.
Submitted by: flz
Reviewed by: brooks
function in years.
- Change the 'ident' paramters to 'wchan' to match <sys/systm.h>.
- Use 'otherwise' in place of 'else' in one place so that this reads like
English rather than C.
- Document the new msleep_spin() function.
- Add history notes for msleep() and msleep_spin().
USB device drivers use to talk to USB devices. This is probably
still a bit rough and it does not yet include the functions specific
to HID, ethernet, hubs, host controller drivers, task threads or
debugging.
Lose pointers to where these files were two major releases ago.
PR: docs/90370
Submitted by: Daniel Feenberg <feenberg at nber dot org>
Harassed by: Daniel Gerzo <danger at rulez dot sk>
variable ("YES" vs. "NO") and be more precise and intuitive on what is
actually allowed/restricted by this variable ("UNIX/IP/route sockets"
vs. "TCP/IP protocols").
MFC after: 3 days
ETHERTYPE_IPV6 frames. Change this to be a sysctl knob so that is able to still
bridge non-IP packets if desired.
Also return early if all pfil_* sysctls are turned off, the user obviously does
not want to filter on the bridge.
2005 when another one comes out. This one, even ADO hopes will be the
last of the year.
Obtained from: Arthur Olson, ftp://elsie.nci.nih.gov/pub/tzdata2005r.tar.gz
with flags bitfield and set BI_CAN_EXEC_DYN flag for all brands that usually
allow executing elf dynamic binaries (aka shared libraries). When it is
requested to execute ET_DYN elf image check if this flag is on after we
know the elf brand allowing execution if so.
PR: kern/87615
Submitted by: Marcin Koziej <creep@desk.pl>
interfaces to bridges, which will then send and receive IP protocol 97 packets.
Packets are Ethernet frames with an EtherIP header prepended.
Obtained from: NetBSD
MFC after: 2 weeks
by default, so add a new knob that is on by default, and check that
knob in start_precmd so that it can run even if cleaning /tmp is
not enabled. This has the advantage of not violating POLA, while
still allowing the user to disable this behavior if they wish (for
example on a server that will never run X).
to light by the PR. Specifically, convert these three scripts
into good rc.d citizens, making sure that their functionality
is preserved, but the rc.d framework rules are not broken.
Add support for cleanvar as a regular rc.d script in the
default rc.conf, and document this in the man page.
Add a descriptive comment to rc.conf that regarding the
three emulation/compatibility services provided by abi
so users will not be confused by these services not having
their own startup scripts.
PR: conf/84574
Submitted by: Alexander Botero-Lowry
means:
o Remove Elf64_Quarter,
o Redefine Elf64_Half to be 16-bit,
o Redefine Elf64_Word to be 32-bit,
o Add Elf64_Xword and Elf64_Sxword for 64-bit entities,
o Use Elf_Size in MI code to abstract the difference between
Elf32_Word and Elf64_Word.
o Add Elf_Ssize as the signed counterpart of Elf_Size.
MFC after: 2 weeks
as part of rc. Doing this, and the sourcing of rc.subr after we have
determined if we are booting diskless (and correspondingly run
rc.initdiskless if necessary) are safe, and actually allow fewer files
to be needed on the diskless box. This also allows variables from
the configuration to be available to rc itself, such as ...
Add a variable to rc.conf, early_late_divider, which designates the
script which separates the early and late stages of the boot process.
Default this to mountcritlocal, and add text to etc/defaults/rc.conf,
rc.conf(5) and diskless(8) which describes how and why one might want
to change this.
Reviewed by: brooks
ago. Document the real behavior of bus_dma_tag_create, bus_dmamap_load,
and other functions. Also document their arguments and return values.
MFC After: 3 days
