under way to move the remnants of the a.out toolchain to ports. As the
comment in src/Makefile said, this stuff is deprecated and one should not
expect this to remain beyond 4.0-REL. It has already lasted WAY beyond
that.
Notable exceptions:
gcc - I have not touched the a.out generation stuff there.
ldd/ldconfig - still have some code to interface with a.out rtld.
old as/ld/etc - I have not removed these yet, pending their move to ports.
some includes - necessary for ldd/ldconfig for now.
Tested on: i386 (extensively), alpha
The new libpthread will provide POSIX threading support using KSE.
These files were previously repo-copied from src/lib/libc_r.
Reviewed by: deischen
Approved by: -arch
after adding __FBSDID().
Garbage-collected kvm_readswap(). This was once used by kvm_uread(), but
kvm_uread() now just reads /proc/<pid>/mem and procfs hopefully handles
swapped out pages.
next step is to allow > 1 to be allocated per process. This would give
multi-processor threads. (when the rest of the infrastructure is
in place)
While doing this I noticed libkvm and sys/kern/kern_proc.c:fill_kinfo_proc
are diverging more than they should.. corrective action needed soon.
KAME did the modification only to _dns_getaddrinfo(). However,
it is not sufficient, and res_queryN() should be modified, too.
So, I did same modification to res_queryN().
Obtained from: KAME
insure enough space is available for the response, or be prepared
to resize the buffer and retry as necessary.
Do the conservative thing and make sure enough space is available.
Reviewed by: silence on freebsd-audit
When it is called directly, gcc is smart enough to generate inline
code for it, which is why it wasn't noticed before that it was missing.
fabs() would probably better fit into libm, but it has traditionally been
in libc on FreeBSD, so there is probably software around that makes
assumptions about this by now.
of pointers to strings. These two arrays were fixed to the same size, but one
had an implicit zeroed trailer element, which was unused because the size was
used up by the ones before said zeroed trailer element. So the unused limb was
chopped off the over-sized-but-not-over-sized array, and everyone lived happily
ever after.
instead of on startup. This fixes binary compatibility of dynamically
linked binaries from before the signal code move.
Suggested by: wollman (a long time ago)
than 32 bits. It was trying to figure out things like the day of week
of when time_t is roughly 2^62 etc. Make a better guess for the starting
point for the binary search that works on both 32 and 64 bit types. I have
been using this for a while now.
bcopy(3) functions are prototyped in <strings.h> and not in
<string.h> anymore.
- Add a sentence about that to the respective HISTORY sections.
In the C source files:
- Include <string.h> or <strings.h> depending on what function
is to be compiled.
- Use ANSI-C function definitions.
.In string.h
with
.In strings.h
and adding a sentence to the HISTORY section.
- Use an ANSI-C function definition.
- Include <strings.h> instead of <string.h>.
- Apply style(9): Put a space after return keywords.
in the ANSI-C format.
- Change the code a bit to hopefully save some cycles.
I.e. (simplified) change
a = b + 1;
while (--b & 0x7)
/* ... */
to
a = b;
for (; b & 0x7; b--)
/* ... */
and
while (--a >= 0)
/* ... */
to
for (; a > 0; a--)
/* ... */
- Equip two function arguments of swab() with the 'restrict'
type qualifier in form of the '__restrict' macro. This is
specified by POSIX.1-2001.
<strings.h> as the associated header file.
The prototypes have been moved there from <string.h> because
POSIX.1-2001 said so.
- Conditionally include either <strings.h> or <string.h> based
on whether the [r]index() or str[r]chr() functions are
compiled, respectively.
- Style(9) tells us to
- put a space after the return keyword
- to check for a NUL character without using the ! operator.
- use NULL instead of (type *)NULL where the compiler knows
the type.
Apply these rules.
- Rather use ANSI-C function definitions than K&R ones.
- For index(3), correct second function argument's type; it was
declared to be a `const char' before and is now an `int'.
is <strings.h> and not <string.h> anymore.
- Tell the reader about this change in the HISTORY section.
- Switch to use an ANSI-C function definition.
- Include <strings.h> instead of <string.h> in the source file.
the prototypes for both functions are now in the <strings.h>
header, as required by IEEE Std 1003.1-2001.
- Add one sentence about that in the HISTORY section.
- Include <strings.h> in the source file to have the prototypes
in scope when the _ANSI_SOURCE macro is defined.
at file flags and replace it with functions that will avoid null
pointer checks.
MFC to be done by archie ;-)
PR: 42100
Reviewed by: archie, robert
MFC after: 3 days
file descriptor bit if poll() returns POLLERR, POLLHUP, or POLLNVAL.
Othewise, it's possible for select() to return successfully but
with no bits set.
Reviewed by: deischen
MFC after: 3 days
PR: bin/42175
on behalf of a thread, we should check the POLLERR, POLLHUP, and
POLLNVAL flags as well to wake up the thread in these cases.
Suggested by: deischen
MFC after: 3 days
to fail needlessly if a reverse DNS lookup of the IP address didn't
come up with a hostname. As a comment in the code clearly stated,
the "damn hostname" was looked up only for the purpose of netgroup
matching. But if that lookup failed, the function bailed out
immediately even though in many cases netgroup matching would not
be used.
This change marks the hostname as unknown but continues. Where
netgroup matching is performed, an unknown hostname is handled
conservatively. I.e., for "+@netgroup" (accept) entries an unknown
hostname never matches, and for "-@netgroup" (reject) entries an
unknown hostname always matches.
In the lines affected (only), I also fixed a few bogus casts. There
are others, and in fact this entire file would be a good candidate
for a cleanup sweep.
Reviewed by: imp (wearing his flourescent yellow Security Team cap)
MFC after: 2 days
called <machine/_types.h>.
o <machine/ansi.h> will continue to live so it can define MD clock
macros, which are only MD because of gratuitous differences between
architectures.
o Change all headers to make use of this. This mainly involves
changing:
#ifdef _BSD_FOO_T_
typedef _BSD_FOO_T_ foo_t;
#undef _BSD_FOO_T_
#endif
to:
#ifndef _FOO_T_DECLARED
typedef __foo_t foo_t;
#define _FOO_T_DECLARED
#endif
Concept by: bde
Reviewed by: jake, obrien
disklabel.h; broken originally by 1.87 of sys/disklabel.h, which
made the split between DKTYPENAMES and FSTYPENAMES.
Someone who knows disklabel.c: do we still need DKTYPENAMES to be
defined here now?
supplied buffer in case the size of it was equal to
the number of characters the converted address consumed.
The bug occurred when converting an AF_INET address.
- Remove the SPRINTF macro and use sprintf instead.
- Do not do string formatting using sprintf(3) and a
temporary buffer which is copied when the supplied
buffer provides enough space. Instead, use snprintf(3)
and the real destination buffer, thus avoid the copy.
Reported by: Stefan Farfeleder <e0026813@stud3.tuwien.ac.at> (1)
PR: misc/41289
definitions of the functions that convert strings to numbers
and are defined by IEEE Std 1003-1.2001.
- Use ANSI-C function definitions for all of the functions
mentioned above plus strtouq and strtoq.
- Update the prototypes in the manual pages.
public prototypes of setbuf(3) and setvbuf(3) using the
'__restrict' macro from <sys/cdefs.h> to be compliant with
IEEE Std 1003.1-2001.
- Replace the K&R with ANSI-C function definitions.
- Bring the manual page up-to-date.
strftime(3) for IEEE Std 1003.1-2001 compliance and remove
excessive usage of the 'const' qualifier that was neither
present in the prototype in the publice header, nor in the
local prototype just above the function definition.
- Replace the K&R function definition with a ANSI-C one.
- Update the prototype of strftime(3) in its manual page.
concatenation and copy functions using the '__restrict' macro.
This is to satisfy IEEE Std 1003-1.2001.
- Use ANSI-C function definitions.
- Add the 'restrict' keyword to the manual pages, too.
to the function definition of strxfrm(3) in form of our
'__restrict' macro.
- Use an ANSI-C function definition for strxfrm(3).
- Change the manual page accordingly.
of our __restrict macro to the prototypes and function
definitions of inet_pton and inet_ntop.
- Use ANSI-C function argument lists.
- Adjust the prototypes in the manual page.
to cause bugs when gcc is more aggressively optimising things.
There are still problems with dtoa mentioned in the PR - maybe
Dan could suggest a patch.
PR: 40209
Submitted by: Dan Lukes <dan@obluda.cz>
Approved by: bde
MFC after: 2 weeks
(unless someone tries to use libufs support functions without using
_fillout or _ctor to construct a uufsd.)
Obtained from: jmallett_libufs Perforce branch.
(I skipped those in contrib/, gnu/ and crypto/)
While I was at it, fixed a lot more found by ispell that I
could identify with certainty to be errors. All of these
were in comments or text, not in actual code.
Suggested by: bde
MFC after: 3 days
- Make getvfsbyname() take a struct xvfsconf *.
- Convert several consumers of getvfsbyname() to use struct xvfsconf.
- Correct the getvfsbyname.3 manpage.
- Create a new vfs.conflist sysctl to dump all the struct xvfsconf in the
kernel, and rewrite getvfsbyname() to use this instead of the weird
existing API.
- Convert some {set,get,end}vfsent() consumers to use the new vfs.conflist
sysctl.
- Convert a vfsload() call in nfsiod.c to kldload() and remove the useless
vfsisloadable() and endvfsent() calls.
- Add a warning printf() in vfs_sysctl() to tell people they are using
an old userland.
After these changes, it's possible to modify struct vfsconf without
breaking the binary compatibility. Please note that these changes don't
break this compatibility either.
When bp will have updated mount_smbfs(8) with the patch I sent him, there
will be no more consumers of the {set,get,end}vfsent(), vfsisloadable()
and vfsload() API, and I will promptly delete it.
#define EDOFUS 88 /* Programming error */
This can be used to signal error situations which indicate that the
program logic or assumptions is deficient.
label updates. Biba and MLS already supported this. This permits the
userland library to submit relative updates on MAC labels, rather
than submitting an entire label to replace the current label. This
also requires changes to the MAC modules, which are forthcoming.
Obtained from: TrustedBSD Project
Sponsored by: DARPA, NAI Labs
variables. Both symbols are set to the same value by the linker,
and _end symbol has less chances to clash with application defined
global symbols.
alpha, ia64 and sparc64 ports already use _end, i386 is now
consistent with them.
Reviewed by: bde
Approved by: obrien
Reported by: pirzyk
currently cached data. It allows a number of nice things, like: removing
fallback code from single locale loading, remove memory leak when LC_CTYPE
data loaded again and again, efficient cache use, not only for
setlocale(locale1); setlocale(locale1), but for setlocale(locale1);
setlocale("C"); setlocale(locale1) too (i.e. data file loaded only once).
towlower() and towupper() required by ISO C90 Amd. 1.
iswascii(), iswhexnumber(), iswideogram(), iswnumber(), iswphonogram(),
iswrune() and iswspecial() have also been implemented for consistency
with the BSD extensions in <ctype.h>.
2) Move incomplete check for / in locale name from env section to
loadlocale(), add check for "." and ".." too.
It allows to check any argument, not env only.
3) Redesing LOAD_CATEGORY macro to eliminate code duplication.
4) Try harder in fallback code: if old locale can't be restored,
load "C" locale
5) White space formatting, long lines, etc.
kernel access control.
Extensions to libc to provide basic MAC label manipulation facilities
for userland. These interface will be replaced in the next month
or two with more flexible interfaces, but provide sufficient support
to allow use of the Biba and MLS policies for user applications.
libc_r wrappers to follow.
Obtained from: TrustedBSD Project
Sponsored by: DARPA, NAI Labs
kernel access control.
Provide a library to manage user file system firewall-like rules
supported by the mac_bsdextended.ko security model. The kernel
module exports the current rule set using sysctl, and this
library provides a front end that includes support for retrieving
and setting rules, as well as printing and parsing them.
Note: as with other userland components, this is a WIP. However,
when used in combination with the soon-to-be-committed ugidfw,
it can actually be quite useful in multi-user environments to
allow the administrator to limit inter-user file operations without
resorting to heavier weight labeled security policies.
Obtained form: TrustedBSD Project
Sponsored by: DARPA, NAI Labs
the PAM_ECHO_PASS option on-the-fly is a NOP (though it wasn't with the
old pam_get_pass(3) code). Instead, call pam_prompt(3) directly. This
actually simplifies the code a bit.
MFC after: 3 days
TCP clients. The problem was that a struct netconfig returned by
getnetconfigent() was being treated as a handle for __rpc_getconf(),
which certainly isn't right.
The tirpc-99 code uses __rpc_setconf("udp")/__rpc_getconf() to find
the IPv4 udp netconfig, but our implementation of these functions
seem happy to return IPv6 entries, so we can't use them. By reverting
to the old version, we are hard-coding the name of the udp4 netid.
Tracked down by: Bakul Shah <bakul@bitblocks.com>
This will make the behavior robuster if many addresses are added
after the size estimation of storage at the first sysctl.
Reviewed by: JINMEI Tatuya <jinmei@isl.rdc.toshiba.co.jp>
MFC after: 1 week
- use strlcpy.
- snprintf can return negative value, so cope with it.
- tweak interface index on interface locals (ff01::/16).
- removed unused macros.
- removed a macro that uses only once (in a trivial context).
- explicitly say goodbye to ENI_xxx.
- constify struct afd.
Obtained from: KAME
MFC after: 1 week
completeness and doesn't get us a working libc_r there because libc_r
uses setjmp() and setjmp() cannot be used for context switches on ia64
as-is (or sparc64). Rather than making setjmp/longjmp behave like
the *context() calls, it would be far better to make libc_r use *context()
directly which is what they are for.
Obtained from: marcel
info. This turned out to be rather useful on ia64 for tracking down
malloc/free problems.
Detect duplicate free()'s - otherwise these show up as a guard1 failure
and it looks like corruption instead of something simple like a second
free() where there shouldn't be.
Deal with libz using libc headers and not seeing the malloc/free stuff that
we provide in libstand. Do similar nastiness to what is done for bzlib.
Tested on: i386, ia64 (compile, run)
- add GLOB_NOMATCH return value and use it when we don't get a match
- rename GLOB_ABEND to GLOB_ABORTED and use it instead of returning 1
in some places
- add GLOB_NOESCAPE flag and retire GLOB_QUOTE to compatibility
section
Suggestions/advice on correct usage of POSIX defines: wollman
support creation times such as UFS2) to the value of the
modification time if the value of the modification time is older
than the current creation time. See utimes(2) for further details.
Sponsored by: DARPA & NAI Labs.
Assembler macros are tidied up and made as similar as sanely possible.
The macros are translated into C (__inline static) functions for lint.
Declaration orders are made the same.
Declarations are all ISOfied and tidied up.
Comment contents have gratuitous diffs removed.
The net result is a bunch of crt1.c's that are 90% the same.
It may be possible to now encapsulate the differences in one
MD header, and have only one MI crt1.c file (although the macros
to do this may be ugly).
Helpful comments by: obrien, bde
Alpha tested by: des
i386-elf tested by: markm
It's silly to call sysctl() to get the value of _PATH_STDPATH from
<paths.h> when we can just use it directly. This greatly simplifies
the implementation. (This is also part of my grand scheme to get
rid of sysctl's `user' category, which should never have been created.)
Use strlcpy() instead of strncpy() as it has the exact semantics we want.
