libulog now only provides functions that are used by various packages
from the ports tree, namely the libutempter ones. There is no reason to
link it into the crunch/fixit binaries anymore.
That is, write 'exec 3<&0' instead of '3<&0'. Due to an sh(1) bug fixed in
r199953, the latter also persisted, provided that fd 3 was not open before.
With newer sh or fd 3 open, it would not delete orphaned catpages.
MFC after: 2 weeks
Unfortunately there are two slight problems with that:
- Yacc and lex might generate code that generates warnings because of
this. Require yacc and lex to be rebuilt during bootstrap. I'm not
incrementing __FreeBSD_version here, because I assume someone else
will do this eventually.
- When running `make buildkernel', it uses share/mk from the source
treeo to build aicasm. Because aicasm also depends on lex, this would
break. Lower WARNS to 5 for now. We should just increment it to 6
again somewhere in the very far future.
which disables doing a make obj. Use it when you know it will work
only. KERNFAST now implies NO_KERNELOBJ, since you don't need to keep
doing obj when doing incremental kernel builds.
The information used by the "Last login:"-line is obtained by using
ulog_setutxfile(3) to switch to the lastlog database. Login and logout
are performed using the utility functions ulog_login(3) and
ulog_logout(3).
This also means we must build libulog during bootstrap.
Approved by: des
files search path and thus -isystem is sufficient. -iprefix is
meant to do something entirely different.
Approved by: ed (mentor)
OKed by: ru, kan
Tested by: make universe
is installed, we should at least have the tzsetup tool available!
Suggested by: Andriy Gapon <avg@freebsd.org>
Noticed by: Ben Kaduk <minimarmot@gmail.com>
MFC after: 1 week
compiled with stack protector.
Use libssp_nonshared library to pull __stack_chk_fail_local symbol into
each library that needs it instead of pulling it from libc. GCC
generates local calls to this function which result in absolute
relocations put into position-independent code segment, making dynamic
loader do extra work every time given shared library is being relocated
and making affected text pages non-shareable.
Reviewed by: kib
Approved by: re (kib)
Use libssp_nonshared library to pull __stack_chk_fail_local symbol into
each library that needs it instead of pulling it from libc. GCC generates
local calls to this function which result in absolute relocations put into
position-independent code segment, making dynamic loader do extra work everys
time given shared library is being relocated and making affected text pages
non-shareable.
Reviewed by: kib
Approved by: re (kensmith)
to possible breakages in the catalog handling code. Since then, that
code has been replaced by the secure code from NetBSD but NLS in libc
remained turned off. Tests have shown that the feature is stable and
working so we can now turn it on again.
- Add several new catalog files:
- ca_ES.ISO8859-1
- de_DE.ISO8859-1
- el_GR.ISO8859-7 (by manolis@ and keramida@)
- es_ES.ISO8859-1 (kern/123179, by carvay@)
- fi_FI.ISO8859-1
- fr_FR.ISO8859-1 (kern/78756, by thierry@)
- hu_HU.ISO8859-2 (by gabor@)
- it_IT.ISO8859-15
- nl_NL.ISO8859-1 (corrections by rene@)
- no_NO.ISO8859-1
- mn_MN.UTF-8 (by ganbold@)
- sk_SK.ISO8859-2
- sv_SE.ISO8859-1
(The catalogs without explicit source has been obtained from NetBSD.)
Approved by: attilio
installing with -DWITHOUT_INFO, otherwise one can experience a
failure trying to installworld on a system that is built with
-DWITHOUT_INFO (i.e., without /usr/bin/install-info).
Reported by: bland
MFC after: 3 days
you can build the cross development tools and install them as
$XDEV-freebsd-xxx for each tool. This allows one to use autoconf to
find the tools for cross building scenarios.
make KERNFAST=blah buildkernel
is now a short cut for
make KERNCONF=blah -DKERNFAST buildkernel
This change works for all kernel config files not named "1". I did
that to make sure that
make -DKERNFAST buildkernel
remains the same as
make -DKERNFAST KERNCONF=GENERIC buildkernel
rather than trying to build and configure "1". I've never seen a
kernel config file named "1," so I think this is a good compromise.
and clean steps. KERNFAST was selected to complement KERNCONF which
is typically used in these scenarios (especially with cross building).
Reviewed by: arch@
32-bit compat libs on amd64 since -march=k8 may generate instructions
that are not implemented on Intel EM64T processors. Instead, use
a simpler set of default flags that should work on all amd64-capable
CPUs.
PR: amd64/113111
Submitted by: NIIMI Satoshi sa2c of sa2c.net
MFC after: 1 week
Specifically, build a 32-bit /usr/bin/ldd32 on amd64 which handles 32-bit
objects. Since it is a 32-bit binary, it can fork a child process which
can dlopen() a 32-bit shared library. The current 32-bit support in ldd
can't do this because it does the dlopen() from a 64-bit process. In order
to preserve an intuitive interface for users, the ldd binary automatically
execs /usr/bin/ldd32 for 32-bit objects. The end result is that ldd on
amd64 now transparently handles 32-bit shared libraries in addition to
32-bit binaries.
Submitted by: ps (indirectly)
- It is opt-out for now so as to give it maximum testing, but it may be
turned opt-in for stable branches depending on the consensus. You
can turn it off with WITHOUT_SSP.
- WITHOUT_SSP was previously used to disable the build of GNU libssp.
It is harmless to steal the knob as SSP symbols have been provided
by libc for a long time, GNU libssp should not have been much used.
- SSP is disabled in a few corners such as system bootstrap programs
(sys/boot), process bootstrap code (rtld, csu) and SSP symbols themselves.
- It should be safe to use -fstack-protector-all to build world, however
libc will be automatically downgraded to -fstack-protector because it
breaks rtld otherwise.
- This option is unavailable on ia64.
Enable GCC stack protection (aka Propolice) for kernel:
- It is opt-out for now so as to give it maximum testing.
- Do not compile your kernel with -fstack-protector-all, it won't work.
Submitted by: Jeremie Le Hen <jeremie@le-hen.org>
source upgrades by falling back to GNU ar(1) as necessary. Option
WITH_BSDAR is gone. Option _WITH_GNUAR to aid in upgrades is *not*
supposed to be set by the user.
Stop bootstrapping BSD ar(1) on the next __FreeBSD_version bump, as
there are no known bugs in it. Bump __FreeBSD_version to anticipate
this and to flag the switch to BSD ar(1), should it be needed for
something.
Input from: obrien, des, kaiw
and usr.bin/truss/ioctl.c. This is the correct way to address the problem
that arises when doing an incremental build after a header used by kdump
has been removed (cf. i4b disconnect a while ago)
Explained by: ru
MFC after: 2 weeks
through scanning its output as ldd(1) returns a non-zero status only
for really abnormal conditions such as an improper file format.
Now cp(1) won't get bogus "not" and "found" arguments if a lib
is missing. [1]
- Don't guess if an element of a complex pipeline is assigned to the main
shell or a sub-shell. Namely use stdio, not vars, to pass lists out from
loops. If using vars, there's the risk that a loop will run in a sub-shell
and the list won't make it to the main shell. It appears that braces and
parens give only limited control over the issue while stdio always works
as intended. Apply this solution to both $progs and $libs for consistency,
although I've failed to go without it only in the $libs part.
Requested by: emaste [1]
I.e., not only copy them to a scratch dir, but also make them use saved
copies of libraries and locale files. That gives us several benefits:
1) ABI breakages should no longer affect installworld over the live system.
2) It becomes safe to run installworld while still running the old kernel.
However, it can be reasonable to save the old /rescue before that to be
able to run the old reboot(8), as the new binaries are rather likely to
fail with the old kernel. Anyhow, it's now possible to upgrade a system
in a single reboot _reliably_.
3) With a bit of hackery around rtld(8), it becomes possible to do destructive
cross-installs, e.g., i386->amd64 over the live system.
The only shared item left between the old and new systems is rtld(8),
which cannot be run from a saved copy easily because its full
pathname is stored in the respective field of each ELF executable.
(In theory, that field could be overridden, e.g., from the environment,
but this can lead to security issues.) That's why a destructive
cross-install isn't possible w/o hackery yet.
Fruitful ideas by: ru
Reviewed by: ru
Tested with: audit(4)
the threading libraries is built. This simplifies the
logic in makefiles that need to check if the pthreads
support is present. It also fixes a bug where we would
build a threading library that we shouldn't have built:
for example, building with WITHOUT_LIBTHR and the default
value of DEFAULT_THREADING_LIB (libthr) would mistakenly
build the libthr library, but not install it.
Approved by: re (kensmith)
their dependency on libc and its versioned symbols. For that to work,
libc needs to be built before any other shared library that might depend
on it. Add necessary glue to make that happen.
Warning, after symbol versioning is enabled, going back is not easy
(use WITHOUT_SYMVER at your own risk).
Change the default thread library to libthr.
There most likely still needs to be a version bump for at least the
thread libraries. If necessary, this will happen later.
lib32 build somewhat. Specifically, instead of spamming
${CC} et al with -I${LIB32TMP}/usr/include which can be
harmful (as has been demonstrated by the ncursesw WIP),
use slightly different approach to achieve the same goal.
This also simplifies things a bit.
Prodded by: rafan
- Remove libnetgraph from the list of prebuilt libraries as
no other library depends on it (snmp_netgraph.so does not
count as we don't build it in the "libraries" target).
- Restore libssh dependencies when compiling with Kerberos
support.
I found one bug. Pass our idea of TARGET_ARCH and TARGET down to
XMAKE, the cross-tools make. Previously it worked because usually
TARGET_ARCH was specified on the initial make's command line.
This should also allow us to simplify the "universe" target, which
I'm currently testing.
TARGET_ARCH correctly. Now it does, even for pc98. We should suggest
TARGET=foo in preference to TARGET_ARCH because the former is
unambiguous and the latter isn't, so update the docs.
This means that a long standing gripe I've had with this comes to a
close. I can build pc98 w/o specify both things. make TARGET=arm
works (rather than trying to build a arm:amd64 image and dying badly
in the attempt).
If you specify only TARGET_ARCH, then you get the old behavior.
# we can likely simplify the UNIVERSE target now to use this, but I'm not
# up for breaking that tonight :-).
# We should consider adding some kind of sanity check for TARGET_ARCH
# and TARGET.
environment for cross building (the same one you'd get interactively
in make buildenv). This cannot be a simple
make -f Makefile.inc1 -V WMAKEENV
because in PATH is not set correctly unless one takes a trip through
the Makefile/Makefile.inc1 indirection, the logic of which is too
large to reproduce outside of Makefiles.
to post January 26 systems where gensnmptree(1) code was already fixed,
there was a timeframe between February 14 and February 27 when
usr.sbin/bsnmpd/ including gensnmptree was disconnected from build, so
if you upgraded in this timeframe, you ended up with the 700014 system
but still with a buggy gensnmptree binary. This also means not being
able to buildworld now.
Reported by: jhb
Attention: harti, keramida
- <netipx> headers [1]
- IPX library (libipx)
- IPX support in ifconfig(8)
- IPXrouted(8)
- new MK_NCP option
New MK_NCP build option controls:
- <netncp> and <fs/nwfs> headers
- NCP library (libncp)
- ncplist(1) and ncplogin(1)
- mount_nwfs(8)
- ncp and nwfs kernel modules
User knobs: WITHOUT_IPX, WITHOUT_IPX_SUPPORT, WITHOUT_NCP.
[1] <netsmb/netbios.h> unconditionally uses <netipx> headers
so they are still installed. This needs to be dealt with.
gensnmptree utility is required at "make depend" time, because it
is used to generate `oid.h' for bsnmpd.
This means that all versions of HEAD before 2004/01/23 16:22:49 need
gensnmptree as a bootstrap util when it's not already installed as
part of the base system. The first __FreeBSD_version that we can
assume this can work is 700014 which happened after the gensnmptree
change (in -r 1.263 of `src/sys/sys/param.h', at 2006/02/17 14:14:15).
For __FreeBSD_version values before 700014 add gensnmptree to the
bootstrap tools, to allow upgrades from versions of FreeBSD before
that date.
Approved by: ru, harti
in the delete-old and check-old targets.
We don't install a lib (libXY.so.Z) as a link, but an user may have created
something like this. This is dangerous if this link points to a different
version of the lib. So check for a link also in the *-lib targets (an
annoyed user which absolutely wants this redirection of a lib should use
libmap.conf instead of a link).
A directory can also be a link, but in this case just echo a message to
remove it by hand.
similar the the Solaris implementation. Repackage the krb5 GSS mechanism
as a plugin library for the new implementation. This also includes a
comprehensive set of manpages for the GSS-API functions with text mostly
taken from the RFC.
Reviewed by: Love Hörnquist Åstrand <lha@it.su.se>, ru (build system), des (openssh parts)
Switch strncpy to strlcpy suggested by gad and issue found by pjd.
Add to uname(3) man page describing:
UNAME_s
UNAME_r
UNAME_v
UNAME_m
Add to getosreldate(3) man page describing:
OSVERSION
Submitted by: ru, pjd/gad
Reviewed by: ru (man pages)
FreeBSD machine. To do this add the man 1 uname changes to __xuname.c
so we can override the settings it reports. Add OSVERSION override
to getosreldate. Finally which Makefile.inc1 to use uname -m instead
of sysctl -n hw.machine_arch to get the arch. type.
With these change you can put a complete FreeBSD OS image into a
chroot set:
UNAME_s=FreeBSD
UNAME_r=4.7-RELEASE
UNAME_v="FreeBSD $UNAME_r #1: Fri Jul 22 20:32:52 PDT 2005 fake@fake:/usr/obj/usr/src/sys/FAKE"
UNAME_m=i386
UNAME_p=i386
OSVERSION=470000
on an amd64 or i386 and it just work including building ports and using
pkg_add -r etc. The caveat for this example is that these patches
have to be applied to FreeBSD 4.7 and the uname(1) changes need to
be merged. This also addresses issue with libtool.
This is usefull for when a build machine has been trashed for an
old release and we want to do a build on a new machine that FreeBSD
4.7 won't run on ...
by a user. Instead, add individual checks as dependencies to
the main "installcheck" target. Make sure that installkernel
etc. depend on it (including the UID/GID checks).
bsd.incs.mk, and use it when installing 32-bit compat libraries
on amd64. This causes it to *not* overwrite native headers with
i386 versions, which was the case with <fenv.h> and <vgl.h>.
PR: amd64/83806
Prodded by: bde
MFC after: 1 week
Reported by: scottl
I'm not very fond of using the non-standard lockf(1) here, but I
have no better idea at the moment. NetBSD uses ln(1) to create a
lock file, but this approach can result in a deadlock if make is
interrupted, leaving an orphaned lock file.
are called (wrapped in ".if make(...)"). This may reduce the amount of
memory needed for all other targets (the file lists are already large
and they will grow further).
- Be verbose in the batch case of the delete-old part too.
- Add a note about the organisation of the sections.
- Expand shell globs (they worked in a previous version of the delete-old
target, but not in this one).
- Use the correct way of checking for a native environment. [1]
- Add some more obsolete files.
- Fix some bad english. [1]
Suggested by: ru [1]
Approved by: mentor (joerg)
- removes obsolete files/dirs or libraries.
- works in interactive (default) and batch mode
- respects DISTDIR
- documented in UPDATING and build(7)
The head of the file ObsoleteFiles.inc contains instructions how to add
obsolete files/dirs/libs to the list. Obviously one should add obsolete
files to this list, when he removes a file/dir/lib from the basesystem.
Additionally add check-old target:
- allows re@ to check if a file on the obsolete list resurfaces
Design goals:
- allows full control by the user (default interactive mode)
- possibility of scripted removal of obsolete files (batch mode)
- opt-in removal of files (explicit list of files)
- seperate removal of libs (2 delete targets)
Important design decissions:
- structured list of files to remove instead of a plain text file:
* allows to remove additional files if a NO_foo knob is specified
without the need to change the targets (no NO_foo knob is respected
yet)
- not using mtree like NetBSD does:
* mtree doesn't has an interactive mode
Discussed on: arch (long ago), current (this year)
Additional input from: re (hrs)
Approved by: mentor (joerg)
native and foreign architectures and comparing products).
They eliminate most of the differences caused by different
object directory paths, timestamping, and identification.
(Note WORLDTMP was renamed to ${OBJTREE}${.CURDIR}/tmp.)
