This allows to boot out of the box on the RPI COmpute Module 3 with 32G
of eMMC.
Tested by: imp confirmed .dtb is in the rpi-firmware pkg
Reviewed by: gjb@, imp@
Pull Request: https://github.com/freebsd/freebsd-src/pull/452
Sponsored by: Netflix
Following 7b1d1a1658, the structure
for the reldoc target has significantly changed as result of the
ASCIIDoctor/Hugo migration. As the release notes related files
on the installation medium are inherently out of date, purge them
entirely.
Discussed within: re, doceng
No objection: re (silence), doceng (silence)
Timeout: 2 weeks
MFC after: 1 week
MFC to: stable/13, stable/12, and stable/11 only
Sponsored by: Rubicon Communications, LLC ("Netgate")
We now have a u-boot port and config.txt for booting on all 64bits
variant of the RPI boards (RPI2v1.1, RPI3* and RPI4*) so use
the new u-boot-rpi-arm64 and the config_arm64.txt files.
Discussed with: karels, kevans
Allwinner bootrom have an alternate location for u-boot at 128k.
Work was made recently in u-boot to relocate correctly if loaded from
there.
The advantage of this offset is that we can now use a GPT scheme.
We create a UFS root filesystem using makefs(8), and later pass it to
mkimg(1) when creating the final image. The correct partition type is
freebsd-ufs; the freebsd parition type is for partitions containing a
BSD disklabel.
Reviewed by: emaste
MFC after: 2 weeks
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D26987
At some poing over the last week, the bootx64.efi file has grown
past the 800KB threshold, resulting in being unable to copy it to
the EFI/BOOT directory.
# stat -f %z efiboot.znWo7m
819200
# stat -f %z stand-test.PIEugN/EFI/BOOT/bootx64.efi
842752
The comment in the script that creates the ISOs suggests that 800KB
is the maximum allowed for the boot code, however I was able to
boot an ISO with a 1024KB boot partition. Additionally, I verified
against an ISO from OtherOS, where the boot EFI partition is 2.4MB.
Sponsored by: Rubicon Communications, LLC (netgate.com)
Some IPMI implementations on arm64 are reportedly unable to load our
memstick installer images, but support the older ISO format. Start
generating these for arm64.
Unlike installer ISOs for other platforms, these images are UEFI-only.
Reviewed by: emaste
Relnotes: yes
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D26452
I've discovered I have this local diff that never got committed -- this
should have been a part of r355424.
Reproted by: Klaus Küchemann <maciphone2@googlemail.com>
The recent rpi-firmware update renamed "0" to "zero" in the RPi0 DTB
filename
It also included the components needed to boot the RPi4, so install those
now -- interested parties can install sysutils/u-boot-rpi4 and copy
config_rpi4.txt to config.txt on the FAT partition in order to boot the
board. Do note that we currently don't support ethernet/usb/pci.
Reviewed by: manu
MFC after: 3 days
to full filesystem. This makes the size of the arm64 SoC images
consistent with armv6 and armv7.
MFC after: 3 days
Sponsored by: The FreeBSD Foundation
Currently, the installer uses pre-created 800KB FAT12 filesystems that
it dd's onto the ESP partition.
This changeset improves that by having the installer generate a FAT32
filesystem directly onto the ESP using newfs_msdos and then copying
loader.efi into /EFI/freebsd.
For live installs it then runs efibootmgr to add a FreeBSD boot entry
in the BIOS.
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D17947
Add a configuration for PINEBOOK image.
Pinebook is a arm64 laptop based on a Pine64 board.
Since the usb trackpad need a quirk, add a common function for adding
quirk for arm board.
A default one is supplied as most board to not need quirks.
Reviewed by: gjb
MFC after: 1 month
Differential Revision: https://reviews.freebsd.org/D18337
Pine64 isn't produced anymore but Pine64-LTS is.
This image works on the LTS release and the Sopine module.
Reviewed by: gjb
Relnotes: yes
Differential Revision: https://reviews.freebsd.org/D16487
This reduce the per-board arm_install_uboot to just install u-boot.
While here remove the installation of rpi.dtb and rpi2.dtb as we load
them from the UFS partition via ubldr.
Reviewed by: gjb, imp (older version)
MFC after: 3 days
Differential Revision: https://reviews.freebsd.org/D16239
boot1.efi have some trouble to read MBR partitions, it needs them to be
aligned a certain way while loader.efi can cope with them either way.
We want to switch to loader.efi as the main efi loader everywhere, it seems
that arm64 using MBR partition will be the guinea pig.
Tested On: RPI3, Pine64
Reviewed by: imp
Approved by: gjb
RPI* 32bits and RPI* 64bits have a different config.txt
Copy to correct config.txt to the fat partition of the release image.
Also copy pwm.dtbo as some people want to use it.
Reviewed by: gjb
This makes it easier to identify the individual partition types and
facilitates comparisons across architectures.
Reviewed by: gjb
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
have moved from the u-boot-rpi3 share directory to the default
rpi-firmware share directory. Remove the files from UBOOT_FILES
and append the DTB file to a DTB_FILES list so the correct path
is used, fixing a build failure.
Sponsored by: The FreeBSD Foundation
The Pine64 root filesystem was incorrectly created directly on the MBR
partition. This can cause the loader to get confused when loading the
kernel from this filesystem.
The loader will see this as a small partition meaning later checks to
ensure it doesn't read past the end of the disk incorrectly report a
failure. This seems to work mostly by accident with the released images as
they are smaller than the reported size, however after growfs has run the
image may no longer boot.
Reviewed by: gjb, emaste, imp
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D14343
This changes the build OBJDIR from the older style of /usr/obj/<srcdir> for
native builds, and /usr/obj/<target>.<target_arch>/<srcdir> for cross builds to
a new simpler format of /usr/obj/<srcdir>/<target>.<target_arch>. This
new format is used regardless of cross or native build. It allows
easier management of multiple source tree object directories.
The UNIFIED_OBJDIR option will be removed and its feature made permanent
for the 12.0 release.
Relnotes: yes (don't note UNIFIED_OBJDIR option since it will be removed)
Prior work: D3711 D874
Reviewed by: gjb, sjg
Discussed at: https://lists.freebsd.org/pipermail/freebsd-arch/2016-May/017805.html
Discussed with: emaste
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D12840
There's not much practical difference as far as install media is
concerned but newfs creates UFSv2 by default and it is sensible to use
the contemporary UFS version.
I also intend to change makefs to create UFSv2 by default (to match
newfs) so we'll want make-memstick.sh to be explicit, rather than
relying on the host tool's default.
Reviewed by: andrew, gjb, jhibbits
MFC after: 2 weeks
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D12231
This Makefile relies on Makefile.fat providing the correct value for
BOOT1_MAXSIZE and BOOT1_OFFSET. Since BOOT1_OFFSET had no default value
here the build would already fail if Makefile.fat did not provide
correct values.
Sponsored by: The FreeBSD Foundation
- Rename chroot_arm_armv6_build_release() to chroot_arm_build_release()
and make it hardware agnostic (such as armv6 -vs- armv7 -vs- arm64).
- Evaluate EMBEDDED_TARGET differently so release/tools/arm.subr can
be used for arm/armv6 and arm64/aarch64.
- Update comments and copyright.
In release/tools/arm.subr:
- In arm_create_disk(), change the default alignment from 63 to 512k,
fixing a boot issue on arm64 and EFI. [1]
- Update comments and copyright.
Add a RPI3 configuration file, pieces obtained from Crochet.
Obtained from: Crochet [1]
MFC after: 5 days
X-MFC-Note: maybe
Sponsored by: The FreeBSD Foundation
