skip the actual type 1 length (6 bytes). With this change, it is now possible
to correctly spot the VAT partition map in certain discs.
Submitted by: Pedro Martelletto <pedro@ambientworks.net>
one byte less than needed.
This is a RELENG_x_y candidate, since it fixes a problem with Oracle 10.
Noticed by: Dmitry Ganenko <dima@apk-inform.com>
Testcase by: Dmitry Ganenko <dima@apk-inform.com>
Reviewed by: des
Submitted by: rdivacky
Sponsored by: Google SoC 2006
MFC after: 1 week
- remove call to getmntopts(), and just pass -o options to
nmount(). This removes some confusion as to what options
msdosfs can parse, by pushing the responsibility of option parsing
to the VFS and FS specific code in the kernel.
msdosfs_vfsops.c:
- add "force" and "sync" to msdosfs_opts. They used to be specified
in mount_msdosfs.c, so move them here. It's not clear whethere these
options should be placed into global_opts in vfs_mount.c or not.
Motivated by: marcus
Correct a bug in the handling of backslash characters in smbfs which can
allow an attacker to escape from a chroot(2). [2]
Security: FreeBSD-SA-06:15.ypserv [1]
Security: FreeBSD-SA-06:16.smbfs [2]
will allow the NFS server to call vfs_stdcheckexp() on the exported nullfs
filesystem, not the underlying filesystem being nullfs mounted.
If the lower filesystem was not NFS exported, then the NFS exported
null filesystem would not work.
Pointed out by: scottl
PR: kern/87906
MFC after: 1 week
If B_NOCACHE is set the pages of vm backed buffers will be invalidated.
However clean buffers can be backed by dirty VM pages so invalidating them
can lead to data loss.
Add support for flush dirty page in the data invalidation function
of some network file systems.
This fixes data losses during vnode recycling (and other code paths
using invalbuf(*,V_SAVE,*,*)) for data written using an mmaped file.
Collaborative effort by: jhb@,mohans@,peter@,ps@,ups@
Reviewed by: tegge@
MFC after: 7 days
if a process's uid or gid has changed, but the /proc/<PID> directory
itself was also set to mode 0. Assuming this doesn't open any
security holes, open access to the /proc/<PID> directory for users
other than root to read or search the directory.
Reviewed by: des (back in February)
MFC after: 3 weeks
mount(2) system call:
* Add cmount hook to fdescfs and pseudofs (and, by extension, procfs and
linprocfs). This (mostly) restores the ability to mount these
filesystems using the old mount(2) system call (see below for the
rest of the fix).
* Remove not-NULL check for the data argument from the mount(2) entry
point. Per the mount(2) man page, it is up to the individual
filesystem being mounted to verify data. Or, in the case of procfs,
etc. the filesystem is free to ignore the data parameter if it does
not use it. Enforcing data to be not-NULL in the mount(2) system call
entry point prevented passing NULL to filesystems which ignored the
data pointer value. Apparently, passing NULL was common practice
in such cases, as even our own mount_std(8) used to do it in the
pre-nmount(2) world.
All userland programs in the tree were converted to nmount(2) long ago,
but I've found at least one external program which broke due to this
(presumably unintentional) mount(2) API change. One could argue that
external programs should also be converted to nmount(2), but then there
isn't much point in keeping the mount(2) interface for backward
compatibility if it isn't backward compatible.
rather than panicking later. This can occur if the kernel calls
vn_open() on a fifo, as there will be no associated file descriptor,
and therefore the file descriptor operations cannot be modified to
point to the fifo operation set.
MFC after: 3 days
Reported by: Martin <nakal at nurfuerspam dot de>
PR: 94278
processing, this actually means there's a double slash recorded in the
symbolic link's path name. We used to start over from / then, which
caused link targets like ../../bsdi.1.0/include//pathnames.h to be
interpreted as /pathnahes.h. This is both contradictionary to our
conventional slash interpretation, as well as potentially dangerous.
The right thing to do is (obviously) to just ignore that element.
bde once pointed out that mistake when he noticed it on the
4.4BSD-Lite2 CD-ROM, and asked me for help.
Reviewed by: bde (about half a year ago)
MFC after: 3 days
Otherwise a kernel build would break in the coda5 module if the main
kernel conf file enabled CODA_COMPAT_5, too. Redefined symbols are
strictly disallowed by -Werror.
To overcome this issue, introduce a different symbol indicating coda5
build, CODA5_MODULE, and translate it to CODA_COMPAT_5 appropriately
in /sys/coda/coda.h.
MFC after: 3 days
- Reorder the events in exit(2) slightly so that we trigger the S_EXIT
stop event earlier. After we have signalled that, we set P_WEXIT and
then wait for any processes with a hold on the vmspace via PHOLD to
release it. PHOLD now KASSERT()'s that P_WEXIT is clear when it is
invoked, and PRELE now does a wakeup if P_WEXIT is set and p_lock drops
to zero.
- Change proc_rwmem() to require that the processing read from has its
vmspace held via PHOLD by the caller and get rid of all the junk to
screw around with the vmspace reference count as we no longer need it.
- In ptrace() and pseudofs(), treat a process with P_WEXIT set as if it
doesn't exist.
- Only do one PHOLD in kern_ptrace() now, and do it earlier so it covers
FIX_SSTEP() (since on alpha at least this can end up calling proc_rwmem()
to clear an earlier single-step simualted via a breakpoint). We only
do one to avoid races. Also, by making the EINVAL error for unknown
requests be part of the default: case in the switch, the various
switch cases can now just break out to return which removes a _lot_ of
duplicated PRELE and proc unlocks, etc. Also, it fixes at least one bug
where a LWP ptrace command could return EINVAL with the proc lock still
held.
- Changed the locking for ptrace_single_step(), ptrace_set_pc(), and
ptrace_clear_single_step() to always be called with the proc lock
held (it was a mixed bag previously). Alpha and arm have to drop
the lock while the mess around with breakpoints, but other archs
avoid extra lock release/acquires in ptrace(). I did have to fix a
couple of other consumers in kern_kse and a few other places to
hold the proc lock and PHOLD.
Tested by: ps (1 mostly, but some bits of 2-4 as well)
MFC after: 1 week
associated with the passed in pfs_node. If it does return a pointer, it
keeps the process locked. This allows a lot of places that were calling
pfind() again right after pfs_visible() to not have to do that and avoids
races since we don't drop the proc lock just to turn around and lock it
again. This will become more important with future changes to fix races
between procfs/ptrace and exit(2). Also, removed a duplicate pfs_visible()
call in pfs_getextattr().
Reviewed by: des
MFC after: 1 week
vop_lock_post do not trigger.
- Rearrange null_inactive to null_hashrem earlier so there is no chance
of finding the null node on the hash list after the locks have been
switched.
- We should never have a NULL lowervp in null_reclaim() so there is
no need to handle this situation. panic instead.
MFC After: 1 week
- Simplify the logic dealing with recycled vnodes in null_hashget() and
null_hashins(). Since we hold the lower node locked in both cases
the null node can not be undergoing recycling unless reclaim somehow
called null_nodeget(). The logic that was in place was not safe and
was essentially dead code.
MFC After: 1 week
directory. vrele() may lock the passed vnode, which in these cases would
give an invalid lock order of child -> parent. These situations are
deadlock prone although do not typically deadlock because the vrele
is typically not releasing the last reference to the vnode. Users of
vrele must consider it as a call to vn_lock() and order it appropriately.
MFC After: 1 week
Sponsored by: Isilon Systems, Inc.
Tested by: kkenn
last few days. I tracked it down to the fact that nfs_reclaim()
is setting vp->v_data to NULL _before_ calling vnode_destroy_object().
After silence from the mailing list I checked further and discovered
that ufs_reclaim() is unique among FreeBSD filesystems for calling
vnode_destroy_object() early, long before tossing v_data or much
of anything else, for that matter. The rest, including NFS, appear
to be identical, as if they were just clones of one original routine.
The enclosed patch fixes all file systems in essentially the same
way, by moving the call to vnode_destroy_object() to early in the
routine (before the call to vfs_hash_remove(), if any). I have
only tested NFS, but I've now run for over eighteen hours with the
patch where I wouldn't get past four or five without it.
Submitted by: Frank Mayhar
Requested by: Mohan Srinivasan
MFC After: 1 week
POSIX. This also makes the struct correct we ever implement an i386-time64
architecture. Not that we need too.
Reviewed by: imp, brooks
Approved by: njl (acpica), des (no objects, touches procfs)
Tested with: make universe
since mount_smbfs(8) assumed long name mounting by default unless "-n long"
was explicitly specified.
Rather than supplying a "long" option in mount_smbfs(8), this commit brings
back the original behaviour by associating SMBFS_MOUNT_NO_LONG with the
"nolong" option. This should fix the broken long file names on smbfs people
observed recently.
Reported by: Vladimir Grebenschikov <vova at fbsd dot ru>
Reviewed by: phk
Tested by: Slawa Olhovchenkov <slw at zxy dot spb dot ru>
If the complete reply on the TRANS2_FIND_FIRST2 request fits exactly
into one responce packet, then next call to TRANS2_FIND_NEXT2 will return
zero entries and server will close current transaction. To avoid
subsequent errors we should not perform FIND_CLOSE2 request.
PR: kern/78953
Submitted by: Jim Carroll
synonyms for "shortname" and "longname" mount options. The old
(before nmount()) mount_msdosfs program accepted "shortnames" and "longnames",
but the kernel nmount() checked for "shortname" and "longname".
So, make the kernel accept "shortnames", "longnames", "shortname", "longname"
for forwards and backwarsd compatibility.
Discovered by: Rainer Hurling <rhurlin at gwdg dot de>
The PR and patch have the details. The ultimate fix requires architectural
changes and clarifications to the VFS API, but this will prevent the system
from panicking when someone does "ls /dev" while running in a shell under the
linuxulator.
This issue affects HEAD and RELENG_6 only.
PR: 88249
Submitted by: "Devon H. O'Dell" <dodell@ixsystems.com>
MFC after: 3 days
- Prefer '_' to ' ', as it results in more easily parsed results in
memory monitoring tools such as vmstat.
- Remove punctuation that is incompatible with using memory type names
as file names, such as '/' characters.
- Disambiguate some collisions by adding subsystem prefixes to some
memory types.
- Generally prefer lower case to upper case.
- If the same type is defined in multiple architecture directories,
attempt to use the same name in additional cases.
Not all instances were caught in this change, so more work is required to
finish this conversion. Similar changes are required for UMA zone names.
cache_lookup() has returned a ref'ed and locked vnode since
vfs_cache.c:1.96, dated Tue Mar 29 12:59:06 2005 UTC. This change
is similar to the change made to smbfs_lookup() in smbfs_vnops.c:1.58.
Tested by: "Antony Mawer" ant AT mawer.org
MFC after: 2 weeks
I benchmarked this by simultaneously extracting 4 large tarballs (basically
world images) on a 4-processor AMD64 system, in a malloc-backed md.
With this patch, system time was reduced by 43%, and wall clock time by 33%.
Submitted by: jeff
MFC after: 1 week
cd9660_lookup() that was used to fix an actual race in ufs_lookup.c:1.78.
This is not currently a hazard, but the bug would be activated by
marking cd9660 as MPSAFE.
Requested by: bde
provided in the kernel build directory, fix modules that were
failing to build this way due to not quite correct kernel option
usage. In particular:
ng_mppc.c uses two complementary options, both of which are listed
in sys/conf/files. Ideally, there should be a separate option for
including ng_mppc.c in kernel build, but now only
NETGRAPH_MPPC_ENCRYPTION is usable anyway, the other one requires
proprietary files.
nwfs and smbfs were trying to ensure they were built with proper
network components, but the check was rather questionable.
Discussed with: ru
changes in MD code are trivial, before this change, trapsignal and
sendsig use discrete parameters, now they uses member fields of
ksiginfo_t structure. For sendsig, this change allows us to pass
POSIX realtime signal value to user code.
2. Remove cpu_thread_siginfo, it is no longer needed because we now always
generate ksiginfo_t data and feed it to libpthread.
3. Add p_sigqueue to proc structure to hold shared signals which were
blocked by all threads in the proc.
4. Add td_sigqueue to thread structure to hold all signals delivered to
thread.
5. i386 and amd64 now return POSIX standard si_code, other arches will
be fixed.
6. In this sigqueue implementation, pending signal set is kept as before,
an extra siginfo list holds additional siginfo_t data for signals.
kernel code uses psignal() still behavior as before, it won't be failed
even under memory pressure, only exception is when deleting a signal,
we should call sigqueue_delete to remove signal from sigqueue but
not SIGDELSET. Current there is no kernel code will deliver a signal
with additional data, so kernel should be as stable as before,
a ksiginfo can carry more information, for example, allow signal to
be delivered but throw away siginfo data if memory is not enough.
SIGKILL and SIGSTOP have fast path in sigqueue_add, because they can
not be caught or masked.
The sigqueue() syscall allows user code to queue a signal to target
process, if resource is unavailable, EAGAIN will be returned as
specification said.
Just before thread exits, signal queue memory will be freed by
sigqueue_flush.
Current, all signals are allowed to be queued, not only realtime signals.
Earlier patch reviewed by: jhb, deischen
Tested on: i386, amd64
the UDF specification specifies a logical sectorsize of 2048.
Instead, get it from GEOM.
- When reading the UDF Anchor Volume Descriptor, use the logical
sectorsize of 2048 when calculating the offset to read from, but
use the actual sectorsize to determine how much to read.
- works with reading a DVD disk and a DVD disk image file via mdconfig
- correctly returns EINVAL if we try to mount_udf an audio CD, instead
of panicking inside GEOM when INVARIANTS is set
sys/fs/nwfs/nwfs_vfsop= s.c, introduced with the conversion to
nmount with revision 1.38. This causes mount_nwfs to fail with
the error message:
mount_nwfs: mount error: /mnt/netware: syserr = No such file or directo=
ry
This is caused by a typo on line 178, which specifies "nwfw_args"
rather than "nwfs_args".
Submitted by: Antony Mawer <gnats@mawer.org>
Fat fingers: phk
PR: 86757
MFC: 3 days
There seems to be very little documentary evidence outside this
implementation to suggest a these checks are neccessary, and more
than one camera-formatted flash disk fails the check, but mounts
successfully on most other systems.
Reviewed By: bde@
a fifo. While this did indeed close the race, confirming suspicions
about the nature of the problem, it causes difficulties with blocking
I/O on fifos.
Discussed with: ups
Also spotted by: Peter Holm <peter at holm dot cc>
that socket during open, not the write socket receive buffer. This
might explain clearing of the sb_state SB_LOCK flag seen occasionally
in soreceive() on fifos.
MFC after: 3 days
Spotted by: ups
when we mount and get zero cost if no rules are used in a mountpoint.
Add code to deref rules on unmount.
Switch from SLIST to TAILQ.
Drop SYSINIT, use SX_SYSINIT and static initializer of TAILQ instead.
Drop goto, a break will do.
Reduce double pointers to single pointers.
Combine reaping and destroying rulesets.
Avoid memory leaks in a some error cases.
underlying the POSIX fifo implementation. In 6.x/7.x, fifo access is
moved from the VFS layer, where it was serialized using the vnode
lock, to the file descriptor layer, where access is protected by a
reference count but not serialized. This exposed socket buffer
locking to high levels of parallelism in specific fifo workloads, such
as make -j 32, which expose as yet unresolved socket buffer bugs.
fi_sx re-adds serialization about the read and write routines,
although not paths that simply test socket buffer mbuf queue state,
such as the poll and kqueue methods. This restores the extra locking
cost previously present in some cases, but is an effective workaround
for the instability that has been experienced. This workaround should
be removed once the bug in socket buffer handling has been fixed.
Reported by: kris, jhb, Julien Gabel <jpeg at thilelli dot net>,
Peter Holm <peter at holm dot cc>, others
MFC after: 3 days
Give DEVFS a proper inode called struct cdev_priv. It is important
to keep in mind that this "inode" is shared between all DEVFS
mountpoints, therefore it is protected by the global device mutex.
Link the cdev_priv's into a list, protected by the global device
mutex. Keep track of each cdev_priv's state with a flag bit and
of references from mountpoints with a dedicated usecount.
Reap the benefits of much improved kernel memory allocator and the
generally better defined device driver APIs to get rid of the tables
of pointers + serial numbers, their overflow tables, the atomics
to muck about in them and all the trouble that resulted in.
This makes RAM the only limit on how many devices we can have.
The cdev_priv is actually a super struct containing the normal cdev
as the "public" part, and therefore allocation and freeing has moved
to devfs_devs.c from kern_conf.c.
The overall responsibility is (to be) split such that kern/kern_conf.c
is the stuff that deals with drivers and struct cdev and fs/devfs
handles filesystems and struct cdev_priv and their private liason
exposed only in devfs_int.h.
Move the inode number from cdev to cdev_priv and allocate inode
numbers properly with unr. Local dirents in the mountpoints
(directories, symlinks) allocate inodes from the same pool to
guarantee against overlaps.
Various other fields are going to migrate from cdev to cdev_priv
in the future in order to hide them. A few fields may migrate
from devfs_dirent to cdev_priv as well.
Protect the DEVFS mountpoint with an sx lock instead of lockmgr,
this lock also protects the directory tree of the mountpoint.
Give each mountpoint a unique integer index, allocated with unr.
Use it into an array of devfs_dirent pointers in each cdev_priv.
Initially the array points to a single element also inside cdev_priv,
but as more devfs instances are mounted, the array is extended with
malloc(9) as necessary when the filesystem populates its directory
tree.
Retire the cdev alias lists, the cdev_priv now know about all the
relevant devfs_dirents (and their vnodes) and devfs_revoke() will
pick them up from there. We still spelunk into other mountpoints
and fondle their data without 100% good locking. It may make better
sense to vector the revoke event into the tty code and there do a
destroy_dev/make_dev on the tty's devices, but that's for further
study.
Lots of shuffling of stuff and churn of bits for no good reason[2].
XXX: There is still nothing preventing the dev_clone EVENTHANDLER
from being invoked at the same time in two devfs mountpoints. It
is not obvious what the best course of action is here.
XXX: comment out an if statement that lost its body, until I can
find out what should go there so it doesn't do damage in the meantime.
XXX: Leave in a few extra malloc types and KASSERTS to help track
down any remaining issues.
Much testing provided by: Kris
Much confusion caused by (races in): md(4)
[1] You are not supposed to understand anything past this point.
[2] This line should simplify life for the peanut gallery.
running" panics.
Previously, recursion through the "include" feature was prevented by
marking each ruleset as "running" when applied. This doesn't work for
the case where two DEVFS instances try to apply the same ruleset at
the same time.
Instead introduce the sysctl vfs.devfs.rule_depth (default == 1) which
limits how many levels of "include" we will traverse.
Be aware that traversal of "include" is recursive and kernel stack
size is limited.
MFC: after 3 days
fifo_kqfilter() VOP implementations, since they in theory are used
only on open file descriptors, in which case the ioctls are via
fifo_ioctl_f() and kqueue requests are via fifo_kqfilter_f().
Generate warnings if they are entered for now. These printf()
calls should become panic() calls.
Annotate and re-implement fifo_ioctl_f(): don't arbitrarily
forward ioctls to the socket layer, only forward the ones we
explicitly support for fifos. In the case of FIONREAD, don't
forward the request to the write socket on a read-write fifo, or
the read result is overwritten. Annotate a nasty case for the
undefined POSIX O_RDWR on fifos, in which failure of the second
ioctl will result in the socket pair being in an inconsistent
state.
Assert copyright as I find myself rewriting non-trivial parts of
fifofs.
MFC after: 3 days
be held when entering a kqueue filter for fifos via a socket buffer
event: as such, assert the lock unconditionally rather than acquiring
it conditionall.
MFC after: 3 days
1) fifo_kqfilter() is not actually ever used, it likely should be GC'd.
2) fifo_kqfilter_f() doesn't implement EVFILT_VNODE, so detecting events
on the underlying vnode for a fifo no longer works (it did in 4.x).
Likely, fifo_kqfilter_f() should forward the request to the VFS using
fp->f_vnode, which would work once fifo_kqfilter() was detached from
the vnode operation vector (removing the fifo override).
Discussed with: phk
used when a read filter is requested on a write-only fifo descriptor, or
a write filter is requested on a read-only fifo descriptor. This
permits the filters to be registered, but never raises the event, which
causes kqueue behavior for fifos to more closely match similar semantics
for poll and select, which permit testing for the condition even though
the condition will never be raised, and is consistent with POSIX's notion
that a fifo has identical semantics to a one-way IPC channel created
using pipe() on most operating systems.
The fifo regression test suite can now run to completion on HEAD without
errors.
MFC after: 3 days
according to POSIX, not to mention the fact that it doesn't make sense
(and hence isn't really implemented). This causes the fifo_misc
regression test to succeed.
file descriptor. Otherwise, the read end of a fifo might return that it
is writable (which it isn't).
Only poll the fifo for write events if the fifo attached to a writable
file descriptor. Otherwise, the write end of a fifo might return that
it is readable (which it isn't).
In the event that a file is FREAD|FWRITE (which is allowed by POSIX, but
has undefined behavior), we poll for both.
MFC after: 3 days
to poll the write socket for, the fifo polling code proceeded to poll
for the complete set of events. Use 'levents' instead of 'events' as
the argument to poll, and only poll the write socket if there is
interest in write events.
MFC after: 3 days
while sleeping to allocate fifo state: due to using the vnode lock to
serialize access to a fifo during open, it shouldn't happen (tm).
MFC after: 3 days
some of the options test, specifically the joliet and rockridge tests.
Since the root mount callchain doesn't go through cd9660_cmount, the
default mount options aren't set. Rather than having the main codepath
assume the options are there, test for the absence of the inverted
optioin
e.g. instead of vfs_flagopt(.. "joliet" ..), test for
!vfs_flagopt(.. "nojoliet" ..)
This works for root mount, non-root mount and future nmount cases.
- in cd9660_cmount, remove inadvertent setting of "gens" when "extatt"
was set.
Reported by: grehan, Dario Freni <saturnero at freesbie org>
Tested by: Dario Freni
Not objected to by: phk
MFC after: 3 days
event handler, dev_clone, which accepts a credential argument.
Implementors of the event can ignore it if they're not interested,
and most do. This avoids having multiple event handler types and
fall-back/precedence logic in devfs.
This changes the kernel API for /dev cloning, and may affect third
party packages containg cloning kernel modules.
Requested by: phk
MFC after: 3 days
If a character cannot be converted to DOS code page,
unix2doschr() returned `0'. As a result, unix2dosfn()
was forced to return `0', so we saw a file which was
composed of these characters as `Invalid argument'.
To correct this, if a character can be converted to
Unicode, unix2doschr() now returns `1' which is a magic
number to make unix2dosfn() know that the character
must be converted to `_'.
[2] unix2dosfn()
The above-mentioned solution only works if a file
has both of Unicode name and DOS code page name.
Unicode name would not be recorded if file name
can be settled within 11 bytes (DOS short name)
and if no conversion from Unix charset to DOS code
page has occurred. Thus, FreeBSD can create a file
which has only short name, but there is no guarantee
that the short name contains allways valid characters
because we leave it to people by using mount_msdosfs(8)
to select which conversion is used between DOS code
page and unix charset.
To avoid this, Unicode file name should be recorded
unless a character is an ascii character. This is
the way Windows XP do.
PR: 77074 [1]
MFC after: 1 week
process that caused the clone event to take place for the device driver
creating the device. This allows cloned device drivers to adapt the
device node based on security aspects of the process, such as the uid,
gid, and MAC label.
- Add a cred reference to struct cdev, so that when a device node is
instantiated as a vnode, the cloning credential can be exposed to
MAC.
- Add make_dev_cred(), a version of make_dev() that additionally
accepts the credential to stick in the struct cdev. Implement it and
make_dev() in terms of a back-end make_dev_credv().
- Add a new event handler, dev_clone_cred, which can be registered to
receive the credential instead of dev_clone, if desired.
- Modify the MAC entry point mac_create_devfs_device() to accept an
optional credential pointer (may be NULL), so that MAC policies can
inspect and act on the label or other elements of the credential
when initializing the skeleton device protections.
- Modify tty_pty.c to register clone_dev_cred and invoke make_dev_cred(),
so that the pty clone credential is exposed to the MAC Framework.
While currently primarily focussed on MAC policies, this change is also
a prerequisite for changes to allow ptys to be instantiated with the UID
of the process looking up the pty. This requires further changes to the
pty driver -- in particular, to immediately recycle pty nodes on last
close so that the credential-related state can be recreated on next
lookup.
Submitted by: Andrew Reisse <andrew.reisse@sparta.com>
Obtained from: TrustedBSD Project
Sponsored by: SPAWAR, SPARTA
MFC after: 1 week
MFC note: Merge to 6.x, but not 5.x for ABI reasons
This is good enough to be able to run a RELENG_4 gdb binary against
a RELENG_4 application, along with various other tools (eg: 4.x gcore).
We use this at work.
ia32_reg.[ch]: handle the 32 bit register file format, used by ptrace,
procfs and core dumps.
procfs_*regs.c: vary the format of proc/XXX/*regs depending on the client
and target application.
procfs_map.c: Don't print a 64 bit value to 32 bit consumers, or their
sscanf fails. They expect an unsigned long.
imgact_elf.c: produce a valid 32 bit coredump for 32 bit apps.
sys_process.c: handle 32 bit consumers debugging 32 bit targets. Note
that 64 bit consumers can still debug 32 bit targets.
IA64 has got stubs for ia32_reg.c.
Known limitations: a 5.x/6.x gdb uses get/setcontext(), which isn't
implemented in the 32/64 wrapper yet. We also make a tiny patch to
gdb pacify it over conflicting formats of ld-elf.so.1.
Approved by: re
ioctl numbers in backwards compatability mode. eg: an IOC_IN ioctl with
a size of zero. Traditionally this was what you did before IOC_VOID
existed, and we had some established users of this in the tree, namely
procfs. Certain 3rd party drivers with binary userland components also
have this too.
This is necessary to have 4.x and 5.x binaries use these ioctl's. We
found this at work when trying to run 4.x binaries.
Approved by: re
To check a directory's in-use bitmap bit by bit, we use
a pointer to an 8 bit wide unsigned value.
The index used to dereference this pointer is calculated
by shifting the bit index right 3 bits. Then we do a
logical AND with the bit# represented by the lower 3
bits of the bit index.
This is an idiomatic way of iterating through a bit map
with simple bitwise operations.
This commit fixes the bug that we only checked bits
3:0 of each 8 bit chunk, because we only used bits 1:0
of the bit index for the bit# in the current 8 bit value.
This resulted in files not being returned by getdirentries(2).
Change the type of the bit map pointer from `char *' to
`u_int8_t *'.
perfect solution as the lower vm object can change at unpredictable times
if our lower vp happens to be on another unionfs, etc.
Submitted by: Oleg Sharoiko <os@rsu.ru>
Since the name cache is case-sensitive and msdosfs isn't,
creating a file 'foo' won't invalidate a negative entry for 'FOO'.
There are similar problems related to 8.3 filenames.
A better solution is to override VOP_LOOKUP with a method that
canonicalizes the name, then calls vfs_cache_lookup(). Unfortunately,
it's not quite that simple because vfs_cache_lookup() will call
msdosfs_lookup() on a cache miss, and msdosfs_lookup() needs a way to
get at the original component name.
