Note: Mouse's bthidd.conf record should contain vendor and device IDs
to make proper device detection. If it does not contain IDs,
regenerate record with "Query" command of recent bthidcontrol(8).
Submitted by: Dirk Engling <erdgeist@erdgeist.org>
Reviewed by: emax
Approved by: bapt (mentor), gonzo (mentor)
Differential Revision: https://reviews.freebsd.org/D3702
Extend bthidd.conf format to store vendor and product IDs of remote
Bluetooth HID devices to make possible implementation of device
specific quirks inside bthidd(8).
Add support for querying of this information from device's SDP records
with bthidcontrol(8) "Query" command.
Submitted by: Dirk Engling <erdgeist@erdgeist.org>
Reviewed by: emax
Approved by: bapt (mentor), gonzo (mentor)
Differential Revision: https://reviews.freebsd.org/D3702
To later free the memory, introduce a new variable lnode to track when
this happens.
Submitted by: Thomas Rix <trix@juniper.net>
Reviewed by: emax
Approved by: sjg (mentor)
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D9878
This is influenced by the ath3k driver from linux (circa 2013, this is
how long I've been sitting on this.)
It handles loading in firmware using the newer model, where it assembles
the right set of firmware blobs and board configuration based on the
device list and querying the device.
The older utility could only load in a single image - which sometimes
was ath3k-1.fw and sometimes was ath3k-2.fw. However, the ath3k maintainers
didn't want to keep adding in binaries that were just derivatives with a
separate board config, so they deleted ath3k-2.fw from the Linux firmware
repository and instead, well, did this.
Now, this has been tested against AR3011 and AR3012 NICs from the AR9285+BT
combo up through to the QCA9565+BT combo. It doesn't yet work with the
QCAFN222 NIC as that is some newer chip.
The firmware can be grabbed from https://github.com/erikarn/ath3kfw/ in
the share/firmware/ath3k directory. I'll update this utility over time
to support the newer firmware drops (newer than mid-2013) which should
pull in the QCNFA222 and subsequent chips.
Tested:
* AR9285 + BT
* AR9287 + BT
* AR9485 + BT
* AR9462 + BT
* QCA9565 + BT
Two new functions are provided, bit_ffs_at() and bit_ffc_at(), which allow
for efficient searching of set or cleared bits starting from any bit offset
within the bit string.
Performance is improved by operating on longs instead of bytes and using
ffsl() for searches within a long. ffsl() is a compiler builtin in both
clang and gcc for most architectures, converting what was a brute force
while loop search into a couple of instructions.
All of the bitstring(3) API continues to be contained in the header file.
Some of the functions are large enough that perhaps they should be uninlined
and moved to a library, but that is beyond the scope of this commit.
sys/sys/bitstring.h:
Convert the majority of the existing bit string implementation from
macros to inline functions.
Properly protect the implementation from inadvertant macro expansion
when included in a user's program by prefixing all private
macros/functions and local variables with '_'.
Add bit_ffs_at() and bit_ffc_at(). Implement bit_ffs() and
bit_ffc() in terms of their "at" counterparts.
Provide a kernel implementation of bit_alloc(), making the full API
usable in the kernel.
Improve code documenation.
share/man/man3/bitstring.3:
Add pre-exisiting API bit_ffc() to the synopsis.
Document new APIs.
Document the initialization state of the bit strings
allocated/declared by bit_alloc() and bit_decl().
Correct documentation for bitstr_size(). The original code comments
indicate the size is in bytes, not "elements of bitstr_t". The new
implementation follows this lead. Only hastd assumed "elements"
rather than bytes and it has been corrected.
etc/mtree/BSD.tests.dist:
tests/sys/Makefile:
tests/sys/sys/Makefile:
tests/sys/sys/bitstring.c:
Add tests for all existing and new functionality.
include/bitstring.h
Include all headers needed by sys/bitstring.h
lib/libbluetooth/bluetooth.h:
usr.sbin/bluetooth/hccontrol/le.c:
Include bitstring.h instead of sys/bitstring.h.
sbin/hastd/activemap.c:
Correct usage of bitstr_size().
sys/dev/xen/blkback/blkback.c
Use new bit_alloc.
sys/kern/subr_unit.c:
Remove hard-coded assumption that sizeof(bitstr_t) is 1. Get rid of
unrb.busy, which caches the number of bits set in unrb.map. When
INVARIANTS are disabled, nothing needs to know that information.
callapse_unr can be adapted to use bit_ffs and bit_ffc instead.
Eliminating unrb.busy saves memory, simplifies the code, and
provides a slight speedup when INVARIANTS are disabled.
sys/net/flowtable.c:
Use the new kernel implementation of bit-alloc, instead of hacking
the old libc-dependent macro.
sys/sys/param.h
Update __FreeBSD_version to indicate availability of new API
Submitted by: gibbs, asomers
Reviewed by: gibbs, ngie
MFC after: 4 weeks
Sponsored by: Spectra Logic Corp
Differential Revision: https://reviews.freebsd.org/D6004
These are no longer needed after the recent 'beforebuild: depend' changes
and hooking DIRDEPS_BUILD into a subset of FAST_DEPEND which supports
skipping 'make depend'.
Sponsored by: EMC / Isilon Storage Division
Off by default, build behaves normally.
WITH_META_MODE we get auto objdir creation, the ability to
start build from anywhere in the tree.
Still need to add real targets under targets/ to build packages.
Differential Revision: D2796
Reviewed by: brooks imp
ASIZE() was never used, and min() stopped being used in r207812.
Differential Revision: https://reviews.freebsd.org/D2230
Reviewed by: emax
Approved by: emax
MFC after: 1 week
So far, we were always using HID_USAGE() to determine the Usage ID of a
certain HID report input item. This does not work as intended if a field
is an array and the allowed usages are specified with a usage range, as
HID_USAGE() will return 0. We need to use the field value as an index in
the usage range list in this case instead.
This makes the volume keys in a Microsoft Bluetooth Mobile Keyboard
5000 be properly recognized. The relevant part of the HID report looks
like this:
0xA1, 0x01, // Collection (Application)
0x85, 0x07, // Report ID (7)
0x05, 0x0C, // Usage Page (Consumer)
0x19, 0x00, // Usage Minimum (Unassigned)
0x2A, 0xFF, 0x03, // Usage Maximum (0x03FF)
0x95, 0x01, // Report Count (1)
0x75, 0x10, // Report Size (16)
0x15, 0x00, // Logical Minimum (0)
0x27, 0xFF, 0x03, 0x00, 0x00, // Logical Maximum (1023)
0x81, 0x00, // Input (Data,Array,Abs,No Wrap,Linear,Preferred
// State,No Null Position)
When a key such as "volume down" is pressed, the following data is
transferred through Interrupt In:
0x07 0xEA 0x00
Differential Revision: https://reviews.freebsd.org/D2229
Reviewed by: emax
Approved by: emax
MFC after: 1 week
shifts into the sign bit. Instead use (1U << 31) which gets the
expected result.
This fix is not ideal as it assumes a 32 bit int, but does fix the issue
for most cases.
A similar change was made in OpenBSD.
Discussed with: -arch, rdivacky
Reviewed by: cperciva
