1
0
mirror of https://git.FreeBSD.org/src.git synced 2024-12-05 09:14:03 +00:00
Commit Graph

180 Commits

Author SHA1 Message Date
David E. O'Brien
53d52f0b40 Add SOFTUPDATES to GENERIC (BOOTMFS has this filtered out) 2000-07-15 06:06:42 +00:00
Matt Jacob
08a7e04845 Removing commented out devices I added. 2000-07-10 15:18:20 +00:00
Matt Jacob
a4846ce28f Add in the commented out SCSI device entries of
#device         ses             # SCSI Environmental Services (and SAF-TE)
#device         targ            # SCSI Target Mode Code
#device         targbh          # SCSI Target Mode Blackhole Device
#define         pt              # SCSI Processor Target Device

so that people know that they are there.
2000-07-08 07:05:06 +00:00
Peter Wemm
1bce768912 Report the line number where gethints.pl does not understand something
in an old device line.
2000-06-26 09:08:23 +00:00
Mark Murray
15bbdecf2e Get the build bits right for the new Architecture Independant null- and
entropy drivers.
Reviewed by:	dfr(mostly)
2000-06-25 09:18:13 +00:00
Andrew Gallatin
126a0c9569 Add UP1000 to GENERIC 2000-06-19 21:55:42 +00:00
Peter Wemm
c46d792d58 Deal with quoted arguments. This hack parser uses whitespace to delimit
fields, not lex/yacc grammar so it is not an exact match but should be
close enough for most cases.
Deal with 'port?', 'irq?' style specifications.  These are parsed as
seperate values in lex/yacc in config(8) but tripped up this helper tool.
2000-06-17 20:10:55 +00:00
Peter Wemm
7ebe1c3acf Use while (<>) instead of while(<STDIN>) so that perl will automagically
deal with filename arguments.  It is amazing how much you forget over time.

Thanks to the people that reminded me this.  I knew there was an easy way
that didn't involve messing with $argv, filehandles, etc, but just could
not remember - all of my books are on the opposite side of the planet..
2000-06-17 19:06:13 +00:00
Peter Wemm
2c7c3a91e9 Print error messages to stderr, not stdout. 2000-06-14 02:45:11 +00:00
Peter Wemm
f71c01cc52 Borrow phk's axe and apply the next stage of config(8)'s evolution.
Use Warner Losh's "hint" driver to decode ascii strings to fill the
resource table at boot time.

config(8) no longer generates an ioconf.c table - ie: the configuration
no longer has to be compiled into the kernel.  You can reconfigure your
isa devices with the likes of this at loader(8) time:
  set hint.ed.0.port=0x320

userconfig will be rewritten to use this style interface one day and will
move to /boot/userconfig.4th or something like that.

It is still possible to statically compile in a set of hints into a kernel
if you do not wish to use loader(8).  See the "hints" directive in GENERIC
as an example.

All device wiring has been moved out of config(8).  There is a set of
helper scripts (see i386/conf/gethints.pl, and the same for alpha and pc98)
that extract the 'at isa? port foo irq bar' from the old files and produces
a hints file.  If you install this file as /boot/device.hints (and update
/boot/defaults/loader.conf - You can do a build/install in sys/boot) then
loader will load it automatically for you.  You can also compile in the
hints directly with:  hints "device.hints"  as well.

There are a few things that I'm not too happy with yet.  Under this scheme,
things like LINT would no longer be useful as "documentation" of settings.
I have renamed this file to 'NOTES' and stored the example hints strings
in it.  However... this is not something that config(8) understands, so
there is a script that extracts the build-specific data from the
documentation file (NOTES) to produce a LINT that can be config'ed and
built.  A stack of man4 pages will need updating. :-/

Also, since there is no longer a difference between 'device' and
'pseudo-device' I collapsed the two together, and the resulting 'device'
takes a 'number of units' for devices that still have it statically
allocated.  eg:  'device fe 4' will compile the fe driver with NFE set
to 4.  You can then set hints for 4 units (0 - 3).  Also note that
'device fe0' will be interpreted as "zero units of 'fe'" which would be
bad, so there is a config warning for this.  This is only needed for
old drivers that still have static limits on numbers of units.
All the statically limited drivers that I could find were marked.

Please exercise EXTREME CAUTION when transitioning!

Moral support by: phk, msmith, dfr, asmodai, imp, and others
2000-06-13 22:28:50 +00:00
John Baldwin
9369c9fb75 Enable USB in GENERIC on the Alpha.
Reviewed by:	deathly silence on -alpha
2000-06-08 01:17:51 +00:00
Brian Feldman
c0c5a953c0 Change sl(4) configuration lines to reflect its new dynamic nature. 2000-05-30 23:01:37 +00:00
Andrew Gallatin
6ab09a6376 Add AlphaServer 2000 (demi-sable), 2100 (sable), and 2100A (lynx) support.
Only PCI and on-board ISA peripherials are supported at this time.

This support has been only lightly tested due to a lack of response to my
call for testers on the freebsd-alpha mailing list.  It works quite well
on the one AS2100 on which it has been tested, but it may not work on
an AS2100A and should therefore be regarded as experimental.
2000-05-28 02:52:54 +00:00
Dan Moschuk
4f14ee00f2 sysctl'ize ICMP_BANDLIM and ICMP_BANDLIM_SUPPRESS_OUTPUT.
Suggested by: des/nbm
2000-05-22 16:12:28 +00:00
Doug Rabson
5c885c3f83 Port ppc driver to alpha.
Submitted by: Andrew M. Miklic <miklic@ibm.net>
2000-05-14 13:47:57 +00:00
Tim Vanderhoek
214d1c55f7 Change to comments only: spell FreeBSD.org correctly 2000-05-13 11:21:19 +00:00
Matt Jacob
4d8f2e9a35 Add option for Rawhide (AlphaServer 4100 systems). 2000-05-07 05:50:27 +00:00
Peter Wemm
085beaf862 Add the COMPAT_OLDPCI option for the alpha so GENERIC compiles. 2000-03-19 13:57:09 +00:00
Matt Jacob
583759a807 Alpha 8200: add DEC_KN8AE (TurboLaser) platform option. 2000-03-18 08:01:34 +00:00
Brian Feldman
60bfc3b09b Do some cleanups of the IPv6 stuff. This is a non-functional change.
Approved by:	jkh
2000-02-27 07:35:42 +00:00
Jordan K. Hubbard
2217c725f9 Enable IPv6 options 2000-02-26 22:13:21 +00:00
Jordan K. Hubbard
4a04162824 Clean up POSIX options, syncronize generics. 2000-02-04 07:02:53 +00:00
Peter Wemm
68b538c712 Remove 'conflicts' token - it has been effectively doing absolutely
nothing for quite some time.  The only thing that cared was userconfig,
but it was for one invisible device so we never saw it's effects.
2000-01-29 18:07:07 +00:00
Warner Losh
173c0f9f5c Mitigate the stream.c attacks
o Drop all broadcast and multicast source addresses in tcp_input.
o Enable ICMP_BANDLIM in GENERIC.
o Change default to 200/s from 100/s.  This will still stop the attack, but
  is conservative enough to do this close to code freeze.

This is not the optimal patch for the problem, but is likely the least
intrusive patch that can be made for this.

Obtained from: Don Lewis and Matt Dillon.
Reviewed by: freebsd-security
2000-01-28 06:13:09 +00:00
Peter Wemm
6bd284603b Remove a no-op "port ?" declaration. 2000-01-24 08:51:16 +00:00
Peter Wemm
3936eee2ff Update GENERIC/SIMOS to leave out the useless trailing digit in pci
and other unwired devices.
2000-01-23 12:22:25 +00:00
Wilko Bulte
29429dde38 updated comments 2000-01-21 20:19:18 +00:00
Wilko Bulte
c0927dd219 Removed outdated comment on experimental nature of ata. Added comment to esp 2000-01-16 18:46:21 +00:00
Wilko Bulte
d8f1ce3873 Correct comments / point to right LINT file (./LINT does not exist for Alpha) 2000-01-16 12:39:24 +00:00
Bill Paul
0177987224 Add device driver support for USB ethernet adapters based on the CATC
USB-EL1202A chipset. Between this and the other two drivers, we should
have support for pretty much every USB ethernet adapter on the market.
The only other USB chip that I know of is the SMC USB97C196, and right
now I don't know of any adapters that use it (including the ones made
by SMC :/ ).

Note that the CATC chip supports a nifty feature: read and write combining.
This allows multiple ethernet packets to be transfered in a single USB
bulk in/out transaction. However I'm again having trouble with large
bulk in transfers like I did with the ADMtek chip, which leads me to
believe that our USB stack needs some work before we can really make
use of this feature. When/if things improve, I intend to revisit the
aue and cue drivers. For now, I've lost enough sanity points.
2000-01-14 03:14:49 +00:00
David E. O'Brien
c201f69bed Sort. 2000-01-12 02:30:42 +00:00
Peter Wemm
d2b1bc7312 Put on my asbestos suit and move $mach/conf/*.$mach to conf/*.$mach as
hinted at in the previous config(8) commits.  I've spoken about this with
a few people and after the initial suprise wore off they thought it wasn't
a bad idea.  The upshot of it is that all the files*, Makefile*, options*
files are all right next to each other in the hope that people making
changes to one set will remember the others.

Note, config(8) looks to sys/conf first, and falls back to sys/$mach/conf
still, so this doesn't stop people working in subdirs for new platforms.
But once it's in the tree it can be moved next to the other files so that
the non-i386 platforms are (hopefully) treated a little better than as if
they were "second class" ports.

This does not change any user editable files.  the config program is
still run in the same directory as before, the per-platform files
(GENERIC, LINT etc) are still in the same place.
2000-01-09 15:29:10 +00:00
KATO Takenori
832f9b3eb4 Synced with sys/i386/conf/Makefile.i386 (MACHINE -> MACHINE_ARCH).
Pointed out by:	peter
2000-01-09 14:56:07 +00:00
Peter Wemm
58fa7951a2 Bump configversion. The controller/device changes are upwards but not
downwards compatable.  If you try and config a s/controller/device/ kernel
with an old config(8), the results will be less than satisfactory.
2000-01-09 07:10:27 +00:00
Peter Wemm
f31f62f872 Further sync Alpha and i386 Makefiles. Remove KERNFORMAT = elf stuff as
it's always true on these platforms (and is likely to be on others as
well since loader is the one that is configured for whatever the boot
requirements are)
2000-01-08 17:31:35 +00:00
Marcel Moolenaar
6257c6285a Sync with i386
\begin{quote}
Compile genassym.c with ordinary ${CFLAGS}.  The (small) needs for
${GEN_CFLAGS} and -U_KERNEL became negative when all all the
genassym.c's were converted to be cross-built.

Makefile.*:
- Cleanups associated with the old genassym.
- Fixed deprecated spelling of ${.IMPSRC} as "$<".
\end{quote}

Submitted by: bde
2000-01-08 16:43:46 +00:00
Peter Wemm
70c43495f8 s/controller/device/ as per config(8) 2000-01-08 16:03:57 +00:00
Marcel Moolenaar
9c0182bbdc Use genassym(1). 2000-01-07 14:58:47 +00:00
Peter Wemm
31f723c7bc Bring the Alpha and x86 Makefiles closer together. 2000-01-07 05:12:12 +00:00
Peter Wemm
d5127a856d Missed s/KERNEL/_KERNEL/ here.. *blush*.
Submitted by:	bde
2000-01-06 13:14:51 +00:00
Bill Paul
dfd1e98eac Add device driver support for USB ethernet adapters based on the
Kawasaki LSI KL5KUSB101B chip, including the LinkSys USB10T, the
Entrega NET-USB-E45, the Peracom USB Ethernet Adapter, the 3Com
3c19250 and the ADS Technologies USB-10BT. This device is 10mbs
half-duplex only, so there's miibus or ifmedia support. This device
also requires firmware to be loaded into it, however KLSI allows
redistribution of the firmware images (I specifically asked about
this; they said it was ok).

Special thanks to Annelise Anderson for getting me in touch with
KLSI (eventually) and thanks to KLSI for providing the necessary
programming info.

Highlights:
- Add driver files to /sys/dev/usb
- update usbdevs and regenerate attendate files
- update usb_quirks.c
- Update HARDWARE.TXT and RELNOTES.TXT for i386 and alpha
- Update LINT, GENERIC and others for i386, alpha and pc98
- Add man page
- Add module
- Update sysinstall and userconfig.c
2000-01-05 04:27:24 +00:00
Matt Jacob
b6ca8f5a13 add wx0 driver 2000-01-04 11:17:35 +00:00
Bill Paul
ed63a7aaef This commit adds device driver support for the ADMtek AN986 Pegasus
USB ethernet chip. Adapters that use this chip include the LinkSys
USB100TX. There are a few others, but I'm not certain of their
availability in the U.S. I used an ADMtek eval board for development.
Note that while the ADMtek chip is a 100Mbps device, you can't really
get 100Mbps speeds over USB. Regardless, this driver uses miibus to
allow speed and duplex mode selection as well as autonegotiation.
Building and kldloading the driver as a module is also supported.

Note that in order to make this driver work, I had to make what some
may consider an ugly hack to sys/dev/usb/usbdi.c. The usbd_transfer()
function will use tsleep() for synchronous transfers that don't complete
right away. This is a problem since there are times when we need to
do sync transfers from an interrupt context (i.e. when reading registers
from the MAC via the control endpoint), where tsleep() us a no-no.
My hack allows the driver to have the code poll for transfer completion
subject to the xfer->timeout timeout rather that calling tsleep().
This hack is controlled by a quirk entry and is only enabled for the
ADMtek device.

Now, I'm sure there are a few of you out there ready to jump on me
and suggest some other approach that doesn't involve a busy wait. The
only solution that might work is to handle the interrupts in a kernel
thread, where you may have something resembling a process context that
makes it okay to tsleep(). This is lovely, except we don't have any
mechanism like that now, and I'm not about to implement such a thing
myself since it's beyond the scope of driver development. (Translation:
I'll be damned if I know how to do it.) If FreeBSD ever aquires such
a mechanism, I'll be glad to revisit the driver to take advantage of
it. In the meantime, I settled for what I perceived to be the solution
that involved the least amount of code changes. In general, the hit
is pretty light.

Also note that my only USB test box has a UHCI controller: I haven't
I don't have a machine with an OHCI controller available.

Highlights:

- Updated usb_quirks.* to add UQ_NO_TSLEEP quirk for ADMtek part.
- Updated usbdevs and regenerated generated files
- Updated HARDWARE.TXT and RELNOTES.TXT files
- Updated sysinstall/device.c and userconfig.c
- Updated kernel configs -- device aue0 is commented out by default
- Updated /sys/conf/files
- Added new kld module directory
1999-12-28 02:01:18 +00:00
Bruce Evans
f11c215715 Synced with Makefile.i386. The following cleanups in Makefile.i386
rev.1.168 should have been committed concurrently:

Fixed some style bugs (always use precisely 1 space after `:' in
dependency specifications).
Removed bogus dependency of ${FULLKERNEL} on ${BEFORE_DEPEND}.

Reminded by:	peter
1999-12-27 12:06:11 +00:00
Peter Wemm
07ed92fb01 Zap the kvm_kernel.db juggling at 'make install' time, it isn't needed
any more.
1999-12-27 07:19:45 +00:00
David E. O'Brien
19b132d78b Turn on the sym' driver by default. It lives well beside the ncr' driver
now.  On one machine with <825a> and <875> controllers, `sym' correctly
attached.  On another one with only a <ncr 53c810 fast10 scsi>, the `ncr'
driver correctly attached.
1999-12-22 05:52:04 +00:00
Peter Wemm
5a81d0a50b Only compile gusc for isa (the #if NISA inside gusc effectively covers
the whole file)
1999-12-21 13:53:49 +00:00
Steve Price
0138b1134c MFS_ROOT is deprecated so use MD_ROOT instead. Also add the md
pseudo-device to make it easier to build releases.
1999-12-20 05:11:51 +00:00
Peter Wemm
574b36f9b7 Be more consistant in using perl vs. perl5. We were using perl5 in the
kernel builds so as not to confuse with perl4 when bootstrapping from old
systems.  I don't know if this is still applicable but it shouldn't hurt
to be consistant at least.

Also copy vnode_if.sh to vnode_if.pl.  Doing a 'sh vnode_if.sh' when it
was a perl script was kinda silly.
1999-12-17 22:07:43 +00:00
Kazutaka YOKOTA
273157da59 - Add the device resume method. It supercedes the existing resume
routine which hooks the apm driver.
- Rename the PSM_HOOKAPM option to PSM_HOOKRESUME.
- Delete unnecessary #include.
1999-12-15 10:04:05 +00:00