KATO Takenori
59e8efa110
Synchronize with sys/i386/isa/sio.c revision 1.158.
1997-02-02 08:09:41 +00:00
KATO Takenori
b8586e15da
- KNFized pc98 specific files.
...
- Disabled unuseinit_cpu_accel_mem() which doesn't work now.
- Deleted extra space at the end of line.
1997-01-31 17:38:58 +00:00
KATO Takenori
7546bbf82e
Synchronize with sys/i386/isa/syscons.c revision 1.200.
1997-01-31 11:24:01 +00:00
KATO Takenori
0e5d7a6941
Synchronize with sys/i386/i386/locore.s revision 1.80.
1997-01-31 11:23:18 +00:00
KATO Takenori
da2c67c4aa
Synchronize with sys/i386/isa/sio.c revision 1.157.
1997-01-30 10:48:06 +00:00
KATO Takenori
d44a313ca1
Synchronize with sys/i386/isa/npx.c revision 1.38.
1997-01-30 10:45:36 +00:00
KATO Takenori
d3e1120fab
Synchronize with sys/i386/isa/clock.c revision 1.75.
1997-01-30 10:44:05 +00:00
KATO Takenori
b3136a8709
Fixed reset port address of PC-9801-108.
...
Submitted by: Chiharu Shibata <chi@rd.njk.co.jp>
1997-01-29 12:42:41 +00:00
KATO Takenori
d00c34d948
Synchronize with sys/i386/conf/options.i386 revision 1.34.
1997-01-28 13:10:22 +00:00
KATO Takenori
6d5d69845a
Change default I/O recovery time for Cyrix 5x86 to 0. The BIOS
...
Writers Guide mentions that IORT should be 0 for errata fix.
1997-01-25 10:37:03 +00:00
KATO Takenori
1817f78ea0
Synchronize with sys/i386/i386/machdep.c rev. 1.226.
1997-01-25 06:42:19 +00:00
KATO Takenori
d8750fa79b
Synchronize with sys/i386/isa/syscons.{c,h} rev. 1.199 and 1.27,
...
respectively.
1997-01-25 06:38:14 +00:00
KATO Takenori
2410185246
Synchronize with sys/i386/isa/if_fe.c rev. 1.26.
1997-01-25 06:33:24 +00:00
KATO Takenori
30fcb6026c
Synchronize with sys/i386/i386/trap.c revision 1.86.
1997-01-23 08:39:59 +00:00
KATO Takenori
2ffc5777b7
Synchronize with sys/i386/isa/syscons.c revision 1.198.
1997-01-21 07:11:14 +00:00
KATO Takenori
7aa571fe7e
Synchronize with sys/i386/isa/syscons.c revision 1.197.
1997-01-20 12:26:04 +00:00
KATO Takenori
86c07de1d7
Synchronize with sys/i386/isa/syscons.c revision 1.196.
1997-01-19 07:46:28 +00:00
KATO Takenori
f533d5bfe1
Re-construct PC-98 code of device_infor[] entries. Enabled all
...
devices which was #ifndef PC98'ed. This makes diff small between
i386/i386/userconfig.c and pc98/i386/userconfig.c.
1997-01-18 15:59:46 +00:00
KATO Takenori
c59a3dbd01
- Changed retry count from 1000000 to 10000 (same as IBM-PC's).
...
- Deleted unnecessary DELAY().
- Deleted space character at the end of line.
1997-01-18 15:51:43 +00:00
KATO Takenori
75ef4c3a5a
Synchronize with sys/i386/conf/files.i386 (revision 1.151).
1997-01-18 10:29:55 +00:00
KATO Takenori
58e44cc813
Synchronize with sys/i386/isa/syscons.c (revision 1.195).
1997-01-18 10:26:43 +00:00
KATO Takenori
b1c7657eef
Synchronize with sys/i386/isa/clock.c (revision 1.74).
1997-01-18 10:25:04 +00:00
KATO Takenori
ece9035f43
Synchronize with sys/i386/i386/machdep.c (revision 1.225).
1997-01-18 10:21:45 +00:00
KATO Takenori
caff639262
Synchronize with sys/i386/i386/userconfig.s (revision 1.82).
1997-01-18 10:16:02 +00:00
KATO Takenori
9124cd1f10
Disabled LPC_ENA related I/O access. This I/O access clobbers i8255
...
mode register on PC98.
1997-01-17 14:43:34 +00:00
KATO Takenori
66548b7ce9
Synchronize with followings:
...
sys/i386/conf/files.i386 revision 1.149
sys/i386/conf/options.i386 revision 1.33
sys/i386/isa/if_fe.c revision 1.25
sys/i386/isa/syscons.c revision 1.194
sys/i386/isa/syscons.h revision 1.26
1997-01-16 14:50:17 +00:00
KATO Takenori
0c6d0cce02
Re-enable ds_subtype, and ds_name (included in #ifdef PC98).
...
Userland programs which access partition information require
ds_subtype and ds_name on PC98.
1997-01-16 05:27:10 +00:00
KATO Takenori
8df4619996
Synchronize with sys/i386/isa/if_ed.c revision 1.112 and
...
sys/i386/isa/if_fe.c revision 1.23 (new if_multiaddrs list).
1997-01-14 12:37:32 +00:00
Jordan K. Hubbard
1130b656e5
Make the long-awaited change from $Id$ to $FreeBSD$
...
This will make a number of things easier in the future, as well as (finally!)
avoiding the Id-smashing problem which has plagued developers for so long.
Boy, I'm glad we're not using sup anymore. This update would have been
insane otherwise.
1997-01-14 07:20:47 +00:00
KATO Takenori
14c138a505
Synchronize with sys/i386/i386/userconfig.c revision 1.80.
1997-01-13 12:32:09 +00:00
KATO Takenori
97fcf1ddb2
Fix typo.
1997-01-11 08:59:45 +00:00
KATO Takenori
079e6754a1
Change initialize routine of Cyrix 5x86 CPU.
...
- Turn off BTB (Branch Target Buffer) because the BTB makes system
unstable on some machines. The BTB feature can be enabled if
"options BTB_EN" is added in kernel a configuration file.
- Change comment.
- Reorder `orb XX,%al's.
- Reset NMI F/F (mask NMI) before setting registers, and set it after
setting them. Normally, this change has no effect.
1997-01-11 07:14:35 +00:00
KATO Takenori
af4342c037
Staticize the functions rtc_inb, rtc_outb, rtc_serialcombit, and
...
rtc_serialcom. These functions are only used by PC98.
1997-01-10 17:11:09 +00:00
KATO Takenori
be832e6c07
Synchronize with sys/i386/isa/ft.c revision 1.29 (fix ft driver
...
panics).
1997-01-10 06:50:47 +00:00
KATO Takenori
fbb488e831
Synchronize with sys/i386/isa/isa.c rev. 1.75.
1997-01-09 13:13:38 +00:00
KATO Takenori
a4e2f35f5a
Synchronize with sys/i386/isa/npx.c revision 1.36 (reenable
...
i586_optimized_copyin/out).
1997-01-05 05:05:43 +00:00
KATO Takenori
c6ee180260
Fix collapse code included in #ifdef WDDEBUG: add `;' at the end of the
...
line, and `"' at the end of first argument of printf().
Submitted by: Michio "Karl" Jinbo <karl@marcer.nagaokaut.ac.jp>
1997-01-04 20:13:41 +00:00
KATO Takenori
d01d65d47a
Fix cursor address calculation.
...
Submitted by: Michio "Karl" Jinbo <karl@marcer.nagaokaut.ac.jp>
1997-01-04 18:02:18 +00:00
KATO Takenori
55c32b9f4f
Delete collapse code to avoid overflow of the number of cylinders.
...
This should be in 2.2 after src/sys/i386/isa/wdreg.h revsion 1.15
(short -> u_short change) is merged.
1997-01-04 10:57:45 +00:00
KATO Takenori
0000fd92fd
(1) Change iomem of SMIT transfer mode from 0xdd000 (BIOS ROM base
...
address+0x1000) into 0xdc000 (BIOS ROM base address).
(2) Add sample line for Logitec LHA-20x SCSI card.
(3) Change I/O port address of ed8 (C-NET(98) card) from 0x00d0 into
0x03d0 (vendor default).
Submitted by: Michio "Karl" Jibo <karl@marcer.nagaokaut.ac.jp>
1997-01-04 09:01:57 +00:00
KATO Takenori
d3191c67bf
Clean-up.
...
Submitted by: Michio "Karl" Jinbo <karl@marcer.nagaokaut.ac.jp>
1997-01-04 08:32:33 +00:00
KATO Takenori
f825359008
Staticize dma_bouncebuf. This variable was kept global because sbic
...
driver used it. The sbic driver has been obsoleted now, so the
variable can be static as that in isa.c.
This is a 2.2 candidate.
1997-01-04 06:48:28 +00:00
KATO Takenori
1cd7883776
Correct I/O port address table for ELECOM LD-BDN ethernet card.
...
Should be in 2.2.
1997-01-04 06:42:43 +00:00
KATO Takenori
a2aded7b8e
Add `#ifdef PC98' to include PC98-specific code. Add declaration of the
...
function rtc_outb().
This is a 2.2 candidate.
1997-01-04 06:38:46 +00:00
KATO Takenori
674d08dbc0
Oops, delete extra push %edi and push %esi in memsize().
...
Submitted by: Michio "Karl" Jinbo <karl@marcer.nagaokaut.ac.jp>
1997-01-03 16:21:08 +00:00
KATO Takenori
c4948ba6a1
Change IMR of master PIC from 0x7f into 0xff in isa_defaultirq().
...
This is a 2.2 candidate.
1997-01-03 07:45:41 +00:00
KATO Takenori
134223b928
Synchronize with sys/i386/isa/npx.c revision 1.35 (disable
...
i586-optimized copyin and copyout).
1996-12-29 08:14:02 +00:00
KATO Takenori
cbecba19cc
Synchronize with sys/i386/i386/machdep.c revision 1.223 (clean-up of
...
useracc call).
1996-12-29 08:10:30 +00:00
KATO Takenori
2cc3289940
Staticize dmapageport and isa_dmarangecheck.
1996-12-27 13:06:31 +00:00
KATO Takenori
d2ff8b7ea8
Synchronize with sys/i386/isa/sio.c revision 1.155 (use breakpoint()
...
instead of Debugger()).
1996-12-24 11:47:52 +00:00