1
0
mirror of https://git.FreeBSD.org/src.git synced 2024-12-24 11:29:10 +00:00
Commit Graph

312 Commits

Author SHA1 Message Date
Attilio Rao
e946b94934 On all the architectures, avoid to preallocate the physical memory
for nodes used in vm_radix.
On architectures supporting direct mapping, also avoid to pre-allocate
the KVA for such nodes.

In order to do so make the operations derived from vm_radix_insert()
to fail and handle all the deriving failure of those.

vm_radix-wise introduce a new function called vm_radix_replace(),
which can replace a leaf node, already present, with a new one,
and take into account the possibility, during vm_radix_insert()
allocation, that the operations on the radix trie can recurse.
This means that if operations in vm_radix_insert() recursed
vm_radix_insert() will start from scratch again.

Sponsored by:	EMC / Isilon storage division
Reviewed by:	alc (older version)
Reviewed by:	jeff
Tested by:	pho, scottl
2013-08-09 11:28:55 +00:00
Attilio Rao
c7aebda8a1 The soft and hard busy mechanism rely on the vm object lock to work.
Unify the 2 concept into a real, minimal, sxlock where the shared
acquisition represent the soft busy and the exclusive acquisition
represent the hard busy.
The old VPO_WANTED mechanism becames the hard-path for this new lock
and it becomes per-page rather than per-object.
The vm_object lock becames an interlock for this functionality:
it can be held in both read or write mode.
However, if the vm_object lock is held in read mode while acquiring
or releasing the busy state, the thread owner cannot make any
assumption on the busy state unless it is also busying it.

Also:
- Add a new flag to directly shared busy pages while vm_page_alloc
  and vm_page_grab are being executed.  This will be very helpful
  once these functions happen under a read object lock.
- Move the swapping sleep into its own per-object flag

The KPI is heavilly changed this is why the version is bumped.
It is very likely that some VM ports users will need to change
their own code.

Sponsored by:	EMC / Isilon storage division
Discussed with:	alc
Reviewed by:	jeff, kib
Tested by:	gavin, bapt (older version)
Tested by:	pho, scottl
2013-08-09 11:11:11 +00:00
Attilio Rao
be99683637 Revert r253939:
We cannot busy a page before doing pagefaults.
Infact, it can deadlock against vnode lock, as it tries to vget().
Other functions, right now, have an opposite lock ordering, like
vm_object_sync(), which acquires the vnode lock first and then
sleeps on the busy mechanism.

Before this patch is reinserted we need to break this ordering.

Sponsored by:	EMC / Isilon storage division
Reported by:	kib
2013-08-05 08:55:35 +00:00
Attilio Rao
3b6714cacb The page hold mechanism is fast but it has couple of fallouts:
- It does not let pages respect the LRU policy
- It bloats the active/inactive queues of few pages

Try to avoid it as much as possible with the long-term target to
completely remove it.
Use the soft-busy mechanism to protect page content accesses during
short-term operations (like uiomove_fromphys()).

After this change only vm_fault_quick_hold_pages() is still using the
hold mechanism for page content access.
There is an additional complexity there as the quick path cannot
immediately access the page object to busy the page and the slow path
cannot however busy more than one page a time (to avoid deadlocks).

Fixing such primitive can bring to complete removal of the page hold
mechanism.

Sponsored by:	EMC / Isilon storage division
Discussed with:	alc
Reviewed by:	jeff
Tested by:	pho
2013-08-04 21:07:24 +00:00
Konstantin Belousov
4f9c9114a3 The vm_fault() should not be allowed to proceed on the map entry which
is being wired now.  The entry wired count is changed to non-zero in
advance, before the map lock is dropped.  This makes the vm_fault() to
perceive the entry as wired, and breaks the fragment which moves the
wire count from the shadowed page, to the upper page, making the code
unwiring non-wired page.

On the other hand, the vm_fault() calls from vm_fault_wire() should be
allowed to proceed, so only drain MAP_ENTRY_IN_TRANSITION from
vm_fault() when wiring_thread is not current.

Reported and tested by:	pho
Reviewed by:	alc
Sponsored by:	The FreeBSD Foundation
MFC after:	2 weeks
2013-07-11 05:58:28 +00:00
Attilio Rao
83b375ea16 Acquire read lock on the src object for vm_fault_copy_entry().
Sponsored by:	EMC / Isilon storage division
Reviewed by:	alc
2013-05-22 15:11:00 +00:00
Alan Cox
c141ae7f49 Relax the object locking in vm_fault_prefault(). A read lock suffices.
Reviewed by:	attilio
Sponsored by:	EMC / Isilon Storage Division
2013-05-17 19:02:36 +00:00
Attilio Rao
89f6b8632c Switch the vm_object mutex to be a rwlock. This will enable in the
future further optimizations where the vm_object lock will be held
in read mode most of the time the page cache resident pool of pages
are accessed for reading purposes.

The change is mostly mechanical but few notes are reported:
* The KPI changes as follow:
  - VM_OBJECT_LOCK() -> VM_OBJECT_WLOCK()
  - VM_OBJECT_TRYLOCK() -> VM_OBJECT_TRYWLOCK()
  - VM_OBJECT_UNLOCK() -> VM_OBJECT_WUNLOCK()
  - VM_OBJECT_LOCK_ASSERT(MA_OWNED) -> VM_OBJECT_ASSERT_WLOCKED()
    (in order to avoid visibility of implementation details)
  - The read-mode operations are added:
    VM_OBJECT_RLOCK(), VM_OBJECT_TRYRLOCK(), VM_OBJECT_RUNLOCK(),
    VM_OBJECT_ASSERT_RLOCKED(), VM_OBJECT_ASSERT_LOCKED()
* The vm/vm_pager.h namespace pollution avoidance (forcing requiring
  sys/mutex.h in consumers directly to cater its inlining functions
  using VM_OBJECT_LOCK()) imposes that all the vm/vm_pager.h
  consumers now must include also sys/rwlock.h.
* zfs requires a quite convoluted fix to include FreeBSD rwlocks into
  the compat layer because the name clash between FreeBSD and solaris
  versions must be avoided.
  At this purpose zfs redefines the vm_object locking functions
  directly, isolating the FreeBSD components in specific compat stubs.

The KPI results heavilly broken by this commit.  Thirdy part ports must
be updated accordingly (I can think off-hand of VirtualBox, for example).

Sponsored by:	EMC / Isilon storage division
Reviewed by:	jeff
Reviewed by:	pjd (ZFS specific review)
Discussed with:	alc
Tested by:	pho
2013-03-09 02:32:23 +00:00
Andrey Zonov
b3a01bdf1f - Add system wide page faults requiring I/O counter.
Reviewed by:	alc
MFC after:	2 weeks
2013-01-28 12:54:53 +00:00
Alan Cox
2863482058 In the past four years, we've added two new vm object types. Each time,
similar changes had to be made in various places throughout the machine-
independent virtual memory layer to support the new vm object type.
However, in most of these places, it's actually not the type of the vm
object that matters to us but instead certain attributes of its pages.
For example, OBJT_DEVICE, OBJT_MGTDEVICE, and OBJT_SG objects contain
fictitious pages.  In other words, in most of these places, we were
testing the vm object's type to determine if it contained fictitious (or
unmanaged) pages.

To both simplify the code in these places and make the addition of future
vm object types easier, this change introduces two new vm object flags
that describe attributes of the vm object's pages, specifically, whether
they are fictitious or unmanaged.

Reviewed and tested by:	kib
2012-12-09 00:32:38 +00:00
Alan Cox
8d22020384 Replace the single, global page queues lock with per-queue locks on the
active and inactive paging queues.

Reviewed by:	kib
2012-11-13 02:50:39 +00:00
Konstantin Belousov
ef45823eba Commit the actual text provided by Alan, instead of the wrong update
in r242011.

MFC after:	1 week
2012-10-24 18:32:37 +00:00
Konstantin Belousov
bc79b37f2c Dirty the newly copied anonymous pages after the wired region is
forked. Otherwise, pagedaemon might reclaim the page without saving
its content into the swap file, resulting in the valid content
replaced by zeroes.

Reported and tested by:	pho
Reviewed and comment update by:	alc
MFC after:	1 week
2012-10-24 18:21:59 +00:00
Konstantin Belousov
5050aa86cf Remove the support for using non-mpsafe filesystem modules.
In particular, do not lock Giant conditionally when calling into the
filesystem module, remove the VFS_LOCK_GIANT() and related
macros. Stop handling buffers belonging to non-mpsafe filesystems.

The VFS_VERSION is bumped to indicate the interface change which does
not result in the interface signatures changes.

Conducted and reviewed by:	attilio
Tested by:	pho
2012-10-22 17:50:54 +00:00
Konstantin Belousov
4d34e019c4 Calculate the count of per-process cow faults. Export the count to
userspace using the obscure spare int field in struct kinfo_proc.

Submitted by:	Andrey Zonov <andrey zonov org>
MFC after:	1 week
2012-05-23 18:10:54 +00:00
Alan Cox
13458803f4 Give vm_fault()'s sequential access optimization a makeover.
There are two aspects to the sequential access optimization: (1) read ahead
of pages that are expected to be accessed in the near future and (2) unmap
and cache behind of pages that are not expected to be accessed again.  This
revision changes both aspects.

The read ahead optimization is now more effective.  It starts with the same
initial read window as before, but arithmetically grows the window on
sequential page faults.  This can yield increased read bandwidth.  For
example, on one of my machines, a program using mmap() to read a file that
is several times larger than the machine's physical memory takes about 17%
less time to complete.

The unmap and cache behind optimization is now more selectively applied.
The read ahead window must grow to its maximum size before unmap and cache
behind is performed.  This significantly reduces the number of times that
pages are unmapped and cached only to be reactivated a short time later.

The unmap and cache behind optimization now clears each page's referenced
flag.  Previously, in the case of dirty pages, if the containing file was
still mapped at the time that the page daemon examined the dirty pages,
they would be reactivated.

From a stylistic standpoint, this revision also cleanly separates the
implementation of the read ahead and unmap/cache behind optimizations.

Glanced at:	kib
MFC after:	2 weeks
2012-05-10 15:16:42 +00:00
John Baldwin
35818d2e94 Add new ktrace records for the start and end of VM faults. This gives
a pair of records similar to syscall entry and return that a user can
use to determine how long page faults take.  The new ktrace records are
enabled via the 'p' trace type, and are enabled in the default set of
trace points.

Reviewed by:	kib
MFC after:	2 weeks
2012-04-05 17:13:14 +00:00
Alan Cox
5730afc9b6 Handle spurious page faults that may occur in no-fault sections of the
kernel.

When access restrictions are added to a page table entry, we flush the
corresponding virtual address mapping from the TLB.  In contrast, when
access restrictions are removed from a page table entry, we do not
flush the virtual address mapping from the TLB.  This is exactly as
recommended in AMD's documentation.  In effect, when access
restrictions are removed from a page table entry, AMD's MMUs will
transparently refresh a stale TLB entry.  In short, this saves us from
having to perform potentially costly TLB flushes.  In contrast,
Intel's MMUs are allowed to generate a spurious page fault based upon
the stale TLB entry.  Usually, such spurious page faults are handled
by vm_fault() without incident.  However, when we are executing
no-fault sections of the kernel, we are not allowed to execute
vm_fault().  This change introduces special-case handling for spurious
page faults that occur in no-fault sections of the kernel.

In collaboration with:	kib
Tested by:		gibbs (an earlier version)

I would also like to acknowledge Hiroki Sato's assistance in
diagnosing this problem.

MFC after:	1 week
2012-03-22 04:52:51 +00:00
Konstantin Belousov
abb9b935ca Use the trick of performing the atomic operation on the contained aligned
word to handle the dirty mask updates in vm_page_clear_dirty_mask().
Remove the vm page queue lock around vm_page_dirty() call in vm_fault_hold()
the sole purpose of which was to protect dirty on architectures which
does not provide short or byte-wide atomics.

Reviewed by:	alc, attilio
Tested by:	flo (sparc64)
MFC after:	2 weeks
2011-09-28 14:57:50 +00:00
Konstantin Belousov
3407fefef6 Split the vm_page flags PG_WRITEABLE and PG_REFERENCED into atomic
flags field. Updates to the atomic flags are performed using the atomic
ops on the containing word, do not require any vm lock to be held, and
are non-blocking. The vm_page_aflag_set(9) and vm_page_aflag_clear(9)
functions are provided to modify afalgs.

Document the changes to flags field to only require the page lock.

Introduce vm_page_reference(9) function to provide a stable KPI and
KBI for filesystems like tmpfs and zfs which need to mark a page as
referenced.

Reviewed by:    alc, attilio
Tested by:      marius, flo (sparc64); andreast (powerpc, powerpc64)
Approved by:	re (bz)
2011-09-06 10:30:11 +00:00
Konstantin Belousov
2801687d56 Add a facility to disable processing page faults. When activated,
uiomove generates EFAULT if any accessed address is not mapped, as
opposed to handling the fault.

Sponsored by:	The FreeBSD Foundation
Reviewed by:	alc (previous version)
2011-07-09 15:21:10 +00:00
Alan Cox
1bfec3dfb6 Revert to using the page queues lock in vm_page_clear_dirty_mask() on
MIPS.  (At present, although atomic_clear_char() is defined by atomic.h
on MIPS, it is not actually implemented by support.S.)
2011-06-23 05:23:59 +00:00
Alan Cox
3c76db4c64 Precisely document the synchronization rules for the page's dirty field.
(Saying that the lock on the object that the page belongs to must be held
only represents one aspect of the rules.)

Eliminate the use of the page queues lock for atomically performing read-
modify-write operations on the dirty field when the underlying architecture
supports atomic operations on char and short types.

Document the fact that 32KB pages aren't really supported.

Reviewed by:	attilio, kib
2011-06-19 19:13:24 +00:00
Konstantin Belousov
af32c4196f Handle the corner case in vm_fault_quick_hold_pages().
If supplied length is zero, and user address is invalid, function
might return -1, due to the truncation and rounding of the address.
The callers interpret the situation as EFAULT. Instead of handling
the zero length in caller, filter it in vm_fault_quick_hold_pages().

Sponsored by:	The FreeBSD Foundation
Reviewed by:	alc
2011-03-25 16:38:10 +00:00
Alan Cox
ff5958e785 For some time now, the kernel and kmem objects have been ordinary
OBJT_PHYS objects.  Thus, there is no need for handling them specially
in vm_fault().  In fact, this special case handling would have led to
an assertion failure just before the call to pmap_enter().

Reviewed by:	kib@
MFC after:	6 weeks
2011-01-15 19:21:28 +00:00
Alan Cox
a5dbab5444 Correct a typo in vm_fault_quick_hold_pages().
Reported by:	Bartosz Stec
2010-12-28 20:02:30 +00:00
Alan Cox
0b47b37621 Retire vm_fault_quick(). It's no longer used.
Reviewed by:	kib@
2010-12-25 23:54:50 +00:00
Alan Cox
82de724fe1 Introduce and use a new VM interface for temporarily pinning pages. This
new interface replaces the combined use of vm_fault_quick() and
pmap_extract_and_hold() throughout the kernel.

In collaboration with:	kib@
2010-12-25 21:26:56 +00:00
Alan Cox
acd11c7499 Introduce vm_fault_hold() and use it to (1) eliminate a long-standing race
condition in proc_rwmem() and to (2) simplify the implementation of the
cxgb driver's vm_fault_hold_user_pages().  Specifically, in proc_rwmem()
the requested read or write could fail because the targeted page could be
reclaimed between the calls to vm_fault() and vm_page_hold().

In collaboration with:	kib@
MFC after:	6 weeks
2010-12-20 22:49:31 +00:00
Edward Tomasz Napierala
ef694c1ac4 Replace pointer to "struct uidinfo" with pointer to "struct ucred"
in "struct vm_object".  This is required to make it possible to account
for per-jail swap usage.

Reviewed by:	kib@
Tested by:	pho@
Sponsored by:	FreeBSD Foundation
2010-12-02 17:37:16 +00:00
Alan Cox
4b0640310a Use vm_page_prev() instead of vm_page_lookup() in the implementation of
vm_fault()'s automatic delete-behind heuristic.
vm_page_prev() is typically faster.
2010-07-02 19:59:18 +00:00
Konstantin Belousov
a6e38685f3 When waiting for the busy page, do not unlock the object unless unlock
cannot be avoided.

Reviewed by:	alc
MFC after:	1 week
2010-05-20 08:51:01 +00:00
Alan Cox
eee9d99231 Push down the acquisition of the page queues lock into vm_pageq_remove().
(This eliminates a surprising number of page queues lock acquisitions by
vm_fault() because the page's queue is PQ_NONE and thus the page queues
lock is not needed to remove the page from a queue.)
2010-05-09 16:55:42 +00:00
Alan Cox
34e7251f10 Minimize the scope of the page queues lock in vm_fault(). 2010-05-08 21:35:51 +00:00
Alan Cox
3c4a24406b Push down the page queues into vm_page_cache(), vm_page_try_to_cache(), and
vm_page_try_to_free().  Consequently, push down the page queues lock into
pmap_enter_quick(), pmap_page_wired_mapped(), pmap_remove_all(), and
pmap_remove_write().

Push down the page queues lock into Xen's pmap_page_is_mapped().  (I
overlooked the Xen pmap in r207702.)

Switch to a per-processor counter for the total number of pages cached.
2010-05-08 20:34:01 +00:00
Alan Cox
03679e2334 Push down the page queues lock into vm_page_activate(). 2010-05-07 15:49:43 +00:00
Alan Cox
9402dff3de Push down the page queues lock into vm_page_deactivate(). Eliminate an
incorrect comment.
2010-05-07 04:14:07 +00:00
Alan Cox
eb00b276ab Eliminate page queues locking around most calls to vm_page_free(). 2010-05-06 18:58:32 +00:00
Alan Cox
5ac59343be Acquire the page lock around all remaining calls to vm_page_free() on
managed pages that didn't already have that lock held.  (Freeing an
unmanaged page, such as the various pmaps use, doesn't require the page
lock.)

This allows a change in vm_page_remove()'s locking requirements.  It now
expects the page lock to be held instead of the page queues lock.
Consequently, the page queues lock is no longer required at all by callers
to vm_page_rename().

Discussed with: kib
2010-05-05 18:16:06 +00:00
Alan Cox
e3ef0d2fcf Push down the acquisition of the page queues lock into vm_page_unwire().
Update the comment describing which lock should be held on entry to
vm_page_wire().

Reviewed by:	kib
2010-05-05 03:45:46 +00:00
Alan Cox
a7283d3213 Add page locking to the vm_page_cow* functions.
Push down the acquisition and release of the page queues lock into
vm_page_wire().

Reviewed by:	kib
2010-05-04 15:55:41 +00:00
Alan Cox
f623e55269 Simplify vm_fault(). The introduction of the new page lock renders a bit of
cleverness by vm_fault() to avoid repeatedly releasing and reacquiring the
page queues lock pointless.

Reviewed by:	kib, kmacy
2010-05-02 20:24:25 +00:00
Alan Cox
b88b6c9d80 It makes no sense for vm_page_sleep_if_busy()'s helper, vm_page_sleep(),
to unconditionally set PG_REFERENCED on a page before sleeping.  In many
cases, it's perfectly ok for the page to disappear, i.e., be reclaimed by
the page daemon, before the caller to vm_page_sleep() is reawakened.
Instead, we now explicitly set PG_REFERENCED in those cases where having
the page persist until the caller is awakened is clearly desirable.  Note,
however, that setting PG_REFERENCED on the page is still only a hint,
and not a guarantee that the page should persist.
2010-05-02 17:33:46 +00:00
Konstantin Belousov
e20e8c1558 Unlock page lock instead of recursively locking it. 2010-04-30 16:20:14 +00:00
Kip Macy
2965a45315 On Alan's advice, rather than do a wholesale conversion on a single
architecture from page queue lock to a hashed array of page locks
(based on a patch by Jeff Roberson), I've implemented page lock
support in the MI code and have only moved vm_page's hold_count
out from under page queue mutex to page lock. This changes
pmap_extract_and_hold on all pmaps.

Supported by: Bitgravity Inc.

Discussed with: alc, jeffr, and kib
2010-04-30 00:46:43 +00:00
Alan Cox
77d6d85393 Setting PG_REFERENCED on a page at the end of vm_fault() is redundant since
the page table entry's accessed bit is either preset by the immediately
preceding call to pmap_enter() or by hardware (or software) upon return
from vm_fault() when the faulting access is restarted.
2010-04-28 06:34:47 +00:00
Konstantin Belousov
3f1c4c4f31 When OOM searches for a process to kill, ignore the processes already
killed by OOM. When killed process waits for a page allocation, try to
satisfy the request as fast as possible.

This removes the often encountered deadlock, where OOM continously
selects the same victim process, that sleeps uninterruptibly waiting
for a page. The killed process may still sleep if page cannot be
obtained immediately, but testing has shown that system has much
higher chance to survive in OOM situation with the patch.

In collaboration with:	pho
Reviewed by:	alc
MFC after:	4 weeks
2010-04-06 10:43:01 +00:00
Alan Cox
79f6ebe233 Properly synchronize the previous change. 2009-11-28 00:50:09 +00:00
Alan Cox
d8778512cf Support the new VM_PROT_COPY option on wired pages. The effect of which
is that a debugger can now set a breakpoint in a program that uses mlock(2)
on its text segment or mlockall(2) on its entire address space.
2009-11-27 22:08:29 +00:00
Alan Cox
e2997fea72 Simplify the invocation of vm_fault(). Specifically, eliminate the flag
VM_FAULT_DIRTY.  The information provided by this flag can be trivially
inferred by vm_fault().

Discussed with:	kib
2009-11-27 20:24:11 +00:00