30GB to 3GB. The raw images can be resized using truncate(1), and
other formats can be resized with tools included with other tools
included with other hypervisors.
Enable the growfs(8) rc(8) at firstboot if the disk was resized
prior to booting the virtual machine for the first time.
Discussed with: several
PR: 232313 (requested in other context)
MFC after: 3 days
Sponsored by: The FreeBSD Foundation
If MACHINE_ARCH doesn't match TARGET_ARCH, and we're not in the special
case of building i386 images on an amd64 host, we need to pull in the
qemu-user-static package; this allows us to run some commands inside
the VM disk image chroot, most notably to install packages.
Reviewed by: gjb
MFC after: 2 weeks
Sponsored by: FreeBSD/EC2 patreon (https://www.patreon.com/cperciva)
to full filesystem. This makes the size of the arm64 SoC images
consistent with armv6 and armv7.
MFC after: 3 days
Sponsored by: The FreeBSD Foundation
This script broke around FreeBSD 11.0 as a result of SWAPMETA no longer
being reported by vmstat -z; but it also needs to be reworked due to the
arrival in EC2 of nvme ephemeral disks.
I'll turn this option back on after I've found time to rewrite the
script in question.
PR: 234686
Reported by: meta@
MFC after: 1 week
Currently, the installer uses pre-created 800KB FAT12 filesystems that
it dd's onto the ESP partition.
This changeset improves that by having the installer generate a FAT32
filesystem directly onto the ESP using newfs_msdos and then copying
loader.efi into /EFI/freebsd.
For live installs it then runs efibootmgr to add a FreeBSD boot entry
in the BIOS.
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D17947
This fixes 'cdrom' target in the case when world was built by user,
and not root.
Reviewed by: imp
Differential revision: https://reviews.freebsd.org/D18414
Add a configuration for PINEBOOK image.
Pinebook is a arm64 laptop based on a Pine64 board.
Since the usb trackpad need a quirk, add a common function for adding
quirk for arm board.
A default one is supplied as most board to not need quirks.
Reviewed by: gjb
MFC after: 1 month
Differential Revision: https://reviews.freebsd.org/D18337
list and remaining references from the script used to create the
MANIFEST file used by bsdinstall(8).
No MFC is planned at this time.
Sponsored by: The FreeBSD Foundation
was removed in r318881 when roff was removed from the base
system.
This results in the doc.txz distribution set containing a
single directory (./) which is empty.
Remove the "Additional documentation" option from the menu
selection of bsdinstall(8), as the plain-text documentation
installed in /usr/share/doc is installed as part of the
packageworld target.
The doc entry has not been removed from EXTRA_DISTRIBUTIONS
in Makefile.inc1, in case its removal triggers an issue with
freebsd-update(8), which is currently aware of the world/doc
component, so the empty doc.txz continues to be created as
a precaution.
Noticed by: rgrimes
MFC after: 2 days
MFC before: 12.0-RC1
Sponsored by: The FreeBSD Foundation
src branch is used when generating the hardware.html page.
MFC after: 3 days
MFC before: 12.0-BETA3
MFC with: r339873
Sponsored by: The FreeBSD Foundation
AVAHI to the list. This fixes the textproc/docproj build
seemingly following FLAVORS being added.
Specifically, the problem with the dependency chain here is:
- textproc/docproj depends on print/cups, which sets AVAHI=on
by default;
- net/avahi-app depends on devel/gobject-introspection, which
requires python3+;
- graphics/netpbm depends on graphics/mesa-libs, which can
only be built with python2.7;
- textproc/docproj depends on a number of graphics ports for
font rendering, etc.
MFC after: 3 days
MFC before: 12.0-BETA3
Sponsored by: The FreeBSD Foundation
This feature is disabled on install media as these generally won't have any
interesting kernels to be listed other than the default kernel, so the
potential performance penalty in these situations likely isn't worth it.
Approved by: re (kib)
target.
The doc/share/mk/doc.commands.mk sets SVN to /usr/local/bin/svn
by default, which is not necessarily installed by the documentation
project textproc/docproj port.
Ensure SVN can be evaluated properly to include the hardware pages
by iterating through /usr/local/bin and /usr/bin and looking for
both svn and svnlite binaries, and pass the SVN variable explicitly
through env(1) in the reldoc target to avoid failures if it does not
exist.
Approved by: re (rgrimes)
Sponsored by: The FreeBSD Foundation
dvd1.iso installation medium from including KDE4 to KDE5, as the
KDE4-based ports have been marked as deprecated in the Ports
Collection.
MFC after: 3 days
Approved by: re (rgrimes)
Sponsored by: The FreeBSD Foundation
lualoader has moved to a model where the user is expected to disable color
as desired, rather than disabling it automatically for serial boots, due to
more wide-spread support for color sequences.
In a similar vain, though also to reduce special cases, lualoader no
longer disables the beastie menu automatically for !x86. This was done in
Forth land with a different loader.rc that simply didn't invoke the menu
routines, thus wasn't necessary.
This set of changes puts release images back to how they would've been
experienced prior to the switch to Lua.
Approved by: re (rgrimes)
the probing and attaching of the PS/2 mouse (not present on EC2) and
keyboard (emulated, but not accessible via EC2).
Note that we disable atkbd0 separately even though during device probing
it shows up as a child of atkbdc0; this is necessary because the device
is also initialized during the early console setup from hammer_time.
This change cuts the kernel boot time on an EC2 c5.4xlarge instance from
7259ms down to 4727 ms.
Approved by: re (marius)
SVN checkout for placement into an EC2 AMI. We only run these if there
is a .svn directory; but in the event that SVN was used to check out a
tree which is then exported over NFS, we were unnecessarily noisy.
Reported by: Andrey Fesenko
MFC after: 3 days
X-MFC-With: r336420, r336433, r336593, r336621,
r336622, r336624, r337394, r337401
There are several scripts and targets solely used to generate install
media, make sure DB_FROM_SRC is used in that case in order to prevent
checking the host database, which is irrelevant when generating
install binaries.
Sponsored by: Citrix Systems R&D
PR: 230459
Reviewed by: gjb
Differential revision: https://reviews.freebsd.org/D16638
to help avoid hard-coding 'python<MAJOR>.<MINOR>' in several
scripts in the client-side scripts.
PR: 230248
MFC after: 3 days
Submitted by: gustavo.scalet@collabora.com
Sponsored by: The FreeBSD Foundation
flag to bsdec2-image-upload instructing it to mark the snapshot of its
root disk as public (which is independent from marking the created AMIs
as public).
Requested by: Amazon
When booting via EFI on arm we have no way to know the dtb file to load
and we always use the one provided from the bootloader.
This works in most case but :
U-Boot have some really old DTB for some boards, the sync from Linux isn't done automatically for all boards
Some boards (like TI BeagleBone series) use one u-boot for all the model and it doesn't embed the DTBs
Some boards (like IMX6 based ones), don't embed the DTB
We want u-boot to load and patch the DTB with the mac address or the display
node enabled or not.
Reviewed by: gjb, imp
Differential Revision: https://reviews.freebsd.org/D16596
The images were renamed from KERNCONF to BOARDNAME when
specified, which would result in an image name of:
12.0-CURRENT-arm-armv7-GENERIC.img
which would then be renamed to use the BOARDNAME for the
SoC the image is targeted to use. BOARDNAME was specified
for all images as of r336994, which now causes the ftp-stage
target to fail, as the rename is no longer necessary.
Sponsored by: The FreeBSD Foundation
Pine64 isn't produced anymore but Pine64-LTS is.
This image works on the LTS release and the Sopine module.
Reviewed by: gjb
Relnotes: yes
Differential Revision: https://reviews.freebsd.org/D16487
Since we have now EFI framebuffer enabled for ARM64 if we boot on a board
with an screen, u-boot will set up a EFI GOP framebuffer and we won't boot
using the serial console.
Also on RPI3 the firmware always setup the framebuffer area resulting in u-boot
always setup the EFI GOP and FreeBSD never using the serial console.
Reviewed by: gjb, lwshu (previous version)
Differential Revision: https://reviews.freebsd.org/D16472
boot.scr is a u-boot script that loads and execute ubldr.bin
If not present u-boot will automatically boot loader.efi which
is already installed.
This means that all armv6/armv7 images are now booted via EFI
Tested-On: RPI-B
Tested-On: RPI2
Tested-On: OrangePi One
Tested-On: All lot of other boards
MFC after: Never
Relnotes: yes
This is not a problem for 12-CURRENT as EFI boot works but it doesn't
for 11.
While here some board arm_install_uboot also copy ubldr.bin et create
firstboot files but it's already done in arm_install_boot
Reviewed by: gjb
MFC after: 3 days
Differential Revision: https://reviews.freebsd.org/D16481
FORCE_PKG_REGISTER is broken so multiple invocation of release.sh for the
same board will fails if /scratch isn't cleaned.
Leave it but deinstall the package first.
Reviewed by: gjb
Differential Revision: https://reviews.freebsd.org/D16513
Using KERNEL made sense when all boards had different kernel configuration.
Now that all of them are using GENERIC use the board name instead
Reviewed by: gjb
Differential Revision: https://reviews.freebsd.org/D16512
