1
0
mirror of https://git.FreeBSD.org/src.git synced 2024-12-24 11:29:10 +00:00
Commit Graph

450 Commits

Author SHA1 Message Date
Nick Hibma
60295bde4c Set OPEN Flag on open.
Make set_config(1) print warning message if it fails.
2000-11-15 10:36:08 +00:00
Nick Hibma
1d8068f94a Fix for powering off a HP DJ950C during printing. As stated by Ian:
When the printer is turned off the pipe write will cause and error,
which causes lpd to close the device and reopen it to clear the error.
After a short while the device will disappear from the bus but lpd will
have opened the ulpt0 port by then. ulpt_status will check for status
without checking the sc->dying flag and panic the kernel when the device
finally disappears from the bus.

Submitted by:	Ian Dowse <iedowse@maths.tcd.ie>
2000-11-07 10:50:34 +00:00
Nick Hibma
540862484b Regen. 2000-11-03 15:19:42 +00:00
Nick Hibma
78faf46e96 Sone -> Sony
Submitted by:	Hiroyuki Aizu <aizu@jaist.ac.jp>
2000-11-03 15:19:00 +00:00
Nick Hibma
4e457f4298 AcerScan 320U's are braindead. Sometimes they do not return strings
descriptors and if they do the strings are nonsense.
2000-11-02 20:42:34 +00:00
Bill Paul
9cf05fe7a1 Close PR #21078: the aue driver was not correctly programming the
multicast filter on the Pegasus chip. Since IPv6 depends a lot
on multicasting, this caused several failures for people trying to
use IPv6 with Pegasus USB ethernet devices.

Submitted by:	Jun Kuriyama <kuriyama@FreeBSD.org>
2000-11-01 18:26:36 +00:00
Nick Hibma
03eb1a83f8 Make the Ricochet modems work through the USB interface.
Tested by:	jim
Obtained from:	NetBSD
2000-11-01 17:35:57 +00:00
Nick Hibma
59490b7d67 Cut&paste bug: Set USBD_SHORT_XFER_OK unconditionally 2000-11-01 00:28:40 +00:00
Nick Hibma
d69d452a55 remove an unused function (and a warning) 2000-10-30 10:58:02 +00:00
Poul-Henning Kamp
cf9fa8e725 Move suser() and suser_xxx() prototypes and a related #define from
<sys/proc.h> to <sys/systm.h>.

Correctly document the #includes needed in the manpage.

Add one now needed #include of <sys/systm.h>.
Remove the consequent 48 unused #includes of <sys/proc.h>.
2000-10-29 16:06:56 +00:00
Poul-Henning Kamp
9f69a4578a Weaken a bogus dependency on <sys/proc.h> in <sys/buf.h> by #ifdef'ing
the offending inline function (BUF_KERNPROC) on it being #included
already.

I'm not sure BUF_KERNPROC() is even the right thing to do or in the
right place or implemented the right way (inline vs normal function).

Remove consequently unneeded #includes of <sys/proc.h>
2000-10-29 14:54:55 +00:00
Poul-Henning Kamp
53ce36d17a Remove unneeded #include <sys/proc.h> lines. 2000-10-29 13:57:19 +00:00
Nick Hibma
2fd84f56d5 The USB scanner driver. To be used together with SANE. 2000-10-25 10:34:38 +00:00
Nick Hibma
bebddc8cd2 Regen. 2000-10-25 10:14:44 +00:00
Nick Hibma
84b3d895ef Sync with NetBSD 2000-10-25 10:13:47 +00:00
Bill Paul
f709eddf9f Convert the USB ethernet drivers to use mutexes. Also convert
usb_ethersubr.c. This module maintains two queues for packets which
are each protected with one mutex. These are all the changes I can
do for now. Removing the USBD_NO_TSLEEP flag doesn't work yet: when
I tried it, the system would usually freeze up after a NIC had been
operating for a while. The usb_ethersubr module itself ought to
go away; this is the next thing I need to test.
2000-10-24 22:38:54 +00:00
Nick Hibma
64b78d815a Bugfix: The data is not stored only in the first cblock, calculate the
length of the data properly. This should be moved into a tty_subr
function.

Also, disanle the setting of the CDC_CM_OVER_DATA flag. It breaks some
modems. I don't think that ther actually is a modem that needs this.

Submitted by:		Brad Karp <bkarp@ICSI.Berkeley.EDU>
2000-10-20 00:35:52 +00:00
Nick Hibma
3cf950d1c5 Regen. 2000-10-20 00:30:01 +00:00
Nick Hibma
9258cec045 Add the Sony MSC Memory Stick Adaptor (in the Sony PCS laptops) 2000-10-20 00:29:21 +00:00
Nick Hibma
ebcc7b37d5 Undo previous commit. <machine/clock.h> is needed for the prototype
for DELAY().
2000-10-16 18:50:00 +00:00
Nick Hibma
8b677600f9 Sync with NetBSD:
Add more Usages.
2000-10-16 17:45:27 +00:00
Nick Hibma
b78cc80b0d Sync with NetBSD:
Add seatbelts.
Be more lenient towards restarting the ports: If a port manages to connect
successfully reset the restartcount.
2000-10-16 17:40:59 +00:00
Poul-Henning Kamp
db7e3af111 Remove unneeded #include <machine/clock.h> 2000-10-15 14:19:01 +00:00
Jun Kuriyama
0a13e042b1 Add missing comma at the end of line. 2000-10-11 01:12:55 +00:00
Bill Paul
00a9155349 Add support for the Kingston KNU101TX 10/100 USB ethernet adapter. We're
up to 11 of these now.
2000-10-10 23:45:17 +00:00
Bill Paul
5a68c7769a regenetate 2000-10-10 23:24:45 +00:00
Bill Paul
5ccd443674 Add vendor ID for Kingston Technology and add device ID for
KNU101TX USB ethernet adapter. (Yes, another one.)
2000-10-10 23:23:54 +00:00
Nick Hibma
8e6f860ac9 Remove unneccessary includes. (phk) 2000-10-10 12:41:46 +00:00
Nick Hibma
b37ba10824 Remove unneeded includes (phk) 2000-10-10 10:56:53 +00:00
Poul-Henning Kamp
f6b5c74c35 Initiate deorbit burn sequence for <machine/mouse.h>.
Replace all in-tree uses with <sys/mouse.h> which repo-copied a few
moments ago from src/sys/i386/include/mouse.h by peter.
This is also the appropriate fix for exo-tree sources.

Put warnings in <machine/mouse.h> to discourage use.
November 15th 2000 the warnings will be converted to errors.
January 15th 2001 the <machine/mouse.h> files will be removed.
2000-10-09 08:08:36 +00:00
Poul-Henning Kamp
00d25f512c Initiate deorbit burn sequence for <machine/console.h>.
Replace all in-tree uses with necessary subset of <sys/{fb,kb,cons}io.h>.
This is also the appropriate fix for exo-tree sources.

Put warnings in <machine/console.h> to discourage use.
November 15th 2000 the warnings will be converted to errors.
January 15th 2001 the <machine/console.h> files will be removed.
2000-10-08 21:34:00 +00:00
Nick Hibma
3c703fcbe2 Add HP PhotoSmart C500 id.
PR:	kern/21841
Submitted by:	josh@zipperup.org
2000-10-08 21:31:39 +00:00
Nick Hibma
0e4b6a048e Regen. 2000-10-07 11:11:12 +00:00
Nick Hibma
43c34ce5bf Sync with NetBSD. More ids, more! 2000-10-07 11:10:53 +00:00
Nick Hibma
6e89fb0ce1 Regen. 2000-10-07 11:02:25 +00:00
Nick Hibma
9c30aace70 Zyxel keyboard Id 2000-10-07 11:01:54 +00:00
Nick Hibma
9aafd69b2f Regen. 2000-10-05 23:11:13 +00:00
Nick Hibma
4614ea8720 Additional Ids 2000-10-05 23:09:48 +00:00
Bill Paul
7d326fa793 Tweak the aue driver so that the homePNA PHYs will be detected and
attached by the pnaphy driver. This seems to work fine with my sample
ADMtek adapter (which has both 10/100 ethernet and homePNA connectors
and hardware).
2000-09-22 18:53:05 +00:00
Bill Paul
46f1212df0 Add support for D-Link DSB-650 USB ethernet adapter. 2000-09-06 19:35:01 +00:00
Bill Paul
d5b5ec1bcf Regenerate. 2000-09-06 19:28:47 +00:00
Bill Paul
349b8c9813 Add new device ID for the D-Link DSB-650 USB ethernet adapter. This is
a pegasus device, which has product ID 0xABC1. I'm not sure why they
changed it; there's already an entry for a DSB-650TX.
2000-09-06 19:28:27 +00:00
Masahide MAEKAWA
d762e7af21 Regen. 2000-09-05 16:01:34 +00:00
Masahide MAEKAWA
a892b1899f Add product ID (Prolific ATAPI-4 Bridge Controller).
Reported by: "K.Sumitani" <sumitani@bd2.hnes.nec.co.jp>
2000-09-05 16:00:55 +00:00
Nick Hibma
361e87effa Regen. 2000-09-05 12:28:33 +00:00
Nick Hibma
b8a22e4b74 Fix typo's 2000-09-05 12:26:37 +00:00
Nick Hibma
5e1f755037 Loads of scanner Ids. 2000-09-05 12:24:05 +00:00
Peter Wemm
f1998090a4 Regenerate 2000-09-05 01:10:33 +00:00
Nick Hibma
329474c7de Support for RBC devices, like Sony Memory Sticks.
Not extensively tested yet, so be warned.

Submitted by:	Gerd Knops <gerti@bitart.com>
2000-09-04 15:34:14 +00:00
Nick Hibma
21ca942f09 Add the id for the Sony memory sticks. 2000-09-04 15:29:42 +00:00